Fluoride-induced intermolecular excimer formation of bispyrenyl thioureas linked by polyethylene glycol chains

New bispyrenyl thioureas linked by polyethylene glycol (PEG) chains, L1-L3, and methoxy benzene pyrene thiourea, L4, were synthesized. Upon binding with F⁻ in CHCl₃, L1-L3 exhibited strong excimer emission bands (I_E) and weak monomer emission bands (I_M), while L4 displayed the same intensity of both bands. However, little or no change was observed in fluorescence spectra of L1 upon adding OH⁻, AcO⁻, BzO⁻, H₂PO₄⁻, Cl⁻, Br⁻, and I⁻. Therefore, only F⁻ induced the pyrene excimer formation. Job’s plots showed 1/1 or 2/2 complexation of L1 with F⁻. Ratios of I_E/I_M of L1·F⁻ complex were dependent on the concentration of L1, implying that the dimerization of L1 proceeded via the intermolecular excimer formation. Among L1-L4, L1 possessed the highest binding constant and sensitivity toward F⁻ implying the importance of the linking PEG chain. L1 was demonstrated to be an excellent probe for F⁻ in CHCl₃ with the detection limit as low as 46.2 μg/L.     

Anion recognition by 2,2′-binaphthalene derivatives bearing urea and thiourea groups at 8- and 8′-positions by UV-vis and fluorescence spectroscopies

Synthesis and anion recognition properties of 2,2′-binaphthalene derivatives bearing two thiourea (1) and urea (2) groups at 8- and 8′-positions were studied. The structure of receptor 1 was determined by X-ray crystallography. UV-vis spectra of the receptors showed characteristic changes around 300-400 nm through isosbestic points upon the addition of biologically relevant anions such as acetate, dihydrogenphosphate, and chloride in MeCN and DMSO due to restriction of the rotation around the single bond connecting two naphthyl moieties by cooperative guest binding of two recognition sites. Job’s plots showed 1:1 complexation for guest anions. The fluorescence quantum yields of free form of 1 and 2 in MeCN were determined to be 0.021 and 0.57, respectively. The fluorescence intensities of the receptors diminished upon the addition of anions in MeCN. The association constants of receptors 1 and 2 were one or two orders of magnitude greater than the corresponding monothiourea and urea receptors 3 and 4 indicating cooperative hydrogen bonding with guest anions. The selectivity trends of association of anions were F⁻>AcO⁻>H₂PO₄⁻>Cl⁻>>HSO₄⁻≈NO₃⁻≈Br⁻≈I⁻ for 1, and F⁻>AcO⁻≈Cl⁻>H₂PO₄⁻>Br⁻>HSO₄⁻>I⁻≈NO₃⁻ for 2. Receptor 2 showed remarkable Cl⁻ selectivity presumably owing to suitable orientation for effective hydrogen bond formation with Cl⁻.     

Calix[4]arenes containing urea and crown/urea moieties: effects of the crown ether unit and Na towards anion binding ability

Calix[4]arenes containing urea and crown/urea moieties, 7 and 10, respectively have been synthesized. ¹H NMR titrations of 7 and 10 with anions in DMSO-d₆ showed that 7 and 10 formed complexes with Cl⁻, Br⁻, NO₃⁻ and H₂PO₄⁻ to a different extent. The association constants of 7 and 10 towards anions were calculated and found to vary as H₂PO₄⁻>Cl⁻>Br⁻>NO₃⁻. However, compared to 7 the presence of the crown unit in 10 resulted in a slightly higher affinity to Cl⁻ and Br⁻, but a lower affinity to H₂PO₄⁻. Upon addition of Na⁺, the binding ability of 10 towards H₂PO₄⁻ is increased due to ion-pair enhancement.     

Synthesis and anion binding properties of new dihomooxacalix[4]arene diurea and dithiourea receptors

Functionalization of the lower rim of p-tert-butyldihomooxacalix[4]arene with two (thio)ureido moieties provided new diurea (n-propyl 5a, tert-butyl 5b and phenyl 5c) and dithiourea (phenyl 5d) derivatives, all in the cone conformation, as shown by NMR studies. The X-ray crystal structure of 5c is reported. The binding ability of these neutral receptors towards a large variety of anions was assessed by ¹H NMR titrations. The structures and complexation energies of some complexes were also studied using DFT methods. The data showed that, in general, the association constants decrease with decrease of anion basicity and they are strongly dependent on the nature of the substituent at the urea moiety. Phenyl-(thio)urea derivatives 5c and 5d are the best anion receptors, showing the strongest complexation for F⁻ (log K_ass=2.70 and 2.75, respectively) and also for the oxoanions AcO⁻, BzO⁻ and H₂₄PO⁻${{\text{H}}_2{\text{PO}}_4}^{-}$. These results were corroborated by DFT calculations.     

Anion recognition through hydrogen bonding by adamantane-dipyrromethane receptors

Adamantane-dipyrromethane (AdD) receptors [di(pyrrole-2-yl)methyladamantane (1), 2,2-di(pyrrole-2-yl)adamantane (2), 1,3-bis[di(pyrrole-2-yl)methyl]adamantane (3), 2,2,6,6-tetra(pyrrole-2-yl)adamantane (4)] form complexes with F⁻, Cl⁻, Br⁻, AcO⁻, NO₃⁻, HSO₄⁻, and H₂PO₄⁻. The association constants of the complexes were determined by ¹H NMR titrations, whereas the geometries of complexes 1·F⁻ (2:1), 2·F⁻ (2:1), 2·Cl⁻ (2:1), 2·AcO⁻ (2:1), and 4·F⁻ (1:1) were determined by X-ray structural analysis. The most stable complexes are of 2:1 stoichiometry with F⁻ and AcO⁻. The stability constants are in accordance with the anion basicity and the ability of AdD receptors to place the hydrogen bonding donor groups in a tetrahedral fashion around anions. The binding energies of the complexes between receptors 1-4 and F⁻ anion are calculated using quantum chemical methods. The calculated results show that the solvent polarity is important for the complexation of fluoride ion with AdD receptors 1-4.     

Naked eye sensing of anions using thiourea based chemosensors with real time application

Novel chromogenic sensors with thiourea moiety as receptor unit were synthesized and characterized using IR and NMR spectroscopic techniques. The receptors 1 and 2 bearing hydrogen bonding site demonstrate visually striking color change, UV–vis, and fluorescence responses for F⁻, AcO⁻, and OH⁻ over other anions such as Cl⁻, Br⁻, H₂PO₄⁻ and HSO₄⁻. Both the receptors 1 and 2 demonstrate detection limit at micro molar level. Further insight to the nature of interaction between receptors and anions was studied using ¹H NMR titration experiment. In particular, the fluoride of tooth paste and mouthwash in water phase can be detected by receptor 2.     

Fluorescent sensor based on dimesitylborylthiophene derivative for probing fluoride and cyanide

A new D-π-A dimesitylboron derivative with terminal phenothiazine bridged by fluorenevinyl (PFTB) has been synthesized. It was found that PFTB could selectively recognize fluoride and cyanide anions by naked eyes. Upon addition of F⁻ and CN⁻, the color of the solution of PFTB in DCM turned to yellowish-green from yellow and strong green emitting was observed under UV light, while the emission of PFTB in DCM was weak. Moreover, the presence of 10 equiv of tetrabutylammonium salts of other anions, such as Cl⁻, Br⁻, I⁻, AcO⁻, HSO₄⁻, H₂PO₄⁻, could not lead to obvious changes of the UV–vis absorption and the fluorescent emission spectra of PFTB. The detection limits of PFTB towards F⁻ and CN⁻ were 7.52×10⁻⁸ mol/L and 6.12×10⁻⁸ mol/L in DCM, respectively. Therefore, the D-π-A type triarylborane derivatives can be used as ‘turn on’ fluorescent sensors for detecting F⁻ and CN⁻.     

Ferrocene-based imidazolium receptors for anions

Cyclic and acyclic ferrocene derivatives bearing two imidazolium rings have been synthesized and characterized by NMR, elemental analysis, mass spectra, and X-ray crystallography. Electrochemical measurements revealed that all the receptors displayed a significant anodic shift response for F⁻. In addition, for receptors 1, 2, and 4, addition of HSO₄⁻ induced quite different electrochemical behavior with dramatic cathodic peak current increase on CV. ¹H NMR titrations demonstrated that receptors 1, 2, and 4 showed selectivity for AcO⁻ while receptor 3 exhibited high affinity toward Cl⁻ among the anions investigated.     

Color response of tri-armed azo host colorimetric sensors and test kit for fluoride

Five new chromogenic tripodal receptors (2a-e) containing electron withdrawing and donating groups appended to the azophenol moiety were synthesized, characterized, and their chromogenic behaviors toward various anions were investigated. These tripodal receptors showed a distinct color change only when treated with fluoride ions in CH₃CN solution. Yet, other anions such as Cl⁻, Br⁻, I⁻, NO₃⁻, ClO₄⁻, AcO⁻, HSO₄⁻, and H₂PO₄⁻ could not cause any color change. Thus, the receptors 2a-e can be used as a colorimetric chemosensor for the determination of fluoride ion. In addition, ¹H NMR experiments were carried out to explore the nature of interaction between tripodal receptors and fluoride. Finally, analytical application and the use of test strip of the receptor 2b to detect fluoride was also reported.     

Urea and thiourea based efficient colorimetric sensors for oxyanions

Urea and thiourea based receptors 1 and 2 bind H₂PO₄⁻, OH⁻, CH₃CO₂⁻, and PhCO₂⁻ ions in an acetonitrile/DMSO (9:1, v/v) medium. Binding of these anions causes an appreciable change in the visible region of the spectrum, which can be detected by the naked eye. The affinity constant for H₂PO₄⁻ is higher by about an order of magnitude as compared to the other oxyanions mentioned above. Ab initio calculations predicted tweezer-like binding modes for receptors 1 and 2 with these anions and a higher affinity toward H₂PO₄⁻ was predicted in acetonitrile.     

Novel highly selective anion chemosensors based on 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole

2-(2-Hydroxyphenyl)-5-phenyl-1,3,4-oxadiazole 1 and 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole 2 were used as anion fluorescent and colorimetric chemosensors with high selectivity for H₂PO₄⁻ and F⁻ over Cl⁻, while 2 can even distinguish H₂PO₄⁻ from F⁻.     

Naked-eye detection of F and AcO ions by Schiff base receptor

A Schiff base 2, composed with o-phenylenediamine and 5-nitro-salicylaldehyde have been synthesized as an anion receptor. It consists with conjugated imine, phenolic -OH and electron withdrawing substituent nitro (-NO₂) group. Receptor 2 can recognize selectively biologically important F⁻ and AcO⁻ ions. The recognition properties have been investigated by naked-eye color change (colorless to yellow), followed by UV-vis spectral changes. Predicted stoichiometries of the complexes between receptor 2 and anions based on density functional theory (DFT) level calculations, corroborates well with experimental findings.     

Effects of the receptors bearing phenol group and copper(II) on the anion recognition and their analytical application

Two novel artificial receptors based on diamide and bearing phenol group and copper(II) have been synthesized. Their anion-binding properties are evaluated for F⁻, Cl⁻, Br⁻, I⁻, AcO⁻, H₂PO₄⁻ and OH⁻ by UV-vis and ¹H NMR titration experiments to further elucidate the impact of phenol group and copper(II) on the chemistry of anion-recognition. Results indicate that the interacted model of fluoride anion with receptor 1 is different from other anions and the ¹H NMR signals of receptor 2 occur changes after the addition of fluoride anion. This may be related with the small radius and strong electronegative property of fluoride. The receptors should have many chemical and analytical applications and the sensing principle should be widely applicable to the sensing of other receptors.     

Convenient synthesis and anion recognition properties of N-flurobenzoyl-N′-phenylthioureas in water-containing media

Novel artificial anionic receptors N-flurobenzoyl-N′-phenylthioureas were synthesized by simple steps in good yields. The binding properties for anions of these N-flurobenzoyl-N′-phenylthioureas and 2N-benzoyl-N′-phenyl thiourea were examined by UV-vis and ¹H NMR spectroscopy. By fluorination of the benzoyl chromophore, the receptors had higher binding affinity for tested anions than the receptor 2. Especially, we studied the anion binding efficiency of the receptors 1N-(3-flurobenzoyl)-N′-phenylthiourea and 2 in dimethyl and dimethyl sulfoxide-water binary solutions in detail respectively. In pure dimethyl sulfoxide, the receptors 1 and 2 had higher binding affinity for F⁻ over AcO⁻. However, as the ratio of water to dimethyl sulfoxide increases, we found the binding properties for tested anions of 1 and 2 changed in dimethyl sulfoxide-water binary solutions. The receptor 1 showed high binding affinity and selective ability for AcO⁻ in dimethyl sulfoxide containing water with varied ratios.     

New P-bridgehead urea-based tripodal anion receptors for H2PO4 recognition

A series of new P-bridgehead tripodal urea-based anion receptors 1-3 bearing phosphine oxide (PO) were synthesized and characterized. Their anion-binding ability was examined by UV-vis, ¹H NMR, ³¹P NMR, and ESI-MS. The results revealed that receptors 1-3 showed good sensitivity, selectivity, and binding affinity for H₂PO₄⁻ over NO₃⁻ and Br⁻, and among them receptor 2 showed the best binding affinity for H₂PO₄⁻ over F⁻, Br⁻, CH₃COO⁻, HSO₄⁻, and NO₃⁻. The Job plot experiments indicated that receptors 1-3 formed 1:1 stoichiometric complex with H₂PO₄⁻.     

Dual responsive chemosensors for anions: the combination of fluorescent PET (Photoinduced Electron Transfer) and colorimetric chemosensors in a single molecule

The design and synthesis of two novel fluorescent PET anion sensors is described, based on the principle of ‘fluorophore-spacer-(anion)receptor’. The sensors 1 and 2 employ simple diaromatic thioureas as anion receptors, and the fluorophore is a naphthalimide moiety that absorbs in the visible part of the spectrum and emits in the green. Upon recognition of anions such as F⁻ and AcO⁻ in DMSO, the fluorescence emission of 1 and 2 was ‘switched off’, with no significant changes in the UV-vis spectra. This recognition shows a 1:1 binding between the receptor and the anions. In the case of F⁻, further additions of the anion, gave rise to large changes in the UV-vis spectra, where the λ_max at 455 nm was shifted to 550 nm. These changes are thought to be due to the deprotonation of the 4-amino moiety of the naphthalimide fluorophore. This was in fact found to be the case, using simple naphthalimide derivatives such as 6. Sensors 1 and 2 can thus display dual sensing action; where at low concentrations, the fluorescence emission is quenched, and at higher concentrations the absorption spectra are modulated.     

Anion-induced ring-opening of fluorescein spirolactam: fluorescent OFF-ON

N-(2,7-Dichlorofluorescein)lactam-N′-phenylthiourea (L) was developed as a colorimetric and fluorescent chemosensor for anions such as AcO⁻, F⁻ and . The addition of AcO⁻ anion to the solution of L in CH₃CN results in a distinct fluorescence “ON” observation as well as color change (from colorless to pink). The H-bonding interaction between AcO⁻ anion and thiourea moiety of L induced the ring-opening of the spirolactam of fluorescein moiety, which gave rise to the dual chromo- and fluorogenic changes.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

New interlocked molecules generated from a podand containing urea units and imidazolium salts using an anion template

A podand containing urea units (L) was found to form interlocked structures with 2,5-dihexylamide imidazolium salts (3·X), 2,5-dihexyl imidazolium salts (4·X), and 2,5-dihexyl benzoimidazolium salts (5·X), where X=Cl⁻, Br⁻, and PF₆⁻ using anions as templates. The binding ability of L and guest molecules was evaluated by ¹H NMR titrations in CDCl₃. It was found that L could form complexes with guest molecules in the following order, 3·X > 5·X > 4·X. Stabilities of the complexes also depended on shape of the templated anions: Cl⁻>Br⁻?PF₆⁻. Hydrogen bonding and π-π stacking interactions played an important role in the self-assembling of these interlocked molecules.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.