Surface-grafted block copolymer brushes with continuous composition gradients of poly(poly(ethylene glycol)-monomethacrylate) and poly(N-isopropylacrylamide)

Surface-grafted block copolymer brushes with continuous composition gradients containing poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) and poly(N-isopropylacrylamide) (PNIPAAm) chains were fabricated by integration of the surface-initiated atom transfer radical polymerization (SI-ATRP) and continuous injection method.Three types of copolymer gradients were prepared: (1) a uniform P(PEGMA) layer was block copolymerized with a gradient PNIPAAm layer (PP1);(2) a gradient P(PEGMA) layer was block copo...     

Patterned poly(N-isopropylacrylamide) brushes on silica surfaces by microcontact printing followed by surface-initiated polymerization

Patterned poly(N-isopropylacrylamide) (PNIPAAm) brushes were fabricated on oxidized silicon wafers by surface-initiated atom transfer radical polymerization of N-isopropylacrylamide from a micropatterned initiator. The patterned surface initiator was prepared by microcontact-printing octadecyltrichlorosilane and backfilling with 3-(aminopropyl)triethoxysilane followed by amidization with 2-bromo-2-methylpropionic acid. XPS and FTIR confirmed the chemical structure of the surface initiator and the PNIPAAm brushes. Surface analysis techniques, including ellipsometry, contact angle goniometry, and X-ray reflectometry (XRR), were used to characterize the thickness, roughness, hydrophilicity, and density of the polymer brushes. Tapping-mode AFM imaging confirmed the successful patterning of the PNIPAAm brushes on the oxidized silicon substrates. Variable temperature ellipsometry indicated that the lower critical solution temperature of the hydrated PNIPAAm brush was broad, occurring over the range of 20-35 degrees C. A solvatochromic fluorophore, 6-propionyl-2-dimethylaminonaphthalene (Prodan), in the PNIPAAm brush layers yielded a very similar emission to that in DMF, which can be attributed to the similarity of their chemical structures. Fluorescence microscopy further proved the successful patterning of the polymer brushes and suggested that the Prodan is localized in the patterned PNIPAAm brushes and excluded from the surrounding octadecyltrichlorosilane regions.     

Control of surface properties using fluorinated polymer brushes produced by surface-initiated controlled radical polymerization

Surface-grafted styrene-based homopolymer and diblock copolymer brushes bearing semifluorinated alkyl side groups were synthesized by nitroxide-mediated controlled radical polymerization on planar silicon oxide surfaces. The polymer brushes were characterized by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS), and time-dependent water contact angle measurements. Angle-resolved XPS studies and water contact angle measurements showed that, in the case of the diblock copolymer brushes, the second block to be added was always exposed at the polymer-air interface regardless of its surface energy. Values of z*/Rg were estimated based on the radius of gyration, Rg, of the grafted homopolymer or block copolymer chains for the grafted brushes and thickness of the brush, z*. The fact that z*/Rg > 1 suggests that all these brushes are stretched. These results support the idea that after grafting the first block onto the surface the nitroxide-end capped polymer chains were able to polymerize the second block in a "living" fashion and the stretched brush so formed was dense enough that the outermost block in all cases completely covers the surface. NEXAFS analysis showed a relationship between the surface orientation of the fluorinated side chains and brush thickness with thicker brushes having more oriented side chains. Time-dependent water contact angle measurements revealed that the orientation of the side chains of the brush improved the surface stability toward reconstruction upon prolonged exposure to water.     

Synthesis of copolymer brushes endowed with adhesion to stainless steel surfaces and antibacterial properties by controlled nitroxide-mediated radical polymerization

Novel copolymer brushes have been synthesized by a two-step "grafting from" method that consists of the electrografting of poly(2-phenyl-2-(2,2,6,6-tetramethyl-piperidin-1-yloxy)-ethylacrylate) onto stainless steel, followed by the nitroxide-mediated radical polymerization of 2-(dimethylamino ethyl)acrylate and styrene or n-butyl acrylate, initiated from the electrografted polyacrylate chains. The grafted copolymers were quaternized in order to endow them with antibacterial properties. Peeling tests have confirmed the strong adhesion of the grafted copolymer onto the stainless steel substrate. Quartz crystal microbalance experiments have proven that fibrinogen adhesion is lower on the hydrophilic quaternized films compared to the nonionic counterpart. Such quaternized copolymers exhibit significant antibacterial activity against the Gram-positive bacteria S. aureus and the Gram-negative bacteria E. coli.     

Grafting acrylic polymers from flat nickel and copper surfaces by surface-initiated atom transfer radical polymerization

Acrylic polymers, including poly(methyl methacrylate), poly(2,2,2-trifluoroethyl methacrylate), poly( N,N'-dimethyaminoethyl methacrylate), and poly(2-hydroxyethyl methacrylate) were grafted from flat nickel and copper surfaces through surface-initiated atom transfer radical polymerization (ATRP). For the nickel system, there was a linear relationship between polymer layer thickness and monomer conversion or molecular weight of "free" polymers. The thickness of the polymer brush films was greater than 80 nm after 6 h of reaction time. The grafting density was estimated to be 0.40 chains/nm2. The "living" chain ends of grafted polymers were still active and initiated the growth of a second block of polymer. Block copolymer brushes with different block sequences were successfully prepared. The experimental surface chemical compositions as measured by X-ray photoelectron spectroscopy agreed very well with their theoretical values. Water contact angle measurements further confirmed the successful grafting of polymers from nickel and copper surfaces. The surface morphologies of all samples were studied by atomic force microscopy. This study provided a novel approach to prepare stable functional polymer coatings on reactive metal surfaces.     

Controlled grafting of comb copolymer brushes on poly(tetrafluoroethylene) films by surface-initiated living radical polymerizations

Surface modification of poly(tetrafluoroethylene) (PTFE) films by well-defined comb copolymer brushes was carried out. Peroxide initiators were generated directly on the PTFE film surface via radio frequency Ar plasma pretreatment, followed by air exposure. Poly(glycidyl methacrylate) (PGMA) brushes were first prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization from the peroxide initiators on the PTFE surface in the presence of a chain transfer agent. Kinetics study revealed a linear increase in the graft concentration of PGMA with the reaction time, indicating that the chain growth from the surface was consistent with a "controlled" or "living" process. alpha-Bromoester moieties were attached to the grafted PGMA by reaction of the epoxide groups with 2-bromo-2-methylpropionic acid. The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of two hydrophilic vinyl monomers, including poly(ethylene glycol) methyl ether methacrylate and sodium salt of 4-styrenesulfonic acid. The chemical composition of the modified PTFE surfaces was characterized by X-ray photoelectron spectroscopy.     

SYNTHESIS AND CHARACTERIZATION OF WELL-DEFINED BLOCK COPOLYMERS CONTAINING PENDANT, SELF-COMPLEMENTARY QUADRUPLE HYDROGEN BONDING SITES

The title block copolymer (defined as PSUEA) containing pendant,self-complementary quadruple hydrogen bonding sites has been prepared successfully by three steps.First,poly(styrene-b-2-hydroxyethyl acrylate) (defined as PSHEA) was prepared by living radical polymerizing 2-hydroxyethyl acrylate (HEA) initiated by polystyrene (PSt) macro- initiator,which was prepared via nitroxide-mediated polymerization (NMP) technique.After treated by excessive 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate (IPD...     

Covalent immobilization of antibody fragments on well-defined polymer brushes via site-directed method

Well-defined polymer brushes and block copolymer brushes consisting of 2-methacryloyloxyethyl phosphorylcholine (MPC) and glycidyl methacrylate (GMA) were prepared by surface-initiated atom transfer radical polymerization (ATRP). The polymer brushes were used for the immobilization of antibody fragments in a defined orientation. Pyridyl disulfide moieties were introduced to the polymer brushes via a reaction of epoxy groups in GMA units. Fab’ fragments were then immobilized onto these surfaces via a thiol-disulfide interchange reaction and the reactivity of antibodies with antigens was investigated. Antigen/antibody binding on the polymer brushes was more preferable than that on epoxysilane films as a control surface. Furthermore, the activity of the antibodies immobilized on the block copolymer brushes having biocompatible PMPC was greater than that on other surfaces that did not have PMPC in their structures.     

Thermo- and pH-responsive polypropylene microporous membrane prepared by the photoinduced RAFT-mediated graft copolymerization

Thermo- and pH-responsive polypropylene microporous membrane prepared by photoinduced reversible addition–fragmentation chain transfer (RAFT) graft copolymerization of acrylic acid and N-isopropyl acrylamide by using dibenzyltrithiocarbonate as a RAFT agent. Attenuated total reflection-Fourier transform infrared spectroscopy (ATR/FT-IR), X-ray photoelectron spectroscopy (XPS) and field emission scanning electron microscopy (FE-SEM) were used to characterize the structural and morphological changes on the membrane surface. Results of ATR/FT-IR and XPS clearly indicated that poly(acrylic acid) (PAAc) and poly(N-isopropyl acrylamide) (PNIPAAm) were successfully grafted onto the membrane surface. The grafting chain length of PAAc on the membrane surface increased with the increase of UV irradiation time, and decreased with the increase of the concentration of chain transfer agent. The PAAc grafted membranes containing macro-chain transfer agents, or the living membrane surfaces were further functionalized via surface-initiated block copolymerization with N-isopropyl acrylamide in the presence of free radical initiator, 2,2′-azobisisobutyronitrile. It was found that PNIPAAm can be grafted onto the PAAc grafted membrane surface. The results demonstrated that polymerization of AAc and NIPAAm by the RAFT method could be accomplished under UV irradiation and the process possessing the living character. The PPMMs with PAAc and PNIPAAm grafting chains exhibited both pH- and temperature-dependent permeability to aqueous media.     

Synthesis,thermo-responsive micellization and caffeine drug release of novel PBMA-<Emphasis Type="Italic">b</Emphasis>-PNIPAAm block polymer brushes

Brush-like block copolymers with poly(t-butyl methacrylate) (PBMA) and poly(N-isopropylacrylamide) (PNIPAAm) as side arms, PBMA-b-PNIPAAm, were designed and synthesized via a simple free radical polymerization route. The chemical structure and molecular weight of these polymer brushes were characterized and determined by nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectrometry (FTIR) and gel permeation chromatography (GPC). The micellar formation by these polymer brushes in aqueous solutions were detected by a surface tension technique, and the critical micelle concentration (CMC) ranged from 1.53 to 8.06 mg L⁻¹. The morphology and geometry of polymer micelles were investigated by transmission electron microscope (TEM) and dynamic light scattering (DLS). The polymer micelles assume the regularly-spherical core-shell structure with well-dispersed individual nanoparticles, and the particle size was in the range from 36 to 93 nm. The PNIPAAm segments exhibited a thermoreversible phase transition, so the resulting block polymer brushes were temperature-sensitive and the low critical solution temperature (LCST) was determined by UV-vis spectrometer at about 28.82–29.40°C. The characteristic parameters of the polymer micelles such as CMC, micellar size and LCST values were affected by their compositional ratios and the length of hydrophilic or hydrophobic chains. The evaluation for caffeine drug release behavior of the block polymer micelles demonstrated that the self-assembled micelles exhibited thermal-triggered properties in controlled drug release.     

Motion of integrated CdS nanoparticles by phase separation of block copolymer brushes

A new method of reversibly moving CdS nanoparticles in the perpendicular direction was developed on the basis of the phase separation of block copolymer brushes. Polystyrene-b-(poly(methyl methacrylate)-co-poly(cadmium dimethacrylate)) (PS-b-(PMMA-co-PCdMA)) brushes were grafted from the silicon wafer by surface-initiated atom transfer radical polymerization (ATRP). By exposing the polymer brushes to H2S gas, PS-b-(PMMA-co-PCdMA) brushes were converted to polystyrene-b-(poly(methyl methacrylate)-co-poly(methacrylic acid)(CdS)) (PS-b-(PMMA-co-PMAA(CdS))) brushes, in which CdS nanoparticles were chemically bonded by the carboxylic groups of PMAA segment. Alternating treatment of the PS-b-(PMMA-co-PMAA(CdS)) brushes by selective solvents for the outer block (a mixed solvent of acetone and ethanol) and the inner PS block (toluene) induced perpendicular phase separation of polymer brushes, which resulted in the reversible lifting and lowering of CdS nanoparticles in the perpendicular direction. The extent of movement can be adjusted by the relative thickness of two blocks of the polymer brushes.     

Reversible electrochemical switching of polymer brushes grafted onto conducting polymer films

We demonstrate the electrochemical switching of conformation of surface-bound polymer brushes, by grafting environmentally sensitive polymer brushes from an electrochemically active conducting polymer (ECP). Using atom transfer radical polymerization (ATRP), we grafted zwitterionic betaine homopolymer and block copolymer brushes of poly(3-(methacryloylamido)propyl)-N,N'-dimethyl(3-sulfopropyl)ammonium hydroxide) (PMPDSAH) and poly(methyl methacrylate)-b-PMPDSAH, from an initiator, surface-coupled to a poly(pyrrole-co-pyrrolyl butyric acid) film. The changes in ionic solution composition in the surface layer, resulting from oxidation and reduction of the ECP, trigger a switch in conformation of the surface-bound polymer brushes, demonstrated here by electrochemical impedance spectroscopy (EIS) and in a change of wettability. The switch is dependent upon temperature in a way that is analogous to the temperature-dependent solubility and aggregation of similar betaine polymers in aqueous solution but has a quite different dependence on salt concentration in solution. The switch is fully reversible and reproducible. We interpret the switching behavior in terms of a transition to a "supercollapsed" state on the surface that is controlled by ions that balance the charge state of the ECP and are adsorbed to the opposite charges of the zwitterionic graft, close to the graft-ECP interface. The behavior is significantly modified by hydrophobic interactions of the block copolymer graft. We speculate that the synergistic combination of properties embodied in these "smart" materials may find applications in electrochemical control of surface wetting and in the interaction with biomolecules and living cells.     

Novel interpenetrating smart polymer networks grafted onto polypropylene by gamma radiation for loading and delivery of vancomycin

Gamma radiation was used in every step of the synthesis of a sequential interpenetrating polymer network made of two “smart” polymers: poly(acrylic acid) (PAAc) and poly (N-isopropylacrylamide) (PNIPAAm), the latter grafted onto polypropylene (PP) films (PP-g-PNIPAAm) with the aim of developing medicated coatings for medical devices. Three steps were followed for obtaining net-PP-g-PNIPAAm-inter-net-PAAc: graft copolymerization of PNIPAAm onto PP films by gamma pre-irradiation oxidative method, cross-linking of PP-g-PNIPAAm by gamma irradiation in water to form the first network, with or without N,N′-methylenebis(acrylamide) (MBAAm), and finally the formation of the second network through the polymerization and cross-linking of AAc inside cross-linked PP-g-PNIPAAm by a low gamma radiation dose of 2.5 kGy. The films were characterized regarding the amount of grafted polymers and their composition (FTIR-ATR), thermal behavior (DSC), temperature- and pH-responsive swelling and contact angle (critical pH 6 and lower critical solution temperature ∼33 °C), and loading and release rate of vancomycin. Drug loading was driven by specific interactions between vancomycin and PAAc. Drug-loaded films sustained the delivery for several hours at pH 7.4 and provided release rate values adequate for killing bacteria attempting to adhere the surface of the films.     

Mesoscale simulations of the behavior of charged polymer brushes under normal compression and lateral shear forces

Dissipative particle dynamics (DPD) was used to investigate the behavior of two opposing end-grafted charged polymer brushes in aqueous media under normal compression and lateral shear. The effect of polymer molecular weight, degree of ionization, grafting density, ionic strength, and compression on the polymer conformation and the resulting shear force between the opposing polymer layers were investigated. The simulations were carried out for the poly(tert-butyl methacrylate)-block-poly(sodium sulfonate glycidyl methacrylate) copolymer, referred as PtBMA-b-PGMAS, end-attached to a hydrophobic surface for comparison with previous experimental data. Mutual interpenetration of the opposing end-grafted chains upon compression is negligible for highly charged polymer brushes for compression ratios ranging from 2.5 to 0.25. Under electrostatic screening effects or for weakly charged polymer brushes, a significant mutual interpenetration was measured. The variation of interpenetration thickness with separation distance, grafting density, and polymer size follows the same scaling law as the one observed for two opposing grafted neutral brushes in good solvent. However, compression between two opposing charged brushes results in less interpenetration relative to neutral brushes when considering equivalent grafting density and molecular weight. The friction coefficient between two opposing polymer-coated surfaces sliding past each other is shown to be directly correlated with the interpenetration thickness and more specifically to the number of polymer segments within the interpenetration layer.     

Rapid growth of polymer brushes from immobilized initiators

This report describes the remarkably rapid synthesis of polymer brushes under mild conditions (50 degrees C) using surface-initiated polymerization. The highly active atom transfer radical polymerization catalyst Cu(I)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane allows synthesis of 100 nm thick poly(tert-butyl acrylate) brushes from initiator-modified Au surfaces in just 5 min. Using the same catalyst, polymerization of 2-hydroxyethyl methacrylate and methyl methacrylate yielded 100 nm thick films in 10 and 60 min, respectively. Such growth rates are an order of magnitude greater than those for traditional free-radical polymerizations initiated from surfaces. These polymerizations also retain some features of controlled radical polymerizations, such as the ability to form block copolymer brushes.     

Synthesis of Vinyl Polymer—Poly (α-Amino Acid) Block Copolymers by End-Reactive Oligomers

In order to synthesize block copolymers consisting of segments having dissimilar properties, vinyl polymer - poly (α-amino acid) block copolymers were synthesized by two different methods. In the first method, the terminal amino groups of polysarcosine, poly(γ-benzyl L-glutamate), and poly(γ-benzyloxycarbonyl-L-lysine) were haloacetylated. The mixture of the terminally haloacetylated poly (α-amino acid) and styrene or methyl methacrylate was photoirradiated in the presence of Mo (CO)₆ or heated with Mo(CO)₆, yielding A-B-A-type block copolymers consisting of poly(α-amino cid) (the A component) and vinyl polymer(the B component). The characterization of block copolymers revealed that the thermally initiated polymerization of vinyl compounds by the trichloroacetyl poly(α-amino acid)/Mo(CO)₆ system was most suitable for the synthesis of vinyl polymer - poly-(α-amino acid) block copolymers. In the second method, poly (methyl methacrylate) and polystyrene having a terminal amino group were synthesized by the radical polymerization in the presence of 2-mercaptoethylammonium chloride. Using these polymers having a terminal amino group as an initiator, the block polymerizations of γ-benzyl L-glutamate NCA and e-benzyloxycarbonyl-L-lysine NCA were carried out, yielding A-B-type block copolymer. By eliminating the protecting groups of the side chains of poly(α-amino acid) segment, block copolymers such as poly(methyl methacrylate) with poly(L-glutamic acid) or poly(L-lysine) and polystyrene with poly(L-glutamic acid) and poly(L-lysine) were successfully synthesized.     

Preparation of End Grafted Polyacrylonitrile Brushes through Surface Confined Radical Chain Transfer Reaction

End grafted polyacrylonitrile (PAN) brush was prepared through surface initiated polymerization via the chain transfer process.The thiol-terminated monolayer and PAN brushes were characterized by FTIR,X-ray photoelectron spectroscopy(XPS),atomic force microscopy (AFM),ellipsometry and contact angle measurements etc.It is demonstrated that radical chain transfer reaction and surface initiated precipitate polymerization can used to prepare end-grafted polymer brushes.     

Polymer Brushes on Planar TiO2 Substrates

A facile and universal method is presented for the preparation of polymer brushes on amorphous TiO₂ film. Homogeneous and stable poly(methyl methacrylate), polystyrene, poly(4‐vinylpyridine), and poly(N‐vinyl imidazole) (PNVI) brushes up to 550 nm are directly created onto TiO₂ via UV‐induced photopolymerization of corresponding monomers. Kinetic studies reveal a linear increase in thickness with the polymerization time. Characterization of the resulting polymer brushes by FTIR spectroscopy, X‐ray photoelectron spectroscopy, contact angle, and atomic force microscopy (AFM) indicates an efficient UV‐grafting reaction. Finally, we have demonstrated the possibility in converting the PNVI brushes to poly(vinyl imidazolium bromide), i.e., poly(ionic liquid) brushes by polymer–analogous reactions.

     

Novel approach for metallic surface-initiated atom transfer radical polymerization using electrografted initiators based on aryl diazonium salts

This paper reports on the preparation of poly(methyl methacrylate) (PMMA), poly(n-butyl acrylate) (PBA), and polystyrene (PS) brushes at the surface of conducting materials that were modified by the electrochemical reduction of a brominated aryl diazonium salt BF4-, +N2-C6H4-CH(CH3)-Br (D1). The grafted organic species -C6H4-CH(CH3)-Br was found to be very effective in initiating atom transfer radical polymerization (ATRP) of vinyl monomers. This novel approach combining diazonium salts and ATRP allowed PMMA, PBA, and PS brushes to be grown from the surface of iron electrodes. The polymer films were characterized in terms of their chemical structure by infrared reflection absorption spectroscopy and X-ray photoelectron spectroscopy. Atomic force microscopy studies indicated that the polymer brushes are densely packed. Contact angle measurements of water drops on PS and PMMA brushes were 88.1 +/- 2.0 and 70.3 +/- 2.1 degrees, respectively, which is consistent with the published wettability data for the corresponding polymer sheets.     

Rapid polymer brush growth by TEMPO-mediated controlled free-radical polymerization from swollen plasma deposited poly(maleic anhydride) initiator surfaces

Pulsed plasma-chemical deposition of poly(maleic anhydride) is shown to be a substrate-independent method for functionalizing solid surfaces with initiator sites for nitroxide-mediated controlled free-radical graft polymerization. Swelling of the initiator film via aminolysis can lead to grafted polymer brushes that are 1 order of magnitude thicker than those obtained by existing methods on solid surfaces.