Ultrafast cyclopolymerization for polyene synthesis: living polymerization to dendronized polymers

We discovered that ultrafast cyclopolymerization of 1,6-heptadiyne derivatives reached completion in 1 min using a third-generation Grubbs catalyst. After optimization, this superior catalyst selectively produced conjugated polymers having a five-membered-ring structure with excellent molecular weight control and narrow polydispersity index (PDI). This living polymerization allowed us to prepare fully conjugated diblock copolymers with narrow PDIs. Lastly, this catalyst was active enough to polymerize macromonomers with G-3 dendrons in a living manner as well. This dendronized polymer with a highly regioregular polymer backbone and bulky dendrons was visualized by atomic force microscopy, which revealed the structure of a single molecular wire surrounded by insulating dendrons.     

Monomer sequencing and microstructural analysis on polymers of dimethyl norbornene dicarboxylate and 7‐oxanorbornene dicarboxylic derivatives employing ruthenium catalysts by ring‐opening metathesis polymerization

The physiochemical properties, comonomer sequencing, and regiospecificity of the linkages between monomeric units within homo/copolymers based on 5,6‐di‐substituted norbornene and 7‐oxanorbornene type monomers by ring‐opening metathesis polymerization are reported and correlated to their primary and secondary structural elements. In general, first‐generation Grubbs‐ I1 ruthenium catalyst generates polymers with high trans content that exhibits an extended secondary structure with exo,exo substituents, whereas second‐generation Grubbs‐ I2 catalyst produces polymers with high cis content that forms tight turns, resulting in a compact structure. Furthermore, I2 ‐produced polymers exhibit a high level of alternating cis–trans double bonds along their polymeric backbone. In stark contrast, both first‐ and second‐generation Grubbs catalysts display complete reversal in cis/trans selectivity when an oxygen atom is in position‐7 of the norbornene‐ring along with mono‐endo‐substitution in position‐5 or 6, and hence highlighting the importance of stereoelectronic complexation by the catalyst with the next incoming monomer for cis/trans selectivity. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2477–2501     

ADMET reactions in miniemulsion

This work investigates acyclic diene metathesis (ADMET) polymerization reactions in aqueous miniemulsion. Different types of ruthenium‐based catalysts and different surfactants (anionic, cationic, and nonionic) were evaluated. A Ru‐indenylidene catalyst (Umicore M2) showed higher activity in water if compared to the Ru‐benzylidene catalysts (Hoveyda Grubbs second generation and Grubbs first generation). Moreover, the catalyst activity was affected by the type of the surfactant. In summary, the Umicore M2 catalyst and the nonionic poly(ethylene oxide) based surfactant Lutensol AT80 were found to be the most suitable combination for ADMET reactions in miniemulsion allowing the preparation of polymers with number average molecular weight (M_n) of up to 15 kDa. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1300–1305     

A highly controllable latent ruthenium Schiff base olefin metathesis catalyst: Catalyst activation and mechanistic studies

A ruthenium Schiff base catalyst ( 5 ), bearing an N‐heterocyclic carbene ligand, was found to be a latent catalyst for the ring‐opening metathesis polymerization of cis,cis‐1,5‐cyclooctadiene and dicyclopentadiene and is activated efficiently on addition of hydrochloric acid. A benchmark study was performed using the Grubbs first ( 1 ), second ( 2 ), and third ( 3 ) generation catalyst. Results further illustrate that the catalyst can be stored in dicyclopentadiene at a monomer/catalyst ratio of 15,000/1 without any significant polymerization during at least 12 months. After activation of the catalyst with a Brønsted acid, no undesired loss of performance can be detected. This concept of activation can be easily adapted to a Reaction Injection Molding process, and reaction control is obtained via the in situ generation of the cocatalyst as the outcome of the reaction of alcohols with Lewis acids. Insight into the activation mechanism was gained through an in‐depth nuclear magnetic resonance study, and a plausible mechanism is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 302–310, 2010     

Cyclopolymerization

The background and summary of the events that led to the discovery and confirmation of an unusual and unexpected mode of polymerization of certain vinyl monomers is presented. Originally, the process was described as an alternating intra‐intermolecular chain propagation mechanism. For convenience and because cyclic structures are introduced into the polymer chain, the term cyclopolymerization has been adopted. Early attempts to determine the relationship of cyclopolymerization to stereochemical control and to ladder polymer formation are reviewed. Also, it is pointed out that within 10 years of the introduction of the cyclopolymerization concept, worldwide commercialization of certain cyclopolymers and cyclocopolymers had begun. The extent of the research activity in this area of chemistry and its relationship to commercialization are emphasized. Two areas of research activity that are featured are chirality induction into well‐known polymers and synthesis of conjugated polymers via cyclopolymerization. Both areas are discussed, and suitable examples are included. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3451–3461, 2000     

CYCLOPOLYMERIZATION OF DIPROPARGYL DERIVATIVES BY Cp2MoCl2-EtAlCl2 CATALYST SYSTEM

ABSTRACT

A Cp₂MoCl₂-EtAlCl₂ catalyst system was used for the cyclopolymerization of various dipropargyl derivatives having different functionalities. These catalyst systems were found to be very effective for the polymerization of some dipropargyl monomers to give a relatively high yield of polymer. The polymerization behaviors were strongly dependent on the functionalities of dipropargyl monomers. The polymerization of such dipropargyl monomers as 1,6-heptadiyne, diphenyldipropargyl methane, diethyldipropargyl malonate, etc. proceeded well to give a quantitative yield, whereas this catalyst system was found to be less effective for the polymerization of dipropargyl monomers having perfluoroalkyl groups and quaternary ammonium salts. The polymer structure of the resulting polymers was characterized by various instrumental methods such as NMR, IR, and UV-visible spectroscopies to have a conjugated polyene backbone system with cyclic recurring units. The portion of 5- and 6-membered rings of the present conjugated cyclopolymer were also discussed.     

Ring‐opening metathesis polymerization of cis‐cyanocyclooct‐4‐ene: Search for active catalysts,variation of monomer to catalyst ratios and monomer concentrations

The ring‐opening metathesis polymerization (ROMP) of cis‐cyanocyclooct‐4‐ene initiated by ruthenium‐based catalysts of the first, second, and third generation was studied. For the polymerization with the second generation Grubbs catalyst [RuCl₂(?CHPh)(H₂IMes)(PCy₃)] (H₂IMes = N,N′‐bis(mesityl)‐4,5‐dihydroimidazol‐2‐ylidene), the critical monomer concentration at which polymerization occurs was determined, and variation of monomer to catalyst ratios was performed. For this catalyst, ROMP of cis‐cyanocyclooct‐4‐ene did not show the features of a living polymerization as M_n did not linearly increase with increasing monomer conversion. As a consequence of slow initiation rates and intramolecular polymer degradation, molar masses passed through a maximum during the course of the polymerization. With third generation ruthenium catalysts (which contain 3‐bromo or 2‐methylpyridine ligands), polymerization proceeded rapidly, and degradation reactions could not be observed. Contrary to ruthenium‐based catalysts of the second and third generation, a catalyst of the first generation was not able to polymerize cis‐cyanocyclooct‐4‐ene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

An enhanced host–guest electro‐optical polymer system using poly(norbornene‐dicarboximides) via ROMP

High glass transition temperature poly(N‐cyclohexyl‐5‐norbornene‐2,3‐dicarboximide)s (NDI)s prepared by ring opening metathesis polymerization yielded polymers with a narrow polydispersity and well‐controlled molecular weight materials when using the Grubbs first generation initiator. Polymers produced using the Grubbs second generation initiator could not be controlled easily. By initiator selection it was also possible to synthesize polymers with either 98 or 52% trans microstructures. These materials were employed as electro‐optic (EO) polymer hosts for high molecular hyperpolarizability (β) phenyl vinylene thiophene vinylene bridge chromophores. This chromophore was modified by the incorporation of a tert‐butyldiphenylsilane group. The addition was able to further increase its EO coefficient (r₃₃) to reach 93 pm/V in a trans rich poly(NDI) produced by the Grubbs first generation initiator, compared to a benchmark chromophore / polymer combination. We investigated in detail the relationship between polymer microstructure and their absolute molecular weight on forming the best host–guest with the high β chromophore. Our results indicate that by utilizing a very simple host–guest system a high r₃₃ can be realized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of chalcone‐based fluorescent polymers: Diels‐Alder reaction of chalcones and their polymerization through ROMP

Ring opening metathesis polymerization (ROMP) was carried out on Diels‐Alder adducts formed from reactions between chalcones and cyclopentadiene. Most of the chalcones gave predominantly endo‐adducts and the exo‐adducts were obtained in good yields from reacting cyclopentadiene with furfurylidine acetone and N,N,diethylaminobenzylidine‐(4‐hydroxy)acetophenone. These exo‐adducts were subjected to ROMP using Grubbs catalyst, bis(tricyclohexylphosphine)benzylidinedichloride. The monomers and polymers were characterized using spectroscopic techniques like FT‐IR, ¹HNMR. The polymers were characterized using TGA, DSC, and GPC. The polymers were found to possess fluorescent properties and poly[2‐(4‐diethylamino)phenyl‐3,5‐divinylcyclopentyl](4‐hydroxyphenyl) methanone was found to have good emissive property at two wavelengths. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1521–1531, 2008     

Synthesis of well-defined norbornenyl-terminated poly(alkyl methacrylate)s by group transfer polymerization and their grafting-through ring-opening metathesis polymerization

Highly efficient syntheses of poly(alkyl methacrylate)-based brush polymers were accomplished via a facile group transfer polymerization (GTP) and a consecutive grafting-through ring-opening metathesis polymerization. The GTP system, composed of the norbornenyl-methyl trimethylsilyl ketene acetal initiator and the N-(trimethylsilyl) bis(trifluoromethanesulfonyl)imide catalyst, rapidly and quantitatively generates norbornenyl-terminated poly(alkyl methacrylate) macromonomers with very narrow polydispersities (M_w/M_n < 1.10). The ring-opening metathesis polymerization of methacrylate macromonomers using Grubbs third generation catalyst successfully generated a group of methacrylate-based brush polymers, which assured the high quality of the macromonomers obtained from GTP.     

Synthesis and properties of conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties in the main chain

Novel conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties were synthesized by the hydrosilylation polymerization of 1,4‐bis(3‐ethynyl‐9‐carbazolyl)benzene ( 1 ) with various bis(hydrosilane)s or dihydrosilanes using a rhodium catalyst. Polymers with weight‐average molecular weights ranging from 5400 to 20,000 were obtained in 55–97% yields by the polyaddition with a rhodium catalyst in toluene at 25 °C for 24 h. All the polymers were soluble in CHCl₃ and THF, and had predominantly trans‐structures. The polymers exhibited λ_max at a longer wavelength region than 1 , and emitted fluorescence in 14–50% quantumn yields. The polymers were oxidized and reduced in the region of 0.4–1.6 V, and thermally stable up to 200 °C under air. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1815–1821, 2010     

Postpolymerization modification of polynorbornene side chains via tetramethyl guanidine promoted esterification

We demonstrate that polynorbornene containing primary activated bromide moieties is a novel chemically modifiable platform for postpolymerization modification. Polymer P0 was synthesized via ring‐opening metathesis polymerization of monomer 1 with the assistance of Grubbs third generation (G‐III) catalyst. Subsequently, nucleophilic substitution was conducted by mixing P0 with n‐caproic acid, sorbic acid, m‐toluic acid or 4‐nitrobenzoic acid in the presence of 1,1,3,3‐tetramethylguanidine (TMG) under mild and stoichiometric condition to generate functionalized polymers P1–P4 . NMR results approved full conversion of the reactive sites and exemplified the “click” nature of TMG promoted esterification. Thermal stability and glass transition behaviors of all the polymer samples were investigated by thermal gravimetric analysis and differential scanning calorimetry. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3733–3740     

Spontaneous evolution of nanostructures by light-driven growth of micelles obtained from in situ nanoparticlization of conjugated polymers

To simplify processes to produce self-assembled nanostructures from polymeric materials, there have been several attempts for in situ self-assembly of block copolymers. As one of these strategies, we developed the in situ nanoparticlization of conjugated polymers (INCP) process to construct various stable nanostructures without postsynthetic treatments. To get spontaneous mesoscopic evolution of the nanostructures obtained by INCP, a new strategy utilizing a unique conformational change of the conjugated polymer is reported herein. The combination of living ring-opening olefin metathesis polymerization (ROMP) and cyclopolymerization produced block and gradient copolymers through one-pot or one-shot polymerization, which initially formed spherical micelles via INCP. Then, the core block of the micelle stiffened through a coil-to-rod conformational change by simple aging in organic solvents because of cis-to-trans isomerization of the conjugated polymer under light. Subsequently, this enhanced the π-π interaction among the cores, and eventually promoted the growth of stable nanostructures from spheres to 1D-nanocaterpillars or 2D-sheet-like architectures. This time-dependent macroscopic evolution provides deeper insight into the production of a variety of kinetically fixed nano- and mesoscale structures through INCP. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3058–3066     

Ring opening metathesis polymerization of triazole‐bearing cyclobutenes: Diblock copolymer synthesis and evaluation of the effect of side group size on polymerization kinetics

Cyclobutenes containing pendant groups of varying sizes were polymerized via ring opening metathesis polymerization using Grubbs catalyst 2nd generation (G2). The rate of polymerization depended on the size of the pendant groups attached to the cyclobutene rings, with longer side‐chains producing slower polymerization rates and narrower molecular weight distributions. The polymerization of these new molecules proceeded with first order kinetics, consistent with a living polymerization. Chain extension experiments produced cyclobutene‐based diblock copolymers with polydispersity indices below 1.33. The synthetic methods in this report will allow the use of G2 to access new complex polymeric architectures with a higher density of pendant groups than those derived from norbornene analogs and cyclooctene moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1929–1939     

Acyclic diene metathesis polymerization of tailor-made monomers towards sequence-regulated vinyl copolymers

 Acyclic diene metathesis polymerization (ADMET) enables convenient transfer of sequential information of the designed monomers to the corresponding sequence-regulated copolymers. In this study, two structurally symmetric monomers, M1 and M2, were synthesized via atom transfer radical addition (ATRA) of diethyl meso-2,5-dibromohexanedioate with 1,5-hexadiene and 1,7-octadiene, respectively. Thus, sequenced segment of VB-EA-EA-VB (VB and EA represent vinyl bromide and ethyl acrylate, respectively) was incorporated into the ADMET diene monomers. ADMET polymerization of these two monomers with Grubbs first generation catalyst (Grubbs-I) was performed in CH₂Cl₂ at 40℃ for 5 days under nitrogen purge. Effects of catalyst amount, monomer concentration and methanol precipitation on the M_p and PDI of polymers were investigated by GPC, and the structures of the formed polymers were characterized by NMR. Our results indicate that using 3.0 mol% of Grubbs-I to monomer can afford polymers with high M_p. Moreover, selective precipitation in methanol enables complete removal of low molecular weight components from the crude products. Meanwhile, M2 exhibits higher ADMET polymerization reactivity than M1 due to its capability of suppressing negative neighboring group effect.     

Synthesis of ethylene/vinyl ester copolymers with pendent linear branches via ring‐opening metathesis polymerization of fatty acid‐derived cyclooctenes

Fatty acid‐derived cyclooctenes, including n‐hexanoic acid ( M1 ), n‐octanoic acid ( M2 ), lauric acid ( M3 ), and palmitic acid ( M4 ), were prepared as monomers and polymerized by ring‐opening metathesis polymerization (ROMP) using Grubbs second‐generation catalyst ( G2 ). In all the cases, the regio‐irregular unsaturated polymers with pendent linear branches were obtained, which could be saturated by chemical hydrogenation with TSH/TPA in high conversion, yielding ethylene/vinyl ester copolymers with pendent linear branches on precisely every eighth backbone carbon. Both unsaturated and saturated polymers were amorphous, and their structures were characterized by FTIR, ¹H and ¹³C NMR spectra, and elemental analysis. Differential scanning calorimetry (DSC) and thermo‐gravimetric analysis (TGA) were used to study their thermal properties. The chain length of branches greatly affected the thermal properties of polymers. After hydrogenation, the thermal degradation stability of polymers was relatively improved. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2211–2220     

Effect of limonene on the frontal ring opening metathesis polymerization of dicyclopentadiene

The frontal ring opening metathesis polymerization (FROMP) of dicyclopentadiene (DCPD) in the presence of limonene, using second generation Grubbs’ catalysts, is reported. The effect of limonene on the amount of catalyst and the typical frontal polymerization parameters, as maximum temperature (T_max) and velocity of the front (V_f), is studied. In addition, the influence of limonene on the mechanical properties of the polymeric samples is reported. Finally, a deep study on the swelling properties of polymers is done. It has been demonstrated that limonene acts as both inhibitor and solvent of the catalyst. The T_max, V_f, T_g, and Young modulus values decrease as the amount of limonene increases, and the polymer samples swell in THF depending on the amount of limonene. All results indicate that the limonene addition on FROMP of results in advantages on the polymerization reaction and its parameters and on the final polymer properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 63–68     

Post‐functionalization of perfluorophenyl ester‐functional acyclic diene metathesis polymer

The acyclic diene metathesis (ADMET) polymerization was utilized for the design of the ADMET polymer (M_n = 21,200 g/mol, M_w/M_n = 1.74) with pendant perfluorophenyl ester functionality using Grubbs first generation catalysis overnight in bulk at 80 °C. Next, a wide variety of functional groups, like benzyl, octyl, propargyl, allyl, and furfuryl was quantitatively incorporated to the ADMET polymer backbone through various amines using activated ester substitution reaction. The ADMET polymers studied in this work were characterized using ¹H, ¹³C, and ¹⁹F NMR, GPC and DSC and displayed a monomodal distribution and a rather broad polydispersity index in the range of ?1.33 to 1.90. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2593–2598     

Synthesis and copolymerization of oligo(lactic acid) derived norbornene macromonomers with amino acid derived norbornene monomer: Formation of the 3D macroporous scaffold

Norbornene macromonomers 2 and 3 bearing 10‐ and 20‐mers of lactide were synthesized by ring‐opening polymerization of lactide using 5‐norbornene‐2, 3‐exo‐exo‐dimethanol as an initiator and DBU as a catalyst. Macromonomers 2 and 3 were copolymerized with amino acid derived norbornene monomer 1 , using the Grubbs 2nd generation ruthenium catalyst. The random and block copolymers with M_n's ranging from 28,000 to 180,000 were obtained almost quantitatively where the M_n's of the block copolymers were higher than those of the random ones. Three‐dimensional macroporous structure polymers with average pore size of 10 µm could be found in poly( 1 ) and the block co‐polymer of 1 and 2 or 1 and 3 at the high ratio of 1 . Meanwhile, poly( 2 ) and poly( 3 ) along with block and random copolymers with low ratio of 1 exhibit much larger pores in the range of 50–300 µm. The porosity increased with increase in the unit ratio of 1 . The compressive strength of the porous structure of poly( 2 ) and poly( 3 ) was improved by the copolymerization with 1 . © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1660–1670     

Influence of residual impurities on ring‐opening metathesis polymerization after copper(I)‐catalyzed alkyne‐azide cycloaddition click reaction

Bottlebrush polymers (BBPs) are three‐dimensional polymers with great academic and industrial potential owing to their highly tunable and intricate architecture. The most popular method to synthesize BBPs is ring‐opening metathesis polymerization (ROMP) with Grubbs' catalyst, allowing living grafting‐through polymerization of macromonomers of up to ultrahigh molecular weights with narrow molecular weight distribution. In this case, it has been well recognized that the purity of macromonomers (MMs) is critical for a successful ROMP reaction. For MMs synthesized from reversible‐deactivation radical polymerization, Grubbs and Xia demonstrated that the better control of ROMP reaction can be achieved when they are prepared via “growth‐then‐coupling” method that is coupling a norbornenyl group to end‐functionalized prepolymers. However, these MMs can also contain various residual impurities from previous synthetic steps, which can potentially poison the catalyst and hamper the ROMP reaction. Herein, we intentionally doped possible impurities into purified MMs to identify the most poisoning species. As a result, it was found that alkyne‐functionalized norbornene most significantly retarded the ROMP reaction due to a formation of Ru‐vinyl‐carbene intermediates having low catalytic reactivity, whereas the other reagents such as solvent, Cu‐catalyst, ligands, and azido‐terminated prepolymers were relatively inert. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 726–737