Atomic force microscopy study of ferroelectric films of P(VDF-TrFE) copolymer and composites based on it

The surface structure and local piezoelectric response of film samples of P(VDF-TrFE) copolymer and composites based on it were studied by atomic and piezoelectric force microscopy. Lamellar crystals 2.0 × 0.6 μm in size were detected in nominally pure P(VDF-TrFE) samples. Introduction of crystalline ferroelectrics increases the crystalline phase fraction in the polymer matrix and changes the shape and sizes of lamellar crystallites. Hysteresis loops of the local piezoelectric response for composite regions corresponding to the polymer matrix and crystalline ferroelectric inclusions were obtained.     

电泳辅助制备伪1-3陶瓷/聚合物压电复合材料

1-3压电复合材料的压电、介电及铁电性能要远远优于0-3压电复合材料.在制备传统的0-3复合材料过程中引入电泳技术,使得压电颗粒在聚合物基体中取向排列,制备得到伪1-3复合材料.实验结果表明:在制备PZT/环氧树脂0-3复合压电材料固化过程中,采用500 V/mm,4 kHz的电场对其进行电泳辅助取向,可使得颗粒呈现珍珠串状排列,得到伪1-3复合材料;其压电、介电、铁电性能均比原来的0-3复合材料有显著的提高.电泳辅助制备技术用于制备伪1-3复合压电材料具有操作简单、成本低廉、压电、介电、铁电性能显著提高等优点,在智能传感领域具有很好的实际应用前景.     

Electromechanical response of 2-2 layered piezoelectric composites: A micromechanical model based on the asymptotic homogenization method

A micromechanical model based on the asymptotic homogenization technique has been developed to predict the complete elastic, dielectric and piezoelectric properties of a general 2-2 layered piezoelectric composite where the constituent phases are elastically anisotropic and piezoelectrically active. Two classes of layered piezoelectric composites (i.e. longitudinally and transversely layered) are considered in two widely different ceramic- and polymer-based systems and their effective properties are obtained in the limits of both large-volume (i.e. bulk) and small-volume (i.e. thin-film) systems. It is demonstrated that: (i) in the bulk, ceramic–ceramic layered composite system, the elastic, piezoelectric, and dielectric properties of the composites vary linearly with volume fraction of the second phase, while in the bulk ceramic–polymer layered composite system, the corresponding properties vary non-linearly with volume fraction of the second phase; (ii) in the prismatic (thin-film) layered piezoelectric composite system, the non-vanishing, effective elastic, piezoelectric and dielectric properties vary linearly with the volume fraction of the second phase for both the longitudinally and transversely layered composite structures in the ceramic–ceramic and the ceramic–polymer composite systems; (iii) the ceramic–polymer piezoelectric layered composites that incorporate a low density polymeric phase with lower acoustic impedance generally exhibit enhanced piezoelectric coupling constants and lowered acoustic impedance; (iv) the longitudinally layered composites exhibit higher piezoelectric coupling constants and lower acoustic impedance compared to that of the transversely layered composites; and (v) the best combination of properties for applications such as hydrophones (i.e. the highest piezoelectric coupling constants and the lowest acoustic impedance) is obtained in the ceramic–polymer, longitudinally layered, thin-film, piezoelectric composites.     

Investigation of scattering of elastic waves by cylinders in 1-3 piezocomposites

The scattering behavior of P-waves in piezoelectric composites with 1–3 connectivity is studied. The method of wave function expansion is adopted for the theoretical derivations. Analytical expressions are obtained for the distributions of mechanical displacement in z-direction along the circumferences of piezoelectric cylinders. These solutions are used to study the influence of each element of the stiffness matrix and the piezoelectric matrix on the various resonant modes of vibration. Numerical results obtained indicate that perturbations of the elements c₄₄ and e₁₅ significantly affect resonant frequencies and amplitudes, perturbations of c₁₁ and c₁₂ have pronounced effects on resonant modes of high frequencies also. However, the resonant modes are not so sensitive to the perturbations of c₁₃, e₃₁ and e₃₃. The dynamic characteristics of 1–3 connectivity piezoelectric composites exposed here are meaningful for the design and manufacture of sensor/actuator elements by this kind of composites as well as the on-line health monitoring of the mechanical properties variations of the composites itself.     

Piezoelectric composites with a high stability of the piezoelectric modulus under the action of mechanical and temperature fields

New technologies have been proposed for increasing the stability of the piezoelectric modulus d _ij of “polymer-ferroelectric/piezoelectric ceramic” composites under the action of mechanical stresses and temperatures. It has been shown that a decrease in the electronegativity of cations or in the covalency of cation-oxygen bonds of the piezoelectric phase, as well as the cyclic electric and thermal polarization and the crystallization under the action of an electric discharge plasma, leads to an increase in the stability of the piezoelectric modulus of polymer-piezoelectric ceramic composites under the mechanical and temperature actions. A possible mechanism has been proposed underlying the effect of an increase in the stability range of the piezoelectric modulus d _ij due to the crystallization under the action of the electric discharge plasma, the decrease in the covalency of cation-oxygen bonds of the piezoelectric phase, and the cyclic electric and thermal polarization of piezoelectric composites.     

Effective properties of coated fibrous piezoelectric composites with spring-type interfaces under anti-plane mechanical and in-plane electrical loads

In this paper, we investigate the effective properties of three-phase(matrix/coating/fiber) cylindrical piezoelectric composites with imperfect interfaces under anti-plane mechanical and in-plane electrical loads. By using the electromechanically coupling spring-type interface model and the generalized self-consistent method(GSM), we analytically derived the effective electroelastic moduli. The present solutions include as special cases the three-phase cylindrical piezoelectric composites with perfect interfaces as well as the two-phase(matrix/fiber) case with imperfect or perfect interfaces. Selected calculations are graphically shown to demonstrate dependence of the effective moduli on the interfacial properties. The particular size-dependent characteristic due to the interfacial imperfection is also discussed.     

Effective elastic properties of piezoelectric composites with radially polarized cylinders

Effective elastic properties of piezoelectric composites containing an infinitely long, radially polarized cylinder embedded in an isotropic non-piezoelectric matrix are theoretically investigated under an external strain field. Analytical solutions of elastic displacement and electric potentials are exactly derived, and the effective elastic responses are formulated in the dilute limit. Meanwhile, a vanishing piezoelectric response mechanism is revealed in the piezoelectric composite containing radially polarized cylinders. Furthermore, it is shown that the effective elastic properties can be enhanced (or reduced) due to the increase of the piezoelectric (or dielectric) constants of the cylinders.     

Elastic properties of spherically anisotropic piezoelectric composites

Effective elastic properties of spherically anisotropic piezoelectric composites, whose spherically anisotropic piezo-electric inclusions are embedded in an infinite non-piezoelectric matrix, are theoretically investigated. Analytical solutions for the elastic displacements and the electric potentials under a uniform external strain are derived exactly. Taking into account of the coupling effects of elasticity, permittivity and piezoelectricity, the formula is derived for estimating the effective elastic properties based on the average field theory in the dilute limit. An elastic response mechanism is revealed, in which the effective elastic properties increase as inclusion piezoelectric properties increase and inclusion dielectric properties decrease. Moreover, a piezoelectric response mechanism, of which the effective piezoelectric response vanishes due to the symmetry of spherically anisotropic composite, is also disclosed.     

Microstructural Features and Electrophysical Characteristics of Ceramic–Crystal Matrix Composites

The electrophysical properties of ceramic–crystal matrix composites are studied. Piezoelectrically active PZT/LiNbO₃ ceramic matrix composites with LiNbO₃ concentrations of 0–20 vol % are fabricated. Complex elastic, dielectric, and piezoelectric parameters are measured, and the microstructural characteristics of the obtained samples are studied experimentally. It is found that the extreme electrophysical properties of ceramic–crystal matrix composites depend on the properties and structure of the piezoceramic matrix and crystalline filler, and on the matrix microporosity produced during sintering. The electrophysical parameters of ceramic–crystal matrix composites as functions of crystalline filler content are established through the competing microporosity growth effects of the ceramic matrix and the increase in crystalline filler content.     

0-3型压电复合材料覆盖层水下 吸声性能的理论研究

目前压电分流阻尼技术在振动和噪声领域的应用得到了广泛的关注. 本文尝试将压电分流阻尼技术应用于水下吸声领域, 以提高覆盖层的吸声性能. 将压电覆盖层厚度模态的机电方程和声波传播的传递矩阵相结合, 建立一维电声模型. 该模型可以用于分析多层压电和非压电水下吸声覆盖层的吸声性能. 采用该模型分析了0-3型压电复合材料覆盖层的水下吸声性能. 压电复合材料的参数是采用Furukawa的模型计算的. 研究结果表明, 采用合适的分流电阻, 负电容分流电路可以在较宽的频率范围显著提高覆盖层的吸声性能. 其原理可以从阻抗匹配的角度解释, 负电容分流电路可以调整压电覆盖层的表面声阻抗, 使之与水的特性声阻抗相匹配.     

Dynamic effective elastic modulus of polymer matrix composites with dense piezoelectric nano-fibers considering surface/interface effect

Based on effective field method,the dynamic effective elastic modulus of polymer matrix composites embedded with dense piezoelectric nano-fibers is obtained,and the interacting effect of piezoelectric surfaces/interfaces around the nano-fibers is considered.The multiple scattering effects of harmonic anti-plane shear waves between the piezoelectric nano-fibers with surface/interface are averaged by effective field method.To analyze the interacting results among the random nano-fibers,the problem of two typical piezoelectric nano-fibers is introduced by employing the addition theorem of Bessel functions.Through numerical calculations,the influence of the distance between the randomly distributed piezoelectric nano-fibers under different surface/interface parameters is analyzed.The effect of piezoelectric property of surface/interface on the effective shear modulus under different volume fractions is also examined.Comparison with the simplified cases is given to validate this dynamic electro-elastic model.     

Interfacial morphology and domain configurations in 0-3 PZT-Portland cement composites

Cement-based piezoelectric composites have attracted great attention recently due to their promising applications as sensors in smart structures. Lead zirconate titanate (PZT) and Portland cement (PC) composite were fabricated using 60% of PZT by volume. Scanning Electron Microscope and piezoresponse force microscope were used to investigate the morphology and domain configurations at the interfacial zone of PZT-Portland cement composites. Angular PZT ceramic grains were found to bind well with the cement matrix. The submicro-scale domains were clearly observed by piezoresponse force microscope at the interfacial regions between the piezoelectric PZT phase and Portland cement phase, and are clearer than the images obtained for pure PZT. This is thought to be due to the applied internal stress of cement to the PZT ceramic particle which resulted to clearer images.     

铁电/铁磁三相颗粒复合材料的磁电性能计算

采用格林函数方法给出了三相复合材料的磁电系数的解析式，对稀土-铁合金/压电陶瓷/高分子（Terfenol-D/PZT/PVDF）三相颗粒复合材料的磁电系数进行了计算.计算结果给出了复合材料的磁电性能与材料显微结构的关系，包括三相颗粒复合材料的磁电性能随组分、颗粒的长径比、PZT颗粒的电极化方向以及外磁场的变化趋势，可为实验设计提供参考和指导.通过合理设计，三相磁电复合材料的性能可以达到数百mV/A.作为一种新的磁电复合材料，三相颗粒复合材料有望成为一种新型高性能易制备的磁电材料. 关键词： 磁电效应 复合材料 格林函数     

Magnetic field dependence of piezoelectric resonance frequency in CoFe2O4–BaTiO3 composites

The particulate and the multilayer CoFe₂O₄(CFO)–BaTiO₃(BT) composites were prepared by the conventional solid state reaction method and the tape casting method, respectively. Both the prepared composites were simultaneously ferroelectric and ferromagnetic at room temperature. For the multilayer composite sample, a piezoelectric resonance frequency remarkably depended on the applied DC magnetic field, while no remarkable magnetic field dependence was observed for the particulate composite samples. An uniform magnetostriction of the CFO phase in the multilayer composite contributes to piezoelectric effect of the BT phases, resulting in the modulation of the piezoelectric resonance frequency.     

The magnetoelectric effect in layered composites Ni0.4Zn0.6Fe2O4—Pb0.95Sr0.05Zr0.53Ti0.47O3

The magnetoelectric effect in two- and three-layered composites based on nickel-zinc ferrite and lead zirconate-titanate was investigated. The value of the magnetoelectric response in layered composites depends largely on the frequency of the alternating magnetic field, the volume ratio of the electric phase forming the composite, and the mechanical interaction between magnetostriction and piezoelectric layers.     

Analyses of axisymmetric waves in layered piezoelectric rods and their composites

An exact treatment of the propagation of axisymmetric waves in coaxial anisotropic assembly of piezoelectric rod systems is presented. The rod system consists of an arbitrary number of coaxial layers, each possessing transversely isotropic symmetry properties. The treatment, which is based on the transfer matrix technique, is capable of deriving the dispersion relations for a variety of situations. These include the case of a single rod system that is either embedded in an infinitely extended solid or fluid host or kept free. The procedure is also adapted to derive approximate solutions for the cases of a periodic fiber distribution in a matrix material, which model unidirectional fiber-reinforced composites. The results are numerically illustrated for a widely used piezoelectric-polymer composite. It is seen that piezoelectric coupling can significantly change the morphology of the dispersive behavior of the composite.     

UV laser micromachining of piezoelectric ceramic using a pulsed Nd:YAG laser

UV laser (=355 nm) ablation of piezoelectric lead zirconate titanate (PZT) ceramics in air has been investigated under different laser parameters. It has been found that there is a critical pulse number (N=750). When the pulse number is smaller than the critical value, the ablation rate decreases with increasing pulse number. Beyond the critical value, the ablation rate becomes constant. The ablation rate and concentrations of O, Zr and Ti on the ablated surface increase with the laser fluence, while the Pb concentration decreases due to the selective evaporation of PbO. The loss of the Pb results in the formation of a metastable pyrochlore phase. ZrO₂ was detected by XPS in the ablated zone. Also, the concentrations of the pyrochlore phase and ZrO₂ increase with increasing laser fluence. These results clearly indicate that the chemical composition and phase structure in the ablated zone strongly depend on the laser fluence. The piezoelectric properties of the cut PZT ceramic samples completely disappear due to the loss of the Pb and the existence of the pyrochlore phase. After these samples were annealed at 1150 °C for 1 h in a PbO-controlled atmosphere, their phase structure and piezoelectric properties were recovered again. Finally, 1–3 and concentric-ring 2–2 PZT/epoxy composites were fabricated by UV laser micromachining and their thickness modes were measured by impedance spectrum analysis and a d₃₃ meter. Both composites show high piezoelectric properties. PACS 81.40.Gh; 77.84.-s     

Piezoelectric properties of polymer-piezoelectric ceramic composites crystallized under the action of an electric-discharge plasma

The crystallization of a polymer-piezoelectric ceramic composite under the action of electric-discharge temperature and plasma is shown to cause strong oxidation of polymer chains, which increases the concentration of charge localization centers or the number of local levels in the quasi-bandgap of the polymer phase in the composite. In turn, this oxidation is accompanied by an increase in the interphase charges during electrothermal polarization, which favor effective polarization of piezophase domains and, hence, an increase in the piezoelectric properties. The degree of oxidation of the polymer phase is found to be controlled by the nature of the electric discharges used for composite crystallization. It is experimentally shown that piezoelectric composites should be crystallized under the action of a microdischarge that does not reach the streamer phase of its development. The optimum crystallization conditions are determined.     

Analytical formulas for complex permittivity of periodic composites. Estimation of gain and loss enhancement in active and passive composites

ABSTRACT

The asymptotic homogenization method is applied to complex dielectric periodic composites. An equivalence to coupled dielectric problems with real coefficients is shown. This is similar to a piezoelectric problem: an out-plane mechanical displacement and an in-plane electric potential establishing a correspondence principle. Closed-form formulas for the complex dielectric effective tensor in the case of a square array of circular inclusions embedded in a matrix are given. These formulas are written in terms of a real and symmetric matrix which facilitates the implementation of the computational scheme. We also get similar formulas for multilayered complex dielectric composites. The real closed-form formulas are advantageous for estimating gain and loss enhancement properties of active and passive composites in certain volume fraction intervals. Numerical computations are performed and the results are compared with other approaches showing the usefulness of the obtained formulas. This may be of interest in the context of metamaterials.     

0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3单晶/环氧树脂1-3型复合材料的压电性能研究

模拟了0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃(PMN-0.3PT)单晶1-3型压电复合材料的性能与单晶体积分数的关系,得出性能最优时压电相的体积分数为64%, 在这一体积分数下,采用切割-填充法,并使用了不同类型的环氧树脂填充制备复合材料.系统地研究了聚合物相对复合材料性能的影响,研究表明,减小聚合物相的刚度系数c和密度ρ有利于提高复合材料的性能,且聚合物相与压电相的结合强度对性能的影响非常明显,制备的PMN-0.3 PT单晶1-3型复合材料的厚度伸缩机电耦合系数k_t高达90.1%,压电系数d₃₃大于1000pC/N,机械品质因数Q_m为10.39,声阻抗Z也大大降低,性能明显优于传统的Pb(Zr_xTi_1-x)O₃(PZT)陶瓷及其1-3复合材料,在压电换能器和传感器中显示出广阔的前景. 关键词： PMN-PT单晶 压电复合材料 压电相 聚合物相