化学反应过渡态的计算方法

化学反应过渡态结构对化学反应机理的研究有重要作用, 但实验上无法直接得到。近年来发展了一些量子化学和分子力学方法, 可以从理论上计算出过渡态结构, 本文对这些计算方法进行了详细介绍。     

化学反应过渡态熵的计算和应用

熵是化合物的重要热力学函数之一,最近有人对此作了改进性计算。计算依据主要取自热力学、光谱学实验数据(如比热、振动频率和转动光谱常数)。对于一些不稳定的反应中间体,尤其是过渡态,上述实验几乎无法进行,熵的实验数据很难获得。Benson等人曾提出过渡态熵的估计方法,但不是纯理论性的。我们利用量子化学对反应体系势能面的研究成果,获得过渡态的谐振动频率、鞍点几何构型,从理论上探讨了过渡态熵的计算。据统计力学,过渡态熵可表示为:     

胰岛素分子相互作用能的计算

胰岛素分子间的相互作用是人们所关心的一个课题,它对探讨胰岛素及其类似物与受休的相互作用和它们在溶液中的行为有着重要的意义,本文在前文工作的基础上,计算了两个胰岛素分子在不同距离和不同取向时的相互作用能,并试图对上述问题的研究提供线索。 我们从胰岛素两聚体的晶体结构数据出发,找出两个单体分子相距最近的三对点,求其中点坐标,在过该三点的平面上作一条垂线,作为分子间平移和转动的参考轴,固     

气相双原子分子自交换电子转移过程中重组能与活化能的相关分析

基于电子转移过程中的基本特征，提出了标度电子转移过程活化能和重组能的两种精确确定方案，并利用有关实验光谱数据拟合的精确势函数对气相双原子分子自交换过程的能量指标进行了确定．分析表明势能面的非谐性修正是重要的，该方案是合理的，所得结果吻合较好，并证明了重组能与活化能并不存在简单的４倍关系．     

氯乙烯的同步幅射光电离及C-H和C-CI键离解能的测定

利用同步辐射对C~2H~2CI进行了光电研究,得到了电离势IP(C~2H~2CI)为10.03±0.01eV及其碎片的光电离出现势,导出了离解能D~0(C~2H~2CI-H),D~0(C~2H~2CI^+-H),D~0(C~2H~2CI-H^+),D~0(C~2H~2-CI)和D~0(C~2H~3^+-CI),它们的值分别为5.09±0.05,5.02±0.08,8.66±0.05,3.64±0.10和2.56±0.05eV.     

—氯甲烷同步辐射光电离研究——离子生成焓与键能的测定

本文报道超音速射流冷却条件下,用同步辐射光研究CH_3Cl光电离及其解离电离的动力学,测得CH_3Cl的电离能(IP)为11.28±0.01eV.通过测定CH_3Cl光解离电离碎片的出现势(AP),并结合有关已确认的热力学数据,获得了它们的标准生成焓、离子型分子中的键能、中性分子或自由基中的键能及母体离子的解离能等热力学数据.对CH_3Cl分子VUV光解离电离通道进行了分析.     

计算平均力势的理论方法

A universal theoretical framework is proposed for calculating potential of mean force (PMF) between two solute particles immersed in a solvent bath, the present method overcomes all of drawbacks of previous methods. The only input required to implement the recipe is solvent density distribution profile around a single solute particle. The universal framework is applied to calculate the PMF between two large spherical particles immersed in small hard sphere solvent bath. Comparison between the present predictions and existing simulation data shows reliability of the present recipe. Effects of solvent-solute interaction detail, solvent bulk density, and solute size on the excess PMF are investigated. The resultant conclusion is that depletion of solvent component by the solute particle induces attractive excess PMF, while gathering of solvent component by the solute particle induces repulsive excess PMF, high solvent bulk density and large solute size can strengthen the tendency of attraction or repulsion. Relevance of transition from depletion attraction to gathering repulsion with the biomolecular interaction, i.e. hydrophobic attraction and hydration repulsion, is discussed.     

几种过渡态结构的有效优化方法

通过双桥反应机理、电环合反应和催化反应三个不同类型的过渡态优化，说明当标准方法难以给出结果时，对物理问题本身的分析有助于给出过渡态优化的线索．第一个例子根据化学问题给出限制条件，通过平衡几何构型优化方法优化得到过渡态；第二个例子是在使用标准过渡态优化方法失败后，根据物理问题从反应途径上用平衡几何构型优化方法选择过渡态优化的初始结构；第三个例子通过Gaussian 98程序中的标准方法QST2直接得到过渡态．     

共轭体系分子轨道能的共振同系规律

同系线性规律已有较多研究.最近戴乾圜等用共振论阐释了同系线性规则,提出了共振同系因子,并用式(1)计算了电子吸收光谱数据的线性相关性.     

Correlation potentials for a multiconfigurational-based density functional theory with exact exchange

A density functional theory based on a complete active space self consistent field (CASSCF) reference function with exact exchange is discussed. It is first shown that such a theory may be formulated with a correlation potential dependent on the density function and on the active space used. Auxiliary functions, such as the on-top two-particle density, are used to define uniquely the potential for different active spaces. The paper also analyses the correlation functional for some atomic and molecular cases. Large ab initio calculations are performed to obtain accurate density functions. A correlation potential is then fitted such that the reference CASSCF function gives the same density. The correlation potential values are saved in a data base for future analysis.     

Simple molecular wavefunctions with correlation corrections II

The potential curves for the ground state of Li₂ (¹ _g ⁺ ) and FH (¹ _g ⁺ ) are computed. The correlation energy is calculated using a functional of the one- and two-electron density matrices derived from an MC SCF reference wavefunction and is added to the reference energy to obtain a correlated potential curve.     

Accurate Theoretical Study of LiS Radical and Its Singly Charged Cation and Anion in their Ground Electronic State

Potential energies of LiS(²Π), LiS^-(¹Σ⁺) and LiS⁺(³Σ^-) are calculated by using the multireference configuration interaction method including Davidson correction and the augmented correlation-consistent basis sets aug-cc-PV(X+d)Z (X=T, Q). Such obtained potential energies are subsequently extrapolated to the complete basis set limit. Both the core-valence correction and the relativistic effect are also considered. The analytical potential energy functions are then obtained by fitting such accurate energies utilizing a least-squares fitting procedure. By using such analytical potential energy functions, we obtain the accurate spectroscopic parameters, complete set of vibrational levels and classical turning points. The present results are compared well with the experimental and other theoretical work.     

Calculation of Spectroscopic Constants for the Ground Electronic States of KRb and RbCs Molecules

The vibrational, rotational, and centrifugal constants have been calculated for the ground electronic states of KRb and RbCs molecules. The calculation is performed using the semiempirical potential curves constructed in a wide range of internuclear distances. The estimated spectroscopic constants are compared with experimental data.     

一种计算Feshbach共振态寿命的新方法

在自然碰撞坐标下构建偏分势能面, 利用数值传播方法求解沿反应坐标的核运动方程, 然后用过渡态波函数的相移因子构造反应体系共振态寿命矩阵. 这是一种直接计算化学反应散射共振寿命的量子散射方法. 用此方法计算了I+HI(υ)→IH(υ’)+I体系的第一散射共振态寿命, 所得数值与Neumark 的高分辨阈值光分离光谱实验的结果相一致.     

The Colle–Salvetti Wavefunction Revisited: a Comparison Between Three Approaches for Obtaining the Correlation Energy

The correlation factor of Colle and Salvetti is studied by comparing the behavior of three different correlation functionals. The normalization, sum rule, Coulomb hole, correlation energy integrand, and the Wigner exclusion hole have all been analyzed by applying the three approaches. The results indicate that the correlation factor proposed by Colle–Salvetti is a very good choice for modeling electron correlation in atoms. The flaws appearing in the development of the Colle–Salvetti equations seem mainly due to an inadequate use of the first mean value theorem of integral calculus. The Gaussian summation used for the two-body density matrix seems to be a good approximation to obtain the correlation factor equations.     

Calculation of correlation energy by many-body diagrammatic perturbation theory

The many-body diagrammatic perturbation theory is used for calculation of the correlation energy of closed-shell molecular systems. We apply Brueckner's concept of the two-particle renormalized interaction defined by a non-linear diagrammatic expression containing all possible (diagonal and/or non-diagonal) particle-particle, hole-hole and particle-hole intermediate elementary processes. Then, a “second-order” simple diagrammatic expression for the correlation energy can be formed, where the correlation energy is approximated by all the diagrams with biexcited intermediate states. An illustrative numerical application for the LiH molecule is presented. This article is dedicated to the memory of our friends and colleagues Dr. Jarka Surá and Dr. Marta Černayová, who tragically died in July 1976.     

苯酚钾及对位取代苯酚钾的电离势

在我们以前的研究工作中发现,酚类钾盐是很好的电荷给体,可以和顺丁烯二酸酐、三硝基苯以及醌类等电荷受体生成电荷转移(CT)络合物。表示分子的给电子能力的参数是分子的第一电离势(简称为电离势I_p)。对于苯酚的I_p值,近年来已有文献记载,但苯酚钾     

A Simple Correlation for Assessment of the Shock Wave Energy in Underwater Detonation

Assessment of underwater detonation (explosion) is important for industrial purposes such as blasting cut of old warship, blasting droll and decoupled charge of blast underwater. Calculation of the shock wave energy requires several expensive experimental data such as the shock wave pressure and the representative time of the process. This work introduces a simple method for reliable prediction of the shock wave energy of composite explosives containing aluminum (Al) and/or ammonium perchlorate (AP), which show non‐ideal behavior. This method is based on the composition, loading density and the ratio of R/m^1/3, where R is the distance between the pressure gauge and charge as well as m is the mass of explosive charge. The measured data for 86 and 21 composite Al/AP explosives are used to construct and test the new model. Statistical parameters including the root mean squared error (RMSE), and maximum of errors (Max Error) of the new model are 0.11 and 0.39 MJ · kg^–1, respectively, which confirm high reliability of the new method. The values of RMSE and Max Error for test set are 0.13 and 0.30 MJ · kg^–1, respectively. Cross validation of the novel model is also used to evaluate its goodness‐of‐fit, goodness‐of‐prediction, accuracy and precision. It is shown that the novel correlation can be applied for pure and composite explosives without Al/AP.     

Orbital correlation effects: The independent pair-potential approximation with application to the ground state and first ionized state of boron hydride

A new method is proposed for calculating correlation effects in atomic and molecular systems. The basis of the method is the formulation of a set of partial configuration expansions which yield directly variational orbital correlation corrections which are appropriately summed in order to obtain an estimate of the total correlation energy. This method is applied to the ground state of boron hydride and its cation at the equilibrium distance of BH. The results of the method are compared in detail with independent electron pair results and second order CI results. It is further shown that multiple substitutions are approximately accounted for in this method and the extent to which they are included is compared with other approximations. Finally, three methods of increasing accuracy, aimed at reducing the necessary computational effort, are given for determining the vertical ionization potential. The most economical method yields an IP of 9.70 eV or 0.03 eV less than the experimental IP. Completion of the basis is estimated to improve this value to 9.77 eV.