Kinetics and mechanism of mercury(II)-catalysed replacement of cyanide in hexacyanoferrate(II) by p-nitrosodiphenylamine

The mercury(II)-catalysed replacement of cyanide in hexacyanoferrate(II) by p-nitrosodiphenylamine (p-NDA) in aqueous solution has been investigated spectrophotometrically by measuring the change in absorbance of the green complex ion, [Fe(CN)(5).p-NDA](3-), at 640 nm. Activation parameters of the catalysed and uncatalysed reactions have been calculated. The effects of the dielectric constant and water content of the medium on reaction rates are used to explain the formation of a polar activated complex and suggest an I(d) mechanism for the catalysed reaction. The varying catalytic activity of Hg(II) as a function of concentration has been discussed.     

Kinetic and mechanistic study of the mercury(II)-catalyzed substitution of cyanide in hexacyanoruthenate(II) by pyrazine

The kinetics of mercury(II)-catalyzed substitution of cyanide ligand in hexacyanoruthenate(II) by pyrazine (Pz) has been investigated spectrophotometrically at 370 nm in aqueous medium. The reaction exhibits first-order dependence on [Pz] at low concentrations, then reaches a maximum value, and finally decreases at high [Pz]. The reaction has a variable-order dependence in [Ru(CN)₆ ⁴⁻], unity at lower [Ru(CN)₆ ⁴⁻], and fractional order, not tending to zero order at higher [Ru(CN)₆ ⁴⁻]. The effects of pH, ionic strength, concentration of catalyst, and temperature variations have been studied. The activation parameters for the reaction were calculated. We propose a solvent assisted interchange dissociative (I _d) mechanism for the reaction.     

Salt effects in the reaction of hexacyanoferrate(II) with periodate

The effects of various salts on the kinetics of ferrocyanide oxidation by periodate are reported. The reaction exhibits salt effects of low specificity at low concentrations of the added salts (<0.1 M). At higher concentrations, the effectiveness order for alkaline cations is Li⁺>K⁺>Na⁺ and tetralkylammonium ions have a comparable (Et₄N⁺) or even greater (Me₄N⁺) accelerating effects than alkaline cations.

---

. (<0,1 M) . : Li⁺>K⁺>Na⁺. (Et₄ N⁺) (Me₄ N⁺) , .

     

Kinetics and mechanism of exchange of cyanide in hexacyanoferrate(II) by N-methylpyrazinium ion in the presence of mercury(II) as a catalyst

The kinetics of the mercury(II) catalysed ligand exchange of the hexacyanoferrate(II) complex with the N-methylpyrazinium ion (Mpz⁺) in a potassium hydrogen phthalate buffer medium has been investigated at 25.0 ± 0.1 °C, pH = 5.0 ± 0.02 and ionic strength, I = 0.1 M (KNO₃). The reaction was followed spectrophotometrically in the aqueous medium by measuring the increase in absorbance of the intense blue complex [Fe(CN)₅Mpz]^2– at its _max 655 nm. The effect of pH, and the concentrations of [Fe(CN)₆ ^4–] and Mpz⁺ on the reaction rate have been studied and analysed. The varying catalytic activity of mercury(II) as a function of concentration has also been explained. The kinetic data suggest that substitution follows an interchange dissociative (I _d) mechanism and occurs via formation of a solvent-bound intermediate. The effects of the dielectric constant of the medium on the reaction rates have been used to visualize the formation of a polar activated complex and an interchange dissociative mechanism for the reaction. A mechanism has been proposed in order to interpret the kinetic data. Kinetic evidence is reported for the displacement of CN^– by Mpz⁺ in [Fe(CN)₆ ^4–]. Activation parameters for the catalysed and uncatalysed reaction have been evaluated, and lend further support to the proposed mechanism.     

Kinetic determination of Hg(II) based on its accelerating effect on the reaction between hexacyanoferrate(II) and 1,10-phenanthroline catalysed by micelles

A kinetic-photometric method for the determination of Hg(II) over the range 10-80 ng/ml is proposed. It is based on the accelerating effect of this ion on the reaction between hexacyanoferrate(II) and 1,10-phenanthroline which is monitored via the ferroin complex formed. Anionic sodium dodecyl sulphate (SDS) micelles, which catalyse the reaction, allow the ferroin complex to be formed under more acidic conditions. Combination of this pH shift and the development of the reaction in the vicinity of micelles results in improved selectivity in the determination of Hg(II) compared to the reaction occurring in an aqueous medium. Some observations on the effect of SDS on the reaction are reported.     

Titration of cyanide and hexacyanoferrate(II) with silver nitrate-II Determination of sodium cyanide and sodium hexacyanoferrate(II) in a complexing agent

Cyanide and hexacyanoferrate(II) can be titrated with silver nitrate in the presence of a complexing agent masked with a suitable metal ion. A method for determination of sodium cyanide and sodium hexacyanoferrate(II) in the presence of sodium nitrilotriacetate masked with magnesium ions is given as an example.     

Catalyst and substituent effects on the rhodium(II)-catalysed intramolecular Buchner reaction

Intramolecular rhodium(II)-catalysed aromatic addition (Buchner) reactions of a range of α- and β-substituted α-diazoketones are reported. Both steric and electronic effects are evident for the aromatic additions investigated. In general, highly efficient aromatic addition is achieved through use of rhodium carboxylates bearing electronegative ligands, such as rhodium trifluoroacetate, while aromatic addition employing rhodium catalysts with more electron-donating ligands, such as rhodium caprolactam, is less efficient. Excellent levels of diastereoselectivity are possible for this process in the presence of rhodium acetate and rhodium caprolactam, however, a reduction in diastereocontrol is generally associated with use of the more reactive, electronegative catalysts. Interestingly, these catalyst effects can be overcome through the steric effects of the substituents on the α-diazoketone substrates, with the presence of sterically bulky substituents at the 2- or 3-position rendering the aromatic addition essentially catalyst independent in terms of efficiency and diastereocontrol.     

Ruthenium(VI)-catalysed oxidation of diols by alkaline hexacyanoferrate(III) ion. A kinetic study

The kinetics of Ru^VI-catalysed oxidation of ethane-1,2-diol, propane-1,3-diol, butane-1,3-diol, butane-1,4-diol and 2-butoxyethanol by hexacyanoferrate(III) ion in an aqueous alkaline medium at constant ionic strength shows zeroth order dependence on hexacyanoferrate(III) and first order dependence on Ru^VI and substrate. The results suggest that a complex is formed, between Ru^VI and the diol, which slowly decomposes to a reduced form of ruthenium, which is reoxidized to Ru^VI in a fast step by alkaline hexacyanoferrate(III). A plausible reaction mechanism is proposed.     

Determination of chloride by displacement of hydrogen cyanide from mercury(II) cyanide

A method, based on the passivity of mercury(II) cyanide in dilute sulphuric acid and its reaction with hydrochloric acid to produce hydrogen cyanide, has been developed for the determination of small amounts of chloride. Hydrogen cyanide, distilled from a mercury(II) cyanide-halide-dilute sulphuric acid system is found by iodometric measurement to be directly proportional to the amount of chloride or bromide and of hydrogen ion in acids such as sulphuric acid. A linear correlation also holds for iodide but the stoichiometry is different, the titration values being about three times larger than expected. By conversion of the cyanide into a dye by means of the pyridine-pyrazolone reagent, 0.014-0.43 mug ml chloride concentrations have been determined. The method is also applicable to bromide and sulphuric acid in small amounts but not to fluoride and iodide. Results are reproducible to within +/-2%.     

Kinetics and mechanism of ligand exchange of coordinated cyanide in hexacyanoferrate(II) by nitroso‐R‐salt in the presence of mercury(II) as a catalyst

The kinetics of Hg(II)‐catalyzed reaction between hexacyanoferrate(II) and nitroso‐R‐salt has been followed spectrophotometrically by monitoring the increase in absorbance at 720 nm, the λ_max of green complex, [Fe(CN)₅ N‐R‐salt]^3? as a function of pH, ionic strength, temperature, concentration of reactants, and the catalyst. In this reaction, the coordinated cyanide ion in hexacyanoferrate(II) gets replaced by incoming N‐R‐salt under the following specified reaction conditions: temperature = 25 ± 0.1°C, pH = 6.5 ± 0.2, and I = 0.1 M (KNO₃). The stoichiometry of the complex has been established as 1:1 by mole ratio method. The rate of catalyzed reaction is slow at low pH values and then increases with pH and attains a maximum value between 6.5 and 6.7. The rate finally falls again at higher pH values due to nonavailability of [H⁺] ions needed to regenerate the catalytic species. The rate of reaction increases initially with [N‐R‐salt] and attains a maximum value and then levels off at higher [N‐R‐salt]. The rate of reaction shows a variable order dependence in [Fe(CN)₆^4?] ranging from unity at lower concentration to 0.1 at higher concentrations. The effect of [Hg²⁺] on the reaction rate shows a complex behavior and the same has been explained in detail. The activation parameters for the catalyzed reactions have been evaluated. A most plausible mechanistic scheme has been proposed based on the experimental observations. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 222–232, 2005     

Ligand effects on Ni(II)-catalysed alkane-hydroxylation with m-CPBA

Nickel(ii) complexes supported by a series of pyridylalkylamine ligands [tris(2-pyridylmethyl)amine (TPA; complexes and ), tris[2-(2-pyridyl)ethyl]amine (TEPA; complexes and ), 6-[N,N-bis(2-pyridylmethyl)aminomethyl]-2,4-di-tert-butylphenol ((Dtbp)Pym2H; complexes and ), 6-[N,N-bis[2-(2-pyridyl)ethyl]aminomethyl]-2,4-di-tert-butylphenol ((Dtbp)Pye2H; complexes and ), N-benzyl-bis(2-pyridylmethyl)amine ((Bz)Pym2; complex ) and N-benzyl-bis[2-(2-pyridyl)ethyl]amine ((Bz)Pye2; complex )] have been synthesized and structurally characterized by X-ray crystallographic analysis [coordinating counter anion (co-ligand) of complexes n (n = 1-6) is AcO(-) and that of complexes n (n = 1-4) is NO(3)(-)]. All complexes, except , were obtained as a mononuclear nickel(ii) complex exhibiting a distorted octahedral geometry, whereas complex was isolated as a dinuclear nickel(ii) complex bridged by two nitrate anions. Catalytic activity of the nickel(ii) complexes were examined in the oxidation of cyclohexane with m-CPBA as an oxidant. In all cases, the oxygenation reaction proceeded catalytically to give cyclohexanol as the major product together with cyclohexanone as the minor product. The complexes containing the pyridylmethylamine (Pym) metal-binding group (, , ) showed higher turnover number (TON) than those containing the pyridylethylamine (Pye) metal-binding group (, , ), whereas the alcohol/ketone (A/K) selectivity was much higher with the latter (Pye system) than the former (Pym system). On the other hand, the existence of the NO(3)(-) co-ligand (, and ) caused a lag phase in the early stage of the catalytic reaction. Electronic and steric effects of the supporting ligands as well as the chemical behavior of the co-ligands on the catalytic activity of the nickel(ii) complexes have been discussed on the basis of their X-ray structures.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

Kinetics and mechanism of the ruthenium(III)-catalysed oxidation of aminoalcohols by alkaline hexacyanoferrate(III)

Summary The kinetics of the ruthenium(III)-catalysed oxidation of aminoalcoholsviz. 2-aminoethanol and 3-aminopropanol by alkaline hexacyanoferrate(III) has been studied spectrophotometrically. The reactions are rapid initially, then follow a second order rate dependence with respect to each of the catalyst and the oxidant. The second order rate dependence with respect to ruthenium(III) was observed for the first time. The order in [Aminoalcohol] and [OH^–] is unity in each case. A suitable mechanism, consistent with the observed kinetic data is postulated.     

Aromatic substitution. The effect of alcoholic solvents on the reaction of phenyltriethyltin with mercury (II) salts

Second-order rate constants are reported for the cleavage of the phenyltin bond of phenyltriethyltin by mercury(II) salts in ethanol. propan-1-ol, propan2-ol and butan-1-ol. It is shown that the reactivity order for the mercury(II) salts is HgI₃^? << HgI₂ < HgCl₂. Activation parameters are reported, and on the basis of the low values of activation enthalpies the presence of an intermediate π-complex is suggested for the reactions.     

The dynamic behaviour of the silver-silver hexacyanoferrate(II) electrode: coulometric production of hexacyanoferrate(II)

The electrochemical behaviour of the silver-silver hexacyanoferrate(II) elec-trode was studied. The reaction Ag₄[Fe(CN)₆] + 4e^- → 4Ag + [Fe(CN)₆]^4- was shown to be useful for the coulometric production of hexacyanoferrate(II) ions in titrations of zinc(II). Coulometric titrations of organometallic compounds such as R₂Sn(ClO₄)₂, with electrically generated hexacyanoferrate(II) are also reported.     

Sequential homobimetallic catalysis: an unprecedented tandem Pd(0)-catalysed deprotection - Pd(II)-catalysed heterocyclisation reaction leading to benzofurans

We report here the first example of "sequential homobimetallic catalysis": a transition metal catalyst with the metal in a certain oxidation state catalyses the deprotection of a functional group, which in situ undergoes a subsequent transformation catalysed by another complex of the same metal but in a different oxidation state.     

Pd(II) inhibition during hexacyanoferrate(III) oxidation of sugars: A kinetic study

An inhibition effect of PdCl₂ on the rate of oxidation of sugars by alkaline hexacyanoferrate(III) has been observed. The order of reactions in hexacyanoferrate(III) and OH⁻ is zero and unity, respectively, while that in sugars decreases from unity at higher sugar concentration. The kinetic data and spectrophotometric evidence support the formation of {Pd^II − (sugar)} and {Pd^II − sugar)₂} complexes and their resistance to react with Fe(CN)₆³⁻ © 1996 John Wiley & Sons, Inc.