Determination of trace metals in water using x-ray fluorescence spectrometry

A simple, rapid and accurate method for water analysis is proposed. The analytical procedure for the determination of Fe, Mn, Zn, Cu, Cd, As, Pb and Se in water in concentrations as low as a few ppM involves precipitation with a carrier of the metals by diethyldithiocarbamate (DDTC) or 1-(2-pyridylazo)-2-naphthol (PAN) and filitration through a Millipore filter. The precipitates collected on the filter disc are examined by X-ray fluorescence analysis. PAN is excellent for the determination of several metal ions at the ppM level, and DDTC can be used with tartrate as a masking agent if water samples contain large amounts of iron(III).     

Preconcentration and Determination of Trace Amounts of Heavy Metals in Water Samples Using Membrane Disk and Flame Atomic Absorption Spectrometry

A fast and simple method for preconcentration of Ni^2＋, Cd^2＋, Pb^2＋, Zn^2＋, Cu^2＋ and Co^2＋ from natural water samples was developed. The metal ions were complexed with sodium diethyldithiocarbamate （Na-DDTC）, then adsorbed onto octadecyl silica membrane disk, recovered and determined by FAAS. Extraction efficiency, influence of sample volume and eluent flow rates, effects of pH, amount of Na-DDTC, nature and amount of eluent for elution of metal ions from membrane disk, break through volume and limit of detection have been evaluated. The effect of foreign ions on the percent recovery of heavy metal ions has also been studied. The limit of detection of the proposed method for Ni^2＋, Cd^2＋, Pb^2＋, Zn^2＋, Cu^2＋ and Co^2＋was found to be 2.03, 0.47, 3.13, 0.44, 1.24 and 2.05 ng·mL^-1, respectively. The proposed （DDTC） method has been successfully applied to the recovery and determination of heavy metal ions in different water samples.     

Determination of trace amounts of vanadium(IV) and (V) in water by energy-dispersive x-ray fluorescence spectrometry combined with preconcentration and separation

A method is described for the separation, preconcentration and quantitation of V(IV) and V(V) in water. Vanadium(V) is precipitated with diethyldithiocarbamate (DDTC) at pH 1.8 and V(IV) is precipitated with DDTC at pH 4. The precipitates are collected by vacuum filtration on a membrane filter for quantitation by energy-dispersive x-ray fluorescence spectrometry. Multi-element and single-element calibration curves are prepared and used to evaluate the matrix and mass effects of diverse ions such as Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II). The total amount of metal ions should not exceed about 100 μg. The V(IV) and V(V) are separated completely and recovered quantitatively.     

Displacement-dispersive liquid-liquid microextraction coupled with graphite furnace atomic absorption spectrometry for the selective determination of trace silver in environmental and geological samples

A novel displacement-dispersive liquid-liquid microextraction method was developed for the selective determination of trace silver in complicated samples by graphite furnace atomic absorption spectrometry. This method involves two steps of dispersive liquid-liquid microextraction (DLLME). Firstly, copper ion reacted with diethyldithiocarbamate (DDTC) to form Cu-DDTC complex and extracted with DLLME procedure using carbon tetrachloride (extraction solvent) and methanol (dispersive solvent); then, the sedimented phase was dispersed into the sample solution containing silver ion with methanol and another DLLME procedure was carried out. Because the stability of Ag-DDTC is larger than that of Cu-DDTC, Ag⁺ can displace Cu²⁺ from the pre-extracted Cu-DDTC and thus the preconcentration of Ag⁺ was achieved. Potential interference from co-existing transition metal ions with lower DDTC complex stability was largely eliminated as they cannot displace Cu²⁺ from Cu-DDTC complex. The tolerance limits for the co-existing ions were increased by a long way compared with conventional DLLME. Under the optimal conditions, the limit of detection was 20 ng L⁻¹ (3σ) for silver with a sample volume of 5.0 mL, and an enhancement factor of 72 was achieved. The proposed method was successfully applied to determine of trace silver in some environmental and geological samples with satisfactory results.     

Chemically modified electrode for the determination of gold — an electrochemical and spectrophotometric study

The voltammetric determination of trace amounts of gold has been studied using a chemically modified electrode. The role played by the host molecule attached to a glassy carbon electrode (GCE), i.e. 8,9,17,18-dibenzo-1,7-dioxa-10,13,16-triazacyclooctadecane (DDTC), was examined by electrochemical and spectrochemical techniques. Cathodic stripping voltammetry (CSV) was applied to study the various parameters affecting the affinity of gold ions by a DDTC modified electrode as well as the interference by other ions. Finally, the method has been successfully applied to determine gold traces in a geological sample. In addition, the formation of an AuCl ₄ ^– -DDTC complex was followed and its formation constant was determined by spectrophotometry.     

Study on Determination of Trace Nickel in Water Samples after Separation/enrichment using Microcrystalline Phenolphthalein Loaded with Chelate

The paper presents a novel method for the separation/enrichment of trace Ni²⁺ using microcrystalline phenolphthalein loaded with chelate prior to the determination by spectrophotometry. The effects of different parameters, such as the dosages of phenolphthalein and sodium diethyldithiocarbamate (DDTC), various salts and acidity on the enrichment yield of Ni²⁺ have been investigated to select the experimental conditions. The possible enrichment mechanism of Ni²⁺ was discussed. The results showed that under the optimum conditions, Ni²⁺ could be quantificationally adsorbed on the surface of microcrystalline phenolphthalein in the form of the chelate precipitate of Ni(DDTC)₂, while K⁺, Na⁺, Ca²⁺, Mg²⁺, Zn²⁺, Fe²⁺, Al²⁺, Pb²⁺ and Cd²⁺ could not be adsorbed at all. Therefore, Ni²⁺ was completely separated from the above metal ions in the solution. A new method for the separation/enrichment and determination of trace nickel using microcrystalline phenolphthalein loaded with chelate was established. The proposed method has been successfully applied to the determination of Ni²⁺ in various water samples, and the results agreed well with those obtained by FAAS method.     

Determination of trace palladium in complicated matrices by displacement dispersive liquid-liquid microextraction and graphite furnace atomic absorption spectrometry

We describe a method for displacement dispersive liquid-liquid microextraction (DLLME) along with graphite furnace atomic absorption spectrometry for the determination of Pd(II) in complex environmental samples. In this method, Cu(II) is first complexed with diethyldithiocarbamate (DDTC), and the resultant Cu-DDTC complex added to a sedimented phase and submitted to DLLME. In the second step, the sedimented phase is dispersed into the sample solution containing Pd, and another DLLME procedure is carried out. The Pd ions can displace Cu ions from the pre-extracted Cu-DDTC complex because the stability of the Pd-DDTC complex is higher than that of Cu-DDTC. As a result, Pd is preconcentrated. Potential interferences by transition metal ions of lower complex stability can be largely reduced as they cannot displace Cu from the Cu-DDTC complex. The tolerance limits for such ions are better by 2 to 4 orders of magnitude compared to conventional DLLME. The typical sample volume is 5?mL, and an enhancement factor of 96 and a detection limit (3?s) of 7.6?ng?L-1 are achieved.

Capillary gas chromatography of metal chelates of diethyl dithiocarbamates

Summary Capillary GC of metal chelates of diethyl dithiocarbamate (DDTC) was examined on a methylsilicone DB-1 column, (25 meter, 0.2 mm. i.d) with a film thickness of 0.25 μm. Elution was carried out at the initial column temperature of 180°C and programmed at 5°C min⁻¹ to 260°C. Detection was by FID or ECD. Symmetrical peaks with base line separation were obtained with the metal chelates of copper(II), nickel(II), cobalt(III), manganese(II) and chromium(III). The ECD gave better sensitivity than the FID with a linear calibration range of 5–50 μg mL⁻¹ and detection limits 2.0–6.0 μg mL⁻¹, corresponding to 111–333 pg of metal ion reaching the detector. The method was applied to the determination of metal ions in water and pharmaceutical preparations with a coefficient of variation (CV) within 4.0%. When compared with a standard flame AAS method the results revealed no significant difference.     

离子色谱法分析金属离子的研究进展

综述了离子色谱法(IC)分析金属离子的研究进展,对目前应用于分析金属离子的阳离子交换IC、阴离子交换IC和螯合离子色谱进行了评述。阳离子交换IC是IC分析金属离子的主要形式,固定相为强酸(磺酸)型阳离子交换剂和弱酸(羧酸)型阳离子交换剂,结合适当的检测方法,阳离子交换IC可以测定碱金属、碱土金属、过渡金属、稀土离子、铵离子及低相对分子质量的有机胺类分子等。阴离子交换IC可以分析碱土金属、过渡金属、稀土离子等,对金属离子的分析具有更好的选择性,并可以实现金属离子和无机阴离子的同时测定。螯合离子色谱可以对复杂基体中的痕量金属离子进行测定。引用文献125篇。     

Determination of cadmium and zinc in fertilizer samples by FAAS after solid-phase extraction with freshly precipitated manganese-diethyldithiocarbamate.

Using freshly precipitated manganese-diethyldithiocarbamate (Mn(DDTC)(2)) as a new reagent, a solid phase extraction method (SPE) has been developed for the extraction of Cd(II) and Zn(II) in aqueous fertilizer samples. A sample solution of 300 mL was taken and 0.10 g of freshly precipitated Mn(DDTC)(2) was added. After adding a phosphate buffer solution, the mixture was stirred at 10 min, filtered with a glass filter and washed with deionized water. The solid product containing Mn(DDTC)(2)-Cd(DDTC)(2)-Zn(DDTC)(2) complexes was dissolved in concentrated nitric acid and its volume was made complete up to 10 mL with deionized water. The metal contents of the solution were measured by an atomic-absorption spectrometer.     

Spectrophotometric determination of copper(II), nickel(II) and cobalt(II) as complexes with sodium diethyldithiocarbamate in cationic micellar medium of hexadecyltrimethylammonium salts

The determination of copper(II), nickel(II) and cobalt(II) was carried out as diethyldithiocarbamate (DDTC) complexes in presence of aqueous solutions of cationic surfactants of hexadecyltrimethylammonium bromide, chloride and hydroxide (CTAB, CTAC, CTAOH). The presence of micellar systems avoids the previous step of solvent extraction necessary to the formation of the DDTC complexes in absence of micelles. The influence of the different micellar counterions on the analytical characteristics (sensitivity and detection limits) of the proposed method for spectrophotometric determination of Cu(II), Ni(II) and Co(II) was studied.     

Separation and determination of aluminium by single-column ion-chromatography

A quick, reliable method for the determination of Al(III) in the presence of other metal ions is presented. A Chromatographic system consisting of a low-capacity cation-exchange column, an eluent of diprotonated p-phenylenediamine, and a conductivity detector was used to measure the retention times for various cations. During the course of this work, it was found that Al(III) was eluted later than most bivalent metal ions but earlier than other tervalent metal ions. Therefore the concentration of eluent was adjusted so that an early sharp peak was obtained for Al(III) and the bivalent metal ions were eluted as a group. Through analysis of an NBS standard, as well as of solutions containing Al(III) and other metal ions, the method was shown to be precise, accurate and rapid for determination of Al(III) without interference from common bivalent metal ions.     

示波极谱滴定法测定茶碱的含量

示波极谱滴定法测定茶碱的含量①孟昭仁战永复（吉林师范学院化学系吉林１３２０１３）茶碱系１．３—二甲基嘌呤,氨茶碱系茶碱和乙二胺的复盐,前者为强心利尿药,后者为止喘药,其含量测定方法文献报道皆为重量法［１］,但操作繁琐．本文采用示波极谱滴定法测定茶碱类...     

Application of differential pulse polarography for trace determination of polycytidylic acid in absence and presence of some metal ions

Summary A differential pulse polarographic method has been applied to the determination of trace concentrations of polycytidylic acid (Poly-C) in absence and presence of metal ions. The applicability of differential pulse polarography for the trace determination of the investigated biological compound was examined with regard to the dependence of differential pulse current on various parameters such as pH, pulse amplitude, scan rate and drop time. The selectivity of this technique for the determination of binary and a ternary mixtures of poly-C and some metal ions has been also reported. Limits of detection and quantitation have been calculated for the differential pulse polarographic determination of the poly-C and various metal ions. The validity of this method is supported by the constancy of the i_p/C values and a statistical analysis is included on calibration curve parameters and observed concentration.     

Speciation of Arsenic in Environmental and Biological Samples

A novel arsine generator glass assembly is constructed and reported for the spectrophotometric determination and speciation of arsenic in real samples. In an arsine generator, sodium borohydride is added dropwise to the acidic sample solution and arsine thus formed is reacted with silver diethyldithiocarbamate (Ag‐DDTC) ‐ Tritron‐X (TX‐100) solution in pyridine to form a red coloured complex. The complex showed the absorption maximum at λ_max 540 nm. The molar absorptivity of the method was found to be (1.55) × 10⁴ L mole^?1 cm^?1 at this wavelength. The presence of non‐ionic surfactant, i.e. TX‐100 in the Ag‐DDTC solution, makes the method ≈ 3 times more sensitive than the conventional Ag‐DDTC method. Beer's law is obeyed in the concentration range of 0.05–2.80 mg L^?1 of arsenic. The detection limit of the method was calculated to be 20 μg L^?1 As. Speciation of arsenite from other forms of arsenic in sample solutions was carried out by extraction of arsenite with Pb‐DDTC in chloroform, followed by spectrophotometric determination. After arsenite separation the sample is used for the arsenate determination. Total arsenic was determined by acid decomposition of the same sample. The speciation data were found to be comparable (±2%) with ICP‐MS, with better precision (< 1%). The method has been successfully applied for the speciation of arsenic in drinking water and dust samples of arsenic affecting the Rajnandgaon district of Chhattisgarh, India, and urine and blood samples of patients with arsenical diseases. Concentration of total arsenic in tube‐well water of this area was 3–6 times more than the permissible limit. Dust samples contained less amounts of arsenic than the ground water.     

Selective solid-phase extraction of Cu(II) using freshly precipitated lead diethyldithiocarbamate and its spectrophotometric determination

A new solid-phase extraction method has been developed for the selective extraction of Cu(II) in an aqueous system using freshly precipitated lead diethyldithiocarbamate (Pb(DDTC)₂) as a reagent. The method is based on the quantitative replacement of Pb(II) ions in the solid Pb(DDTC)₂ phase by Cu(II) ions present in aqueous phase. The obtained solid Cu(DDTC)₂ phase was dissolved in chloroform and determined spectrophotometrically at 435 nm. Beer’s law was obeyed over the concentration range of 0.2–5 mg dm⁻³. The molar absorptivity and the Sandell’s sensitivity coefficients of the solutions were 1.0689 × 10⁴ dm³ mol⁻¹ cm⁻¹ and 0.0060 μg cm⁻², respectively. The optimum conditions for each parameter were experimentally determined and possible interferences of various salts were also studied. The method has been validated and applied to determine Cu(II) in various alloys and water samples.     

沉淀/共沉淀-膜富集-X射线荧光法快速分析近岸海水中的重金属

建立了近岸海水中多种重金属(铁、镍、锰、铜、锌及铅)的氢氧化物和硫化物的沉淀/共沉淀-膜富集-X射线荧光测定法.在海水样品中加入沉淀剂,使重金属离子生成氢氧化物或硫化物沉淀.沉淀经过滤截留,富集在膜上,直接以手持式X射线荧光仪检测.富集100 mL水样时,两种沉淀法的测定线性范围均为12.5～400 μg/L,即测定限均为12.5 μg/L.对各重金属浓度为100μg/L的试样连续测定7次,相对标准偏差(RSD)为3.7％～6.4％;氢氧化物沉淀法的检出限在1.32～7.84 μ g/L之间;硫化物沉淀法为1.94～11.0 μg/L.用本方法成功测定了厦门近岸海域及九龙江河口海水中的重金属浓度.基于样品酸化与否及过滤先后顺序的不同,本方法可用于海水和河口水样中可溶态、溶解态及游离态重金属的现场快速分析.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.     

Coulometrische argentometrie : Quantitative bestimmung von chlor-, brom- und jodionen

By electrolytic oxidation of various metal anodes, metal ions can be quantitatively introduced into solution. This process can be used for coulometric determination of anions forming insoluble salts with metal ions.Semimicro and micro determinations of chloride, bromide and iodide ions with electrolytically generated silver ions have been performed at constant current and by a simple apparatus. The end-points have been determined with adsorption indicators, i.e. with dichloro(R)fluorescein for chlorides and eosin for bromides and iodides. The lower concentration limit of applicability of this method depends on the sensitivity of the end-point determination method used.The developed method of coulometric argentometry presents a new possibility for coulometric standardization of volumetric solutions, in conformity with our earlier proposals, as well as a further support for the introduction of the coulomb as a primary standard in all analytical chemistry.