pH-dependent behaviors of electroactive myoglobin loaded into layer-by-layer films assembled with alginate and hydroxyethyl cellulose ethoxylate

In the present work, strong polybase quaternized hydroxyethyl cellulose ethoxylate (HECE) and weak polyacid alginate (AA) were assembled into {HECE/AA} n layer-by-layer (LBL) films on electrodes by electrostatic interaction between them, and the films were then immersed in myoglobin (Mb) solution to load Mb into the films, designated as {HECE/AA}n-Mb. The {HECE/AA}n-Mb films showed a nearly reversible cyclic voltammetric (CV) peak pair at about -0.34 V vs SCE in pH 7.0 buffers for Mb heme Fe(III)/Fe(II) redox couple, and the surface concentration of electroactive Mb in the films (Gamma*) was affected significantly by the pH of Mb loading solution and testing solution. The amount of Mb loaded from pH 5.0 solution was much larger than that from pH 9.0 solution, which is mainly attributed to the higher degree of swelling, porosity, and permeability of {HECE/AA}n films at pH 5.0 than at pH 9.0. In addition, the electrostatic interaction between Mb and the AA component in the films might also play an important role in Mb loading. The pH of the testing solution where {HECE/AA}n-Mb films were tested by CV also influenced the Gamma* value, showing that the fraction of electroactive Mb among the total Mb loaded into the films increased remarkably as the pH of the testing solution decreased. This result is rationalized in terms of the pH-dependent film permeability toward counterions and the electron-hopping mechanism in electron transfer of redox proteins in the film phase. This model system may provide a general and effective approach to control the electroactivity of immobilized redox proteins in the multilayer assembly containing weak polyions by adjusting pH and may guide us to develop the new kind of controllable electrochemical biosensors based on the direct electrochemistry of enzymes.     

Salt-induced swelling and electrochemical property change of hyaluronic acid/myoglobin multilayer films

The ionic strength in supporting electrolyte solution had a significant influence on the electrochemical and electrocatalytic behaviors of myoglobin (Mb) in {HA/Mb}n films, which were assembled layer-by-layer on pyrolytic graphite (PG) electrodes with oppositely charged hyaluronic acid (HA) and Mb. The results of cyclic voltammetry (CV), quartz crystal microbalance (QCM), scanning electron microscopy (SEM), rotating disk voltammetry (RDV), and electrochemical impedance spectroscopy (EIS) showed that after incubation with testing solution at high concentration of salt (CKCl), the {HA/Mb}n films swelled and the film permeability was enhanced, suggesting that the external salt ions and accompanied water molecules in the exposure solution are incorporated into the films. Systematic investigation of the type and size effect of counterions in supporting electrolyte solution on the electrochemical responses for the {HA/Mb}n films and the positive shift of the formal potential (E degrees ') with CKCl suggest that it is cationic rather than anionic counterions that control the electrode process of {HA/Mb}n films at PG electrodes with electron hopping mechanism. The salt-induced swelling of {HA/Mb}n films facilitated the transportation of counterions, and then accelerated the electron transfer of Mb in the films with the underlying electrodes, making the film electrodes show better CV responses. The comparative study showed that only Mb layer-by-layer films assembled with "soft" and flexible polyions could demonstrate the salt-induced effect and that the {HA/Mb}n films showed better swelling capability than {PSS/Mb}n films (PSS = poly(styrenesulfonate)) due to the unique character of HA.     

Fabrication of electroactive layer-by-layer films of myoglobin with gold nanoparticles of different sizes

Alternate adsorption of oppositely charged myoglobin (Mb) and gold nanoparticles with different sizes were used to assemble {Au/Mb}n layer-by-layer films on solid surfaces by electrostatic interaction between them. The direct electrochemistry of Mb was realized in {Au/Mb}n films at pyrolytic graphite (PG) electrodes, showing a pair of well-defined, nearly reversible cyclic voltammetry (CV) peaks for the Mb heme FeIII/FeII redox couple. Quartz crystal microbalance (QCM), electrochemical impedance spectroscopy (EIS), and CV were used to monitor or confirm the growth of the films. Compared with other Mb layer-by-layer films with nonconductive nanoparticles or polyions, {Au/Mb}n films showed much improved properties, such as smaller electron-transfer resistance (Rct) measured by EIS with Fe(CN)3-/4- redox probe, higher maximum surface concentration of electroactive Mb (Gamma*max), and better electrocatalytic activity toward reduction of O2 and H2O2, mainly because of the good conductivity of Au nanoparticles. Because of the high biocompatibility of Au nanoparticles, adsorbed Mb in the films retained its near native structure and biocatalytic activity. The size effect of Au nanoparticles on the electrochemical and electrocatalytic activity of Mb in {Au/Mb}n films was investigated, demonstrating that the {Au/Mb}n films assembled with smaller-sized Au nanoparticles have smaller Rct, higher Gamma*max, and better biocatalytic reactivity than those with larger size.     

Interaction between myoglobin and hyaluronic acid in their layer-by-layer assembly: quartz crystal microbalance and cyclic voltammetry studies

Myoglobin (Mb), with different net surface charges at different pH in buffers and negatively charged hyaluronic acid (HA) at pH 5.0 in solutions were alternately adsorbed onto various solid surfaces and successfully assembled into {Mb/HA}(n) layer-by-layer films. The Mb in {Mb/HA}(n) films showed a quasi-reversible cyclic voltammetry (CV) response for its heme Fe(III)/Fe(II) redox couple. Quartz crystal microbalance (QCM) and CV were used to confirm the film growth and characterize the films. The interaction between Mb and HA and the influencing factors for Mb adsorption on HA surface, such as pH, Mb concentration, and ionic strength, were investigated in detail. The assembly driving force for {Mb/HA}(n) films, especially for the films assembled with like-charged Mb and HA, was found to be of electrostatic origin, while the secondary interaction such as hydrophobic interaction also plays an important role in some circumstances. Although the growth of {Mb(pH 7.0)/HA}(n) and {Mb(pH 9.0)/HA}(n) films was linear with the adsorption step, the exponential growth of {Mb(pH 5.0)/HA}(n) films was observed, especially when the films became thick. This exponential increase of mass and thickness with deposition step for {Mb(pH 5.0)/HA}(n) films was most probably attributed to the diffusion mechanism in which some HA molecules could diffuse in to and out of the whole films during the film assembly. Atomic force microscopy (AFM) results supported this speculation. UV-vis and IR spectroscopies of {Mb/HA}(n) films, combined with the comparative CV experiments of {Mb/HA}(n) and {catalase/HA}(n) films, suggest that Mb in the {Mb/HA}(n) multilayer films retains its near-native structure.     

Electrochemistry and Electrocatalysis of Myoglobin Loaded into Multilayer Films Assembled with Phytic Acid and Chitosan

Natural polymer polysaccharides chitosan (CS) was successfully assembled with phytic acid (PA) into {PA/CS}_n layer-by-layer films. Myoglobin (Mb) could be gradually “absorbed” or loaded into {PA/CS}_n films when the films were immersed into Mb solutions, forming {PA/CS}_n-Mb films. The {PA/CS}_n-Mb films demonstrated well-defined and quasi-reversible cyclic voltammetry (CV) responses for Mb Fe^III/Fe^II redox couple and were used to catalyze electrochemical reduction of oxygen and hydrogen peroxide. The interaction between Mb and {PA/CS}_n films was explored and discussed, which suggested that the electrostatic attraction might play a major role in loading Mb into the films. This new kind of film incorporated with redox proteins could be used to fabricate the new type of biosensors or bioreactors without using mediators.     

Assembly of electroactive layer-by-layer films of myoglobin and small-molecular phytic acid

In the present work, small-molecular phytic acid (PA) with its unique structure was successfully assembled with myoglobin (Mb) into {PA/Mb}_n layer-by-layer films on solid surfaces. Quartz crystal microbalance (QCM) and cyclic voltammetry (CV) were used to monitor or confirm the assembly process. IR and UV–vis spectroscopy indicate that the Mb in {PA/Mb}_n films retains its near native structure. The direct electrochemistry of Mb was realized in this new kind of films at pyrolytic graphite (PG) electrodes, and was used to electrocatalyze the reduction of various substrates. The interaction between PA and Mb under different pH conditions was also explored. Not only the oppositely charged PA and Mb at pH 5.0, but also the likely charged PA and Mb at pH 9.0, could be assembled into {PA/Mb}_n films. This work provides a novel avenue to fabricate protein multilayer films with small molecules and realizes the direct electrochemistry of redox proteins in the films.     

Influence of Ionic Strength on Electrochemical Responses of Myoglobin Loaded in Polysaccharide Layer‐by‐Layer Assembly Films

Two polysaccharides hydroxyethyl cellulose ethoxylate (HECE) and hyaluronic acid (HA) were assembled into {HECE/HA}_n layer‐by‐layer films on electrodes. The films were then immersed in myoglobin (Mb) solutions to load Mb into the films. The Mb‐loaded films showed a nearly reversible cyclic voltammetric (CV) peak pair at ?0.34 V vs. SCE in pH 7.0 buffers. The effect of ionic strength in Mb loading solutions and CV testing solutions on the CV response of the films was investigated. The direct electrochemistry of Mb loaded in the films could also be used to electrocatalyze the reduction of oxygen and H₂O₂ in solution.     

Long Distance Electron Transfer Across >100 nm Thick Au Nanoparticle/Polyion Films to a Surface Redox Protein

Glutathione‐decorated 5 nm gold nanoparticles (AuNPs) and oppositely charged poly(allylamine hydrochloride) (PAH) were assembled into {PAH/AuNP}_n films fabricated layer‐by‐layer (LbL) on pyrolytic graphite (PG) electrodes. These AuNP/polyion films utilized the AuNPs as electron hopping relays to achieve direct electron transfer between underlying electrodes and redox proteins on the outer film surface across unprecedented distances >100 nm for the first time. As film thickness increased, voltammetric peak currents for surface myoglobin (Mb) on these films decreased but the electron transfer rate was relatively constant, consistent with a AuNP‐mediated electron hopping mechanism.     

Assembly of electroactive layer-by-layer films of myoglobin and ionomer poly(ester sulfonic acid)

Layer-by-layer films were assembled on solid substrates by alternate adsorption of negatively charged ionomer poly(ester sulfonic acid) or Eastman AQ55 from its aqueous dispersion and positively charged myoglobin (Mb) from its solution at pH 4.5. The film assembly process was monitored by cyclic voltammetry (CV), UV-vis spectroscopy, and quartz crystal microbalance (QCM). [AQ/Mb](n) films grown on pyrolytic graphite (PG) electrodes showed a pair of well-defined and nearly reversible CV peaks at about -0.20 V vs Ag/AgCl in pH 5.5 buffers, characteristic of the Mb heme Fe(III)/Fe(II) redox couple. Although the amount of Mb adsorbed in each bilayer was essentially the same, the fraction of electroactive Mb decreased dramatically with an increase of bilayer number (n). Soret absorption bands of [AQ/Mb](n) films on glass slides suggest that Mb in the films retains its native state in the medium pH range. Trichloroacetic acid, oxygen, and hydrogen peroxide were electrochemically catalyzed by [AQ/Mb](6) films with significant lowering of reduction overpotential.     

Direct Electrochemistry of Hemoglobin in Layer-by-layer {PDDA/Hb}_n Films Assembled on Pyrolytic Graphite Electrodes

The principle of alternate adsorption can be used to design and control specific molecular architectures1. Protein-polyion layer-by-layer assembly opens a possibility of organizing proteins with specific molecular architectural plan1 and studying redox proteins with electrochemical methods2. Recently, we reported electrochemistry of layer-by-layer {PSS/Mb}n films grown on PG electrodes1. In this work, layer-by-layer {PDDA/Hb}n films were fabricated on PG electrodes. Electrochemistry and …     

Electroactive layer-by-layer films of heme protein-coated polystyrene latex beads with poly(styrene sulfonate)

In this work, a novel two-step construction strategy for protein layer-by-layer assembly films was proposed. In the first step, positively charged hemoglobin (Hb) or myoglobin (Mb) at pH 5.0 was adsorbed on the negatively charged surface of 500 nm diameter-sized polystyrene (PS) latex beads, forming core-shell structured PS-protein particles. In the next step, the PS-protein particles were further assembled layer by layer with oppositely charged poly(styrene sulfonate)(PSS) on various solid surfaces under suitable conditions. Cyclic voltammetry (CV), quartz crystal microbalance (QCM), and UV-vis spectroscopy were used to monitor the growth of {(PS-protein)/PSS}(n) films. The stable {(PS-protein)/PSS}(n) films modified on pyrolytic graphite (PG) electrodes demonstrated good electroactivity in protein-free buffer, which was originated from protein heme Fe(III)/Fe(II) redox couples, and the electroactivity extended to six (PS-protein)/PSS bilayers. UV-vis spectroscopy showed that Hb and Mb in the films retained their near-native structure in the medium pH range. {(PS-protein)/PSS}(n) films catalyzed electrochemical reduction of oxygen, hydrogen peroxide, trichloroacetic acid (TCA) and nitrite with a significant lowering of overpotential, and displayed better catalytic activity than corresponding cast PS-protein films.     

Conductive effect of gold nanoparticles encapsulated inside polyamidoamine (PAMAM) dendrimers on electrochemistry of myoglobin (Mb) in {PAMAM-Au/Mb}(n) layer-by-layer films

PAMAM-Au nanocomposites prepared by reduction of HAuCl4 with NaBH4 in the presence of the sixth-generation polyamidoamine (PAMAM) took a unique structure, in which the 2 nm-sized Au nanoparticles were encapsulated in the interior cavities of the PAMAM molecules. The PAMAM-Au nanocomposites as a new type of nanomaterial were assembled layer-by-layer with myoglobin (Mb) into {PAMAM-Au/Mb}n films on solid surfaces, which was confirmed by quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV). The direct electrochemistry of Mb in the films assembled on pyrolytic graphite (PG) electrodes was realized and used to catalyze the reduction of hydrogen peroxide. As compared to {PAMAM/Mb}n films containing no Au nanoparticles, the {PAMAM-Au/Mb}n films showed much better electrochemical and electrocatalytic properties, indicating the conductive effect of Au nanoparticles inside PAMAM on bridging electron transfer between Mb and PG electrodes.     

Electrochemical Investigation of Myoglobin in Layer‐by‐Layer Films Assembled with Sulfonated‐β‐Cyclodextrin

In this work, myoglobin (Mb) and sulfonated‐β‐cyclodextrin (S‐CD) were assembled into {S‐CD/Mb}_n layer‐by‐layer films on solid substrates. In pH 7.0 buffers, the {S‐CD/Mb}_n films assembled on electrodes showed a pair of well‐defined and nearly reversible CV peaks at about ?0.35 V vs. SCE. The stable CV response of {S‐CD/Mb}_n films could be used to electrocatalyze reduction of oxygen and hydrogen peroxide in solution. For comparison, another modified β‐cyclodextrin, carboxyethyl‐β‐cyclodextrin (C‐CD), was also assembled with Mb into {C‐CD/Mb}_n multilayer films. The driving forces of the assembly were explored and discussed.     

Protecting peroxidase activity of multilayer enzyme-polyion films using outer catalase layers

Films constructed layer-by-layer on electrodes with architecture {protein/hyaluronic acid (HA)}n containing myoglobin (Mb) or horseradish peroxidase (HRP) were protected against protein damage by H2O2 by using outer catalase layers. Peroxidase activity for substrate oxidation requires activation by H2O2, but {protein/HA}n films without outer catalase layers are damaged slowly and irreversibly by H2O2. The rate and extent of damage were decreased dramatically by adding outer catalase layers to decompose H2O2. Comparative studies suggest that protection results from catalase decomposing a fraction of the H2O2 as it enters the film, rather than by an in-film diffusion barrier. The outer catalase layers controlled the rate of H2O2 entry into inner regions of the film, and they biased the system to favor electrocatalytic peroxide reduction over enzyme damage. Catalase-protected {protein/HA}n films had an increased linear concentration range for H2O2 detection. This approach offers an effective way to protect biosensors from damage by H2O2.     

Assembly of layer-by-layer films of electroactive hemoglobin and surfactant didodecyldimethylammonium bromide

When a solid substrate with negative surface charges was placed in an aqueous didodecyldimethylammonium bromide (DDAB) vesicle dispersion, the cationic surfactant DDAB with two hydrocarbon chains could be assembled into the biomembrane-like tail-to-tail double-layer structure on the solid surface with the positively charged head groups toward outside, making the surface charge reverse from negative to positive. After the solid substrate with DDAB was immersed in a hemoglobin (Hb) solution at pH 9.0, the negatively charged Hb was adsorbed on the surface of DDAB layer by electrostatic attraction, forming a DDAB/Hb film. By repeating this adsorption cycle, the {DDAB/Hb}(n) layer-by-layer films were assembled on solid surfaces, which was confirmed by UV-vis spectroscopy, quartz crystal microbalance (QCM), and cyclic voltammetry (CV). The stable {DDAB/Hb}(n) films assembled on pyrolytic graphite (PG) electrodes showed two pairs of nearly reversible redox peaks at about -0.22 and -1.14 V vs SCE in pH 7.0 buffers, characteristic of the Hb heme Fe(III)/Fe(II) and Fe(II)/Fe(I) redox couples, respectively. The direct electrochemistry of Hb in the films could be used to electrocatalyze reduction of various substrates. UV-vis and IR spectroscopic results and comparison experiments with {DDAB/hemin}(n) films indicate that Hb in the {DDAB/Hb}(n) films essentially retains its native structure. Atomic force microscopy (AFM) was used to characterize the morphology of the films with different outermost layers.     

Direct Electrochemistry and Electrocatalysis of Myoglobin with Ionic Liquid through Multilayers Film on Carbon Ionic Liquid Electrode

Multilayers of myoglobin (Mb) with ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM]BF₄) was assembled on carbon ionic liquid electrode (CILE) based on the electrostatic attraction between the negatively charged Mb and the positively charged imidazolium ion of IL. The CILE was fabricated with 1‐ethyl‐3‐methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as the modifier, which exhibited imidazolium ion on the electrode surface. Then Mb molecules were assembled on the surface of CILE step‐by‐step to get a {IL/Mb}_n multilayer film modified electrode. UV‐Vis adsorption and FT‐IR spectra indicated that Mb remained its native structure in the IL matrix. In deaerated phosphate buffer solution (pH 7.0) a pair of well‐defined quasi‐reversible redox peaks appeared with the apparent formal potential (E^0′) as ‐0.212 V (vs. SCE), which was the characteristic of Mb heme Fe(III)/Fe(II) redox couples. The results indicated that the direct electron transfer of Mb was realized on the modified electrode. The {IL/Mb}_n/CILE displayed excellent electrocatalytic ability to the trichloroacetic acid reduction in the concentration range from 2.0 to 22.0 mmol/L with the detection limit of 0.6 mmol/L (3σ). The proposed method provides a new platform to fabricate the third generation biosensor based on the self‐assembly of redox protein with ILs.     

Redox properties of the ferricyanide ion on electrodes coated with layer-by-layer thin films composed of polysaccharide and poly(allylamine)

Polyelectrolyte multilayer thin films were prepared by an alternate deposition of poly(allylamine hydrochloride) (PAH) and anionic polysaccharides {carboxymethylcellulose (CMC) and alginic acid (AGA)} on the surface of a gold (Au) disk electrode, and the binding of ferricyanide [Fe(CN)(6)](3)(-) and hexaammine ruthenium ions [Ru(NH(3))(6)](3+) to the films was evaluated. Poly(acrylic acid) (PAA) was also employed as a reference polyanion bearing carboxylate side chains. A quartz-crystal microbalance study showed that PAH-CMC and PAH-AGA multilayer films grow exponentially as the number of depositions increases. The thicknesses of five bilayers of (PAH-CMC)(5) and (PAH-AGA)(5) films were estimated to be 150 +/- 20 and 90 +/- 15 nm, respectively, in the dry state. The PAH/polysaccharide multilayer film-coated Au electrodes exhibited a redox response to the [Fe(CN)(6)](3)(-) ion dissolved in solution, irrespective of the sign of the surface charge of the film, suggesting the high permeability of the films to the [Fe(CN)(6)](3)(-) ion. In contrast, the PAH-PAA film-coated Au electrodes exhibited a redox response only when the outermost surface of the film was covered with a positively charged PAH layer. However, the permeation of the [Ru(NH(3))(6)](3+) cation was severely suppressed for all of the multilayer films. It was possible to confine the [Fe(CN)(6)](3)(-) ion in the films by immersing the film-coated electrodes in a 1 mM [Fe(CN)(6)](3)(-) solution for 15 min. Thus, the [Fe(CN)(6)](3)(-)-confined electrodes exhibited a cyclic voltammetric response in the [Fe(CN)(6)](3)(-) ion-free buffer solution. The loading of the [Fe(CN)(6)](3)(-) ion in the films was higher when the surface charge of the film was positive and increased with increasing film thickness. It was also found that the [Fe(CN)(6)](3)(-) ion confined in the films serves as an electrocatalyst that oxidizes ascorbic acid in solution.     

Comparative Permeation Study of Different Types of Myoglobin Layer‐by‐Layer Films and the Effect of Film Permeability on Their Electrochemistry and Electrocatalysis

Three different types of myoglobin (Mb) layer‐by‐layer films were assembled respectively with TiO₂ sol‐gel by vapor‐surface deposition, TiO₂ nanoparticles, and poly(styrenesulfonate), designated as {SG‐TiO₂/Mb}_n, {NP‐TiO₂/Mb}_n, and {PSS/Mb}_n. The permeability of the films was studied and compared by rotating disk voltammetry (RDV) and electrochemical impedance spectroscopy (EIS) with different electroactive probes, showing a general permeability sequence of {SG‐TiO₂/Mb}_n>{NP‐TiO₂/Mb}_n>{PSS/Mb}_n. The electrochemical and electrocatalytic activity of Mb in these films were also investigated and compared by cyclic voltammetry (CV), RDV, and amperometry, indicating that among the three Mb films, {SG‐TiO₂/Mb}_n films demonstrated the highest maximum surface concentration of electroactive Mb and the best electrocatalytic performances toward reduction of H₂O₂. All these advantages could be attributed to the unique architecture and porous structure of {SG‐TiO₂/Mb}_n films, which could greatly facilitate the mass transport of small counterions and catalytic substrates within the films. The various influencing factors on the permeability, electrochemistry, and electrocatalysis of the Mb films were also investigated in detail.     

Synthesis, characterization, and immobilization of Prussian blue-modified Au nanoparticles: application to electrocatalytic reduction of H2O2

Au nanoparticles modified with electroactive Prussian blue (PB) were for the first time synthesized by a simple chemical method. Transmission electronic microscopy showed that the average size of the Prussian blue shell/Au core hybrid composite (PB@Au) was about 50 nm, and Fourier transform IR, UV-vis spectra, and cyclic voltammetry confirmed the existence of PB on the surface of Au nanoparticles. Using the LbL technique, multilayer thin films of PB@Au nanoparticles were prepared by the alternate adsorption of oppositely charged linear polyelectrolyte poly(allylamine hydrochloride) (PAH) onto ITO glass for the construction of a hydrogen peroxide sensor. The novel multilayer films were characterized by SEM, cyclic voltammetry, and UV-visible absorption spectroscopy. The {PAH/PB@Au}n multilayer-modified electrode showed a well-defined pair of redox peaks and dramatic catalytic activity toward the reduction of hydrogen peroxide.     

Layer-by-layer films of hemoglobin or myoglobin assembled with zeolite particles: electrochemistry and electrocatalysis

Positively charged hemoglobin (Hb) or myoglobin (Mb) at pH 5.0 in solutions and negatively charged zeolite particles in dispersions were alternately adsorbed onto solid surfaces forming [zeolite/protein](n) layer-by-layer films, which was confirmed by quartz crystal microbalance (QCM) and cyclic voltammetry (CV). The protein films assembled on pyrolytic graphite (PG) electrodes exhibited a pair of well-defined, nearly reversible CV peaks at about -0.35 V vs. SCE at pH 7.0, characteristic of the heme Fe(III)/Fe(II) redox couples. Hydrogen peroxide (H(2)O(2)) and nitrite (NO(2)(-)) in solution were catalytically reduced at [zeolite/protein](7) film modified electrodes, and could be quantitatively determined by CV and amperometry. The shape and position of infrared amide I and II bands of Hb or Mb in [zeolite/protein](7) films suggest that the proteins retain their near-native structure in the films. The penetration experiments of Fe(CN)(6)(3-) as the electroactive probe into these films and scanning electron microscopy (SEM) results indicate that the films possess a great amount of pores or channels. The porous structure of ]zeolite/protein](n) films is beneficial to counterion transport, which is crucial for protein electrochemistry in films controlled by the charge-hopping mechanism, and is also helpful for the diffusion of catalysis substrates into the films. The proteins with negatively charged net surface charges at pH 9.0 were also successfully assembled with like-charged zeolite particles into layer-by-layer films, although the adsorption amount was less than that assembled at pH 5.0. The possible reasons for this were discussed, and the driving forces were explored.