Raman Spectroscopic Study on Alkyl Chain Conformation in 1‐Butyl‐3‐methylimidazolium Ionic Liquids and their Aqueous Mixtures

Ionic liquids of 1‐butyl‐3‐methylimidazolium ([BMIM]) cation with different anions (Cl^?, Br^?, I^?, and BF₄^?), and their aqueous mixtures were investigated by using Raman spectroscopy and dispersion‐included density functional theory (DFT). The characteristic Raman bands at 600 and 624 cm^?1 for two isomers of the butyl chain in the imidazolium cation showed significant changes in intensity for different anions as well as in aqueous solutions. The area ratio of these two bands followed the order I^?>Br^?>Cl^?>BF₄^? (in terms of the anion X in [BMIM]X), indicating that the butyl chain of [BMIM]I tends to adopt the trans conformation. The butyl chain was found to adopt the gauche conformation upon dilution, irrespective of the anion type. The Raman bands in the butyl C?H stretch region for [BMIM]X (X=Cl^?, Br^?, and I^?) blueshifted significantly with the increase in the water concentration, whereas that for [BMIM]BF₄ changed very little upon dilution. The blueshift in the C?H stretch region upon dilution also followed the order: [BMIM]I>[BMIM]Br>[BMIM]Cl>[BMIM]BF₄, the same order as the above trans conformation preference of the butyl chain in pure imidazolium ionic liquids, which suggested that the cation‐anion interaction plays a role in determining the conformation of the chain.     

Synthesis and characterization of hybrid materials based on 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and Dawson-type tungstophosphate K7[H4PW18O62]·18H2O and K6[P2W18O62]·13H2O

In this study, we synthesized hybrid materials using well-Dawson polyoxometalates (POMs), K₇[H₄PW₁₈O₆₂]·18H₂O or K₆[P₂W₁₈O₆₂]·13H₂O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]). K, W, P and CHN elemental analysis showed that one mole of [H₄PW₁₈O₆₂]⁷⁻ reacts with 6 moles of BMIM⁺ and one mole of [P₂W₁₈O₆₂]⁶⁻ reacts with 4 moles of BMIM⁺ to form, respectively, K[BMIM]₆H₄PW₁₈O₆₂ and K₂[BMIM]₄P₂W₁₈O₆₂. X-ray diffraction illustrated amorphous structure of the hybrid materials. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid materials compared to the parents Dawson POMs. Cyclic voltammetry showed that the reduction peak potentials of the Dawson anion in the hybrid materials shift towards negative values and the shift is more pronounced for K[BMIM]₆H₄PW₁₈O₆₂ compared to K₂[BMIM]₄P₂W₁₈O₆₂. This was attributed to a decrease in the acidity of the Dawson POM anion in the hybrid material.     

Degradation of chlorophenols in aqueous solution by γ-radiation

Degradation of chlorophenols (CPs) in aqueous solutions by γ-radiation was studied. The effect of absorbed dose on degradation, dechlorination and mineralization of CPs were investigated. The results indicated that the degradation of CPs, Cl⁻ release and mineralization increased with increase in absorbed dose. When the initial concentration was 100 mg L⁻¹ and the dosage was 6 kGy, the removal efficiencies of CPs were 44.54% for 2-CP, 91.46% for 3-CP, 82.72% for 4-CP and 93.25% for 2,4-DCP, respectively. The combination of irradiation and H₂O₂ leads to a synergistic effect, which remarkably increased the degradation efficiency of CPs and TOC removal. The kinetics of CPs during irradiation are also mentioned.     

Effect of dose rate on degradation of 2,6-dichlorophenol by electron beam irradiation

The effects of different dose rates on the degradation of 2,6-dichlorophenol (2,6-DCP) in aqueous solution were investigated at about 2?×?10⁴ Gy absorbed dose, using a 10 MeV electron beam accelerator. It was found that the removal efficiency decreased with increasing dose rate at all initial concentrations of 0.5, 1 and 2 g L^?1, and the effect was significantly diminished by addition of P25 TiO₂ nanoparticles. Alkaline medium were unfavorable for degradation of 2,6-DCP. Hydrogen peroxide (H₂O₂) could promote the removal efficiency at a lower dose rate rather than at a higher one.

     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

离子液体[BMIM]Br与[BMIM][BF4]配比浓度对Br-离子电荷转移的调节

利用X射线吸收精细结构光谱(XAFS)及紫外吸收光谱两种方法, 分析了离子液体1-丁基-3-甲基咪唑溴盐([BMIM]Br)中逐渐掺入1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])时, Br^-阴离子与咪唑阳离子之间氢键作用及电荷偏移量的改变. 随着[BMIM][BF₄]加入量增多, Br 元素XAFS近边(XANES)显示吸收峰降低, 吸收边位置向低能端位移0.9 eV; 扩展边(EXAFS)算出径向结构显示Br 与近邻原子间平均配位数降低、平均键长增长; 紫外光谱也有明显蓝移减色效应. 这些结果都表明Br₄^-的掺入改变了Br^-与阳离子间的电荷偏移量, 负电荷更多地转移到Br^-上, 量化计算的数据同样支持该结论.     

Influence of the alkyl group on thermophysical properties of carboxylic acids in 1-butyl-3-methylimidazolium thiocyanate ionic liquid at various temperatures

In the present study, influence of the alkyl group and temperature on the interactions between the carboxylic acid and ionic liquid (IL) mixtures were discussed in term of density and sound velocity measurements. The IL used in this study was 1-butyl-3-methylimidazolium thiocyanate ([BMIM]⁺[SCN]⁻). The density (ρ), and sound velocity (u), of the IL, acetic acid, propionic acid, and their corresponding binary systems {[BMIM]⁺[SCN]⁻ (x₁) + acetic or propionic acid (x₂)} have been measured at T = (293.15, 298.15, 303.15, 308.15 and 313.15) K and at p = 0.1 MPa. The excess molar volumes, $V_{\text{m}}^{\text{E}}$, isentropic compressibility, κ_s, and deviation in isentropic compressibility, Δκ_s, were calculated using experimental density and sound velocity data, respectively. The Redlich–Kister polynomial equation was used to fit the excess/deviation properties. These results are useful for describing the intermolecular interactions that exist between the IL and carboxylic acid mixtures.     

Organotin–Oxido Cluster‐Based Multiferrocenyl Complexes Obtained by Hydrolysis of Ferrocenyl‐Functionalized Organotin Chlorides

Three organotin–oxido clusters were formed by hydrolysis of ferrocenyl‐functionalized organotin chloride precursors in the presence of NaEPh (E=S, Se). [R^FcSnCl₃?HCl] ( C ; R^Fc = CMe₂CH₂C(Me)?N?N?C(Me)Fc) and [SnCl₆]^2? formed {(R^FcSnCl₂)₃[Sn(OH)₆]}[SnCl₃] ( 3 a ) and {(R^FcSnCl₂)₃[Sn(OH)₆]}[PhSeO₃] ( 3 b ), bearing an unprecedented [Sn₄O₆] unit, in a one‐pot synthesis or stepwise through [(R^FcSnCl₂)₂Se] ( 1 ) plus [(R^FcSnCl₂)SePh] ( 2 ). A one‐pot reaction starting out from FcSnCl₃ gave [(FcSn)₉(OH)₆O₈Cl₅] ( 4 ), which represents the largest Fc‐decorated Sn/O cluster reported to date.     

Constant current anodic stripping chronopotentiometric determination of uranium in uranium mineral ores via accumulation of K<Subscript>2</Subscript>UO<Subscript>2</Subscript>[Fe(CN)<Subscript>6</Subscript>] on the palladium plated aluminum electrode

In the present work the uranyl hexacyanoferrate (K₂UO₂[Fe(CN)₆]) is deposited on the palladized aluminum (Pd-Al) electrode from a \textUO₂^{2 +} + \textFe( \textCN )₆ ^{- 3} {\text{UO}}_{2}^{2 + } + {\text{Fe}}\left( {\text{CN}} \right)_{6}^{ - 3} solution. Then the anodic stripping chronopotentiometry (ASCP) was used to strip the K₂UO₂[Fe(CN)₆] from the Pd-Al surface. The operational conditions including: pH, K₃Fe(CN)₆ concentration, deposition potential, deposition time and stripping current were optimized. The ASCP calibration graph was linear in concentration range 10–460 μM. of \textUO₂^{2 +} {\text{UO}}_{2}^{2 + } and the detection limit was 8.5 μM. The interference of some concomitant ions during the deposition process of K₂UO₂[Fe(CN)₆] was studied. The proposed method was successfully applied for analysis of some uranium mineral ores.     

Biphasic ethylene polymerisation using ionic liquid over a titanocene catalyst activated by an alkyl aluminium compound

1-n-Butyl-3-methylimidazolium tetrachloroaluminate ([BMIM]⁺[AlCl₄]⁻) was applied to biphasic ionic liquid/hexane ethylene polymerisation as a medium of the Cp₂TiCl₂ titanocene catalyst activated by alkylaluminium compounds (MAO, AlEt₂Cl, AlEt₃). The best results were obtained using AlEt₂Cl. The results show that catalyst recycling, higher ethylene pressure, and greater Al/Ti molar ratio along with a greater volume of the ionic liquid phase enhance catalyst activity. The polyethylene gathered from the hexane phase is characterised primarily by its high purity. Its physical properties remain polyethylene obtained over a heterogeneous metallocene catalyst. Thus, biphasic ionic liquid polymerisation using a metallocene catalyst is possible and offers interesting technological implications.     

Destruction of 2,4-Dichlorophenol in Water Solution Using a Combined Process of Sorption and Plasma Exposure to DBD

The results of studies of the decomposition of 2,4-dichlorophenol (2,4-DCP) in its aqueous solution under the action of atmospheric pressure DBD in an oxygen flow are presented. A new reactor design was used in which the discharge zone was filled with a sorbent (diatomite). It was found that the kinetics of decomposition obeys a first-order kinetic equation for the concentration of 2,4-DCP. The presence of an adsorbent significantly improves the parameters of the decomposition process. Decomposition rates, rate constants and energy efficiency are doubled. So, at a specific discharge power of 1.8 W/cm³ in the presence of a sorbent, the rate constant was ~1 s^?1, and without it, ~0.5 s^?1. The energy efficiency was 0.031 and 0.016 molecules per 100 eV, respectively. The parameters of the treated solution are improved in terms of its potential toxicity. The concentrations of the main decomposition products (aldehydes, carboxylic acids) in the presence of a sorbent are significantly less than without it. This is due to an increase in the rate of conversion of these products into carbon dioxide molecules. It was also shown that the decomposition of one 2,4-DCP molecule leads to the formation of two chloride ions in solution, and the ozone formed in the discharge does not significantly affect the destruction process.

     

Solubility of CO2 in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]⁺) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF₆]^?), trifluoromethanesulfonate ([OTf]^?), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]^?) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky–Kasarnovsky equation and Henry’s law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO₂ in the ILs studied follows the same behaviour as the corresponding conventional 1-ethyl-3-methylimidazolium ([emim]⁺) based ILs with the same anions, i.e. [hemim][NTf₂] > [hemim][OTf] > [hemim][PF₆] > [hemim][BF₄].     

Degradation of organic pollutants by visible light synergistic electro-Fenton oxidation process

Visible light irradiation combined with homogeneous iron and/or hydrogen peroxide to degrade organic dye rhodamine B (RhB) and small molecular compound 2,4-dichlorophenol (2,4-DCP) in a home-made bottle reactor was assessed. The concen-tration of oxidize species, Fe3+ and Fe2+ were determined during the degradation process. The results demonstrated that visible light irradiation combined with electro-Fenton improved the degradation efficiency. Moreover, both RhB and 2,4-DCP were mineralized during visible light synergistic electro-Fenton oxidation process. 95.0% TOC (total organic carbon) removal rate of RhB occurred after 90 min and 96.7% of COD (chemical oxygen demand) removal rate after 65 min of irradiation. 91.3% TOC removal rate of 2,4-DCP occurred after 16 h of irradiation and 99.9% COD removal rate occurred after 12 h of illumination. The degradation and oxidation process was dominated by the hydroxyl radical ( · OH) generated in the system. Both the impressed electricity and dye sensitization by visible light facilitated the conversion between Fe3+ and Fe 2+ , thus, improving Fenton reaction efficiency.     

The Structure of Gallium in Strongly Alkaline,Highly Concentrated Gallate Solutions—a Raman and <Superscript>71</Superscript>Ga-NMR Spectroscopic Study

Highly concentrated alkaline gallate solutions with 0.23≤[Ga(III)]_T≤2.32 mol⋅dm⁻³ and 1≤[NaOH]_T≤15 mol⋅dm⁻³ have been prepared and investigated by Raman and ⁷¹Ga-NMR spectroscopy. Both the Raman and ⁷¹Ga-NMR spectra are consistent with the presence of only one Ga-bearing species in these solutions, the tetrahedral hydroxocomplex, Ga(OH)₄⁻. Contact ion pairs were found to cause variations in the Raman and ⁷¹Ga-NMR parameters that are at the edge of detectability. Other species that have been claimed to exist in the literature, like higher hydroxo complexes (i.e., Ga(OH)₆³⁻) or the μ-oxo-bridged dimer (i.e., (OH)₃Ga-O-(OH)₃²⁻), were not detected by these spectroscopic techniques. If such solution species exist at all, their concentrations are below the detection limit of Raman and ⁷¹Ga-NMR spectroscopy. The behavior of gallium appears to be very similar to that of aluminium under identical conditions, except that the dimeric species detected in aluminate solutions is undetectable in analogous gallates.     

Reaction of sulphate radical anion (SO<Superscript>.</Superscript><Subscript>4</Subscript><Superscript>-</Superscript>) with hydroxy-and methyl-substituted pyrimidines: a pulse radiolysis study

Reactions of sulphate radical anion (SO·₄ ^-) with 4,6-dihydroxy-2-methyl pyrimidine (DHMP), 2,4-dimethyl-6-hydroxy pyrimidine (DMHP), 6-methyl uracil (MU) and 5,6-dimethyl uracil (DMU) have been studied by pulse radiolysis at pH 3 and at pH 10. The transient intermediate spectra were compared with those from the reaction of hydroxyl radical (·OH). It is proposed that SO·₄ ^- produces radical cations of these pyrimidines in the initial stage. These radical cations are short-lived except in the case of DMHP where a relatively longer lived radical cation is proposed to be formed. When there is a hydrogen atom attached to the N(1) or N(3) position, a deprotonation from these sites is highly favored. When there is no hydrogen attached to these sites, deprotonation from a substituted methyl group is favored. At acidic pH, deprotonation from nitrogen is observed for DHMP, MU and DMU. At basic pH, the radical cation reacts with OH^- leading to the formation of OH adducts.     

Molecularly imprinted solid-phase extraction and flow-injection chemiluminescence for trace analysis of 2,4-dichlorophenol in water samples

Highly sensitive flow-injection chemiluminescence (CL) combined with molecularly imprinted solid-phase extraction (MISPE) has been used for determination of 2,4-dichlorophenol (2,4-DCP) in water samples. The molecularly imprinted polymer (MIP) for 2,4-DCP was prepared by non-covalent molecular imprinting methods, using 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EGDMA) as the monomer and cross-linker, respectively. 2,4-DCP could be selectively adsorbed by the MIP and the adsorbed 2,4-DCP was determined by its enhancing effect on the weak chemiluminescence reaction between potassium permanganate and luminol. The enhanced CL intensity was linear in the range from 1 × 10⁻⁷ to 2 × 10⁻⁵g mL⁻¹. The LOD (S/N = 3) was 1.8 × 10⁻⁸g mL⁻¹, and the relative standard deviation (RSD) was 3.0% (n = 11) for 1.4 × 10⁻⁶g mL⁻¹. The proposed method had been successfully applied to the determination of 2,4-DCP in river water. Figure Effect of 4-VP content on the ultraviolet spectrum of 2,4-DCP in chloroform     

Destruction of 2,4 Dichlorophenol in an Atmospheric Pressure Dielectric Barrier Discharge in Oxygen

The processes of degradation of 2,4-dichlorophenol (2,4-DCP) under the action of atmospheric pressure of dielectric barrier discharge (DBD) in oxygen were studied. It was shown that the degradation of 2,4-DCP proceeds efficiently. Degree of decomposition reaches 90%. The degradation kinetics of 2,4-DCP obeys the formal first-order kinetic law on concentration of 2,4-DCP. The effective rate constants depend weakly on the experimental conditions and are equal to ~0.2 s^?1. Based on experimental data, the energy efficiency of decomposition of 2,4-DCP was determined. Depending on the conditions, the energy efficiency was in the range of (8–90) × 10^?3 molecules per 100 eV. The composition of the products was studied by gas chromatography (GC), gas chromatography–mass spectrometry (GC–MS), energy-dispersive X-ray spectroscopy (EDX), attenuated total reflection-fourier transform infrared (ATR-FTIR) spectroscopy, electron spin resonance (ESR) spectroscopy and UV/Visible spectroscopy. It was shown that about ~20% of 2,4-DCP is converted to CO₂, while the other part forms an organic film on the reactor wall. The substance formed is close to the carboxylic acids in chemical composition and exhibits electrical conductivity and paramagnetic properties. Almost all of the chlorine contained in the 2,4-DCP is released into the gas phase. The active species of the afterglow react with liquid hexane, forming the products of its oxidation. Some assumptions regarding the pathway of the process are discussed.     

Synthesis,crystal structure and catalytic performance of bis (imino)pyridyl nickel complexes

Two new Ni(II) complexes of 2,6-bis[1-(2,6-diethylphenylimino)ethyl]pyridine (L¹), 2,6-bis[1-(4-methylphenylimino)ethyl]pyridine (L² ) have been synthesized and structurally characterized. Complex Ni(L¹)Cl₂?·?CH₃CN (1), exhibits a distorted trigonal bipyramidal geometry, whereas complex Ni(L¹)(CH₃CN)Cl₂ (2), is six-coordinate with a geometry that can best be described as distorted octahedral. The catalytic activities of complexes 1, 2, Ni{2,6-bis[1-(2,6-diisopropyl-phenylimino)ethyl]pyridine} Cl₂?·?CH₃CN (3), and Ni{2,6-bis[1-(2,6-dimethylphenylimino) ethyl]pyridine}Cl₂?·?CH₃CN (4), for ethylene polymerization were studied under activation with MAO.