芳胺常压气相N－烷基化反应研究

在固定床催化反应器中常压下研究了芳胺和醇的气相法Ｎ－烷基化反应。考察了γ－Ａｌ２Ｏ３系列催化剂的反应性能，筛选出了两种适用于苯胺Ｎ－甲基化反应且性能较好的催化剂。反应条件为：在甲醇和苯胺的摩尔比为３１时，反应温度为２８０℃，液时空速为０．３ｈ－１的条件下，苯胺转化率为９９％，生成Ｎ，Ｎ－二甲基苯胺（ＤＭＡ）的选择性为９２％。研究了甲醇和芳环上不同位置取代的甲基苯胺的反应规律，其转化率顺序：苯胺≈对一甲苯胺≈间－甲苯胺＞邻－甲苯胺。从Ｃ１到Ｃ４不同结构的醇和苯胺反应的规律研究，证明随醇中碳原子数目的增加，醇的反应活性降低，正构醇和苯胺反应和异构醇与苯胺反应随温度升高的变化趋势相反。     

5，6－二取代－3，4－二氢－2－吡啶酮的N－烷基化反应

由四个５，６－二取代－３，４－二氢－２－吡啶酮经烷基化反应合成了九个未见文献报道的Ｎ－取代５，６－二取代－３，４－二氢－２－吡啶酮，并确定了它们的结构。     

KF—Al2O3催化下N—烷基化糖精衍生物的合成

以ＫＦ－Ａｌ２Ｏ３为催化剂合成了８种Ｎ－烷基化糖精衍生物，将超声波辐射应用于该反应使反应时间明显缩短。     

无定形（磷酸氢－二苯基次膦酸）锆－氯化铁复合物催化烷基化反应

制得无定形（磷酸氢－二苯基次膦酸）锆－氯化铁复合物Ｚｒ（ＨＰＯ＿４）＿（１．５）［Ｏ＿２Ｐ（Ｃ＿６Ｈ＿５）＿２］·［ＦｅＣｌ＿２（ＯＨ）］．该复合物不易吸潮，不冒烟，在空气中稳定，对卤代烷与芳香烃在液相的烷基化反应有较好的催化活性；反应条件温和，产物收率高，操作方便，后处理简单，并可多次重复使用。     

芳胺常压气相N—烷基化反应研究

在固定床催化反应器中常压下研究了芳胺和醇的气相法Ｎ－烷基化反应。考察了γ－Ａｌ２Ｏ３系列催化剂的反应性能，筛选出了两种适用于苯胺Ｎ－甲基化反应且性能较好的催化剂。反应条件为：在甲醇和苯胺的摩尔比为３：１时，反应温度为２８０℃，液时空速为０．３ｈ＾－１的条件下，苯胺转化率为９９％，生成Ｎ，Ｎ－二甲基苯胺（ＤＭＡ）的选择性为９２％。研究了甲醇和芳环上不同位置取代的甲基苯胺的反应规律，其转化率顺序：苯胺     

微波作用下乙酰苯胺的N—烷基化反应

探讨了在微波照射下，用相转移催化剂进行了乙酰苯胺的Ｎ－烷基化反应，该反应速度快，产率令人满意。     

微波辐射促进N－烷基化邻硝基苯胺的合成

报道了微波辐射促进芳香氯与胺衍生物的亲核取代反应，应用这一新的有效合 成方法能以50％－99％的产率快速合成N－烷基化邻硝基苯胺构建单元。     

微波干法催化芳香醛与绕丹宁及N－苯基绕丹宁的缩合反应

利用微波辐射和固体碱性载体试剂催化绕丹宁及Ｎ－苯基绕丹宁和芳香醛的缩合反应合成了１４个绕丹宁衍生物并研究了影响反应的因素。     

微波辐射相转移催化制备高取代N-烷基化壳聚糖

微波辐射相转移催化制备高取代N-烷基化壳聚糖;壳聚糖;烷基化;微波辐射;相转移催化     

微波辐射下苯并噁唑基吡啶的合成

在微波辐射条件下,利用邻氨基酚和吡啶羧酸在多聚磷酸中的缩合反应,合成了2种苯并唑基取代吡啶 最佳反应条件为:450W辐射4min 相比于常规反应,反应时间大为缩短且产率令人满意     

2,4,6-三芳基吡啶的微波辐射促进合成

微波辐射;查尔酮;缩合反应;吡啶;叶立德     

New Synthesis Method of N-Alkylation of Carbazole Under Microwave Irradiation in Dry Media.

Under microwave irradiation carbazole reacts remarkably fast with a number of alkyl halides to give N-alkyl derivatives of carbazole. The reaction were carried out with high yield by simply mixing carbazole with an alkyl halide which was adsorb on potassium carbonate.     

One-step Beckmann Rearrangement from Ketones and Hydroxylamine in Dry Media under Microwave Irradiation

TheBeckInannrearrangement,theacid-mediatedisomerizationofoximestoamides,wasfirstdiscoveredinl886l.Asoneoftheoldestandmostfamiliartransformationsinorganicchemistry,ithasbeenwidelystudiedandagreatvarietyofmethodstoconductthistfansformationhavebeenreported'.However,mostofthesemethodswerecarriedoutbyusingalargeamountofsolventswithlongreactiontime.Whatismore,thepriorpreparationofthecorrespondingketoximesisusuallyrequired,whichmakestheseprocessesinconvenientandlessattractive.Bytakingadvantageofboth…     

N-烃基邻苯二甲酰亚胺的微波干法催化合成

在K2 CO3 固体碱催化下 ,利用微波辐射 ,邻苯二甲酰亚胺和卤代烃发生取代反应 ,高产率地合成了N -烃基邻苯二甲酰亚胺     

Preparation and Characterization of Quaternized Chitosan Under Microwave Irradiation

For the first time, N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC) was prepared through a fast, easy and efficient method with the assistance of microwave irradiation, and the quaternized chitosan was also degraded via the microwave irradiation. A comparative study was performed by using the conventional heating method to prepare HTCC. The structure and property of the quaternized chitosan obtained by these two methods were characterized by GPC, XRD, FTIR, NMR, TG and elemental analysis. It was shown that quaternized chitosan was successfully prepared within 50 min via microwave irradiation method, while a much longer time of 6–7 h was needed with the conventional heating method. The substitutions both occurred on the C2 position of chitosan with the two different methods, and their HTCC products had weight average similar molecular weight (Mw), structure and thermal stability. The HTCC prepared by the microwave irradiation method had a little lower degree of substitution (DS) than those prepared via conventional heating with the same mole ratio (6:1) of the intermediate to chitosan. The degradation study showed that the Mw of HTCC decreased rapidly from 4.6 × 10⁵ to 1.1 × 10⁵ in 1 h under microwave irradiation, while it only decreased from 4.6 × 10⁵ to 2.1 × 10⁵in 1 h through conventional heating degradation. These results revealed that microwave irradiation is a more efficient and environment-friendly way to obtain the water-soluble chitosan derivatives and their degraded products.     

Synthesis of Benzofuryl Substituted Unsymmetrical Ureas Under Microwave Irradiation

A series of 2-benzofuryl substituted unsymmetrical ureas were synthesized by reactions of benzofuroyl isocyanate, which was prepared from benzofuroyl azide by Curtius rearrangement, with various aromatic amines, 2-amino-5-(benzo-2-furyl)-1,3,4-thiadiazole, and 2-amino-5-aryloxymethylene-1,3, 4-thiadiazoles under microwave irradiation. Compared to conventional methods, this synthesis has the advantages of mild reaction conditions, easy handling, and high yields. The products have been characterized by analytical and spectral (IR and ¹ H NMR) data.     

微波促进碱性离子液体催化合成查尔酮

以4-氯-1-丁醇,N-甲基咪唑和苯甲酸钠为原料,用微波法制得碱性离子液体{[OHBMIM]Ph COO(AIL)},其结构经FT-IR表征;以苯甲醛和苯乙酮为原料,AIL为催化剂,经微波促进的缩合反应合成了查尔酮(1),其结构经1H NMR和FT-IR确证。考察了AIL用量、微波功率、物料比和反应时间对1产率的影响。合成1的最佳反应条件为:AIL 1 mmol,苯甲醛5 mmol,n(苯甲醛)∶n(苯乙酮)=1.1,于微波功率140 W反应5 min,产率95.8%。AIL具有较好的循环使用性,循环使用6次,1产率没有明显降低。     

微波干法催化醛酮与胺的缩合反应

利用微波辐射和固体中性Al2 O3 载体催化醛酮与胺的缩合反应的方法合成了十六种亚胺 ,研究了微波功率、作用时间、产物提取方式等因素对反应的影响 ;与无微波作用的一般合成方法相比 ,该法明显地提高反应速度及产率 ;文中用低极性熔点递变物质灌装毛细管的方法观测微波作用下反应温度 ,探讨微波作用化学反应的机理 ,其机理除与微波加热作用有关外还与分子间氢键及分子的缔合性有关。