An expedient synthesis of the fibril binding compound FSB via sequential Pd-catalyzed coupling reactions

The styryl benzene derivative (E, E)-1-fluoro-2,5-bis(3-hydroxycarbonyl-4-hydroxy)styrylbenzene (FSB), well-known for its binding to beta-amyloid peptide fibrils, was synthesized in an efficient manner exploiting two sequential palladium(0)-catalyzed coupling reactions in a 34% overall yield. This is a substantial improvement to the previously reported synthesis of FSB in 1.1%.     

Ex situ atomic force microscopy analysis of beta-amyloid self-assembly and deposition on a synthetic template

The beta-amyloid (Abeta) deposition, which is the conversion of soluble Abeta peptides to insoluble plaques on a surface, is an essential pathological process in Alzheimer's disease (AD). The identification and characterization of possible environmental factors that may influence amyloid deposition in vivo are important to unveil the underlying etiology of AD. According to the amyloid cascade hypothesis, diffuse plaques are initial and visual deposits in the early event of AD, leading to amyloid plaques. To study amyloid deposition and growth in vitro, we prepared a synthetic template by immobilizing Abeta seeds on an N-hydroxysuccinimide ester-activated solid surface. According to our analysis with an ex situ atomic force microscope, the formation of amyloid plaque-like aggregates was mediated by the interaction between Abeta in a solution and on a synthetic template, suggesting that Abeta oligomers function well as seeds for amyloid deposition. It was observed that insoluble amyloid aggregates formed on the template surface serve as a sink of soluble Abeta in a solution as well as mediate the formation of intermediates in the pathway of amyloid fibrillization in a solution. Relative seeding efficiencies of fresh monomers, oligomers, and fully grown fibrils were analyzed by measuring the deposited plaque volume and its height distribution through atomic force microscopy. The result revealed that oligomeric forms of Abeta act more efficiently as seeds than monomers or fibrils do. Fluorescence spectroscopy with thioflavin T confirmed that amyloid aggregate formation proceeds in a concentration-dependent manner. Analysis with Fourier transform infrared spectroscopy indicated a progressive transition of soluble Abeta42 monomer to amyloid fibrils having antiparallel beta-sheet structure on the template. Furthermore, studies on the interaction between Abeta40 and 42, two major variants of Abeta derived from the amyloid precursor protein, showed that amyloid aggregate formation on the surface was accelerated further by the homogeneous association of soluble Abeta42 onto Abeta42 seeds than by other combinations. A slightly acidic condition was found to be unfavorable for amyloid formation. This study gives insight into understanding the effects of environmental factors on amyloid formation via the use of a synthetic template system.     

Relationship between Apolipoprotein E Genotype and Lipoprotein Profile in Patients with Coronary Heart Disease

(1) Background: Apolipoprotein E(ApoE) plays a critical role in lipid transport. The specific allele of APOE being expressed is associated with the development of coronary heart disease (CHD), however the specific mechanisms by which ApoE drives disease are unclear. In this study, we investigated the relationship between APOE allele, lipoprotein metabolome, and CHD severity to provide evidence for the efficacy of clinical cholesterol-lowering therapy; (2) Methods: Blood samples were collected from 360 patients with CHD that were actively being treated with statins. The lipoprotein profile, including particle numbers, particle size, and lipoprotein composition concentrates, was measured by nuclear magnetic resonance (NMR) spectroscopy. The severity of CHD was determined by quantifying coronary angiography results using the Gensini scoring system; (3) Results: We found there was no significant difference in low-density lipoprotein cholesterol (LDL-C) levels among ε2+ (ε2 allele carriers, consisting of ε2/ε2 and ε2/ε3 genotypes), ε3 (consisting of ε3/ε3 and ε2/ε4 genotypes), and ε4+ (ε4 allele carriers, consisting of ε3/ε4 and ε4/ε4 genotypes) participants receiving statin treatment. Compared with the ε3 group, patients with the ε2+ genotype showed lower concentrations of total low-density lipoprotein (LDL), small-LDL, and middle-LDL particles, as well as a larger LDL size, higher very low-density lipoprotein (VLDL) composition concentrates, and higher intermediate density lipoprotein (IDL) composition concentrates. The ε4+ group showed higher concentrations of total LDL, small LDL particles, and LDL compositions with smaller LDL size. The higher level of small LDL concentration was associated with a high Gensini score (B = 0.058, p = 0.024). Compared with the ε3 group, the risk of increased branch lesions in the ε2+ group was lower (OR = 0.416, p = 0.027); (4) Conclusions: The specific allele of APOE being expressed can affect the severity of CHD by altering components of the lipoprotein profile, such as the concentration of small LDL and LDL size.     

Adhesion plaque formation dynamics between polymer vesicles in the limit of highly concentrated binding sites

This work examines the process of adhesion plaque formation between pairs of copolymer vesicles presenting dense surface concentrations of avidin (NeutrAvidin) and biotin. Micropipet aspiration maintains constant membrane tension, as the low-tension vesicle membrane spreads over a second, more tensed vesicle. Spreading rates near 1 microm/s but as high as 7 microm/s (the adhesion plaque diameter) and contact angle growth rates of 2-14 deg/s are observed. The ultimate contact angles, in the range of 120-140 degrees, are independent of membrane tension and also exceed those previously reported. Adhesion plaque formation occurs in three phases: an initial step in which contact is established, typically lasting from a few seconds to a minute, an abrupt jump into contact in which both vesicles undergo substantial deformation, and a slower continued growth of the contact angle and area. Vesicle pairs are irreversibly bound at the plaque such that attempts to peel them apart cause membrane rupture at critical tensions as high as 4 mN/m, setting a lower bound on the interfacial strength. When the quantity tau(1 - cos theta) (with tau the membrane tension and theta the contact angle) is plotted as a function of time during plaque formation for different values of tau, the curves fail to collapse, indicating the chemical driving force for adhesion greatly exceeds the mechanical resisting tension.     

Electrochemical synthesis of Zn-Al layered double hydroxide (LDH) films

A new electrodeposition condition to produce Zn-Al LDH films was developed using nitrate solutions containing Zn (2+) and Al (3+) ions. Deposition was achieved by reducing nitrate ions to generate hydroxide ions on the working electrode. This elevates the local pH on the working electrode, resulting in precipitation of Zn-Al LDH films. The effect of deposition potential, pH of the plating solution, and the Zn (2+) to Al (3+) ratio in the plating solution on the purity and crystallinity of the LDH films deposited was systematically studied using X-ray diffraction and energy dispersive spectroscopy (EDS). The optimum deposition potential to deposit pure and well-ordered Zn-Al LDH films was E = -1.65V versus a Ag/AgCl in 4 M KCl reference electrode at room temperature using a solution containing 12.5 mM Zn(NO 3) 2.6H 2O and 7.5 mM Al(NO 3) 3.9H 2O with pH adjusted to 3.8. The resulting film contained 39 atomic %Al (3+) ions replacing Zn (2+) ions, leading to a composition of Zn 0.61Al 0.39(OH) 2(NO 3) 0.39. xH 2O. Increasing or decreasing the aluminum concentration in the plating solution resulted in the formation of aluminum- or zinc-containing impurities, respectively, instead of varying aluminum content incorporated into the LDH phase. Choosing an optimum deposition potential was important to obtain LDH as a pure phase in the film. When the potential more negative than the optimum potential is used, zinc metal or zinc hydroxide was deposited as a side product, whereas making the potential less negative than the optimum potential resulted in the formation of zinc oxide as the major phase. The pH condition of the plating solution was also critical, as increasing pH destabilizes the formation of the LDH phase while decreasing pH promoted deposition of other impurities.     

硅桥连双(三甲硅基环戊二烯基)钛化合物的合成及脱硅基反应

硅桥连双(三甲硅基环戊二烯基)双锂盐与TiCl₄·2THF反应,生成相应的钛化合物[E(C₅H₃SiMe₃)₂]TiCl₂[E=Me₂SiSiMe₂(3),Me₂SiOSiMe₂(5)],同时还分离到了脱一个三甲硅基的产物[E(C₅H₄)(C₅H₃SiMe₃)]TiCl₂[E=Me₂SiSiMe₂(4),Me₂SiOSiMe₂(6)].其中四甲基二硅氧桥连配体更容易发生这种脱硅基反应.通过元素分析、MS和¹HNMR谱表征了化合物3-6的分子结构.     

Regioselective addition of chalcogenol to an η-propargyl/allenyl complex via formation of the carbon-chalcogen bond leading to new chalcogenoxyallyl species

Regioselective addition of chalcogenol to an ν³-propargyl complex Pt(PPh₃)₂(η³-C₃H₃)](BF₄) (2) via the formation of the C---O, C---S, or C---Se bond generates new cationic chalcogenoxyallyl species {Pt(PPh₃)₂[η³CH₂C(ER)CH₂]}(BF₄) (E = O, R = Me 4(a), Et (4b, ⁱPr (4c), ¹Bu (4d), Ph (4e); E=S, E=Et (5b), ^tBu (5d, Ph (5e); E=Se, R=Ph (6e )) respectively in good yields. Thiol and selenol react with complex 2 much faster than alcohol; and 2 reacts with p-(HO)C₆H₄(SH) to exclusively yield the thioxyallyl product {Pt(PPh₃)₂[η³-CH₂C(SC₆H₄OH)CH₂]}(BF₄) (5f). Among the alcoh and phenol, thereactivity follows the order MeOH > EtOH >, ⁱPrOH >, ^tBuOH > PhOH. A mechanism comprising a preceding coordination step is postulated. The X-ray structures of 4b, 4e, 5b, 5e and 6e are provided.     

Addition of ammonia to AlH3 and BH3. Why does only aluminum form 2:1 adducts?

The electronic structures of the mono- and bisammonia adducts EH3NH3 and EH3(NH3)2, E = B and Al, have been investigated using ab initio electronic structure methods. Geometries were optimized at the MP2/cc-pVTZ level. Higher-level correlated methods (MP4(SDTQ), QCISD(T), CCSD(T)), as well as the G2 and CBS-Q methods, were used to obtain accurate bond dissociation energies. The E-N bond dissociation energy (De) is computed near 33 kcal/mol (E = B) and 31 kca/mol (E = Al), respectively. Whereas the Al-N bond energy pertaining to the second ammonia molecule in AlH3(NH3)2 is 11-12 kcal/mol, only a transition-state structure may be located for the species BH3(NH3)2. We analyze factors which may distinguish Al from B with respect to the formation of stable bisamine adducts. The most significant difference relates to electronegativity and hence the propensity of boron to engage in predominantly covalent bonding, as compared with the bonding of aluminum with ammonia, which shows substantial electrostatic character. Neither steric factors nor the participation of d-orbitals is found to play an important role in differentiating aluminum from boron. The lesser electronegativity of third-row elements appears to be the critical common feature allowing the formation of hypercoordinate complexes of these elements in contrast to their second-row analogues. Consideration of some group 14 analogues and hard/soft acid/base effects supports this view.     

Capillary electrophoresis studies on the aggregation process of beta-amyloid 1-42 and 1-40 peptides

The possibility to monitor, in solution, the steps of beta-amyloid (Abeta) nucleation and therefore to describe this dynamic process by using capillary electrophoresis and under optimized experimental conditions is described. Striking differences in the electrophoretic patterns of Abeta 1-42 and Abeta 1-40 over time are here shown, and different aggregation states are elucidated, which reflect the very diverse oligomerization behavior of two very similar peptides. The isolation of one aggregated species of high molecular weight by ultracentrifugation allowed us to assess its role as toxic oligomer. The perturbation of the existing equilibrium among the identified species by the addition of small molecules can in principle interfere with the aggregation process of the peptides and ultimately prevent the plaque formation in vitro.     

Core-shell structured SiO2@YVO4:Dy3+/Sm3+ phosphor particles: sol-gel preparation and characterization

Spherical SiO(2) particles have been coated with YVO(4):Dy(3+)/Sm(3+) phosphor layers by a Pechini sol-gel process, leading to the formation of core-shell structured SiO(2)@YVO(4):Dy(3+)/Sm(3+) particles. X-ray diffraction (XRD), Fourier-transform IR spectroscopy, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting SiO(2)@YVO(4):Dy(3+)/Sm(3+) core-shell phosphors. The obtained core-shell phosphors have perfect spherical shape with narrow size distribution (average size ca. 300 nm), smooth surface and non-agglomeration. The thickness of shells could be easily controlled by changing the number of deposition cycles (20 nm for one deposition cycle). The core-shell particles show strong characteristic emission from Dy(3+) for SiO(2)@YVO(4):Dy(3+) and from Sm(3+) for SiO(2)@YVO(4):Sm(3+) due to an efficient energy transfer from YVO(4) host to them. The PL intensity of Dy(3+) and Sm(3+) increases with raising the annealing temperature and the number of coating cycles.     

基于程序升温氢化表征的Ni-Al2O3催化剂上CO2-CH4重整反应积炭研究

采用水热沉积法制备Ni-Al₂O₃催化剂,用于CO₂-CH₄重整反应;基于程序升温氢化（TPH）表征,研究了反应时间、温度、原料气CO₂/CH₄比例和空速等因素对CO₂-CH₄重整反应过程中Ni-Al₂O₃催化剂上表面积炭行为的影响。结果表明,表面积炭是导致催化剂重整反应失活的重要原因。随反应时间的延长,催化剂表面积炭量增多,虽未成比例增加,但其TPH峰温有向高温方向移动的趋势,表明所积之炭的石墨化程度增加。反应温度和空速对催化剂表面积炭也有一定影响,且空速的影响更大。另外,由于CO₂消炭反应（CO₂+C=2CO）的存在,CO₂/CH₄比例对表面积炭的影响也很大。CO₂/CH₄比例太低,不能明显抑制积炭;随着CO₂/CH₄比例增加,积炭将得到有效抑制,但CO₂/CH₄比例过高,CO₂在产物中的分离和回收再利用将使成本增加。     

Reactivity of the dimesityl-1,8-naphthalenediylborate anion: isolation of the borataalkene isomer and synthesis of 1,8-diborylnaphthalenes

The anionic boron peri-bridged naphthalene derivative, namely dimesityl-1,8-naphthalenediylborate (1), undergoes a hydrolysis reaction to afford dimesityl-1-naphthylborane (2) whose structure has been determined. Upon standing at room temperature in toluene for an extended period of time, 1 undergoes a ring expansion reaction to afford 8,10,11a-trimethyl-7-mesityl-11aH-7-boratabenzo[de]anthracene (3). As shown by its crystal structure, compound 3 constitutes a rare example of a borataalkene and features a carbon-boron double bond of 1.475(6) Angstroms incorporated in a conjugated hexa-1-boratatriene system. The reaction of 1 with 9-chloro-9-borafluorene and 5-bromo-10,11-dihydrodibenzo[b,f]borepin results in the formation of diboranes 4 and 5 which bear two different boryl moieties at the peri-positions of naphthalene. These diboranes have been characterized by multinuclear NMR spectroscopy and X-ray single crystal analysis. The boron center of the borafluorenyl moiety is pi-coordinated to the ipso-carbon of a mesityl group with which it forms a contact of 2.730(3) Angstroms. The cyclic voltammogram of 2 in THF shows a quasi-reversible reduction wave at E(1/2)-2.41 V (vs. Fc/Fc+) corresponding to the formation of the radical anion. In the case of diboranes 4, 5 and 1-(dimesitylboryl)-8-(diphenylboryl)naphthalene (6), two distinct waves are observed at E(1/2)-2.14 and -2.56 V for 4, E(1/2)-2.26 and -2.78 V for 5, and E(1/2)-2.41 and -2.84 V for 6. The first reduction wave most likely indicates the formation of a radical anion in which the unpaired electron is sigma-delocalized over the two boron centers.     

A theoretical study on the formation of EX4+ and E2X5+(E = P, As; X = Br, I) from Ag+ and EX3/X2

The mechanism and the thermodynamics of the formation of EX2+, EX4+ and E2X5+ (E = As, P; X = Br, I) was carefully analyzed with MP2/TZVPP calculations and inclusion of entropy and solvation effects (COSMO model approximating CH2Cl2). Thus, as likely intermediates the complexes of Ag+ and one or two EX3 as well as EX3/X2 were optimized. The global minimum isomers of the Ag(EX3)2+ intermediates were found to be P-coordinated Ag(PI3)2+ and (BrPBr2)Ag(PBr3)+ but exclusively halogen coordinated Ag(X2AsX)2+ complexes. Similarly complicated is the situation for the Ag(EX3)(X2)+ intermediates: (I3E)Ag(I2)+, (BrAsBr2)Ag(Br2)+ and (Br3P)(Br-Br)Ag+ complexes were found to be the global minima. Based on all available results likely mechanisms for the formation of the known PX4+, AsBr4+, P2X5+ salts (X = Br, I) from these intermediates were proposed. An explanation for the failure to prepare an AsI4+ salt is also given.     

Mixed Micellization of Dimeric (Gemini) Surfactants and Conventional Surfactants

The aqueous solutions of mixtures of various conventional surfactants and dimeric anionic and cationic surfactants have been investigated by electrical conductivity, spectrofluorometry, and time-resolved fluorescence quenching to determine the critical micelle concentrations and the micelle aggregation numbers in these mixtures. The following systems have been investigated: 12-2-12/DTAB, 12-2-12/C(12)E(6), 12-2-12/C(12)E(8), 12-3-12/C(12)E(8), Dim3/C(12)E(8), and Dim4/C(12)E(8) (12-2-12 and 12-3-12=dimethylene-1,2- and trimethylene-1,3-bis(dodecyldimethylammonium bromide), respectively; C(12)E(6) and C(12)E(8)=hexa- and octaethyleneglycol monododecylethers, respectively; Dim3 and Dim4=anionic dimeric surfactants of the disodium sulfonate type, Scheme 1; DTAB=dodecyltrimethylammonium bromide). For the sake of comparison the conventional surfactant mixtures DTAB/C(12)E(8) and SDS/C(12)E(8) (SDS=sodium dodecylsulfate) have also been investigated (reference systems). Synergism in micelle formation (presence of a minimum in the cmc vs composition plot) has been observed for the Dim4/C(12)E(8) mixture but not for other dimeric surfactant/nonionic surfactant mixtures investigated. The aggregation numbers of the mixed reference systems DTAB/C(12)E(8) and SDS/C(12)E(8) vary monotonously with composition from the value of the aggregation number of the pure C(12)E(8) to that of the pure ionic component. In contrast, the aggregation number of the dimeric surfactant/C(12)E(8) mixtures goes through a minimum at a low value of the dimeric surfactant mole fraction. This minimum does not appear to be correlated to the existence of synergism in micelle formation. The initial decrease of the aggregation number of the nonionic surfactant upon addition of ionic surfactant, up to a mole fraction of ionic surfactant of about 0.2 (in equivalent per total equivalent), depends little on the nature the surfactant, whether conventional or dimeric. The results also show that the microviscosity of the systems containing dimeric surfactants is larger than that of the reference systems. Copyright 2001 Academic Press.     

Randomization of Amyloid‐β‐Peptide(1‐42) Conformation by Sulfonated and Sulfated Nanoparticles Reduces Aggregation and Cytotoxicity

The amyloid‐β peptide (Aβ) plays a central role in the mechanism of Alzheimer's disease, being the main constituent of the plaque deposits found in AD brains. Aβ amyloid formation and deposition are due to a conformational switching to a β‐enriched secondary structure. Our strategy to inhibit Aβ aggregation involves the re‐conversion of Aβ conformation by adsorption to nanoparticles. NPs were synthesized by sulfonation and sulfation of polystyrene, leading to microgels and latexes. Both polymeric nanostructures affect the conformation of Aβ inducing an unordered state. Oligomerization was delayed and cytotoxicity reduced. The proper balance between hydrophilic moieties and hydrophobic chains seems to be an essential feature of effective NPs.

     

Pb deposition on I-coated Au(111). UHV-EC and EC-STM studies

This article concerns the growth of an atomic layer of Pb on the Au(111)( radical3 x radical3)R30 degrees -I structure. The importance of this study lies in the use of Pb underpotential deposition (UPD) as a sacrificial layer in surface-limited redox replacement (SLRR). SLRR reactions are being applied in the formation of metal nanofilms via electrochemical atomic layer deposition (ALD). Pb UPD is a surface-limited reaction, and if it is placed in a solution of ions of a more noble metal, redox replacement can occur, but limited by the amount of Pb present. Pb UPD is a candidate for use as a sacrificial layer for replacement by any more noble element. It has been used by this group for both Cu and Pt nanofilm formation using electrochemical ALD. The I atom layer was intended to facilitate electrochemical annealing during nanofilm growth. Two distinctly different Pb atomic layer structures are reported, studied using in situ scanning tunneling microscopy (STM) with an electrochemical flow cell and ultrahigh vacuum surface analysis combined directly with electrochemical reactions (UHV-EC). Starting with the initial Au(111)( radical3 x radical3)R30 degrees -I, 1/3 monolayer of I on the Au(111) surface, Pb deposition began at approximately 0.1 V. The first Pb UPD structure was observed just below -0.2 V and displayed a (2 x radical3)-rect unit cell, for a structure composed of 1/4 monolayer each of Pb and I. The I atoms fit in Pb 4-fold sites, on the Au(111) surface. The structure was present in domains rotated by 120 degrees. Deposition to -0.4 V resulted in complete loss of the I atoms and formation of a Pb monolayer on the Au(111), which produced a Moiré pattern, due to the Pb and Au lattice mismatch. These structures represent two well-defined starting points for the growth of nanofilms of other more noble elements. It is apparent from these studies that the adsorption of I- on Pb is weak, and it will rinse away. If Pb is used as a sacrificial metal in an electrochemical ALD cycle and adsorbed I atoms are employed for electrochemical annealing, I atoms will need to be applied each cycle.     

Liquid chromatography/mass spectrometry analysis of bifunctional electrophiles and DNA adducts from vitamin C mediated decomposition of 15-hydroperoxyeicosatetraenoic acid

Reactive oxygen species convert the omega-6 polyunsaturated fatty acid arachidonic acid into 15-hydroperoxy-5,8,11,13-(Z,Z,ZE)-eicosatetraenoic acid (15-HPETE). Cyclooxygenases and lipoxygenases can also convert arachidonic acid into 15-HPETE. Vitamin C mediated decomposition of 15(S)-HPETE to protein- and DNA-reactive bifunctional electrophiles was examined by normal-phase liquid chromatography/atmospheric pressure chemical ionization/mass spectrometry (LC/APCI-MS). The individual bifunctional electrophiles, trans-4,5-epoxy-2(E)-decenal (t-EDE), cis-4,5-epoxy-2(E)-decenal (c-EDE), 4-oxo-2(E)-nonenal (ONE), and 4-hydroxy-2(E)-nonenal (HNE), exhibited protonated molecules at m/z 169, 169, 155, and 157, respectively. The MH+ ion at m/z 173 for 4-hydroperoxy-2(E)-nonenal (HPNE) was very weak with an ion corresponding to the loss of OH at m/z 156 as the major ion in the APCI mass spectrum. The bifunctional electrophiles were all separated under normal-phase LC conditions. All five bifunctional electrophiles were formed when 15-HPETE was treated with vitamin C. The LC/MS-based methodology showed that t-EDE was the major bifunctional electrophile formed during vitamin C mediated 15(S)-HPETE decomposition. Stable isotope dilution LC/MS studies revealed that this did not result in the formation of increased levels of unsubstituted etheno-dGuo adducts in calf thymus DNA when compared with 13(S)-hydroperoxy-9,10-(Z,E)-octadecadienoic acid [13(S)-HPODE], a lipid hydroperoxide derived from linoleic acid. However, the formation of heptanone-etheno-dGuo adducts in calf thymus DNA was reduced when compared with the 13(S)-HPODE. This was attributed to the reduced formation of ONE from 15-HPETE when compared with its formation from 13-HPODE. In contrast to reactions with dGuo or DNA conducted using 13(S)-HPODE, no carboxy-containing adducts were observed with 15(S)-HPETE.     

Reversible adduct formation of trimethylgallium and trimethylindium with ammonia

We have used gas-phase infrared spectroscopy to determine the equilibrium constant (K(p)) for the formation of (CH(3))(3)Ga:NH(3) and (CH(3))(3)In:NH(3) adducts in the 80-230 degrees C range. In this temperature range, and at reactant concentrations typically used for metal organic chemical vapor deposition, the dominant chemical reaction is reversible adduct formation/dissociation. Reaction enthalpies and entropies are extracted from the temperature dependence of K(p), yielding DeltaH(Ga) = -16.3 +/- 0.5 kcal/mol, DeltaS(Ga) = -32.4 +/- 1.2 eu, and DeltaH(In) = -15.0 +/- 0.6 kcal/mol, DeltaS(In) = -30.3 +/- 1.4 eu. These results will aid current and future modeling efforts, as well as advance our general understanding of the group-III nitride deposition process.     

Analysis of differential plaque depositions in the brains of Tg2576 and Tg-APPswe/PS1dE9 transgenic mouse models of Alzheimer disease

Adequate assessment of plaque deposition levels in the brain of mouse models of Alzheimer disease (AD) is required in many core issues of studies on AD, including studies on the mechanisms underlying plaque pathogenesis, identification of cellular factors modifying plaque pathology, and developments of anti-AD drugs. The present study was undertaken to quantitatively evaluate plaque deposition patterns in the brains of the two popular AD models, Tg2576 and Tg-APPswe/ PS1dE9 mice. Coronally-cut brain sections of Tg2576 and Tg-APPswe/PS1dE9 mice were prepared and plaque depositions were visualized by staining with anti- amyloid β peptides antibody. Microscopic images of plaque depositions in the prefrontal cortex, parietal cortex, piriform cortex and hippocampus were obtained and the number of plaques in each region was determined by a computer-aided image analysis method. A series of optical images representing a gradual increase of plaque deposition levels were selected in the four different brain regions and were assigned in each with a numerical grade of 1-6, where +1 was lowest and +6, highest, so that plaques per unit in mm(2) increased "sigmoidally" over the grading scales. Analyzing plaque depositions using the photographic plaque reference panels and a computer-aid image analysis method, it was demonstrated that the brains of Tg2576 mice started to accumulate predominantly small plaques, while the brains of Tg-APPswe/PS1dE9 mice deposited relatively large plaques.