应用反射型球面菲涅耳波带片的成像物镜设计

设计了一种应用球面菲涅耳波带反射面与非球面反射面结合的成像物镜。对球面结构的菲涅耳波带反射面进行分析,推导了球面菲涅耳波带反射面近似替代非球面的方法,采用单片球面菲涅耳波带反射面和三片非球面反射面设计成像物镜,在放大倍数100×、视场角120°、菲涅耳数2.5情况下,调制传递函数在放大成像侧可实现0.6 lp/mm的40%以上,畸变小于2.2%。该设计方法为菲涅耳波带片应用于可见光成像提供了参考,并随着菲涅耳器件加工技术的不断发展具有良好的应用前景。     

Nanometer-scale ablation with a table-top soft x-ray laser

Ablation of holes with diameters as small as 82 nm and very clean walls was obtained in poly(methyl methacrylate) focusing pulses from a Ne-like Ar 46.9 nm compact capillary-discharge laser with a freestanding Fresnel zone plate diffracting into third order. These results demonstrate the feasibility of using focused soft x-ray laser beams for the direct nanoscale patterning of materials and the development of new nanoprobes.     

Axial intensity distribution behind a Fresnel zone plate

An analytical expression based on an improved Rayleigh–Sommerfeld diffraction formula with evanescent term is derived for analyzing the axial light intensity distribution throughout the whole space behind a Fresnel zone plate. The effects of the number of Fresnel zones and the size of aperture on the axial intensity distribution are calculated for two kinds of Fresnel zone plate with larger and smaller aperture. The validity of the general formulae for calculating the focal lengths and the relative intensities of the foci of a Fresnel zone plate is analyzed.     

Improving the resolution of a solid immersion lens optical system using a multiphase Fresnel zone plate

We propose a method to improve the resolution of near-field optical system with a solid immersion lens by using a multiphase level Fresnel zone plate. The analyses are based on scalar angular spectrum theory. The results show that the multiphase Fresnel zone plate can not only decrease the spot size but also decrease the sidelobe intensity and enhance greatly the diffractive efficiency compared with annular amplitude filter or binary 2-, 3-, 4-zone phase filter.     

使用二元相位菲涅尔波带片产生轴向线聚焦

介绍了一种全新的轴向线聚焦方案.采用菲涅尔波带片，在实验中产生了沿轴向长为5mm，宽 100μm的线聚焦.光学测量表明，线聚焦轴向强度分布比较均匀.这些参数基本上可以满足激 光等离子体实验的要求. 关键词： 菲涅尔波带片 轴向线聚焦     

Optically inscribed surface-relief zone plates in azo polymer films

We describe a simple and cost-effective holographic method for the fabrication of surface-relief zone plates.The zone plate is inscribed by interference between the first- and second-order diffracted waves from an ionetched Fresnel zone plate. The inscribed surface-relief zone plates are observed by atomic force microscope (AFM). The formation process of the surface grating and the mass diffusion in azo polymer are analyzed.     

准随机点阵二值化Gabor波带片聚焦特性的数值计算

 Fresnel波带片有多个焦点,作为单色器波长选择元件使用时会受到高级衍射的影响。而Gabor波带片只有一个焦点,有更好的聚焦特性,但制作难度较大,准随机点阵二值化Gabor波带片概念的提出则解决了这个问题。介绍了准随机点阵二值化Gabor波带片的设计,并利用优化的程序分别对Fresnel波带片和准随机点阵二值化Gabor波带片的聚焦特性进行了模拟计算,通过对计算结果进行分析比较,发现准随机点阵二值化Gabor波带片具有抑制高阶衍射的特性。     

Focussing of slow neutrons with cylindrical zone plates

We report on the successful focussing of a slow neutron beam by means of a cyclindrical Fresnel zone plate.     

具有准单级聚焦特性的梯形波带片（英）

为改进用于X射线聚焦的二值化Gabor波带片目前所存在的结构复杂、不利于加工制作的问题,在不改变梯形透过率函数的前提下,通过将传统的梯形孔基元变为平行四边形基元应用于波带片的设计之中,提出了一种聚焦效率更高的具有准单级聚焦特性的波带片。理论推导显示,该波带片除了像Fresnel波带片一样能够消除偶数级的焦点外,还可以消除3q级（q为整数）的焦点,1/m4（m为焦点级数）的效率衰减系数也使得高级衍射得到了很好的抑制。MATLAB数值模拟的结果证明,该波带片的特性不仅满足以上推论,还具有比Fresnel波带片和环带扇形基元阵列波带片更低的背景噪声,可以看作是一种准单级聚焦的新型波带片。此外,在同一波带内,这种基于平行四边形基元孔的波带片设计的透光区始终保持各处的径向宽度为该波带的一半,且扇区结构简单一致,能够降低不少加工难度,易于推广应用。     

Focusing behavior of fresnel zone plates having various central phases

A point source focused by a Fresnel zone plate may interfere constructively or destructively with the undiffracted background. Fresnel zone plates with unusually small dark centers empirically lead to constructive interference.     

连续相位变化毫米波衍射天线

基于菲涅尔原理及卡塞格伦天线设计方法,设计了一种口面直径为200 mm的卡赛格伦菲涅耳相位修正平面天线。天线采用连续相位修正方式,由一组同心菲涅耳相位修正圆环组成,与传统卡赛格伦抛物面天线相比,该天线具有平面化结构,大大减小了天线自身重量,天线辐射性能较离散相位衍射天线有大幅度提高。在95 GHz频率下,采用物理光学法进行仿真计算,并采用近场扫描系统进行了天线性能测试,天线3 dB波束宽度分别为0.95及1.05,天线实测增益为44.1 dB,天线口面效率为65%。     

Birefringent Fresnel zone plates in silica fabricated by femtosecond laser machining

We demonstrate maskless, single-step fabrication of strongly birefringent Fresnel zone plates by focusing of femtosecond laser pulses deep within silica substrates. The process allows us to produce alternate zone rings directly by inducing a local refractive-index modification of the order of n~10(-2) . The embedded zone plates shown in this Letter exhibit efficiencies that vary by as much as a factor of ~6 for orthogonal polarizations. Focal lengths of primary and secondary foci are shown to compare well with theory.     

菲涅尔区板天线赋形波束的最优逼近

从赋形波束最优逼近的观点入手，应用加权余量法和Prony法，研究基于直线阵列激励方式及其阵元空间分布的优化设计，从而实现菲涅尔区板天线辐射波束及焦区场分布的最佳数值逼近技术。所用方法适合于对各种菲涅尔区聚焦结构物理赋形波束的最优逼近，相关研究一方面对于设计高性能的直线阵列天线具有重要的参考价值，另一方面，对于进一步深入研究菲涅尔区聚焦结构的工作机理具有理论指导意义。     

基于菲涅耳波带板扫描全息术的光学层析成像

基于光学扫描全息术原理和编码孔径层析成像技术,提出了一种三维物体层析成像技术——菲涅耳波带板扫描全息术。该技术通过将物体的光强分布函数与菲涅耳波带板的光强分布函数进行卷积运算来得到物体的扫描全息图,通过相关解卷积的方法来进行扫描全息图的数字重建。依据该技术原理设计了实验系统,系统结构简单紧凑,具有三维物体层析成像功能。提出用数字高通滤波器来减少重建图像的背景噪声。计算机仿真及对实物的扫描记录和重建实验结果表明,该技术原理正确,用于三维物体层析成像是可行的,用数字高通滤波的方法提高重建图像的对比度是有效的。     

A Combined Phase Type Optical Element for Realizing Multiple Images

In this paper we introduce a new phase type combined optical element. The element is combined with Dammann grating and Fresnel zone plate in the same substrate by microelectronics technique, hence it has splitting functions of the Dammann grating and self-focusing function of the Fresnel plate. It can produce uniform multiple images by itself. We experimentally designed and fabricated an 9x9 multiple image element, and results show that the element can realize the multiple images we require and the intensity of each image is the same. Relative error is less than 5%.     

Design and application of phase photon sieve

The imaging principle of Fresnel zone plate and photon sieve were analyzed in this paper. The design and fabrication of phase photon sieve were discussed. The feasibility of using phase photon sieve to realize nano-lithography was analyzed, a novel lithography experiment system based on phase photon sieve was presented, which not only has higher resolution and image contrast than the Fresnel zone plate lithography but also have higher diffractive efficiency than the amplitude photon sieve lithography.     

Spectral-domain optical coherence tomography with a Fresnel spectrometer

We propose a novel spectral-domain optical coherence tomography (SD-OCT) equipped with a Fresnel spectrometer, which utilizes a Fresnel zone plate (FZP) as both dispersion and focusing optics and thus spreads the spectral interferogram evenly in wavenumber domain because of the proportional relation between the focal length of the FZP and the wavenumber. With no need of the conversion calculation from wavelength to wavenumber in conventional SD-OCT, this new design is favorable for fast imaging with high resolution. As only a FZP and CCD are used, the Fresnel spectrometer is simple and compact. It is experimentally shown that its performance is as good as that of numerical interpolation in conventional SD-OCT. Imaging of bio-tissue by Fresnel SD-OCT is also demonstrated.     

X射线布拉格-菲涅耳光学元件的实验研究

用光学全息方法在涂有光刻胶的多层膜表面上的形成布拉格－菲涅耳元件所需的波带片图形,通过离子束刻蚀方法将波带片图形转写到多层膜上,完成元件的制作,给出布拉格－菲涅耳光学元件测量结果,测量结果表明上述方法适于制作布拉格－菲涅耳元件。     

Nanometer linear focusing of hard x rays by a multilayer Laue lens

We report on a type of linear zone plate for nanometer-scale focusing of hard x rays, a multilayer Laue lens (MLL), produced by sectioning a multilayer and illuminating it in Laue diffraction geometry. Because of its large optical depth, a MLL spans the diffraction regimes applicable to a thin Fresnel zone plate and a crystal. Coupled wave theory calculations indicate that focusing to 5 nm or smaller with high efficiency should be possible. Partial MLL structures with outermost zone widths as small as 10 nm have been fabricated and tested with 19.5 keV synchrotron radiation. Focal sizes as small as 30 nm with efficiencies up to 44% are measured.     

Zone-doubling technique to produce ultrahigh-resolution x-ray optics

A method for the fabrication of ultrahigh-resolution Fresnel zone plate lenses for x-ray microscopy is demonstrated. It is based on the deposition of a zone plate material (Ir) onto the sidewalls of a prepatterned template structure (Si) using an atomic layer deposition technique. This results in a doubling of the effective zone density, thus improving the achievable resolution of x-ray microscopes. Test structures with lines and spaces down to 15 nm were resolved in a scanning transmission x-ray microscope at 1 keV photon energy.