Chemical derivatization of peptides containing phosphorylated serine/threonine for efficient ionization and quantification in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We describe a useful method for the efficient ionization and relative quantification of peptides containing serine/threonine phosphorylation sites. This method is based on beta-elimination of the phosphate group from serine/threonine phosphorylation sites under alkaline conditions, followed by Michael addition reaction with N-(2-mercaptoethyl)-6-methylnicotinamide (MEMN). As a result of the derivatization reaction, the negatively charged phosphate group is substituted with the nicotinoyl moiety to improve the ionization efficiency of the derivatized peptide. The combination of d(3)-labeled MEMN (d(3)-MEMN) and MEMN (d(0)-MEMN) generates a 3 Da mass difference between d(3)-MEMN-labeled and d(0)-MEMN-labeled peptides, which is a useful signature for the identification of peptides containing serine/threonine phosphorylation sites in the matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrum. Moreover, the mass difference is useful for the quantitative analysis of serine/threonine phosphorylation in proteins. In this paper, we describe the synthesis of d(0)/d(3)-labeled MEMN and an application of our approach to model peptides and proteins.     

低浓度甲醛对多肽和蛋白化学修饰的质谱研究

采用基质辅助激光解析电离飞行时间质谱( MALDI-TOF MS)和纳升电喷雾四极杆飞行时间串联质谱( Nano-ESI -QTOF MS)技术,以标准肽段和流感病毒基质蛋白酶切肽段为模型,研究了甲醛对蛋白质和多肽主链的修饰作用。采用与实际病毒灭活过程一致的实验条件(4℃,0.025%(V/V)福尔马林(37%(w/w)甲醛溶液)处理72 h),进行甲醛与多肽的化学反应。结果表明,在实验条件下,甲醛能与标准肽段N端的氨基反应生成羟甲基加合物,再发生缩合反应生成亚胺,形成+12 Da的产物。此外,甲醛还能与标准肽段中的精氨酸、赖氨酸的侧链发生反应,生成+12 Da的反应产物。对流感病毒基质蛋白的酶切肽段与甲醛的反应的质谱分析结果显示,多数的肽段都生成了+24 Da的产物,质量的增加来源于肽段N端氨基(+12 Da)和C端精氨酸或赖氨酸的侧链(+12 Da)的贡献。此外,还观察到有一个漏切位点的肽段生成了+36 Da的产物。本研究结果表明,在实验条件下,低浓度甲醛主要与肽段和蛋白的N 端氨基,以及精氨酸和赖氨酸侧链发生反应。本研究为分析低浓度甲醛与蛋白质的反应产物提供了有效的质谱分析方法和解谱依据。     

Novel and cost‐effective 6‐plex isobaric tagging reagent,DiART, is effective for identification and relative quantification of complex protein mixtures using PQD fragmentation

Deuterium isobaric Amine Reactive Tag (DiART) reagents facilitate relative quantification during proteomic analysis in a functionally similar manner to commercially available isobaric tag for relative and absolute quantitation (iTRAQ) and tandem mass tag (TMT) reagents. In contrast to iTRAQ and TMT, DiART reagents incorporate deuterium isotopes which significantly reduce the number of required synthesis steps and hence have potential to significantly reduce reagent production cost. We examined the capability of DiART for performing quantitative proteomic experiments using a linear ion‐trap mass spectrometer with Pulsed Q Dissociation (PQD) fragmentation. Using a synthetic peptide tagged with DiART reagent, we observed a precise mass shift of 144.79 Da on the triply charged precursor ion, which shows complete derivatization of the N‐terminus and ε‐amino group of lysine. A DiART tagged tryptic digest of bovine serum albumin showed a sequence coverage of 57.99% which was very comparable to that showed by iTRAQ, 54.77%. Furthermore, a ten protein mixture tagged with DiART reagents and mixed in 1:1:1:1:1:1 exhibited < 15% error, whereas a linear trend (slope of 1.085) was observed when tagged proteins were mixed in the ratio 2:1:2:4:10:14 and plotted against theoretical ratios. Finally, when complex cell‐wall protein mixtures from the model fungus A. nidulans were tagged with DiART reagents and mixed in different ratios, they exhibited similar trends. We conclude that DiART reagents are capable of performing quantitative proteomic experiments using PQD on a linear ion trap mass spectrometer. Copyright © 2013 John Wiley & Sons, Ltd.     

An approach to quantitative proteome analysis by labeling tryptophan residues

This report describes a method for quantification and sequence identification of individual proteins in complex mixtures. The method is based on labeling with the chemical reagent 2-nitrobenzenesulfenyl chloride (NBSCl) in conjunction with tandem mass spectrometry. In this method, selective introduction of the 2-nitrobenzenesulfenyl (NBS) moiety onto tryptophan residues is achieved, and a 6 Da mass differential is generated using (13)C(6)-labeled NBSCl (NBSCl-(13)C(6)) and (12)C(6)-labeled NBSCl (NBSCl-(12)C(6)). The 6 Da mass differential between the NBS-(12)C(6)-labeled and the NBS-(13)C(6)-labeled peptides assigns a mass signature to all tryptophan-containing peptides in any pool of proteolytic digests for protein identification through peptide mass mapping. Using this strategy, we compared the protein expression in rat sera using a normal (control) rat (Crj:Wistar) and a hyperglycemic rat (GK/Crj). The stable isotope dilution techniques used in this method provide highly accurate relative quantification. The NBS approach offers a widely applicable means of analyzing protein mixtures derived from biological samples, and the method described here presents an effective and simplified approach to proteome analysis.     

A matrix-assisted laser desorption/ionization compatible reagent for tagging tryptophan residues

Chemical tagging of amino acids is an important tool in proteomics analysis, and has been used to introduce isotope labels and mass defect labels into proteolytic peptides by derivatization of cysteine or lysine residues. Here, we present a new reagent with chemical specificity for tryptophan residues. Previously, 2-nitrobenzenesulfenyl chloride has been used as a highly specific reagent for labeling tryptophan residues. We show that this tag undergoes UV dissociation during matrix assisted laser desorption/ionization (MALDI). The multiplicity of photofragments increases the difficulty of characterizing the derivatization products. To overcome this problem, we have synthesized a new reagent, 2-(trifluoromethyl)benzenesulfenyl chloride, which is shown to react quantitatively with tryptophan in peptides and proteins. Most significantly, it exhibits high photostability in MALDI-Fourier transform mass spectrometry analyses.     

Combining protein identification and quantification: C-terminal isotope-coded tagging using sulfanilic acid

Two methods of differential isotopic coding of carboxylic groups have been developed to date. The first approach uses d0- or d3-methanol to convert carboxyl groups into the corresponding methyl esters. The second relies on the incorporation of two 18O atoms into the C-terminal carboxylic group during tryptic digestion of proteins in H(2)18O. However, both methods have limitations such as chromatographic separation of 1H and 2H derivatives or overlap of isotopic distributions of light and heavy forms due to small mass shifts. Here we present a new tagging approach based on the specific incorporation of sulfanilic acid into carboxylic groups. The reagent was synthesized in a heavy form (13C phenyl ring), showing no chromatographic shift and an optimal isotopic separation with a 6 Da mass shift. Moreover, sulfanilic acid allows for simplified fragmentation in matrix-assisted laser desorption/ionization (MALDI) due the charge fixation of the sulfonate group at the C-terminus of the peptide. The derivatization is simple, specific and minimizes the number of sample treatment steps that can strongly alter the sample composition. The quantification is reproducible within an order of magnitude and can be analyzed either by electrospray ionization (ESI) or MALDI. Finally, the method is able to specifically identify the C-terminal peptide of a protein by using GluC as the proteolytic enzyme.     

Design and synthesis of a solid-phase fluorescent mass tag

In this study, we demonstrate the design of a new solid-phase fluorescent mass tag (FMT) that contains the following features: (1) the FMT is synthesized using Fmoc chemistry which is simple, rapid, and cost-effective; (2) lysine is used as a uniformly labeled amino acid (using stable isotopes) to allow 8 Da difference between "heavy" and "light" tags; (3) a fluorescent molecule is coupled to the isotope tag that allows a tagged peptide to be detected by online fluorescence; and (4) an iodoacetyl reactive group provides cysteine reactivity. Using MALDI-TOF MS and HPLC, we show that the FMT reagent can be used to label standard cysteine-containing peptides as well as cysteine-containing peptides from a BSA tryptic digest.     

Improved matrix-assisted laser desorption/ionization mass spectrometric analysis of tryptic hydrolysates of proteins following guanidination of lysine-containing peptides

Analysis of tryptic digests of proteins using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry commonly results in superior detection of arginine-containing peptides compared with lysine-containing counterparts. The effect is attributable in part to the greater stability of the arginine-containing peptide ions associated with the sequestration of the single ionizing proton on the arginine side-chain. Reaction of peptides with O-methylisourea resulted in conversion of lysine to homoarginine residues with consequent improved detection during MALDI-MS. Analysis of the underivatized tryptic digest of the yeast protein, enolase, revealed peptides representing 20% of the protein; the corresponding figure after derivatization was 46%.     

Protected Amine Labels: A Versatile Molecular Scaffold for Multiplexed Nominal Mass and Sub-Da Isotopologue Quantitative Proteomic Reagents

We assemble a versatile molecular scaffold from simple building blocks to create binary and multiplexed stable isotope reagents for quantitative mass spectrometry. Termed Protected Amine Labels (PAL), these reagents offer multiple analytical figures of merit including, (1) robust targeting of peptide N-termini and lysyl side chains, (2) optimal mass spectrometry ionization efficiency through regeneration of primary amines on labeled peptides, (3) an amino acid-based mass tag that incorporates heavy isotopes of carbon, nitrogen, and oxygen to ensure matched physicochemical and MS/MS fragmentation behavior among labeled peptides, and (4) a molecularly efficient architecture, in which the majority of hetero-atom centers can be used to synthesize a variety of nominal mass and sub-Da isotopologue stable isotope reagents. We demonstrate the performance of these reagents in well-established strategies whereby up to four channels of peptide isotopomers, each separated by 4 Da, are quantified in MS-level scans with accuracies comparable to current commercial reagents. In addition, we utilize the PAL scaffold to create isotopologue reagents in which labeled peptide analogs differ in mass based on the binding energy in carbon and nitrogen nuclei, thereby allowing quantification based on MS or MS/MS spectra. We demonstrate accurate quantification for reagents that support 6-plex labeling and propose extension of this scheme to 9-channels based on a similar PAL scaffold. Finally, we provide exemplar data that extend the application of isotopologe-based quantification reagents to medium resolution, quadrupole time-of-flight mass spectrometers.

Dansylation of tryptic peptides for increased sequence coverage in protein identification by matrix-assisted laser desorption/ionization time-of-flight mass spectrometric peptide mass fingerprinting

A database search using peptide mass fingerprints obtained by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry leads to protein identification with incomplete sequence coverage, because certain peptides are preferentially desorbed/ionized and some are not detected at all. We show that certain tryptic peptides mainly with C-terminal arginine not detected before derivatization become detectable upon dansylation. Others, mainly with C-terminal lysine, are suppressed. An increase in protein sequence coverage and protein identification score by combined data from underivatized and dansylated peptides in database search is demonstrated using human amnion proteins (human serum albumin precursor, calmodulin, collagen alpha 2(VI) chain precursor, galectin-3) separated by two-dimensional gel electrophoresis as well as femtomole amounts of BSA in solution.     

Synthesis of N,N-dimethyl-2,4-dinitro-5-fluorobenzylamine and its reactions with amino acids and peptides

A practical synthesis is described for N,N-dimethyl-2,4-dinitro-5-fluorobenzylamine (DMDNFB) and its -d₆ analog as an alternative Sanger's reagent (DNFB), for purposes of amino acid derivatization detectable by positive mode electrospray ionization mass spectrometry. DMDNFB is comparable to DNFB in its efficiency to derivatize amino acids and peptides. Various DMDNP (d₀/d₆) derivatives of (modified) lysine were synthesized to evaluate the potential use of isotope-edited LC-ESI-MS as a tool for structural definition of the posttranslational modification of protein-based lysines.     

CHASE, a charge-assisted sequencing algorithm for automated homology-based protein identifications with matrix-assisted laser desorption/ionization time-of-flight post-source decay fragmentation data

We describe CHASE, a novel algorithm for automated de novo sequencing based on the mass spectrometric (MS) fragmentation analysis of tryptic peptides. This algorithm is used for protein identification from sequence similarity criteria and consists of four steps: (1) derivatization of tryptic peptides at the N-terminus with a negatively charged reagent; (2) post-source decay (PSD) fragmentation analysis of peptides; (3) interpretation of the mass peaks with the CHASE algorithm and reconstruction of the amino acid sequence; (4) transfer of these data to software for protein identifications based on sequence homology (Basic Local Alignment Search Tool, BLAST). This procedure deduced the correct amino acid sequence of tryptic peptide samples and also was able to deduce the correct sequence from difficult mass patterns and identify the amino acid sequence. This allows complete automation of the process starting from MS fragmentation of complex peptide mixtures at low concentration (e.g. from silver-stained gel bands) to identification of the protein. We also show that if PSD data are collected in a single spectrum (instead of the segmented mode offered by conventional matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) instrumentation), the complete workflow from MS-PSD data acquisition to similarity-based identification can be completely automated. This strategy may be applied to proteomic studies for protein identification based on automated de novo sequencing instead of MS or tandem MS patterns. We describe the Charge Assisted Sequencing Engine (CHASE) algorithm, the working protocol, the performance of the algorithm on spectra from MALDI-TOFMS and the data comparison between a TOF and a TOF-TOF instrument.     

High-performance liquid chromatographic determination of peptides released by tryptic degradation from opioid peptide precursors in rat brain.

A high-performance liquid chromatographic method involving postcolumn fluorescence derivatization is described for the quantification of five fragment peptides (methionine-enkephalin-Thr-Ser-Glu-Lys, methionine-enkephalin-Lys, methionine-enkephalin-Arg, leucine-enkephalin-Lys and leucine-enkephalin-Arg) released by tryptic digestion from the opioid peptide precursors (proopiomeranocortin and proenkephalins A and B) in rat brain tissues. The tissue proteins containing the precursors are hydrolyzed with trypsin to the fragment peptides. The peptides are separated on an Asahipak ODP-50 column and on-line detected fluorometrically by using hydroxylamine, cobalt(II) and borate buffer reagents. The detection limits (S/N = 3) for the peptides are 0.7-2.8 pmol per 100 microliters injected. The distribution of the precursors in the brain tissues was also discussed on the basis of the determined values of the fragment peptides.     

Identification of an artifact in the mass spectrometry of proteins derivatized with iodoacetamide

Derivatization of cysteinyl residues is often used to prevent the formation of disulfide bonds during protein isolation and analysis. The most commonly used reagents are iodoacetic acid and iodoacetamide, which increase the molecular mass of the protein by 58 or 57 Da, respectively, for each derivatized cysteine. A possible side reaction is derivatization of methionine. In our analysis of derivatized human lens alphaA-crystallins, we found an apparent molecular mass 48 Da lower than the mass expected for alphaA-crystallin with the cysteines carboxyamidomethylated. Analysis of a tryptic digest of this protein showed that both cysteines and one methionine had been derivatized. Peaks indicating a molecular mass 48 Da less than expected for the protein with only cysteines derivatized were attributed to fragmentation of the derivatized methionine through collision-induced dissociation in the electrospray ionization source. An awareness of this artifact is important to investigators searching for proteins and their modified forms in complex mixtures.     

Derivatization procedures to facilitate de novo sequencing of lysine-terminated tryptic peptides using postsource decay matrix-assisted laser desorption/ionization mass spectrometry

Guanidination of the epsilon-amino group of lysine-terminated tryptic peptides can be accomplished selectively in one step with O-methylisourea hydrogen sulfate. This reaction converts lysine residues into more basic homoarginine residues. It also protects the epsilon-amino groups against unwanted reaction with sulfonation reagents, which can then be used to selectively modify the N-termini of tryptic peptides. The combined reactions convert lysine-terminated tryptic peptides into modified peptides that are suitable for de novo sequencing by postsource decay matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The guanidination reaction is very pH dependent. Product yields and reaction kinetics were studied in aqueous solution using either NaOH or diisopropylethylamine as the base. Methods are reported for derivatizing and sequencing lysine-terminated tryptic peptides at low pmole levels. The postsource decay (PSD) MALDI tandem mass spectra of a model peptide (VGGYGYGAK), the homoarginine analog and the sulfonated homoarginine analog are compared. These spectra show the influence that each chemical modification has on the peptide fragmentation pattern. Finally, we demonstrate that definitive protein identifications can be achieved by PSD MALDI sequencing of derivatized peptides obtained from solution digests of model proteins and from in-gel digests of 2D-gel separated proteins.     

Improved procedures for N-terminal sulfonation of peptides for matrix-assisted laser desorption/ionization post-source decay peptide sequencing

Post source decay (PSD) analysis of precursor ions generated from matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry is a powerful tool for amino acid sequencing and primary structure analysis of proteins. N-Terminal sulfonation has become an effective derivatization strategy in facilitating de novo peptide sequencing by the formation of predominate y-type ion series in MALDI PSD spectra. Recently, an effective and inexpensive N-terminal derivatization method has been reported using 4-sulfophenyl isothiocyanate (SPITC) as the derivatization reagent (J. Mass. Spectrom. 2003; 38: 373-377). In this paper, we report an improvement in the derivatization procedure with this reagent that involves replacing an organic co-reagent with other chemicals and eliminating the use of organic solvent. The method is demonstrated on a model peptide and on tryptic digests of two proteins. The results indicate that the improved sulfonation reaction can be implemented with high efficiency under aqueous conditions and that the sensitivity of mass detection can be increased considerably.     

A quantitative analysis of histone methylation and acetylation isoforms from their deuteroacetylated derivatives: application to a series of knockout mutants

The core histones, H2A, H2B, H3 and H4, undergo post‐translational modifications (PTMs) including lysine acetylation, methylation and ubiquitylation, arginine methylation and serine phosphorylation. Lysine residues may be mono‐, di‐ and trimethylated, the latter resulting in an addition of mass to the protein that differs from acetylation by only 0.03639 Da, but that can be distinguished either on high‐performance mass spectrometers with sufficient mass accuracy and mass resolution or via retention times. Here we describe the use of chemical derivatization to quantify methylated and acetylated histone isoforms by forming deuteroacetylated histone derivatives prior to tryptic digestion and bottom‐up liquid chromatography‐mass spectrometric analysis. The deuteroacetylation of unmodified or mono‐methylated lysine residues produces a chemically identical set of tryptic peptides when comparing the unmodified and modified versions of a protein, making it possible to directly quantify lysine acetylation. In this work, the deuteroacetylation technique is used to examine a single histone H3 peptide with methyl and acetyl modifications at different lysine residues and to quantify the relative abundance of each modification in different deacetylase and methylase knockout yeast strains. This application demonstrates the use of the deuteroacetylation technique to characterize modification ‘cross‐talk’ by correlating different PTMs on the same histone tail. Copyright © 2013 John Wiley & Sons, Ltd.     

Fast protein sequence determination with matrix-assisted laser desorption and ionization mass spectrometry

Measurement and identification of digested peptides by matrix-assisted laser desorption and ionization mass spectrometry (LDI-MS) is demonstrated. Synthetic human parathyroid hormone, pTH (1-34), with a molecular mass of 4117.8 Da was digested with carboxypeptidases Y and B and the sequence of 14 amino acids from the C-terminus of the peptide was determined by analyzing the molecular mass of the truncated peptides. Furthermore, a tryptic digestion of pTH (1-34) was carried out and a molecular mass map of pTH (1-34) was obtained. With the results of the proteolytic digestion a rapid confirmation of the amino-acid sequence of the protein was possible. It is shown that the results of the tryptic digestion can be used for the unambiguous identification of the amino acid residues Lys and Arg, which cannot be distinguished with a mass spectrometer because of their equal nominal masses. Several advantages of amino acid sequence determination by the combination of digestion and LDI-MS are obvious: high sensitivity in the low pmol range, fast digestion time due to high enzyme/substrate ratios, quantification is unnecessary because the amino acids are identified by their molecular mass differences, the low chemical expenditure for the digestions and the accuracy of the sequence determination. Measurements with LDI-MS are fast: sample preparation and the measurement take only a few min. The mass determination and amino acid sequence is completely unimpaired by amino acid contaminations or impurities in the sample. The sensitivity of the method is in the low pmol to fmol range and thus comparable to other analytical methods.     

Quantification of tryptic peptides in quadrupole ion trap using high-mass signals derived from isotope-coded N-acetyl dipeptide tags

Isotope-labeled N-acetyl dipeptides (Ac-Xxx-Ala) are coupled to the primary amines of tryptic peptides and then analyzed by tandem mass spectrometry. Amide bond cleavage between Xxx and Ala provides both low- and high-mass isotope-coded signals for quantification of peptides. Especially, facile cleavage at the modified lysine side chain yields very strong high-mass quantitation signals in a noise-free region. Tagging tryptic peptides with isobaric N-acetyl dipeptides is a viable strategy for accurate quantification of proteins, which can be used with most quadrupole ion trap mass spectrometers carrying the 1/3 mass cut-off problem.     

A systematic approach toward comparing electrospray ionization efficiencies of derivatized and non‐derivatized amino acids and biogenic amines

Ionization efficiency (IE) in mass spectrometry (MS) has been studied for many different compounds, and different IE scales have been constructed in order to quantitatively characterize IE. In the case of MS, derivatization has been used to increase the sensitivity of the method and to lower the limits of detection. However, the influence of derivatization on IE across different compounds and different derivatization reagents has not been thoroughly researched, so that practitioners do not have information on the IE‐enhancing abilities of different derivatization reagents. Moreover, measuring IE via direct infusion of compounds cannot be considered fully adequate. Since derivatized compounds are in complex mixtures, a chromatographic method is needed to separate these compounds to minimize potential matrix effects. In this work, an IE measurement system with a chromatographic column was developed for mainly amino acids and some biogenic amines. IE measurements with liquid chromatography electrospray ionization mass spectrometry (LC/ESI/MS) were carried out, and IE scales were constructed with a calibration curve for compounds with and without derivatization reagent diethyl ethoxymethylenemalonate. Additionally, eluent composition effects on ionization were investigated. Results showed that derivatization increases IE for most of the compounds (by average 0.9 and up to 2‐2.5 logIE units) and derivatized compounds have more similar logIE values than without derivatization. Mobile phase composition effects on ionization efficiencies were negligible. It was also noted that the use of chromatographic separation instead of flow injection mode slightly increases IE. In this work, for the first time, IE enhancement of derivatization reagents was quantified under real LC/ESI/MS conditions and obtained logIE values of derivatized compounds were linked with the existing scale.