A study of Eu2O3, Sc2O3 co-doped tungsten matrix impregnated cathode

Eu₂O₃ and Sc₂O₃ co-doped W matrix impregnated cathodes have been prepared by the powder metallurgy method. The constitution of active elements on activated cathode surface is analyzed by in-situ Auger electron spectroscopy. It is found that although Eu exists in the matrix, no Eu is found on the cathode surface due to the formation of a stable Eu containing compound. Sc, Ba and O diffuse to the surface of the cathode and form an active surface layer during the activation period whereas the stable Eu-compound cannot liberate free Eu, which can diffuse from the cathode to the surface. The active substance of Sc, Ba and O on the cathode surface contribute to the emission property.     

Enhanced superconducting properties of Eu2O3-doped MgB2

Bulk polycrystalline samples of Eu₂O₃-doped MgB₂ have been synthesized by a standard solid state reaction route and their structural and superconducting properties have been investigated. As a function of Eu₂O₃ content we have found a significant increase in the critical current density (J_c) and the irreversibility field (H_irr) in the magnetic field range 0–6 T. The XRD results reveal the presence of MgO and EuB₆ secondary phases along with the main hexagonal phase of MgB₂. The strain values and the lattice distortions have been found to increase almost linearly with the nominal Eu₂O₃ content. The observed significant improvement in J_c(H) and H_irr in the Eu₂O₃-doped MgB₂ samples, thus is mainly attributed to the lattice distortions introduced by Eu₂O₃ doping.     

Effect of rare earth (Pr2O3, Nd2O3, Sm2O3, Eu2O3, Gd2O3 and Er2O3 ) on the acoustic properties of glass belonging to bismuth-borate system

Bismuth-borate glasses doped with some rare earth ions were studied with respect to the density, molar volume and the elastic moduli, Poisson’s ratio, Debye temperature, microhardness, softening temperature, acoustic impedance, diffusion constant and latent heat of melting. Ultrasonic velocities were measured by the pulse echo overlap technique at a frequency of 10 MHz and at room temperature. From these velocities and density values, various elastic moduli were calculated. The correlation of elastic stiffness, the cross link density, and the fractal bond connectivity of these glasses are discussed. The derived experimental values of shear modulus, bulk modulus, Young’s modulus, and Poisson’s ratio for our glasses are compared with the theoretically calculated values in terms of the bond compression model and Makishima-Mackenize theory.     

Electrical properties of thin films of Eu2O3 substituted compounds

Europium oxide (Eu₂O₃) substituted compound has been prepared by solid-solid reaction of the powders of Eu₂O₃, BaCO₃ and CuO at 950°C for 16 hours. The thin films have been deposited by high vacuum evaporation technique (vacuum ≈ 10⁻⁶ torr). The variation of current (I) with voltage (V) at room temperature (RT) i.e. 294 K and in ice (273 K) are found to be linear. The variation of electrical resistivity (ρ) with temperature (T) by heating the sample above RT has been determined. Resistivity is found to decrease with increase in temperature. Further the variation of electrical resistivity (ρ) with temperature (T) from 77 K, liquid nitrogen temperature (LNT), to 270 K has also been determined. It is observed that resistivity suddenly becomes zero at around 87 K. Thus the prepared material has superconducting properties with superconducting transition temperature, T _c at 87 K.      

Successive preparation of decorated zinc oxide organic sol by pulsed laser ablation and their luminescence characteristics

Nano-ZnO organic sols which were modified in situ were successively produced through focused pulsed laser ablation of ZnO target in interface of solid and flowing liquid which contained modification agents or polymer. It is found that the ZnO ethanol sol decorated by Q (8-hydroxylquinoline) radiates intense green light under ultraviolet radiation and has a broad emission band centered at 555 nm in the emission fluorescence spectrum. The influence of factors including different modification agents and their added methods, laser fluence, aging time after preparation, compositions of flowing liquid and their velocity on luminescence characteristics of nano-ZnO organic sol was characterized by TEM, UV-vis and fluorescence spectrum.     

Growth and characterization of Y2O3 thin films

Y₂O₃ thin films were grown on silicon (1 0 0) substrates by pulsed-laser deposition at different substrate temperatures and O₂ pressures. The structure and composition of films are studied by using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Y₂O₃ thin films deposited in vacuum strongly oriented their [1 1 1] axis of the cubic structure and the film quality depended on the substrate temperature. The magnitude of O₂ pressure obviously influences the film structure and quality. Due to the silicon diffusion and interface reaction during the deposition, yttrium silicate and SiO₂ were formed. The strong relationship between composition and growth condition was discussed.     

Luminescence studies on ZnO-P2O5 glasses doped with Gd2O3:Eu nanoparticles and Eu2O3

Zinc phosphate glasses doped with Gd₂O₃:Eu nanoparticles and Eu₂O₃ were prepared by conventional melt-quench method and characterized for their luminescence properties. Binary ZnO-P₂O₅ glass is characterized by an intrinsic defect centre emission around 324 nm. Strong energy transfer from these defect centres to Eu³⁺ ions has been observed when Eu₂O₃ is incorporated in ZnO-P₂O₅ glasses. Lack of energy transfer from these defect centres to Eu³⁺ in Gd₂O₃:Eu nanoparticles doped ZnO-P₂O₅ glass has been attributed to effective shielding of Eu³⁺ ions from the luminescence centre by Gd-O-P type of linkages, leading to an increased distance between the luminescent centre and Eu³⁺ ions. Both doped and undoped glasses have the same glass transition temperature, suggesting that the phosphate network is not significantly affected by the Gd₂O₃:Eu nanoparticles or Eu₂O₃ incorporation.     

Variable-temperature Raman scattering and X-ray diffraction studies of Bi3.25Nd0.75Ti3O12 ceramics

Neodymium-substituted bismuth titanate (Bi_3.25Nd_0.75Ti₃O₁₂, BNT_0.75) ceramics was prepared by chemical co-precipitation along with calcinations. The lattice instability has been investigated by variable-temperature Raman scattering and X-ray diffraction. The results showed that there was an orthorhombic to pseudo-tetragonal phase transition at about 695 K, in terms of the evolution of temperature dependence of Raman scattering frequencies. Some changes at about 695 K in the XRD lines, the lattice parameters (a, b, and c) as well as the orthorhombic distortion b/a have been detected in the high temperature X-ray diffraction, which confirmed the conclusion that the BNT_0.75 ceramics undergoes a ferroelectric to paraelectric phase transition at about 695 K.     

Characteristics of sandwich-structured Al2O3/HfO2/Al2O3 gate dielectric films on ultra-thin silicon-on-insulator substrates

Sandwich-structure Al₂O₃/HfO₂/Al₂O₃ gate dielectric films were grown on ultra-thin silicon-on-insulator (SOI) substrates by vacuum electron beam evaporation (EB-PVD) method. AFM and TEM observations showed that the films remained amorphous even after post-annealing treatment at 950 °C with smooth surface and clean silicon interface. EDX- and XPS-analysis results revealed no silicate or silicide at the silicon interface. The equivalent oxide thickness was 3 nm and the dielectric constant was around 7.2, as determined by electrical measurements. A fixed charge density of 3 × 10¹⁰ cm⁻² and a leakage current of 5 × 10⁻⁷A/cm² at 2 V gate bias were achieved for Au/gate stack /Si/SiO₂/Si/Au MIS capacitors. Post-annealing treatment was found to effectively reduce trap density, but increase in annealing temperature did not made any significant difference in the electrical performance.     

Formation of V2O3 nanocrystals by thermal reduction of V2O5 thin films

We report the formation of homogeneous and stable V₂O₃ nanocrystals, directly from V₂O₅ thin films, at 600 °C, as observed by using in situ electron microscopy experiments. Thermally-induced reduction of V₂O₅ thin films in vacuum is remarkably different when compared to reduction of V₂O₅ single crystals and results in the formation of nanophase V₂O₃. Thermally grown V₂O₃ nanocrystals exhibit hexagon or square shape and are stable at higher temperature as well as room temperature. The formation of stable nanocrystals through the reduction process in a non-chemical environment (vacuum) could provide a basis for understanding the complex processes of vanadium oxide phase transitions and for controlling the chemical processes to produce oxide nanocrystals.     

Raman spectroscopy of RuSr2(Eu1.5Ce0.5)Cu2O10 magneto-superconductor

Raman spectroscopy studies are reported for the RuSr₂Eu_1.5Ce_0.5Cu₂O₁₀ (Ru-1222) compound at various temperatures of 300, 250, 200 and 90 K. Three distinct vibrational bands: the first at 110, 140, and 160 cm⁻¹, the second at 295 and 347 cm⁻¹, and third one at 651 cm⁻¹ are seen in Raman spectra of the compound at room temperature. These bands are attached to the Cu atoms’ c-direction, the Ru atoms’ ab-plane stretching and Ru atoms’ c-direction anti-stretching modes. Below 200 K, an extra vibrational mode is also seen at 260 cm⁻¹. Also, with a decrease in temperature, though the Cu vibrational modes remain intact, the Ru atoms’ ab-plane stretching (295 cm⁻¹) and c-direction anti-stretching (651 cm⁻¹) modes shift gradually to higher wave number positions. The frequencies of modes at 260 and 651 cm⁻¹ showed anomalous softening and line-width broadening below 100 K that corroborates well with the spin ordering seen in susceptibility studies. The studied compound is a ferromagnetic superconductor with magnetic ordering of the Ru spins at 200 K and superconductivity below 30 K. A magnetic and electrical transport characterization of the compound is also presented briefly.     

Mechanical stress in ALD-Al2O3 films

Mechanical stress in atomic-layer deposition (ALD)-Al₂O₃ films was investigated at room temperature and during thermal cycling up to 870 °C. The films were generally under tensile stress. Thicker films (25-60 nm) showed a sharp stress increase at about 780-790 °C. X-ray diffraction (XRD)-, X-ray reflectance (XRR)- and X-ray photoelectron spectroscopy (XPS)-measurements indicate an irreversible phase transition from amorphous AlO(OH) to a mixture of different crystalline Al₂O₃-phases. Annealing at higher temperatures leads to a stress reduction as a result of diffusion and recovery processes. The stress behaviour of thinner films (<20 nm) during thermal cycling is quite different. Tensile stress increases with increasing temperature and decreases to nearly the same value during cooling down. The process is continuous and reversible.     

Intrinsic magnetic properties of In2O3 and transition metal-doped-In2O3

This paper reports on the influence of the sintering temperature and atmosphere and transition-metal doping on the magnetic properties of nanocrystalline and bulk In₂O₃. Undoped nanocrystalline In₂O₃ is diamagnetic whatever the sintering temperature and atmosphere. All single-phase transition-metal-doped In₂O₃ samples are paramagnetic, with a paramagnetic effective moment originating from weakly interacting transition metal ions. No trace of ferromagnetism has been detected even with samples sintered under argon, except extrinsic ferromagnetism for samples with magnetic dopant concentrations exceeding the solubility limit.     

Structural and optical properties of nanoparticulate Y2O3:Eu2O3 made by microwave plasma synthesis

Nanoparticulate Y₂O₃:Eu₂O₃ with a small, uniform particle size and a well-defined composition was synthesized using a low temperature microwave plasma process. The structural evolution and the luminescence properties were studied in different states of annealing and Eu₂O₃ addition using X-ray diffraction, transmission electron microscopy, and UV-photoluminescence spectroscopy. As synthesized, the samples were amorphous and showed only weak luminescence. Subsequent annealing steps from 500°C to 800°C lead to the formation and growth of cubic Y₂O₃:Eu₂O₃ nanocrystals (5–20 nm) and a concomitant strong increase of the luminescence yield already at small grain sizes in the range of 10 nm. No self-quenching effects were observed up to 11 mol% Eu₂O ₃.     

Microstructure and interfacial properties of HfO2-Al2O3 nanolaminate films

High-k HfO₂-Al₂O₃ composite gate dielectric thin films on Si(1 0 0) have been deposited by means of magnetron sputtering. The microstructure and interfacial characteristics of the HfO₂-Al₂O₃ films have been investigated by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and spectroscopic ellipsometry (SE). Analysis by XRD has confirmed that an amorphous structure of the HfO₂-Al₂O₃ composite films is maintained up to an annealing temperature of 800 °C, which is much higher than that of pure HfO₂ thin films. FTIR characterization indicates that the growth of the interfacial SiO₂ layer is effectively suppressed when the annealing temperature is as low as 800 °C, which is also confirmed by spectroscopy ellipsometry measurement. These results clearly show that the crystallization temperature of the nanolaminate HfO₂-Al₂O₃ composite films has been increased compared to pure HfO₂ films. Al₂O₃ as a passivation barrier for HfO₂ high-k dielectrics prevents oxygen diffusion and the interfacial layer growth effectively.     

Dielectric dispersion in PbO-Sb2O3-As2O3:V2O5 glasses

Dielectric properties, viz. dielectric constant ε′, loss tan δ and a.c conductivity σ_ac (over a wide range of frequency and temperature) and dielectric breakdown strength of PbO-Sb₂O₃-As₂O₃ glasses doped with V₂O₅ (ranging from 0 to 0.5 mol%) are studied. Analysis of these results, based on optical absorption and ESR spectra, indicates that the insulating strength of the glasses is comparatively high when the concentration of V₂O₅ is about 0.3 mol% in the glass matrix.     

Optical and crystal-field analysis of Er ion in Y2O3-P2O5 thin films

Luminescence spectra of erbium ions doped in Y₂O₃-P₂O₅ thin films, with different P₂O₅ content (from 3% to 47%), were analysed with crystal-field Hamiltonian model with D_2d symmetry including J-mixing effect. The empirical crystal-field parameters (CFPs) obtained for the best fit of calculated to experimental energy levels allows us to confirm the well-established YPO₄ phase for 47% of P₂O₅. The CFPs are compared to those calculated for Ce³⁺, Nd³⁺ and Dy³⁺ in the YPO₄ host. This work is a continuation of our previous results for erbium-doped Y₂O₃ thin films.     

Fabrication, morphology, and photoluminescence properties of GaN nanowires and nanorods by ammoniating Ga2O3/V films on Si(1 1 1)

GaN nanowires and nanorods have been successfully synthesized on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga₂O₃/V films at 900 °C in a quartz tube. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectrum were carried out to characterize the structure, morphology, and photoluminescence properties of GaN sample. The results show that the GaN nanowires and nanorods with pure hexagonal wurtzite structure have good emission properties. The growth direction of nanostructures is perpendicular to the fringes of (1 0 1) plane. The growth mechanism is also briefly discussed.     

Synthesis and characterization of wire-like and near-spherical Eu2O3-doped Y2O3 phosphors by solvothermal reaction

Eu₂O₃-doped yttrium oxide (3 mol%) [Y₂O₃:Eu(3 mol%)] with wire-like and near-spherical morphologies were prepared by a solvothermal treatment using water, ethanol, ethylene glycol and glycerol as reaction media followed by calcination. The powders prepared in water and ethanol possessed wire structure, where the powder treated in water showed high aspect ratio and that in ethanol showed low aspect ratio. The powders prepared in ethylene glycol and glycerol possessed well-dispersed near-spherical powders, which showed almost the same level of photoluminescence emission intensity as that of submicron particles prepared without solvothermal treatment.     

Synthesis and fine patterning of organic-inorganic composite SiO2-Al2O3 thick films

Organic-inorganic composite SiO₂-Al₂O₃ films have been prepared by sol-gel using methacryloxypropyl trimethoxysilane and aluminum sec-butoxide as the precursors. By introduction of organic groups into the inorganic backbone, the smooth and crack-free films could be readily achieved by a one-step dip-coating process, with the thickness up to 4.6 μm after being post-baked at 200 °C for 2 h. The films presented in an amorphous phase with an acceptable chemical homogeneity. Owing to the formation of chelate rings, the gel films showed a strong photosensitivity to ultraviolet light at 325 nm. The uniform fine patterns of SiO₂-Al₂O₃ thick films could be well defined by ultraviolet light imprinting simply using a mask. These performances of SiO₂-Al₂O₃ films indicate the potential for integrated optical systems.