共查询到13条相似文献,搜索用时 62 毫秒
1.
2.
3.
4.
针对多波束反向散射强度(Backscatter Strength,BS)数据在采集过程中受到声学散射机理而产生的角度响应(Angular Response,AR)影响,而目前声学硬件方面尚未完美解决且现有后处理改正方法在复杂海底底质环境下适应性较差,尤其在高入射角区域的改正效果甚为不理想的问题,为此,给出了一种基于散射强度的自适应角度响应改正模型。首先获取连续脉冲(Ping)平均散射强度数据的角度响应曲线;其次使用高斯拟合方法对角度响应曲线进行平滑拟合处理,进而对其解算二阶导数提取角度响应模型改正参数;最后给出顾及高入射角区域的单Ping反向散射强度数据的分段处理改正模型。实验结果表明,该方法与传统方法相比,整个发射扇区散射强度平均偏差精度约提高30V,尤其在影响较大的高入射角区域,平均偏差精度约提高40V,并且该区域的标准差精度也提高了近30%。该模型较好地解决了多波束在非正射情况下获取海底精准散射声强的问题,削弱了声波散射机理的影响;同时也解决了散射强度过渡不均衡、中央波束区域改正异常等问题。因此,提高了多波束反向散射强度的可靠性,可以真实地呈现出海底实际的地貌。 相似文献
5.
A simple and straight forward method for acoustic impedance measurement is presented and evaluated. In this method a speaker is used as the signal source. The relationship between the electrical impedance of the speaker and its acoustical load is developed and studied. It is shown that the electrical current and voltage of the speaker relate to the acoustical pressure and volume velocity. The mechanical and acoustical impedances are therefore easily derived by measuring the electrical current and voltage of the circuit. The proposed method yield itself to the automatic computer measurement and can be used for the field and in situ measurements.Comparison of the measurement data with those from other methods proves the applicability and accuracy of the proposed method. 相似文献
6.
7.
Manipulation of micro-objects have been playing an essential role in biochemical analysis or clinical diagnostics. Among the diverse technologies for micromanipulation, acoustic methods show the advantages of good biocompatibility, wide tunability, a label-free and contactless manner. Thus, acoustic micromanipulations have been widely exploited in micro-analysis systems. In this article, we reviewed the acoustic micromanipulation systems that were actuated by sub-MHz acoustic waves. In contrast to the high-frequency range, the acoustic microsystems operating at sub-MHz acoustic frequency are more accessible, whose acoustic sources are at low cost and even available from daily acoustic devices (e.g. buzzers, speakers, piezoelectric plates). The broad availability, with the addition of the advantages of acoustic micromanipulation, make sub-MHz microsystems promising for a variety of biomedical applications. Here, we review recent progresses in sub-MHz acoustic micromanipulation technologies, focusing on their applications in biomedical fields. These technologies are based on the basic acoustic phenomenon, such as cavitation, acoustic radiation force, and acoustic streaming. And categorized by their applications, we introduce these systems for mixing, pumping and droplet generation, separation and enrichment, patterning, rotation, propulsion and actuation. The diverse applications of these systems hold great promise for a wide range of enhancements in biomedicines and attract increasing interest for further investigation. 相似文献
8.
Wendong Wu Adewale Adeosun Richard L. Axelbaum 《Proceedings of the Combustion Institute》2019,37(2):1409-1415
The optical emissions from laser-induced plasmas have been successfully exploited for elemental composition measurements in flames; however, the information from the accompanying plasma-generated acoustic emissions has not been well utilized. In this study, we investigated the influence of flame temperature and composition on the acoustic emissions from laser-induced plasmas in an ethylene-air premixed flame. The acoustic emissions are sensitive to temperature, and a negative correlation can be established. The effect of composition on acoustic emissions was found to be second order compared to that of temperature. Based on these findings, we introduce acoustic-based laser-induced breakdown thermometry (LIBT). A statistical analysis was performed to mitigate the bias introduced by anomalous extreme values. The spatial and temporal resolution of LIBT were also analyzed to demonstrate its potential to perform simultaneous composition and temperature measurements when used along with laser induced breakdown spectroscopy (LIBS). Finally, the temperature distribution in an ethylene-air counter-flow diffusion flame was measured; and the results compared favorably with numerical results. 相似文献
9.
A novel acoustic emission beamforming method with two uniform linear arrays on plate-like structures
A novel acoustic emission (AE) source localization approach based on beamforming with two uniform linear arrays is proposed, which can localize acoustic sources without accurate velocity, and is particularly suited for plate-like structures. Two uniform line arrays are distributed in the x-axis direction and y-axis direction. The accurate x and y coordinates of AE source are determined by the two arrays respectively. To verify the location accuracy and effectiveness of the proposed approach, the simulation of AE wave propagation in a steel plate based on the finite element method and the pencil-lead-broken experiment are conducted, and the AE signals obtained from the simulations and experiments are analyzed using the proposed method. Moreover, to study the ability of the proposed method more comprehensive, a plate of carbon fiber reinforced plastics is taken for the pencil-lead-broken test, and the AE source localization is also realized. The results indicate that the two uniform linear arrays can localize different sources accurately in two directions even though the localizing velocity is deviated from the real velocity, which demonstrates the effectiveness of the proposed method in AE source localization for plate-like structures. 相似文献
10.
We incorporated a cell-wise acoustic pressure gradient smoothing operation into the standard compatible finite element method and extended the smoothed finite element method (SFEM) for 2D acoustic problems. This enhancement was especially useful for dealing with the problem of an arbitrary shape with violent distortion elements. In this method, the domain integrals that involve shape function gradients can be converted into boundary integrals that involve only shape functions. Restrictions on the shape elements can be removed, and the problem domain can be discretized in more flexible ways. Numerical results showed that the proposed method achieved more accurate results and higher convergence rates than the corresponding finite element methods, even for violently distorted meshes. The most promising feature of SFEM is its insensitivity to mesh distortion. The superiority of the method is remarkable, especially when solving problems that have high wave numbers. Hence, SFEM can be beneficially applied in solving two-dimensional acoustic problems with severely distorted elements, which, in practice, have more foreground than regularity mesh. 相似文献
11.
A common problem for large factories that wish to decrease their environmental acoustic impact on neighbouring locations is to find out the acoustic power of every noise source. As these factories cannot stop their activity in order to measure each source individually, a procedure is needed to obtain the acoustic powers with the factory under normal operating conditions. Their contribution to the overall sound pressure level at each neighbouring location can then be found and it is possible to calculate the improvements obtained after any modification of the sources. In this paper an inversion modelling method is used to do so. Acoustic powers are obtained by means of field sound pressure level measurements and with the use of a sound propagation software. A careful analysis of the solution has been carried out by simulating errors on the measured data in order to detect possible correlations between the acoustic power of different sources and avoid misleading interpretations of the results. The whole methodology has been applied to a liquid-gas production factory. 相似文献
12.
《Ultrasonics sonochemistry》2014,21(3):909-919
Numerical methods for the calculation of the acoustic field inside sonoreactors have rapidly emerged in the last 15 years. This paper summarizes some of the most important works on this topic presented in the past, along with the diverse numerical works that have been published since then, reviewing the state of the art from a qualitative point of view. In this sense, we illustrate and discuss some of the models recently developed by the scientific community to deal with some of the complex events that take place in a sonochemical reactor such as the vibration of the reactor walls and the nonlinear phenomena inherent to the presence of ultrasonic cavitation. In addition, we point out some of the upcoming challenges that must be addressed in order to develop a reliable tool for the proper designing of efficient sonoreactors and the scale-up of sonochemical processes. 相似文献
13.
Fiberscopic video laryngoscopy was performed on five professional singers to determine the presence or absence of aryepiglottic narrowing as a function of voice quality. Each sang “Happy Birthday” and parts of the “Star Spangled Banner” in six different voice qualities: speech, falsetto, sob (a low larynx with a vocal tract expanded by relaxing the middle constrictors), twang, belting, and opera. Several features were found to be common among the subjects and related to specific qualities. Aryepiglottic constriction was present in all singers in twang, belting, and opera qualities. Spectrographic analysis related the constriction to the presence of the “singer's formant.” The presence of this type of constrictive behavior will require further research to ascertain the possible benefits to those for whom a louder voice is essential and to understand the relationship of this constrictive maneuver to the natural closure functions of the larynx. 相似文献