Controllable synthesis and highly efficient electrocatalytic oxidation performance of SnO2/CNT core-shell structures

In this work, the nanocomposites, carbon nanotubes (CNTs) coated with nanosized uninterrupted SnO₂, were prepared controllably by a facile solvothermal method. The obtained nanocomposites have a thin overlayer which is made of nanoparticles with a diameter of ∼3 nm. The products were characterized by X-ray diffraction and transmission electron microscopy. The obtained SnO₂/CNTs have an excellent electrocatalytic oxidation performance for the X-3B, a kind of dye. The parameters affecting the electrocatalytic activity were investigated in details. The excellent catalytic property of the SnO₂/CNT electrodes can be explained as follows: (1) high specific surface area gives more active sites for X-3B oxidation; (2) the formation of thin, uniform, and uninterrupted coverage of SnO₂ nanoparticles on CNTs raises the potential of oxygen evolution and the current efficiency; and (3) the CNTs increase the conductivity of the electrodes, which results in the increase of the current efficiency.     

One‐Dimensional Magnetic Composite of Polypyrrole‐Containing Carbon Nanotubes/Ni0.75Zn0.25Fe2O4

A novel one‐dimensional electromagnetic nanocomposite of polypyrrole (PPY) containing carbon nanotubes (CNTs)/Ni_0.75Zn_0.25Fe₂O₄ was synthesized by an in‐situ polymerization method. The composite was characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and Fourier transform infrared. The XRD results confirmed that PPY, CNTs, and Ni_0.75Zn_0.25Fe₂O₄ coexisted in the composite. The TEM and HRTEM results indicated that PPY coated the surface of the CNTs/Ni_0.75Zn_0.25Fe₂O₄ with a thickness of 15–30 nm. The lattice spacings, according to the first main peak of the CNTs, Ni_0.75Zn_0.25Fe₂O₄, and PPY, was about 0.34 nm, 0.25 nm, and 0.42 nm, respectively. The FTIR result also indicated that the PPY formed in the composite. A test of magnetic properties indicated that the composite was ferromagnetic with the saturated magnetization of 12.86 electromagnetic units (emu)/g, and the coercive of 127.18 Oersted (Oe).     

Diffusion of CO2/CH4 confined in narrow carbon nanotube bundles

ABSTRACT

The diffusion of a CO₂/CH₄ mixture in carbon nanotube (CNT) bundles was studied using molecular simulations. The effect of diameter and temperature on the diffusion of the mixture was investigated. Our results show that the single-file diffusion occurs when CO₂ and CH₄ are confined in CNTs of diameter less than 1.0 nm. In CNTs of diameter larger than 1.0 nm, both molecules diffuse in the Fickian style. The transition from single-file to Fickian diffusion was demonstrated for both CO₂ and CH₄ molecules. A dual diffusion mechanism was observed in the studied (20, 0) CNT bundle, single-file diffusion of CO₂ in the interstitial sites of (20, 0) CNT bundle and Fickian diffusion of CO₂ and CH₄ in the pores. For CO₂, the interaction energies (CO₂–CO₂ and CO₂–CNT) are larger than that of CH₄ in all cases. But only a very small difference in the diffusion coefficient was observed between CO₂ and CH₄. Temperature has a negligible effect on the difference between diffusion coefficients of CO₂ and CH₄ in the studied CNT bundles. The adsorption, diffusion and permeation selectivities are discussed and compared, and the adsorption is demonstrated to be the rate limiting step for the separation of CO₂/CH₄ in CNT bundle membranes.     

Nanostructured carbon nanotube/TiO2 composite coatings using electrophoretic deposition (EPD)

Electrophoretic deposition (EPD) has been used to combine multi-walled carbon nanotubes of diameter in the range 20–30 nm and commercially available TiO₂ nanoparticles (23 nm particle size) in composite films. Laminate coatings with up to four layers were produced by sequential EPD, while composite coatings were obtained by electrophoretic co-deposition of carbon nanotubes and TiO₂ nanoparticles, respectively. Scanning electron microscopy was used to characterize the resultant microstructures. The mechanism of EPD of carbon nanotube/TiO₂ nanoparticle composites is discussed.     

Magnetic properties of c-axis oriented Sr0.8La0.2Fe11.8Co0.2O19 ferrite film prepared by chemical solution deposition

A Sr_0.8La_0.2Fe_11.8Co_0.2O₁₉ ferrite film has been prepared on a (0 0 1) sapphire substrate by chemical solution deposition. Structural characteristics indicate that the film is c-axis oriented and single-phase with space group P6₃/mmc. The grains are regular columnar with diameter between 50 and 100 nm as determined by atomic force microscopy. The sample possesses high saturation magnetization (130 emu/cm³), high coercivity (6.9 kOe), and large squareness ratio (0.9) at room temperature, which makes it a promising recording material.     

Variable-range hopping in Fe70Pt30 catalyzed multi-walled carbon nanotubes film

Using low-pressure chemical vapour deposition (LPCVD), multi-walled carbon nanotubes (MWNTs) are grown on nanocrystalline Fe₇₀Pt₃₀ film. The Fe₇₀Pt₃₀ nanocrystalline film is deposited by vapour condensation technique. The size of the nanoparticles varies from 5–10 nm, as inferred from SEM micrographs of Fe₇₀Pt₃₀ film. SEM and TEM observations of as-grown CNTs film reveal that these are multi-walled and their diameter varies from 30–80 nm and length is of the order of several micrometers respectively. There is a structural change from ordinary geometry of CNTs to bamboo shaped as suggested by TEM image. Raman spectra shows sharp G and D bands with a higher intensity of G band showing the presence of graphitic nature of the nanotubes. An experimental study of the temperature dependence of electrical conductivity of MWNTs film is done over a wide temperature range from (293–4 K). The measured data gives a good fit to variable-range hopping (VRH) and the results are interpreted using Mott's (VRH) model. The conduction mechanism of the MWNTs film shows a crossover from the exp[ -(T_o/T)^1/4] law in the temperature range (293–110 K) to exp[ -(T_m/T)^1/3] in the low temperature range (110–4 K). This behaviour is attributed to temperature-induced transition from three-dimension (3D) to two-dimension (2D) VRH. Various Mott's parameters like characteristic temperature (T_m), density of states at Fermi level N(E_F), localization length (ξ), hopping distance (R), hopping energy (W) have also been calculated using above-mentioned model.     

Preparation of ZnO–Al2O3 Particles in a Premixed Flame

Zinc oxide (ZnO) and alumina (Al₂O₃) particles are synthesized by the combustion of their volatilized acetylacetonate precursors in a premixed air–methane flame reactor. The particles are characterized by XRD, transmission electron microscopy, scanning mobility particle sizing and by measurement of the BET specific surface area. Pure (-)alumina particles appear as dendritic aggregates with average mobile diameter 43–93 nm consisting of partly sintered, crystalline primary particles with diameter 7.1–8.8 nm and specific surface area 184–229 m²/g. Pure zinc oxide yields compact, crystalline particles with diameter 25–40 nm and specific surface area 27–43 m²/g. The crystallite size for both oxides, estimated from the XRD line broadening, is comparable to or slightly smaller than the primary particle diameter. The specific surface area increases and the primary particle size decreases with a decreasing flame temperature and a decreasing precursor vapour pressure. The combustion of precursor mixtures leads to composite particles consisting of zinc aluminate ZnAl₂O₄ intermixed with either ZnO or Al₂O₃ phases. The zinc aluminate particles are dendritic aggregates, resembling the alumina particles, and are evidently synthesized to the full extent allowed by the overall precursor composition. The addition of even small amounts of alumina to ZnO increases the specific surface area of the composites significantly, for example, zinc aluminate particles increases to approximately 150 m²/g. The gas-to-particle conversion is initiated by the fast nucleation of Al₂O₃ or ZnAl₂O₃, succeeded by a more gradual condensation of the excess ZnO with a rate probably controlled by the cooling rate for the flame.     

Solvothermal synthesis and characterization of α-Fe2O3 nanodiscs and Mn3O4 nanoparticles with 1,10-phenanthroline

α-Fe₂O₃ nanodiscs and Mn₃O₄ nanoparticles have been prepared by the 1,10-phenanthroline as complexing agent in the presence of sodium hydroxide under hydrothermal conditions. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) spectra. The average diameter of α-Fe₂O₃ nanodiscs is of 2 μm. In the case of Mn₃O₄ sample, the Mn₃O₄ crystallites are nanoparticles with an average size of 34 nm. A formation mechanism for the α-Fe₂O₃ and Mn₃O₄ nanomaterials was proposed.     

Synthesis of multi-walled carbon nanotubes for NH3 gas detection

It has been recently demonstrated that carbon nanotubes (CNTs) represent a new type of chemical sensor capable of detecting a small concentration of molecules such as CO, NO₂, NH₃.In this work, CNTs were synthesized by chemical vapor deposition (CVD) on the SiO₂/Si substrate by decomposition of acetylene (C₂H₂) on sputtered Ni catalyst nanoparticles. Their structural properties are studied by atomic force microscopy, high-resolution scanning electron microscopy (HRSEM) and Raman spectroscopy. The CNTs grown at 700 °C exhibit a low dispersion in size, are about 1 μm long and their average diameter varies in the range 25–60 nm as a function of the deposition time. We have shown that their diameter can be reduced either by annealing in oxygen environment or by growing at lower temperature (less than 600 °C).We developed a test device with interdigital Pt electrodes on an Al₂O₃ substrate in order to evaluate the CNTs-based gas sensor capabilities. We performed room temperature current–voltage measurements for various gas concentrations. The CNT films are found to exhibit a fast response and a high sensitivity to NH₃ gas.     

An XPS study and electrical properties of Pb1.1Zr0.53Ti0.47O3/PbO/Si (MFIS) structures according to the substrate temperature of the PbO buffer layer

PbO and PZT thin films were deposited on the p-type (1 0 0) Si substrate by the rf magnetron sputtering method with PbO and Pb_1.1Zr_0.53Ti_0.47O₃ targets for the application of the metal-ferroelectric-insulator-semiconductor (MFIS) structure. The MFIS structures with the PbO buffer layer show the good electric properties including a high memory window and a low leakage current density. The maximum value of the memory window is 2.0 V under the applied voltage of 9 V for the Pt/PZT (200 nm, 400 °C)/PbO (80 nm)/Si structures with the PbO buffer layer deposited at the substrate temperature of 300 °C. From the X-ray photoelectron spectroscopy (XPS) results, we could confirm that the substrate temperature of PbO affects the chemical states of the interface between the PbO buffer layer and Si substrate, which results in the inter-diffusion of Pb and the formation of the intermediate phases (PbSiO₃). And the existence of the undesired SiO₂ layer, which is the low dielectric layer, was confirmed at the surface region of the Si substrate by the XPS depth profile analysis.     

Photoelectrochemical property and photocatalytic activity of N-doped TiO2 nanotube arrays

N-doped TiO₂ nanotube arrays (NTN) were prepared by anodization and dip-calcination method. Hydrazine hydrate was used as nitrogen source. The surface morphology of samples was characterized by SEM. It showed that the mean size of inner diameter was 65 nm and wall thickness was 15 nm for NTN. The ordered TiO₂ nanotube arrays on Ti substrate can sustain the impact of doping process and post-heat treatment. The atomic ratio of N/Ti was 8/25, which was calculated by EDX. Photoelectrochemical property of NTN was examined by anodic photocurrent response. Results indicated the photocurrent of NTN was nearly twice as that of non-doped TiO₂ nanotube arrays (TN). Photocatalytic activity of NTN was investigated by degrading dye X-3B under visible light. As a result, 99% of X-3B was decomposed by NTN in 105 min, while that of TN was 59%.     

Synthesis and performance of core-shell structured ZnO/In2O3 composites in situ growth

Core-shell structured ZnO/In₂O₃ composites were successfully synthesized via situ growth method. Phase structure, morphology, microstructure and property of the products were investigated by X-ray diffraction (XRD), TG-DTA, field emission scanning electron microscopy (FESEM), energy-dispersive spectrometry (EDS), transmission electron microscope (TEM) and photoluminescence (PL). Results show that the core-shell structures consist of spindle-like ZnO with about 800 nm in length and 200 nm in diameter, and In₂O₃ particles with a diameter of 50 nm coated on the surface of ZnO uniformly. HMTA plays an important role in the formation of core-shell structures and the addition of In₂O₃ has a great effect on PL spectrum. Possible mechanism for the formation of core-shell structures is also proposed in this paper.     

Preparation of spherical and uniform-sized ferrite nanoparticles with diameters between 50 and 150 nm for biomedical applications

Spherical uniform-sized iron ferrite nanoparticles were synthesized by adding a disaccharide and seed ferrite crystals into an aqueous reaction solution. The average size range 50-150 nm was controlled by choosing one out of five disaccharides and by changing the amount of the seed crystals. The particles had a saturation magnetization and a crystalline structure which are similar to those of intermediate Fe₃O₄-γ-Fe₂O₃. When coated with citrate, the particles with nearly 100 nm diameter were stably suspended in water for 2 days. These novel particles will be utilized as magnetic carriers in biomedical applications.     

Stress dependence of growth mode change of epitaxial layered cobaltite γ-Na0.7CoO2

We report stress dependence of growth characteristics of epitaxial γ-Na_0.7CoO₂ films on various substrates deposited by pulsed laser deposition method. On the sapphire substrate, the γ-Na_0.7CoO₂ thin film exhibits spiral surface growth with multi-terraces and highly crystallized texture. For the γ-Na_0.7CoO₂ thin film grown on the (1 1 1) SrTiO₃ substrate, the nano-islands of ∼30 nm diameter on the hexagonal grains are observed. These islands indicate that the growth mode changes from step-flow growth mode to Stranski-Krastanow (SK) growth mode. On the (1 1 1) MgO substrate, the large grains formed by excess adatoms covering an aperture between hexagonal grains are observed. These experimental demonstrations and controllability could provide opportunities of strain effects of Na_xCoO₂, physical properties of thin films, and growth dynamics of heterogeneous epitaxial thin films.     

Electrodeposition of Sb2Se3 on indium-doped tin oxides substrate: Nucleation and growth

The mechanisms related to the initial stages of the nucleation and growth of antimony selenide (Sb₂Se₃) semiconductor compounds onto the indium-doped tin oxides (ITO) coated glass surface have been investigated using chronoamperometry (CA) technique. The fabrication was conducted from nitric acid bath containing both Sb³⁺ and SeO₂ species at ambient conditions. No underpotential deposition (UPD) of antimony and selenium onto ITO substrate was observed in the investigated systems indicating a weak precursor-substrate interaction. Deposition of antimony and selenium onto ITO substrate occurred with large overvoltage through 3D nucleation and growth mechanism followed by diffusion limited growth. FE-SEM and XRD results show that orthorhombic phase Sb₂Se₃ particles with their size between 90 and 125 nm were obtained and the atomic ratio for antimony and selenium was 2:2.63 according to the EDX results.     

［（SrTiO3）n/（SrTi0.8Nb0.2Ｏ3）m］20/LaAlO3超晶格的制备及其激光感生热电电压效应

采用脉冲激光沉积（PLD）镀膜技术在倾斜10°的LaAlO₃（100）单晶衬底上制备了（SrTiO₃）_n/（SrTi0.8Nb_0．2Ｏ₃）_m系列超晶格.在超晶格薄膜的XRD图谱中清楚地观察到周期调制的卫星峰结构.从卫星峰的分布计算了超周期,进而得到了在生长SrTiO₃和SrTi_0．8Nb_{0．2< 关键词： 3}）_n/（SrTi_0．8Nb_0．2Ｏ₃）_m］20/LAO（100）超晶格')" href="#">［（SrTiO₃）_n/（SrTi_0．8Nb_0．2Ｏ₃）_m］20/LAO（100）超晶格 激光感生热电电压 各项异性Seebeck系数 原子层热电堆     

Facile synthesis of Nb2O5 nanorod array films and their electrochemical properties

Nb₂O₅ nanorod array films were synthesized by a facile hydrothermal process using niobium metal foil and NH₄F as precursors. The Nb₂O₅ nanorods stand on the niobium metal foil substrate and are less than 100 nm in diameter and about 1 μm in length. X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM) characterizations indicate that these nanorods have orthorhombic structure and grew longitudinally along 〈0 0 1〉 direction. The nanorod growth mechanism was discussed. Thermal annealing at a temperature below 500 °C did not change the microstructure of nanorods but improve the crystallinity. The Nb₂O₅ nanorod array films have been tested as cathode material for lithium battery, which showed a good specific capacity up to 380 mAh g⁻¹ even after 50 charge/discharge cycles.     

Structural characterization of La0.9Ba0.1MnO3/Y-ZrO2 film by X-ray diffraction

Perovskite manganite La_0.9Ba_0.1MnO₃(LBMO) films were deposited on (0 0 1)-oriented single crystal yttria-stabilized zirconia (YSZ) substrate by 90° off-axis radio frequency magnetron sputtering. The film thickness ranged from 10 nm to 100 nm. Grazing incidence X-ray diffraction technique and high resolution X-ray diffraction were applied to characterize the structure of LBMO films. The LBMO film mainly consisted of (0 0 1)-orientated grain as well as weakly textured (1 1 0)-orientated grain. The results indicated that an amorphous layer with thickness of about 4 nm was formed at the LBMO/YSZ interface. The strain in LBMO film was small and averaged to be about -0.14%. The strain in the film was not lattice mismatch-induced strain but residual strain due to the difference in thermal expansion coefficient between film and substrate.     

Scanning tunneling microscopy study on a BC3 covered NbB2(0 0 0 1) surface

We have investigated a BC₃ covered NbB₂(0 0 0 1) surface using scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), and low energy electron diffraction (LEED). The STM images reveal characteristic features of a Moiré pattern reflecting an incommensurate relation of the BC₃ sheet with the substrate: bright protrusions with the periodicity of the substrate lattice are modulated in intensity with the periodicity of the BC₃ lattice. As a result, the surface exhibits nm-scale patchy regions with either the √3 × √3 or the 1 × 1 structure of the substrate. The two-dimensional Fourier transformation pattern of the STM image is consistent with the LEED pattern proving the epitaxial and incommensurate relationship between BC₃ surface sheet and substrate. No feature of a predicted superconducting gap was found in STS spectra measured at 5 K.     

Luminescence characteristics of Eu3+ activated borate phosphor for white light emitting diode

In this paper, the Sr₃Y₂ (BO₃)₄:Eu³⁺ phosphor was synthesized by high temperature solid-state reaction method and the luminescence characteristics were investigated. The emission spectrum exhibits one strong red emission at 613nm corresponding to the electric dipole ⁵D₀--⁷F₂ transition of Eu³⁺ under 365nm excitation, this is because Eu³⁺ substituted for Y³⁺ occupied the non-centrosymmetric position in the crystal structure of Sr₃Y₂ (BO₃)₄. The excitation spectrum indicates that the phosphor can be effectively excited by ultraviolet (254nm, 365nm and 400nm) and blue (470nm) light. The effect of Eu³⁺ concentration on the red emission of Sr₃Y₂ (BO₃)₄:Eu³⁺ was measured, the result shows that the emission intensities increase with increasing Eu³⁺ concentration, then decrease. The Commission Internationale del'Eclairage chromaticity (x, y) of Sr₃Y₂(BO₃)₄:Eu³⁺ phosphor is (0.640,0.355) at 15 mol% Eu³⁺.