Electrocatalytic carboxylation of benzyl chlorides at silver cathodes in acetonitrile

Silver exhibits powerful electrocatalytic activities towards the reductive carboxylation of benzyl chlorides (RCl): in CO2-saturated CH3CN, reduction of RCl occurs at potentials that are about 0.6 V more positive than those of the same process at Hg or carbon electrodes and gives carboxylic acids in good to excellent yields.     

Electrocatalytic Carboxylation of Arylic Bromides at Silver Cathode in the Presence of Carbon Dioxide

A simple and efficient electrocatalytic carboxylation of arylic bromides has been developed using silver as cathode and magnesium as anode in N,N-dimethylformamide (DMF) under mild conditions. The influences of some key factors (such as the nature of cathode material, current density, and temperature) on this reaction were investigated. The investigations were extended to other arylic bromides under the optimized conditions, and the corresponding carboxylic acids were obtained in moderate to good yields (30–78%). The electrochemical behavior was studied at different electrodes (Ag, Cu, Ni, and Ti) by cyclic voltammetry, which showed significant electrocatalytic effect of the silver electrode toward the reductive carboxylation of arylic bromides.      

Electrocatalytic oxidation of aliphatic diols on platinum and gold Part I: Effects of chain length and isomeric position

The electrochemical reactivity of propanediol, butanediol, pentanediol, hexanediol and heptanediol, on polycrystalline platinum and gold electrodes, was studied in acid and alkaline media. The effect of the number of carbon atoms, i.e. the chain length, was observed. The apparent energies of activation were evaluated systematically and discussed in relation to the molecular structure of the different diols. In the case of the butanediol isomers, an effect of the alcohol group positions on the activation energy and reaction mechanisms was clearly shown.     

RuO_2/TiO_2纳米薄膜的新构建及对CO_2的电催化还原

在旋涂有球状纳米TiO2薄膜的导电玻璃(ITO)基底上采用循环伏安法(CV)电沉积RuO2作为电催化还原CO2的阴极.采用场发射扫描电子显微镜(FE-SEM)表征了RuO2/TiO2纳米薄膜的形貌,并应用近稳态电位扫描法和计时电流法(i～t)研究了薄膜的电催化CO2性能.结果表明所构建的RuO2/TiO2薄膜中纳米粒子大小均匀、排列致密,且较传统热分解法所得催化剂有更好的电催化性能.     

Cu2O/Cs2CO3/DMF: An efficient catalytic system for N-arylation of imidazole with aryl halides under ligand-free conditions

A ligand-free Cu-catalyzed protocol for the Ullmann-type N-arylation of N-containing heterocycles with aryl or heteroaryl iodides and bromides has been established. A broad range of functional groups is well tolerated on both of the cross-coupling partners, producing the desired products in good to excellent yields.     

Loss of characteristic absorption bands of C60 conjugation systems in the addition with aliphatic amines

The characteristic absorption bands disappear and the shortest band at approximately 244 nm in cyclohexane or 282 nm in toluene remained only with long smoothing tail as C60 reacts adequately with aliphatic amines under sunlight radiation at approximately 40 degrees C. Simultaneously, fluorescence emission shifts from a weak band initially at longer wavelength to another strong one finally at shorter wavelength. The results might imply that the pi-conjugation system of C60 parent molecule is isolated into smaller separated parts. Therefore, some possible isolation models associated with observed experimental results are designed under some reasonable assumptive conditions.     

Metal–Organic Frameworks for Electrocatalytic Sensing of Hydrogen Peroxide

The electrochemical detection of hydrogen peroxide (H₂O₂) has become more and more important in industrial production, daily life, biological process, green energy chemistry, and other fields (especially for the detection of low concentration of H₂O_2). Metal organic frameworks (MOFs) are promising candidates to replace the established H₂O₂ sensors based on precious metals or enzymes. This review summarizes recent advances in MOF-based H₂O₂ electrochemical sensors, including conductive MOFs, MOFs with chemical modifications, MOFs-composites, and MOF derivatives. Finally, the challenges and prospects for the optimization and design of H₂O₂ electrochemical sensors with ultra-low detection limit and long-life are presented.     

红外光谱电化学研究金电极表面上CO2的还原

以碳酸丙烯酯(PrC)为溶剂,高氯酸四丁基胺(TBAP)为电解质,利用电化学及红外光谱电化学开展了金电极上二氧化碳的还原研究。运用现场红外光谱跟踪电化学还原过程反应物及产物的生成和消失。红外光谱电化学循环伏吸法表明,在消耗CO2的同时,金电极上有CO的产生,且伴随有碳酸根的形成。结合电化学和光谱电化学结果,提出了一种电还原机理:在非水介质中,CO2电还原过程中生成了中间体CO2.-,随后CO2.-分别以两个途径进行还原,其一是直接被还原成CO,其二是与CO2结合生成C2O4.-而后歧化成CO以及CO32-。两个反应同时进行,且第一个反应是可逆过程。     

Synthesis and characterization of phosphate-modified LiMn2O4 cathode materials for Li-ion battery

<正>LiMn_2O_4 spinel cathode materials were modified with 2 wt.%Li-M-PO_4(M=Co,Ni,Mn) by polyol synthesis method.The phosphate surface-modified LiMn_2O_4 cathode materials were physically characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDS).The charge-discharge test showed that the cycling and rate capacities of LiMn_2O_4 cathode materials were significantly enhanced by stabilizing the electrode surface with phosphate.     

Surface fluorination of the cathode active materials for lithium secondary battery

LiMn₂O₄ was treated with F₂ at room temperature (RT), 373 and 473 K under 1.3, 6.6 and 13.2 kPa-F₂. XPS data indicate that two kinds of fluorine species may exist on the sample surface and the ratio of these fluorines is affected by choosing the reaction condition. The peak indicating Mnⁿ⁺ bonded to fluorine appeared in the XPS spectra of Mn2p3/2 electron. From the results of the charge/discharge measurements, the efficiency of charge/discharge process for the sample fluorinated under 1.3, 6.6 and 13.2 kPa-F₂ below 373 K was larger than that of untreated one. The discharge capacity of the fluorinated sample was also larger than that of untreated one. The discharge capacity, the loss of discharge capacity during 50 charge/discharge cycles, F/O ratio measured from XPS data and the intensity of the peak indicating Mnⁿ⁺ bonded to fluorine in the XPS spectra were closely related to each other. The optimal fluorination condition was under 1.3 kPa-F₂ at RT for 1 h.     

LiMn2O4 nanorods as a super-fast cathode material for aqueous rechargeable lithium batteries

LiMn₂O₄ nanorods were prepared by a facile hydrothermal method in combination with traditional solid-state reactions and characterized by X-ray diffraction analysis. Their electrochemical behavior was tested by cyclic voltammetry and repeated charge/discharge cycling. Results show that the reversible intercalation/deintercalation of Li-ions into/from LiMn₂O₄ cathode can yield up to 110 mAh/g at 4.5 C, and still retains 88% at the very large charge rate of 90 C with well-defined charge and discharge plateaus. It presents very high power density, up to 14.5 kW/kg, and very excellent cycling behavior, 94% capacity retention after 1200 cycles. It is thus a competitor for LiFePO₄.     

Halogen displacement chemistry with silver and alkali metal salts: Preparation of SF5-esters, alcohols, aliphatic olefins, acids and an iodide

It has been found that treatment of SF₅-alkyl halides, especially SF₅(CH₂)₂Br, with silver salts such as CH₃C(O)OAg, p-CH₃C₆H₄SO₃Ag, CF₃SO₃Ag and AgNO₃ provides convenient pathways for preparing the following ester compounds: SF₅CH₂CH₂R (R = CH₃COO, TosO, CF₃SO₃, NO₃), SF₅(CH₂)₃OTos, and SF₅(CF₂)₄(CH₂)₂OAc. Important derivatives prepared from these esters include SF₅(CH₂)₂OH; SF₅(CF₂)₄(CH₂)₂OH. Several alkenes SF₅C(Br)CH₂ and SF₅CH₂(COOCH₃)CCHC(O)OCH₃ are obtained using silver salts. The use of alkali metals salts with SF₅(CH₂)₃Br is studied and yields SF₅(CH₂)₃I; also, a pathway has been developed that extends for SF₅(CH₂)₃₋ the chain by two-carbon atoms and also produces the first SF₅-containing malonic acid.     

葡萄糖在Ti/NanoTiO2-ZrO2修饰电极上电催化氧化

在无水乙醇和乙酰丙酮混合溶液中,电解Ti金属制得前驱体Ti(OCH2CH3)4-y(acac)y,再加入ZrCl4,将上述溶液直接水解、干燥后,在450℃煅烧2 h,粉体通过X射线衍射(XRD)分析表明:纳米TiO2-ZrO2粉体呈单分散结构。扫描电子显微镜(SEM)测试表明,颗粒平均尺寸为30~40 nm。通过溶胶-凝胶法制得高活性的Ti/NanoTiO2-ZrO2修饰电极,采用循环伏安研究发现,Ti/NanoTiO2-ZrO2电极对葡萄糖氧化具有高催化活性。在NaBr电解液中,Br-在Ti/NanoTiO2-ZrO2电极表面氧化为Br2,Br2间接电氧化葡萄糖。     

DAB-Cy as an inexpensive and effective ligand for palladium-catalyzed homocoupling reaction of aryl halides

A novel catalytic system of PdCl₂(CH₃CN)₂ with N,N′-dicyclohexyl-1,4-diazabutadiene (DAB-Cy) ligand was successfully used in reductive coupling of aryl halides.     

Synthesis and electrochemical properties of LiNi0.9-xCo0.1SnxO2 as cathode materials for lithium secondary batteries

LiNi_0.9-x Co_0.1Sn _x O₂ (x = 0.00, 0.02, and 0.03) were synthesized via the rheological phase reaction method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical tests. The sample of LiNi_0.9-x Co_0.1Sn _x O₂ (x = 0.02) not only shows good cycle performance but also exhibits an excellent discharge capacity of 188 mAh/g in the first cycle at a current density of 100 mA/g in the voltage range of 3.0–4.3 V. The tin doping results in reducing the resistance and increasing conductivity of LiNi_0.9-x Co_0.1Sn _x O₂. This composite oxide is promising as cathode material for lithium-ion battery.     

Trends on CO2 Capture with Microalgae: A Bibliometric Analysis

The alarming levels of carbon dioxide (CO₂) are an environmental problem that affects the economic growth of the world. CO₂ emissions represent penalties and restrictions due to the high carbon footprint. Therefore, sustainable strategies are required to reduce the negative impact that occurs. Among the potential systems for CO₂ capture are microalgae. These are defined as photosynthetic microorganisms that use CO₂ and sunlight to obtain oxygen (O₂) and generate value-added products such as biofuels, among others. Despite the advantages that microalgae may present, there are still technical–economic challenges that limit industrial-scale commercialization and the use of biomass in the production of added-value compounds. Therefore, this study reviews the current state of research on CO₂ capture with microalgae, for which bibliometric analysis was used to establish the trends of the subject in terms of scientometric parameters. Technological advances in the use of microalgal biomass were also identified. Additionally, it was possible to establish the different cooperation networks between countries, which showed interactions in the search to reduce CO₂ concentrations through microalgae.     

聚多巴胺功能化的四氧化三钴纳米复合材料的制备及电催化性能

通过简单的自聚合反应在四氧化三钴表面包覆聚多巴胺膜,联合使用纳米铂和辣根过氧化物酶用于电催化还原过氧化氢。结果表明,聚多巴胺的使用增强后续纳米铂的负载量和辣根过氧化物酶的生物活性;四氧化三钴、纳米铂和辣根过氧化物酶的多重信号放大作用,大大增强了该复合材料的催化活性,提高了过氧化氢传感器的灵敏度。优化实验条件下,传感器对过氧化氢的检测范围为0.1~700 μmol·L^-1,检测限为0.08 μmol·L^-1。     

ZIF-67/CeO2催化CO2和甲醇直接合成碳酸二甲酯

采用沉淀法将ZIF-67负载到CeO₂上,制备了具有多重活性位点的非均相催化剂ZIF-67/CeO₂,并研究其催化CO₂和甲醇直接反应生成碳酸二甲酯(DMC)的性能。采用 X 射线衍射、N2吸附-脱附、傅里叶变换红外光谱和 X 射线光电子能谱研究了ZIF-67/CeO₂的各种理化性质。结果表明,ZIF-67的引入使ZIF-67/CeO₂催化剂产生更多的氧空位。在考察的ZIF-67/CeO₂系列催化剂中,0.3-ZIF-67/CeO₂(0.3为Co、Ce物质的量之比)在具有高的比表面积的同时还能保持介孔结构,具有丰富的酸碱位点,并且具有较高的CO₂吸附容量,表现出最好的催化性能。在反应温度为140℃、压力为4.5 MPa的条件下反应4 h,DMC收率可达到3.79 mmol_DMC·gcat^-1。     

ZIF-67/CeO2催化CO2和甲醇直接合成碳酸二甲酯

采用沉淀法将ZIF-67负载到CeO₂上,制备了具有多重活性位点的非均相催化剂ZIF-67/CeO₂,并研究其催化CO₂和甲醇直接反应生成碳酸二甲酯(DMC)的性能。采用X射线衍射、N₂吸附-脱附、傅里叶变换红外光谱和X射线光电子能谱研究了ZIF-67/CeO₂的各种理化性质。结果表明,ZIF-67的引入使ZIF-67/CeO₂催化剂产生更多的氧空位。在考察的ZIF-67/CeO₂系列催化剂中,0.3-ZIF-67/CeO₂(0.3为Co、Ce物质的量之比)在具有高的比表面积的同时还能保持介孔结构,具有丰富的酸碱位点,并且具有较高的CO₂吸附容量,表现出最好的催化性能。在反应温度为140℃、压力为4.5 MPa的条件下反应4 h,DMC收率可达到3.79 mmol_DMC·g_cat^-1。     

An intermediate neglect of differential overlap (INDO) technique for lanthanide complexes: studies on lanthanide halides

An intermediate neglect of differential overlap method of use for examining the electronic structure of lanthanide complexes is developed. It is characterized by a basis set obtained from relativistic Dirac-Fock atomic calculations, the inclusion of all one-center two-electron integrals, and a parameter set based on molecular geometry.Lanthanide halides MX₂, MX₃ and MX₄ are studied here, as well as initial results for the twelve coordinate Ce(NO₃)₆ ^–2 ion. Geometries obtained are in excellent agreement with experimental values when available. Many MX₃ complexes are found to be pyramidal, and EuCl₂ and YbCl₂ are calculated to be bent even at the SCF level. Models invoking London type forces are therefore not required. Ionization potentials are calculated for the trihalides (SCF) and are in reasonable agreement with experiment.Contrary to conclusion of others, f-orbital participation, although small, is required — at least in this model — to obtain the spread of metal to halide bond distance observed in these complexes. However f-orbital participation does not seem to be significant even in the twelve coordinate Ce(NO₃)₆ ^–2 complex: rather the large coordination number seems to be a consequence of the relatively large size of the lanthanide ion.