Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8材料的制备及在三效催化剂中的应用

采用共沉淀法制备了Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8(0≤x≤0.4)材料, 并对所制备的材料进行了X射线衍射(XRD)和X射线光电子能谱(XPS)的表征, 测定了材料的比表面积(BET法)和储氧量(OSC), 同时采用氢气程序升温还原(H2-TPR)和氨气程序升温脱附(NH3-TPD)研究了材料的还原性能和表面酸性. 研究结果表明, Ce/Ti摩尔比大于1∶2的材料能形成立方萤石结构的固溶体, Ce/Ti摩尔比为1时, 材料表面Ce4+/Ce3+摩尔比达到最大; 随着Ce/Ti摩尔比的增大, 材料的储氧能力先增大后减小, 而TPR还原峰温则是先减小后增大, 当Ce/Ti摩尔比为1时, 材料的储氧量达到最大, 为660 μmol/g; 还原峰峰温最低, 为616 ℃. 以制备的材料为载体制备了一系列Pt/Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8三效催化剂, 并对催化剂进行了活性评价. 活性测试结果表明, 以Ce/Ti比为1的载体材料制成的催化剂对C3H8, CO和NO的起燃温度分别为236, 147和228 ℃, 表现出了优异的温度特性.     

镧掺杂锶铁氧体-聚吡咯复合物的制备及磁性研究

用溶胶-凝胶法和溶液原位合成法分别制备镧掺杂锶铁氧体(Sr1－xLaxFe11.5Ni0.5O19, x＝0.0, 0.1, 0.2, 0.3, 0.4)粉末及其吡咯相对质量分数为60%和80%的聚吡咯-铁氧体复合物微粒PPY (Polypyrrole)/Sr0.8La0.2Fe11.5Ni0.5O19. 借助X射线衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、红外光谱(FTIR)和振动样品磁强计(VSM)等分析手段表征了铁氧体粉末和复合物微粒的结构、形貌和磁性能. 结果表明, 包覆的聚吡咯外层对复合物微粒的形貌和磁性有一定的影响. 在外加磁场作用下, 复合物的饱和磁化强度MS随吡咯含量的增加而减小, 当吡咯含量等于0%, 60%和80%时, 对应的MS分别为59.4, 18.7和10.3 emu/g.     

A molecular dynamics study of the atomic structure of (CaO)x(SiO2)1-x glasses

The local atomic environment of Ca in (CaO)x(SiO2)1-x glasses is of interest because of the role of Ca in soda-lime glass, the application of calcium silicate glasses as biomaterials, and the previous experimental measurement of the Ca-Ca correlation in CaSiO(3) glass. Molecular dynamics has been used to obtain models of (CaO)x(SiO2)1-x glasses with x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5, and with approximately 1000 atoms and size approximately 25 A. As expected, the models contain a tetrahedral silica network, the connectivity of which decreases as x increases. In the glass-forming region, i.e., x = 0.4 and 0.5, Ca has a mixture of 6- and 7-fold coordination. Bridging oxygen makes an important contribution to the coordination of Ca, with most bridging oxygens coordinated to 2 Si plus 1 Ca. The x = 0.5 model is in reasonable agreement with previous experimental studies, and does not substantiate the previous theory of cation ordering, which predicted Ca arranged in sheets. In the phase-separated region, i.e., x = 0.1 and 0.2, there is marked clustering of Ca.     

Ce0.5+xZr0.4-xLa0.1O2-Al2O3催化剂催化燃烧柴油车碳烟

采用共沉淀法制备了系列Ce_0.5+xZr_0.4-xLa_0.1O₂-Al₂O₃催化剂, 其中0≤x≤0.4且Ce_0.5+xZr_0.4-xLa_0.1O₂与Al₂O₃的质量比为1:1. 考察了该系列催化剂对柴油车排放碳烟的催化燃烧性能, 并用低温N2吸附-脱附、X射线衍射(XRD)、X射线光电子能谱(XPS)、氢气程序升温还原(H₂-TPR)和氧气程序升温脱附(O₂-TPD)等手段对催化剂进行了表征. 研究结果表明该系列催化剂均形成了具有立方萤石结构的固溶体. 当x=0.2时, Ce³⁺离子在催化剂表面有一定的富集, 此时催化剂具有最大的β氧脱附峰和最好的表面还原性能, 同时具有良好的催化碳烟氧化活性, 碳烟在该催化剂的起燃温度为360 °C, 具有较好的应用前景.     

纳米La0.8A’0.2Mn1-xCuxO3（A’=Ce and/or Sr）的制备、表征及其高效催化NO+CO的性能研究

采用柠檬酸-溶胶凝胶法制得钙钛矿型复合氧化物La0.8Ce0.2Mn1-xCuxO3(x=0.2,0.3,0.4),La0.8Sr0.2Mn0.6Cu0.4O3,La0.8Ce0.1Sr0.1Mn0.6 Cu0.4 O3,并采用X射线衍射(XRD)、扫描电镜(SEM)、比表面积(BET)、X射线光电子能谱(XPS)对其进行表征,测试了复合氧化物对CO+NO的催化活性。结果表明:La0.8Ce0.1Sr0.1Mn0.6Cu0.4O3催化活性最好,150℃时CO转化率91.8%,300℃时NO转化率100%;对于La0.8Ce0.2Mn1-xCuxO3(x=0.2,0.3,0.4),比表面积和颗粒的大小及分散度是影响催化活性的主要因素;对于La0.8Ce0.2Mn0.6Cu0.4O3,La0.8 Sr0.2 Mn0.6 Cu0.4 O3,La0.8 Ce0.1 Sr0.1 Mn0.6 Cu0.4 O3,催化剂的组成是影响催化活性的关键因素。     

Mn3O4/金属有机骨架材料活化过一硫酸盐降解水中难降解有机污染物罗丹明B

锰氧化物是一类环境友好型材料,可以有效活化过一硫酸盐(PMS)降解水中难降解有机污染物.但是锰氧化物在单独使用时容易出现严重的团聚现象,进而降低其对PMS的催化活性,不利于水中污染物的降解.因此,人们通常将锰氧化物负载于多孔的载体材料上.金属有机骨架材料(MOFs)因具有巨大的比表面积和温和的制备条件而广受关注.本文采用温和的溶剂热法首次成功制备了Mn3O4与MOF的复合材料Mn3O4/ZIF-8,并通过X射线衍射、扫描电镜、透射电镜、X射线光电子能谱和红外光谱等手段对其进行了表征,探究了Mn3O4/ZIF-8的形成机理.考察了Mn3O4负载量对Mn3O4/ZIF-8催化性能的影响,以及Mn3O4/ZIF-8投加量、PMS投加量、初始罗丹明B(RhB)浓度和反应温度对RhB去除效果的影响,同时探究了Mn3O4/ZIF-8的重复使用性能,分析了RhB的降解途径、去除机理以及最终的降解副产物.结果表明,边长为50?150 nm的片状Mn3O4均匀分散在粒径为250 nm的六边形ZIF-8的外表面;当Mn3O4负载量为0.5时,所制备的复合材料0.5-Mn/ZIF-120活化PMS对RhB的降解效果最好,反应60 min时RhB降解率可达到99.4%,且Mn的浸出量可以忽略不计.在该体系中,RhB的降解过程符合一级动力学反应方程,其降解速率常数随催化剂和PMS投加量的增加、反应温度的提高和初始RhB浓度的减小而增大.在0.5-Mn/ZIF-120催化剂投加量为0.4 g/L、PMS投加量为0.3 g/L、初始RhB浓度为10 mg/L、初始溶液pH为5.18及室温(23oC)条件下,水中RhB的降解率在40 min时即可达到98%.淬灭实验表明,该体系中HO?起主导作用,而其主要来源于活化PMS所产生的SO4–?.此外,通过简单的二次水冲洗方式对0.5-Mn/ZIF-120催化剂进行回收使用,在连续5次循环使用后仍然可见较高的催化活性和稳定性,RhB的去除率保持在96%以上,且Mn的浸出百分率始终低于5%.     

聚苯胺/聚丙烯酰胺/镍锌铜铁氧体复合物的制备及电磁性能

采用溶液聚合法制备了聚苯胺/聚丙烯酰胺/镍锌铜铁氧体(PANI/PAM/Zn0.4Ni0.5Cu0.1Fe2O4)三元复合物. 利用X射线衍射仪、红外光谱仪、扫描电子显微镜和振动样品磁强计分别表征了样品的结构、形貌和磁性能, 用阻抗/材料分析仪测定了复合物在1 MHz～1 GHz的频率范围内的磁损耗和介电损耗, 并研究了聚苯胺和引发剂的相对含量对复合物的磁损耗和介电损耗的影响. 结果表明复合物中磁性粒子和聚合物之间具有一定的相互作用, 复合物在1 MHz～1 GHz的频率范围内具有较大电磁损耗能力.     

用XPS研究新西兰高硫煤热解过程中氮、硫官能团的转变规律

选择一种高硫新西兰煤(NXL)作为研究对象,高纯Ar气氛中,以5℃/min的升温速率在管式炉中热解,热解终温为300~1 000℃。用XPS研究煤及不同温度下半焦中氮、硫的赋存形态。将N 1s谱图用Lorentzian-Gaussian拟合分为四个峰:N-6(398.8±0.4)eV、N-5(400.2±0.3)eV、N-Q(401.4±0.3)eV和N-X(402.9±0.5)eV;S 2p谱图分为六个峰:硫铁矿(162.5±0.3)eV、硫化物(163.3±0. 4)eV、噻吩(164.1±0.2)eV、亚砜(166.0±0.5)eV、砜(168.0±0.5)eV和硫酸盐硫(169.5±0.5)eV。结果表明,煤中氮元素的主要存在形式是吡啶、吡咯、质子化吡啶和氮氧化物;低于600℃,半焦中的氮元素主要以吡啶和吡咯形式存在;随温度的升高,吡咯向吡啶转化;当温度超过900℃,氮氧化物这一形态消失。该煤中的硫以有机硫为主,其中,噻吩硫占50%以上;随着热解温度的升高,煤中的硫铁矿硫逐步转化为无机硫化物,600℃时分解完全。     

Styrene epoxidation with hydrogen peroxide over calcium oxide catalysts prepared from various precursors

A series of CaO samples were prepared by calcination of commercially available and synthesis of calcium salt precursors such as calcium acetate,carbonate,hydroxide and oxalate etc.CaO samples were found to be effective for the epoxidation of styrene using hydrogen peroxide as an oxidant in the presence of acetonitrile.To determine the influence of the physicochemical properties and surface basicity on the catalytic activity,the prepared CaO samples were characterized using thermogravimetry(TG),X-ray diffraction(XRD),scanning electron microscopy(SEM),N2-adsorption and temperature-programmed desorption of CO2(CO2-TPD).The results indicate that the amounts of very strong basic sites and high basicity strength on CaO sample are key factors for its excellent catalytic performance.In contrast,the surface area,porosity and the surface structure of CaO sample have a relatively minor effect on the catalytic activity.CaO sample,obtained by the decomposition of Ca(OH)2,prepared by precipitating calcium nitrate with sodium hydroxide in ethylene glycol solution,exhibits the highest amount of very strong basic sites and stronger strength of basic sites,and therefore it catalyses the epoxidation of styrene with the highest rate among the tested CaO samples.Under the selected reaction conditions,the selectivity of 97.5% to styrene oxide at a conversion in excess of 99% could be obtained.     

Effect of Cation Proportion on the Structural and Magnetic Properties of Ni-Zn Ferrites Nano-Size Particles Prepared By Co-Precipitation Technique

Ferrites having general formula Ni1-xZnxFe2O4 with x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, and 0.7 were prepared by wet chemical co-precipitation method. The structural and magnetic properties were studied by means of X-ray diffraction, magnetization, and AC susceptibility measurements. The X-ray analysis confirmed the single-phase formation of the samples. The lattice parameter obtained from XRD data was found to increase with Zn content x. The cation distribution was studied by X-ray intensity ratio calculations. Magnetization results exhibit collinear ferrimagnetic structure for x<0.4, and which changes to non-collinear for x>0.4. Curie temperature TC obtained from AC susceptibility data decreases with increasing x.     

制备方法对 LaMn0.8Mg0.2O3 钙钛矿型氧化物催化甲烷燃烧反应性能的影响

 分别采用甘氨酸硝酸盐法、溶胶凝胶法、共沉淀法、燃烧法以及水热法制备了钙钛矿型 LaMn0.8Mg0.2O3 复合氧化物, 用 X 射线衍射、红外光谱、H2 程序升温还原和低温 N2 吸附对其进行了表征, 并考察了其对甲烷燃烧的催化活性. 结果表明, 制备方法和焙烧温度对 LaMn0.8Mg0.2O3 钙钛矿型催化剂的结构、晶粒大小和不同类型的氧物种影响很大. 以甘氨酸硝酸盐法制备的钙钛矿型催化剂经 700 °C 焙烧后表现出最高的催化活性, T50 (甲烷转化率达到 50% 时的温度) 仅为 440 °C. 这归结于它较小的晶粒尺寸 (12.4 nm) 和较大的比表面积 (18.6 m2/g), 以及催化剂表面富集的 Mn4+, 从而使表面氧物种更容易移动和/或更具有反应活性.     

光催化剂Bi1-xGdxVO4的制备和表征及其光催化分解水

通过高温固相法合成了不同组分的光催化剂Bi1-xGdxVO4(x=0, 0.1, 0.2, 0.3, 0.5, 0.7, 0.9, 1.0), 并用X射线衍射(XRD)、紫外-可见漫反射光谱(DRS)、比表面积分析(BET)、扫描电子显微镜(SEM)对催化剂Bi1-xGdxVO4进行了表征和分析. XRD结果表明, 在Bi1-xGdxVO4中存在两种结构, 当0.3≤x≤1.0时, Bi1-xGdxVO4为四方晶系硅酸锆型结构; 当x=0时, 为单斜晶系白钨矿结构BiVO4; 当0相似文献   

Dry reforming reaction over nickel catalysts supported on nanocrystalline calcium aluminates with different CaO/Al2O3 ratios

Nanocrystalline calcium aluminates with different CaO/Al2O3 ratios were prepared by a facile co-precipitation method using Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEG-PPG-PEG, MW: 5800) as a surfactant. They were employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by X-ray diffraction (XRD), N2 adsorption (BET), temperature-programmed reduction and oxidation (TPR-TPO), and scanning electron microscopy (SEM) techniques. Catalysts showed a relatively high catalytic activity and stability. TPR analysis revealed that the catalysts with higher CaO content are more difficult to be reduced. TPO analysis showed that the 5 wt%Ni/CA and 5 wt%Ni/C12A7 catalysts with higher CaO amount were effective against coke deposition.     

Optimization of process conditions for biodiesel production over CaO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript> catalyst using response surface methodology

CaO–Al₂O₃/ZrO₂ mixed oxide catalyst was prepared using free-solvent method. The catalyst was characterized using X-ray diffraction, BET surface area, acidity index (obtained by titration method), and scanning electron microscopy (SEM). With calcium aluminate and calcium zirconate been successfully formed, the mix exhibited small crystal size, high acidity, and large surface area, pore size, and pore volume, making it a catalyst of choice for biodiesel production. The activity of catalyst was evaluated in the course of esterification of oleic acid as well as transesterification of waste cooking oil (WCO) into biodiesel. Based on a four-variable central composite design (CCD), response surface methodology (RSM) was used to optimize effective variables on oleic acid conversion. The optimum yield of 94.68% was obtained at the following set of optimum conditions: reaction temperature of 120 °C, methanol/oleic acid molar ratio of 15.64, catalyst concentration of 2.94 wt%, and reaction time of 4 h; the result was in excellent agreement with the predicted values. Furthermore, under the optimum conditions, the catalyst succeeded to convert 93.48% of WCO into biodiesel.     

Toluene and naphthalene sorption by iron oxide/clay composites

Commercial bentonite (BFN) and organoclay (WS35), as well as iron oxide/clay composite (Mag_BFN) and iron/oxide organoclay composite (Mag_S35) were prepared for toluene and naphthalene sorption. Mag_BFN and Mag_S35 were obtained, respectively, by the precipitation of iron oxide hydrates onto sodium BFN and S35 clay particles. The materials were characterized by powder X-ray diffraction (XRD), X-ray Fluorescence (XRF), and TG and DTA. From XRF results and TG data on calcined mass basis, a quantitative method was developed to estimate the iron compound contents of the composites, as well as the organic matter content present in WS35 and Mag_S35.     

高功率镍氢电池La1-xMgx(NiCoAl)3.6金属氢化物电极的电化学性能研究

MH-Ni电池具有电化学比能量高、耐过充/放电性能好、无记忆效应和环境友好等优点而得到广泛应用.金属氢化物电极是MH-Ni电池的核心材料,其研究工作主要集中在稀土AB₅系、钛系、锆系和镁基等合金作为MH-Ni电池金属氢化物电极方面.但这些体系合金的电化学容量低.     

Cu(II) removal enhancement from aqueous solutions using ion-imprinted membrane technique

In this study, Cu(II)-ion-imprinted membrane adsorbents were prepared via cross-linking of blended chitosan/poly(vinyl alcohol) using glutaraldehyde as cross-linker and copper ions as template. The ability of IIMs to adsorb copper ions from aqueous solutions was assessed using a batch of experiments under different conditions by changing cross-linking density (0.05 mass %, 0.1 mass %, and 0.2 mass %), template content (0.2 mass %, 0.5 mass %, and 0.9 mass %), initial analyte concentration (50 mg L^?1, 100 mg L^?1, and 150 mg L^?1), and adsorbent concentration (0.5 g L^?1, 1.0 g L^?1, and 2.0 g L^?1). The Taguchi method was used to plan a minimum number of experiments. The following optimal levels were thus determined for the four factors: cross-linking density: 0.1 mass %; template content: 0.5 mass %; initial analyte concentration: 150 mg L^?1; and adsorbent concentration: 0.3 g L^?1.     

层状钙钛矿型Sm2-2xSr1+2x-2yCa2yMn2O7(x=0.2，0.3，0.4，0.5；y=0，0.2，0.3)的溶胶凝胶合成及电性能研究

Layered perovskite manganites with a nominal chemsitry of Sm_2-2xSr_1+2x-2_yCa_2yMn₂O₇(x=0.2, 0.3, 0.4, 0.5; y=0, 0.2, 0.3) were prepared using sol-gel method. The crystal structures of these compounds were studied by X-ray diffraction (XRD) and FTIR absorption spectra. The absorption peaks become weaker and move a little to higher frequency with increasing of Sm/Sr concentration. As the Sm doping increases to x=0.2 and x=0.3, the absorption peaks show a cubic structure character, reflecting that the samples suffer from a transition from tetragonal structure to cubic structure. This coincides with the X-ray diffraction results. The high temperature electrical properties were studied by conventional four-probe method. Although all samples exhibit the semiconductive behavior, lnρ-1 000/T curves are not linear and they obey the small polaron hopping mechanism. Moreover, the resistivity decreases with x reducing. This is due to that Sm doping increases the Jahn-Teller ion Mn³⁺/Mn⁴⁺ ratio, and decreases the e_g bandwidth.     

CdS/石墨烯复合材料的制备及其可见光催化分解水产氢性能

以氧化石墨烯和CdS为原料, 在乙醇水溶液中采用CdS光催化还原法制备了CdS/石墨烯复合光催化材料, 并用透射电子显微镜(TEM)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)和瞬态光电流等技术对复合材料的结构和光电性能进行了表征. 可见光照射下(λ≥420 nm), 研究了该复合材料光催化分解水产氢的性能. 结果表明, 可见光照射下CdS的光生电子可有效地还原氧化石墨烯, 得到CdS与石墨烯之间具有强相互作用力的CdS/石墨烯复合材料. 与CdS相比, 复合材料中石墨烯作为良好的电子受体和传递介质, 可明显加快CdS光生电子的迁移速率, 提高光生载流子的分离效率, 从而增强复合材料的光电性能和光催化分解水产氢的活性.     

Charge-induced unilamellar vesicle formation and phase separation in solutions of Di-n-decylmethylamine oxide

A double-tail amine oxide surfactant, di-n-decylmethylamine oxide (2C10MAO), was prepared, and the effects of protonation on aggregate structure were examined by small-angle neutron scattering (SANS), cryo-transmission electron microscopy (cryo-TEM), turbidity, electric conductivity, and solubilization of an oil-soluble dye at various degrees of neutralization, X, defined as the mole ratio of HCl/2C10MAO. The surfactant makes an L(2) phase in the nonprotonated state (X = 0) in water. The L(2) phase is in equilibrium with an aqueous L(1) phase. On protonation, unilamellar vesicles (ULVs) are formed over a wide range of compositions (0.05 < X< 0.4-0.5 at C = 10 mM) as observed by cryo-TEM. At X = 0.2, the ULV is stable over a wide concentration range (3 mM < or = C < 0.1 M), but an L(alpha) phase replaces the vesicle phase at C > 0.1 M. SANS results show that the mean radius of the ULV is about 25 nm and the bilayer thickness is about 2 nm, consistent with the extended configuration of the alkyl chains of the surfactant. An important contribution to the enhanced stability of the bilayer structures over the L(2) phase is suggested to be the translational entropy of the counterions. The enhanced stability of the bilayers diminishes as the counterion concentration increases either by an increase of X or by the addition of a salt. When the counterion concentration exceeds a critical value, the ULV solutions transform into the L(2) phase (or L(2)/L(1) two-phase system at low surfactant concentrations). The critical composition X is about 0.4-0.5 in water, but it is below 0.4 in D(2)O. The critical NaCl concentration is below 5 mM at X = 0.2. The stability of ULVs against multilamellar vesicles is ascribed partly to undulation forces and partly to the adjustable nature of the spontaneous curvature of amine oxide monolayers. The characteristics of the ULV of the surfactant remain the same within a temperature range 25-50 degrees C at X = 0.2. An iridescent lamellar phase and possibly an L(3) phase were observed in a very narrow X range (0 < X < 0.02) prior to the vesicle phase.