Synthesis of methyl α-nitrocrotonate

Summary Methyl -nitrocrotonate has been synthesized by the condensation of methyl nitroacetate with acetaldehyde, acetylation of the methyl -nitro--hydroxybutyrate, and subsequent deacetylation of the resulting product.     

Vibration-rotation infrared spectrum of ν2 of methyl iodide—Coriolis interaction with ν5

Vibration-rotation i.r. spectrum of ν₂ of methyl iodide was measured with a resolution of 0.08 cm⁻¹. The spectrum was analyzed by taking account of an xy-type Coriolis interaction between ν₂ and ν₅ and a Fermi resonance between ν₅ and ν₃ + ν₆. The analysis gave values of spectroscopic parameters which include (ν₀)₂ 1251.193 cm⁻¹, A₂-A₀ 0.02030 cm⁻¹, (D_J)₂ 2.08 × 10⁻⁷ cm⁻¹, (D_JK)₂ 3.2 × 10⁻⁶ cm⁻¹ and ζ_2,5a^y −0.630₅.     

Influence of α-Fe2O3 nanorods on the thermal stability of poly(methyl methacrylate) synthesized by in situ bulk polymerisation of methyl methacrylate

α-Fe₂O₃ nanorods were incorporated into poly(methyl methacrylate) (PMMA) by in situ radical polymerisation of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The α-Fe₂O₃ nanorods were synthesized by forced hydrolysis of FeCl₃ and structural characterization was performed by X-ray diffraction and transmission electron microscopy. The molar mass and the polydispersity index of synthesized PMMA samples were determined by gel permeation chromatography. The content of residual monomer was determined by ¹H NMR spectroscopy. The influence of α-Fe₂O₃ nanorods on the thermal stability of the polymer was investigated using thermogravimetry and differential scanning calorimetry. The molar mass and polydispersity index of PMMA were dependent on the content of α-Fe₂O₃ nanorods. The values of the glass transition temperature of the nanocomposites were lower compared to pure PMMA. Also, the thermal stability of nanocomposites in nitrogen and air was different from that of pure PMMA.     

Efficient Swern oxidation and Corey–Kim oxidation with ion-supported methyl sulfoxides and methyl sulfides

The Swern oxidation of various benzylic and allylic alcohols, primary alcohols, and secondary alcohols with two ion-supported methyl sulfoxides A-1 (C₆) and B-1 (C₁₀), and oxalyl chloride in the presence of triethylamine in dichloromethane, followed by simple diethyl ether extraction of the reaction mixture, gave the corresponding aldehydes and ketones, respectively, in good yields with high purity. Similarly, the Corey–Kim oxidation of various benzylic and allylic alcohols, primary alcohols, and secondary alcohols with two ion-supported methyl sulfides A-2 (C₆) and B-2 (C₁₀), and N-chlorosuccinimide in the presence of triethylamine in dichloromethane, followed by simple diethyl ether extraction of the reaction mixture, furnished the corresponding aldehydes and ketones, respectively, in good yields with high purity. Both reactions did not produce any unpleasant odor at all. In the Swern oxidation, ion-supported methyl sulfides were recovered in high yields and could be re-oxidized to produce ion-supported methyl sulfoxides A-1 (C₆) and B-1 (C₁₀), for reuse in the same oxidation. In the Corey–Kim oxidation, ion-supported methyl sulfides A-2 (C₆) and B-2 (C₁₀) were recovered in high yields and could be also reused for the same oxidation.     

Facile access to methyl tantalum derivatives by unprecedented phosphorus—methyl bond cleavage of dimethylphenylphosphane

Reactions of the paramagnetic pentacoordinated TaBr₃(PhPMe₂)₂ adduct with strong bases, (RLi (R = Me, Bu) or 1,8-bis(dimethylamino)naphthalene) have been found to give methyltantalum(IV) derivatives as a result of PMe bond cleavage.     

KNaY-zeolite catalyzed dehydration of methyl lactate

A promising catalyst,KNaY was prepared by an ion exchange method with aqueous potassium chloride solution.Comparedwith NaY,KNaY was an effective catalyst for the dehydration of methyl lactate to methyl acrylate.Under the optimized conditions,an improved yield of 37.9 mol%was achieved.     

Synthesis of 5-alkyl-5-aryl-γ-lactams from 1-aryl-substituted nitroalkanes and methyl acrylate via Michael addition and reductive lactamization

A general method for accessing 5-alkyl-5-aryl-γ-lactams has been developed using readily available aryl bromides, nitroalkanes, and methyl acrylate as the starting materials. The palladium-catalyzed arylation of nitroalkanes gave the 1-aryl-substituted nitroalkanes, which underwent the DBU-mediated Michael addition with methyl acrylate at room temperature to afford the methyl 4-aryl-4-nitroalkanoates. The latter were then subjected to the nitro reduction using NaBH₄–NiCl₂·6H₂O in MeOH at 0 °C to furnish, after treatment with aqueous K₂CO₃ at room temperature, the 5-alkyl-5-aryl-γ-lactams in good to excellent overall yields. Selected examples of N-alkylation of the γ-lactams were also illustrated.     

Chemoselective ester/ether C–O cleavage of methyl anisates by aluminum triiodide

The aluminum triiodide mediated chemoselective ester/ether C–O cleavage of methyl anisates was investigated. o-Anisate undergoes ether cleavage at low temperatures in carbon disulfide, cyclohexane and acetonitrile. Further cleavage of the ester group occurs at elevated temperatures to afford salicylic acid. The cleavage of p-anisate is solvent-dependent. In cyclohexane, the ester and ether groups were cleaved non-selectively to give equimolar amounts of p-anisic acid and methyl p-hydroxybenzoate. The ester group was preferentially cleaved in acetonitrile, compared to ether group cleavage in carbon disulfide. The ester cleavage reaction was improved using pyridine as an acid scavenger additive. Reasons for the contrasting reactivity of anisates towards AlI₃ were explored, and the methods were applied to cleavage of the tert-butyl ester of acemetacin which gave different products under these conditions.     

Synthesis of 3‐Aryl‐5‐methyl 4‐Substituted [1,2,4]Triazoles

Treatment of N‐substituted acetamides with oxalyl chloride generates imidoyl chlorides, which react readily with aryl hydrazides. Following cyclization, triazoles can easily be obtained in moderate to good yields. 5‐Methyl triazoles can be further functionalized through α‐lithiation and subsequent reaction with an electrophile.     

Thermal properties of the γ-Fe2O3/poly(methyl methacrylate) core/shell nanoparticles

Thermal properties of γ-Fe₂O₃/poly(methyl methacrylate) (PMMA) core/shell particles with an average core size of 4 nm were studied through measurements of thermogravimetry, powder X-ray diffraction and magnetization. The thermal degradation of the PMMA shell in the air was found to occur at temperatures lower by about 60 °C than that of free PMMA. Random scission of the PMMA chains seemed to be catalyzed by the core oxide. The γ-Fe₂O₃ to α-Fe₂O₃ structural transformation took place at different temperatures depending upon the shell material. Namely, α-Fe₂O₃ was the only product for the caprylate-capped γ-Fe₂O₃ nanoparticles treated at 400 °C, whereas γ-Fe₂O₃ still remained for the γ-Fe₂O₃/PMMA composite treated at 500 °C. It is possible that some species containing silicon of the polymerization initiator origin were formed on the surface and prevented interparticle atomic diffusions needed for the γ–α transformation.     

ω-Iodoalkyl(methyl)malonate Esters

Abstract

ω-Iodoalkyl(methyl)malonate esters have potential utility in the bioconjugate chemistry of steroids. A representative set of these esters with a variety of protecting groups and alkyl groups has been prepared. The compounds offer a range of elution values on silica, as well as several convenient deprotection options.

ω-Bromoalkyl(methyl)malonate esters are precursors of chalcogenobarbiturates, which, in radiolabeled form, may be useful as brain imaging agents.[1] Grigsby, R.A., Irgolic, K.J. and Knapp, F.F. 1983. Synthesis and spectral properties of diethyl organylchalcogenoalkyl(alkyl)malonates and 5-alkyl-5-(organylchalcogenoalkyl)barbiturates. J. Organomet. Chem., 259: 171–181.  [Google Scholar] Recently, we have become interested in the analogous ω-iodoalkyl(methyl)malonate esters because of their possible utility in the bioconjugate chemistry of steroids. It is known that steroids can be conjugated to platinum through a malonate moiety.[2] Gandolfi, O., Apfelbaum, H.C., Migron, Y. and Blum, J. 1989. Syntheses of cis-dichlorodiammineplatinum analogs having steroidal hormones bound to the metal atom via malonato bridges. Inorg. Chim. Acta, 161: 113–123.  [Google Scholar] Such platinated steroids are significant because of their potential as tissue-selective antitumor agents.     

Room-temperature monoclinic and low-temperature triclinic phase-transition structures of meso-octa­methyl­calix­[4]­pyrrole–di­methyl sulfoxide (1/1)

Crystals of the title complex, C₂₈H₃₆N₄·C₂H₆OS, undergo a phase transition between room temperature and 198 K, as determined by X-ray diffraction techniques. A monoclinic form is observed at room temperature, while a triclinic modification is found at 198 K, with Z′ changing from 1 to 2. Differential scanning calorimetry (DSC) of the calix­pyrrole–di­methyl sulfoxide complex revealed a series of phase changes between 273 and 243 K. The transition from the room-temperature monoclinic form to the low-temperature triclinic form is reversible, as determined by changes in the cell dimensions from remeasuring selected reflections at room temperature and at temperatures below 223 K. The uncomplexed calix­[4]­pyrrole mol­ecule shows no phase changes occurring between room temperature and 233 K, the low-temperature limit of the DSC.     

SrCl2 as an efficient cocatalyst for acidic hydrolysis of methyl glycosides

SrCl2 was found to be the most efficient cocatalyst for the acidic hydrolysis of methyl glycosides after 26 kinds of most representative metal salts were screened. The SrCl2-cocatalyzed acidic hydrolysis of methyl glycosides is highlighted by short reaction times, less byproducts and high yields. A possible mechanism for the SrCl2-cocatalyzed hydrolysis is also proposed.     

Highly active polymerization of methyl methacrylate catalyzed by Pd-based β-ketoiminato complexes/MAO systems

The substituted β-ketoiminato palladium(II) complexes, Pd[CH₃C(O)CHC(NAr)CH₃](Pph₃)(Me) (1 Ar = α-napthyl, 2 Ar = fluorenyl), when was activated by methylaluminoxane (MAO), were used as highly active catalysts for methyl methacrylate (MMA) polymerization. The effects of temperature, co-catalyst to catalyst molar ratio and polymerization time on catalyst activities were reported. Structural analyses of the polymers by ¹H NMR spectra indicated that polymerization yielded poly(methyl methacrylate) (PMMA) with moderate syndiotactic microstructures. The polymerization results showed that PMMAs obtained using these complexes possibly arose from a coordination-insertion mechanism rather than a radical mechanism.     

Cyclopentadienyl chromium and tungsten complexes with halide, methyl and σ-phenylethynyl ligands: Structures of (η-C5H5)Cr(NO)2(-CC-C6H5), (η-C5H5)Cr(NO)2I and [(η-C5H4)-COOCH3]W(CO)3Cl

With copper(I) iodide as catalyst, σ-alkynyls, compounds (η⁵-C₅H₅)Cr(NO)₂(CC-C₆H₅) (5), [(η⁵-C₅H₄)-COOCH₃]Cr(NO)₂(CC-C₆H₅) (10), and [(η⁵-C₅H₄)-COOCH₃]W(CO)₃(CC-C₆H₅) (13), were prepared from their corresponding metal chloride 1, 6 and 12. Structures of compound 3, 5 and 12 have been solved by X-ray diffraction studies. In the case of 5, there is an internal mirror plane passing through the phenylethynyl ligand and bisecting the Cp ring. The phenyl group is oriented perpendicularly to the Cp with an eclipsed conformation. The twist angle is 0° and 118.4° for -CC-Ph and two NO ligands, respectively. The orientation is rationalized in terms of orbital overlap between ψ₃ of Cp, dπ of Cr atom, and π^∗ of alkynyl ligand, and complemented by molecular orbital calculation. The opposite correlation was observed on the chemical shift assignments of C(2)-C(5) on Cp ring in compounds 6 and 12, using HetCOR NMR spectroscopy. The electron density distribution in the cyclopentadienyl ring is discussed on the basis of ¹³C NMR data and compared with the calculations via density functional B3LYP correlation-exchange method.     

Synthesis of methyl 4,6-O-benzylidene-2,3-dideoxy-5-thio-β-dl-threo-hex-2-enopyranoside via hetero-Diels-Alder reaction and unusual stabilities of 1,5-anhydro-4,6-O-benzylidene 2,3-dideoxy-5-thio-dl-threo-hex-2-enitol

The title compound was prepared via hetero-Diels-Alder reaction of 1-acetoxy-1,3-butadiene and thioaldehyde, followed by Pummerer rearrangement. Different from the corresponding sugar and 5a-carba sugar, C-inside isomer of 1,5-anhydro-4,6-O-benzylidene-2,3-dideoxy-5-thio-dl-thero-hex-2-enitol was found to be thermodynamically more stable than the corresponding O-inside one and these thermodynamic stabilities were corroborated by ab initio calculations.