Synthesis of nickel metal nanoparticles via a chemical reduction of nickel ammine and alkylamine complexes by hydrazine

Nickel nanoparticles were prepared from their coordination compounds, such as [Ni(NH₃)₆]Cl₂, [Ni(N₂H₄)₂Cl₂], [Ni(HNEt₂)₆]Cl₂, and [Ni(H₂NBu)₆]Cl₂ in aqueous solution by chemical reduction. The reaction of nickel ammine and alkylamine complexes with hydrazine monohydrate as a reducing agent was carried out at 90 °C and pH = 10–12. Depending on the influencing parameters such as oxidizing agent, pH, and temperature, the hydrazine reaction can be carried out in different pathways. The chemical reduction method is a simple procedure and also is the best one in the controlling of composition, size, and shape of Ni powder. The reduction of nickel complexes into the metallic Ni powder occurs via the dissociation of complexes and reduction by hydrazine in alkaline solution. Therefore, complexing agents have the most effect on the reduction reaction. The results show that, when the ligands in complexes were changed from ammine to diethylamine and butylamine, respectively, the crystalline size and morphology of nickel metal nanoparticles are changed. The chemical reduction of nickel complexes into metallic nickel can be accompanied with a change in the crystalline system. The pure nickel crystalline has a face-centered cubic structure. The nickel nanoparticles were characterized using IR spectroscopy, X-ray powder diffraction, scanning electron microscopy and vibrating sample magnetometer analyses.     

Study of nickel nanoparticles supported on activated carbon prepared by aqueous hydrazine reduction

Nickel nanoparticles were obtained by the reduction in hydrazine aqueous media of nickel acetate as a precursor supported on activated carbon of high surface area. Classical catalysts using nickel acetate or nitrate were prepared for comparison. The catalysts were characterized by N(2) physisorption, H(2)-TPR, H(2)-adsorption, TPD, TEM, and XRD, and tested in the gas phase hydrogenation of benzene. Hydrazine catalysts were found much more active in benzene hydrogenation than corresponding classically prepared catalysts. Remarkably, their reactivity is comparable (turn-over frequency of 0.2001-0.2539 s(-1) at 393 K) to that of Pt classical catalysts supported on activated carbon in the same conditions. Evidence is given for the existence of the hydrogen spillover effect in benzene hydrogenation, not reported before in the literature. As a result of the hydrogen spillover effect, catalysts performances can be explained by a combination of surface metal atom reactivity, metal-support interaction strength, and specific surface area extent. Maximum effect is observed with hydrazine preparation method, for 1% Ni content and nickel acetate as a precursor. Unexpectedly, it was also found that hydrazine preparation increases the specific area of the catalysts.     

Synthesis and characterization of lipid-polymer hybrid nanoparticles with pH-triggered poly(ethylene glycol) shedding

Novel lipid-polymer hybrid nanoparticles are designed with a poly(ethylene glycol) (PEG) coating that is shed in response to a low pH trigger. This allows the nanoparticles to be stable during systemic circulation and at neutral pH, but destabilize and fuse with lipid membranes in acidic environments. The hybrid nanoparticles consist of a poly(lactic-co-glycolic acid) core with a lipid and lipid-PEG monolayer shell. To make the hybrid nanoparticles pH sensitive, a lipid-(succinate)-mPEG conjugate is synthesized to provide a hydrolyzable PEG stealth layer that is shed off the particle surface at low pH. The pH-sensitivity of the nanoparticles is tunable using the molar concentration of the lipid-(succinate)-mPEG incorporated in the lipid shell of the particles. Possible uses of these pH-sensitive nanoparticles include aggregating in acidic tumor microenvironments, escaping acidified endosomes, or aggregating in deep lung tissue for improved inhalation administration.     

Synthesis and characterization of poly(ethylene glycol) derivatives

Five general routes for the preparation of polyoxyethylene [generally referred to as poly(ethylene glycol) or PEG] derivatives are described. These routes are (1) nucleophilic displacements with the alkoxide of PEG, (2) nucleophilic displacement on PEG–tosylate, –mesylate, or –bromide, (3) reductive amination of PEG–aldehyde, (4) reductive amination of PEG–amine, and (5) nucleophilic displacements on the s-triazine derivatives prepared from s-triazine trichloride (cyanuric chloride) and PEG. Eighteen derivatives are prepared and potential applications to catalysis, cell purifications, and other areas are discussed briefly.     

Synthesis and characterization of nickel nanoparticles dispersed in imidazolium ionic liquids

The diameter and size-distribution of Ni nanoparticles prepared by the decomposition of [bis(1,5-cyclooctadiene)nickel(0)] organometallic precursor dissolved in 1-alkyl-3-methylimidazolium N-bis(trifluoromethanesulfonyl) amide ionic liquids depend on the length of the alkyl side-chain of the imidazolium ring. The increase of the organization range order of the ionic liquid that increases with that of the alkyl side-chain (from n-butyl to n-hexadecyl) induces the formation of nanoparticles with a smaller diameter and size-distribution. The cubic fcc Ni nanoparticles with 4.9 +/- 0.9 to 5.9 +/- 1.4 nm in mean diameter and monomodal size-distribution thus prepared are probably composed of a small cap layer of NiO around a core of Ni metal. The contribution of the oxide layer also depends on the medium i.e. the metal oxide ratio increases in salts containing four to eight carbons on their side-chains and then decreases as the number of carbons increases. The Ni nanoparticles dispersed in the ionic liquids are active catalysts for the hydrogenation of olefins under relatively mild reaction conditions.     

Synthesis, characterization and ethylene reactivity of 2-diphenylphosphanylbenzamido nickel complexes

Addition of primary amines to N-[2-(diphenylphosphanyl)benzoyloxy]succinimide affords 2-diphenylphosphanylbenzamides, Ph2PC6H4C(O)NHR (R = C(CH3)3, 3; R = H, 4; R = CH2CH2CH3, 5; R = CH(CH3)2, 6). Addition of NiCl(eta3-CH2C6H5)(PMe3) to the deprotonated potassium salts of the amides and subsequent treatment of two equivalents of B(C6F5)3 to the resulting products furnishes eta3-benzyl zwitterionic nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta3-CH2C6H5) (R = C6H5, 9; R = C(CH3)3, 10; R = H, 11; R = CH2CH2CH3, 12; R = CH(CH3)2, 13). Solid structures of 9, 11, 13 and the intermediate eta1-benzyl nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta1-CH2C6H5)(PMe3) (R = C6H5, 7; R = C(CH3)3, 8) were determined by X-ray crystallography. When ethylene is added to the eta3-benzyl zwitterionic nickel(II) complexes, butene is obtained by the complexes 9-12 but complex 13 provides very high molecular-weight branched polyethylene (Mw, approximately 1300000) with excellent activity (up to 5200 kg mol-1 h-1 at 100 psi gauge).     

Synthesis and characterization of ordered polyurethanes from nonsymmetric diisocyanate and ethylene glycol

An ordered polyurethane with a head‐to‐head (H‐H) or tail‐to‐tail (T‐T) content over 95% was prepared by polyaddition reaction of a nonsymmetric monomer, p‐isocyanatobenzyl isocyanate (1) with a symmetric monomer, ethylene glycol (2). The model reactions were studied in detail to demonstrate the feasibility of polymer formation. The polymerization was conducted in THF in the presence of triethylamine (TEA) at 0 °C by slow addition of a half amount of 2 to 1, followed by removing THF and then adding the rest of 2 in DMF at once at 30 °C in the presence of dibutyltin dilaurate (DBTL). The microstructure of the polymer obtained was investigated by ¹³C NMR spectroscopy, and it was found that the polymer had the expected structural regularity. The constitutional regularity of polymers influenced their thermal properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2106–2114, 2000     

Synthesis and characterization of nickel sulfide nanoparticles via cyclic microwave radiation

In current study, nanoparticles of NiS were synthesized by applying microwave radiation. The effect of concentration of sulfur source, reaction time, and power of microwave irradiation on the treatment process was investigated. The morphology, structure, and composition of the as-synthesized nanostructures have been confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Optical properties of as-prepared sample were investigated by photoluminescence spectroscopy; the emission peak is at 555.04 nm and shows the blue shift.     

超支化PAMAM桥联乙烯齐聚用镍系催化剂的合成与表征

以系列直链脂肪胺为核的低代超支化聚酰胺-胺(PAMAM)和水杨醛为原料,通过席夫碱反应制备系列新型超支化PAMAM桥联水杨醛亚胺配体;以无水Ni Cl2为络合试剂,通过络合反应合成系列超支化PAMAM桥联镍催化剂,采用FT-IR和1H NMR证实合成的系列新型配体和镍系催化剂的结构与其理论结构相符.对系列超支化PAMAM桥联镍催化剂催化乙烯齐聚的性能进行了研究,结果表明,超支化PAMAM桥联镍系催化剂配体骨架烷基链长度对其催化活性和选择性影响较小,助催化剂和溶剂影响较大;倍半乙基氯化铝为助催化剂,甲苯为溶剂时,聚合活性较高,产物中C8以上的高碳产物的含量最高;其中以十四胺为核的超支化PAMAM桥联镍催化剂为主催化剂、倍半乙基氯化铝为助催化剂、甲苯为溶剂时,催化乙烯齐聚活性高达1.96×106 g/(mol·h),齐聚产物中C8以上的高碳产物含量为98.77%.     

Synthesis and characterization of terminally carboxyl ethylene glycol monomethyl ethers-substituted side-chain liquid-crystalline polysiloxanes

Alkene monomers containing phenyl or biphenyl carboxylate benzoate ester based on a mesogenic group of varied lengths of carboxyl oligo (ethanediol) monomethyl ethers as the terminal were synthesized. They were grafted onto poly(methyl-hydrosiloxane) by the platinum-catalyzed hydrosilylation process. The thermal transition temperatures and mesophase textures of monomers and of polymers were characterized by using differential scanning calorimetry (DSC), x-ray diffraction, and polarized optical microscopy with a hot stage. The factors governing mesophase textures and thermal transition temperatures are discussed. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(ethylene glycol) polymers functionalized by terminal tributyltin carboxylate moieties

Novel polymeric derivatives of various average molecular weights bearing tributyltin carboxylate moieties as terminal groups have been prepared by esterification with bis(tributyltin) oxide of the corresponding poly(ethylene glycol)s functionalized with dimethylenecarboxylic end groups. Low‐molecular‐weight compounds have also been synthesized, with the aim of investigating the influence of the polymeric chain on tin properties. As investigated by Sn NMR and Fourier transform infrared, the metal center appears to be completely tetracoordinated in chloroform solution at room temperature, whereas at low temperature, the tin atom undergoes a fast exchange between intramolecular pentacoordination with the ethereal oxygen atoms and the unassociated form. In the solid state, even at room temperature, all the polymeric products exhibit both tetracoordination and pentacoordination at tin, the latter achieved by interaction with both ethereal and carbonyl oxygens. The thermal behavior of the series of compounds indicates the presence of crystalline domains in the material, which can be ascribed either to intermolecular interactions at tin, giving rise to organometal aggregates, or to the formation of an ordered phase induced by the presence of the macromolecular chain, depending on the more or less elevated relative concentration of the organotin moieties in the sample. These findings are also confirmed by the X‐ray diffractions patterns of the investigated products. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3091–3104, 2005     

Electrochemical synthesis of free-standing CdS nanoparticles in ethylene glycol

A novel one-step electrochemical method for the preparation of capping-free cadmium sulfide nanoparticles is described. With gold as the working electrode, capping-free CdS nanoparticles are synthesized very conveniently at 70°C in the ethylene glycol (EG) solution of elementary sulfur, cadmium salt, and supporting electrolyte at −0.1 V. By carefully selecting the reductive potential, elementary sulfur is reduced while the reduction of Cd²⁺ is blocked by the formation of a sulfur monolayer on the gold electrode surface. The produced S²⁻ reacts with cadmium cations in the solution to produce CdS. In this method, magnetic stirring can effectively prevent the deposition of CdS on the electrode surface. XRD analysis indicates that the product is pure cubic-phase CdS. The size and morphology of the particles are studied by TEM. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 9, pp. 1060–1064. The text was submitted by the authors in English.     

Hydrogen-transfer reduction of carbonyl compounds catalysed by nickel nanoparticles

We report for the first time the hydrogen-transfer reduction of carbonyl compounds catalysed by well-defined nickel(0) nanoparticles. The nickel nanoparticles could be reutilised several times in a very simple reaction medium composed of the nickel nanoparticles, isopropanol and the substrate, without any added base.     

Synthesis and characterization of poly(ethylene glycol) methyl ether endcapped poly(ethylene terephthalate)

Linear and branched poly(ethylene terephthalate) (PET) copolymers with polyethylene glycol) (PEG) methyl ether (700 or 2000 g/mol) end groups were synthesized using conventional melt polymerization. DSC analysis demonstrated that low levels of PEG end groups accelerated PET crystallization. The incorporated PEG end groups also decreased the crystallization temperature of PET dramatically, and copolymers with a high content of PEG (>17.6 wt%) were able to crystallize at room temperature. Rheological analysis demonstrated that the presence of PEG end groups effectively decreased the melt viscosities and facilitated melt processing. XPS and ATR-FTIR revealed that the PEG end groups tended to aggregate on the surface, and the surface of compression molded films containing 34.0 wt% PEG were PEG rich (85 wt% PEG). PEG end-capped PET (34.0 wt% PEG) and PET films were immersed into a fibrinogen solution (0.7 mg/mL BSA) for 72 h to investigate the propensity for protein adhesion. XPS demonstrated that the concentration of nitrogen (1.05%) on the surface of PEG endcapped PET film was statistically lower than PET (7.67%). SEM analysis was consistent with XPS results, and revealed the presence of adsorbed protein on the surface of PET films.     

Hydrogen-transfer reduction of carbonyl compounds promoted by nickel nanoparticles

Nickel(0) nanoparticles, generated from nickel(II) chloride, lithium powder and a catalytic amount of 4,4-di-tert-butylbiphenyl (DTBB) in THF at room temperature, have been found to promote the reduction of a variety of ketones and aldehydes by transfer hydrogenation using isopropanol as the hydrogen donor. The nickel nanoparticles were characterised and could be re-utilised with a good performance in the absence of a base. A mechanistic study demonstrates that the reaction proceeds through a dihydride-type mechanism.     

Synthesis,characterization, and ethylene oligomerization of three novel dendritic nickel catalysts

Three dendritic nickel complexes C1–C3 were synthesized from three poly(amido amine) dendrimers, salicylic aldehyde and nickel chloride hexahydrate via Schiff base condensation reaction and coordination reaction. The structures of the dendritic ligands and nickel complexes were characterized by FT-IR, UV, ¹H NMR, ESI–MS, and elemental analysis. When activated with aluminum co-catalysts, three complexes C1–C3 were able to catalyze ethylene oligomerization. The catalytic activities and the product distribution of complexes C1–C3 were depended on the reaction parameter, co-catalyst, solvent, and the structure of the pre-catalyst. When using ethyl aluminum sesquichloride (EASC) as co-catalyst in toluene, the catalytic activity of complex C3 containing the longest bridging methylene groups reached the highest value of 1.63 × 10⁶ g·(mol Ni·h)^?1 with 69.15% C₁₁ in the product at 30 min, 25 °C, 0.5 MPa, and Al/Ni ratio of 900.     

Synthesis of poly(ethylene glycol) block copolymers by a redox process and their spectral characterization

Novel block copolymers of poly(ethylene glycol) (PEG) with acrylamide (AAm) and methacrylic acid (MAA) were synthesized using a redox system consisting of ceric ions and PEG in aqueous acidic medium. The molecular weight of PEG in the redox system was varied to obtain a series of block copolymers with differing molecular weights of PEG segment. The polymerization proceeded via macroradical generation, which was substantiated by ESR spectroscopy. This macroradical acted as a redox macroinitiator for the block copolymerization of the vinyl monomers. The formation of the block copolymers was confirmed by fractional precipitation technique.     

Synthesis and characterization of poly(ethylene glycol) grafted poly(L-lactide)

Poly(ethylene glycol) grafted poly(L -lactide) was prepared by ring opening polymerization of L -lactide and epoxy-terminated poly(ethylene glycol) methyl ether (PEGME). Stannous octoate and Al(Et)₃·0.5 H₂O were tested as polymerization catalysts, and Al(Et)₃·0.5 H₂O was found to be more effective for the ring-opening of the epoxy group of the modified PEGME monomer. The synthesized polymers were characterized by NMR and the efficiency of the incorporation of epoxy-terminated PEGME in the copolymer was determined.     

The thermal conductivity of alumina nanoparticles dispersed in ethylene glycol

The thermal conductivities of several nanofluids (dispersions of alumina nanoparticles in ethylene glycol) were measured at temperatures ranging from 298 to 411 K using a liquid metal transient hot wire apparatus. Our measurements span the widest range of temperatures that have been investigated to date for any nanofluid. A maximum in the thermal conductivity versus temperature behavior was observed at all mass fractions of nanoparticles, closely following the behavior of the base fluid (ethylene glycol). Our results confirm that additional temperature contributions inherent in Brownian motion models are not necessary to describe the temperature dependence of the thermal conductivity of nanofluids. Our results also show that the effect of mass or volume fraction of nanoparticles on the thermal conductivity of nanofluids can be correlated using the Hamilton and Crosser or Yu and Choi models with one adjustable parameter (the shape factor in the Hamilton and Crosser model, or the ordered liquid layer thickness in the Yu and Choi model).