Electrostatic interaction between ion-penetrable membranes in a salt-free medium

A set of coupled equations is given which determines the distributions of the electric potential and counterions in a system of two interacting identical ion-penetrable membranes of thickness d at separation h immersed in a salt-free medium containing only counterions. The solution to these coupled equations also gives the electrostatic repulsive force between the membranes. It is shown that the interaction force remains finite at h-->0, unlike the case of the interaction between two planar charged surfaces (d-->0), and that the interaction force becomes independent of the membrane fixed charge and membrane thickness d at very large h. Finally, an approximate single transcendental equation giving the solution to the coupled equations is derived.     

Double-layer interaction between parallel solid cylinders partially immersed in an oil/water interface

We consider two identical, parallel, infinitely long solid cylinders at a given separation, lying flat on a plane oil/water interface and both immersed to the same extent in the oil and water phases. The part of the surface of each cylinder in contact with the aqueous phase is charged, forming an electric double layer in a symmetrical aqueous binary electrolyte. The electrical potential in the overlapping electric double layers in the aqueous phase satisfies the Poisson-Boltzmann equation. The potentials within the uncharged interiors of the solid cylinders and in the oil phase satisfy Laplace's equation. The equations for the three potentials are solved simultaneously using the finite element method with Galerkin weighted residuals. The double-layer interaction per unit length of the cylinders is then calculated. Of the numerical results obtained, three deserve special mention. First, a short-range double-layer repulsion, decaying exponentially with separation between the two cylinders, acts through the aqueous electrolyte medium, whereas in the case of an uncharged oil/water interface a weaker, but much longer-ranging, repulsive interaction acts through the oil medium. Second, reasonable estimates of the short-range interaction between cylinders in a planar interface can be obtained from the Derjaguin approximation for thin double layers. Third, in addition to the repulsive force between the cylinders parallel to the oil/water interface, a force normal to the interface acts on the cylinders in the direction of the aqueous electrolyte phase.     

Statistical thermodynamics approach for estimation of the interaction parameters in the mixed Langmuir films at the water/air interface

The treatment of two-dimensional system of three components of molecules of different molecular sizes, adapted from statistical thermodynamics, is used to derive parameters which could be derive parameters which could be related to the interaction between molecules in the mixed Langmuir films formed at the water/air interface.     

Adsorption kinetics of some carotenoids at the oil/water interface

The kinetic analysis of the adsorption of two carotenoids (i.e., ethyl ester of β-apo-8′-carotenoic acid and β-carotene, all trans-isomers) from n-hexane solutions at the oil/water interface is presented for several carotenoid concentrations in the oil phase. A new kinetic approach is developed and it addresses the diffusion adsorption associated with a reversible interfacial reaction, which describes the reorientation of surfactant molecules between two conformations. This approach leads to a general analytical expression that contains four physical parameters and describes with high accuracy the experimental dynamic interfacial tensions for the two carotenoids, which independently adsorb from n-hexane phase to the n-hexane/water interface. The calculations give the characteristic times for the carotenoid adsorption at the oil/water interface in terms of diffusion relaxation and kinetic relaxation times. The results explain the long time effects on the adsorption of these carotenoids at the oil/water interface. The data are in substantial agreement with the molecular structure of these carotenoids and with the earlier data recorded for cholesterol adsorption at the n-heptane/water interface. Based on these findings, we propose a molecular mechanism for the interfacial transformation of carotenoid molecules at a hydrophobic/hydrophilic interface.     

Molecular dynamics simulation of four typical surfactants at oil/water interface

In the present study, we have performed molecular dynamics simulations to describe the microscopic behaviors of the anionic, nonionic, zwitterion, and gemini surfactants at oil/water interface. The abilities of reducing the interfacial tension and forming the stable interfacial film of the four surfactants have been investigated through evaluating interfacial thickness, interface formation energy and radial distribution function. The results show that the four kinds of surfactants can form in stable oil/water interface of monolayer, and the gemini surfactant can form the more stable monolayer. The results of the above three parameters demonstrate that the gemini surfactant has the best simulation effect in the four surfactants. From the calculated interfacial tension values, the gemini surfactant possess the more powerful ability of reducing the interfacial tension than others, so it is more suitable to be used as the surfactant for flooding. In addition, the effects of different electric field intensities on surfactants were calculated, through the radial distribution function of the hydrophilic group in the surfactant and the oxygen atom in the water. We have found that the adding of the periodic electric field can significantly affect the diffusion behavior of the molecules, and nonionic surfactant has stronger demulsification capability than others.     

Emergence of a thread-like pattern with charged phospholipids on an oil/water interface

The spontaneous formation of a thread-like pattern with negatively charged lipids on an oil/water interface is reported. An analysis of the time-dependent change at the interface observed by fluorescence microscopy revealed that the thread-like pattern is generated through a two-step mechanism. First, inverted lipid micelles in the bulk-oil phase gradually diffuse onto the oil/water interface. Next, the micelles are adsorbed on the interface and self-assemble to form the thread-like pattern. The essential characteristics of this pattern formation are theoretically reproduced by a simple Monte Carlo simulation that takes into account the kinetics in the coalescence of charged micelles on a 2D interface.     

Polymer/surfactant interactions at the air/water interface

The development of neutron reflectometry has transformed the study and understanding of polymer/surfactant mixtures at the air/water interface. A critical assessment of the results from this technique is made by comparing them with the information available from other techniques used to investigate adsorption at this interface. In the last few years, detailed information about the structure and composition of adsorbed layers has been obtained for a wide range of polymer/surfactant mixtures, including neutral polymers and synthetic and naturally occurring polyelectrolytes, with single surfactants or mixtures of surfactants. The use of neutron reflectometry together with surface tensiometry, has allowed the surface behaviour of these mixtures to be related directly to the bulk phase behaviour. We review the broad range of systems that have been studied, from neutral polymers with ionic surfactants to oppositely charged polyelectrolyte/ionic surfactant mixtures. A particular emphasis is placed upon the rich pattern of adsorption behaviour that is seen in oppositely charged polyelectrolyte/surfactant mixtures, much of which had not been reported previously. The strong surface interactions resulting from the electrostatic attractions in these systems have a very pronounced effect on both the surface tension behaviour and on adsorbed layers consisting of polymer/surfactant complexes, often giving rise to significant surface ordering.     

Spreading of partially crystallized oil droplets on an air/water interface

The influence of crystalline fat on the amount and rate of oil spreading out of emulsion droplets onto either a clean or a protein-covered air/water interface was measured for β-lactoglobulin stabilized emulsions prepared with either anhydrous milk fat or a blend of hydrogenated palm fat and sunflower oil. At a clean interface, liquid oil present in the emulsion droplets was observed to completely spread out of the droplets unimpeded by the presence of a fat crystal network. Further, the presence of a fat crystal network in the emulsion droplets had no effect on the rate of oil spreading out of the droplets. At a protein-covered interface, the spreading behavior of emulsion droplets containing crystalline fat was evaluated in terms of the value of the surface pressure (Π_AW) at the point of spreading; Π_AW at spreading was unaffected by the presence of crystalline fat. We conclude it is unlikely that the role of crystalline fat in stabilizing aerated emulsions such as whipped cream is to reduce oil spreading at the air/water interface. However, the temperature of the system did have an effect: spontaneous spreading of emulsion droplets at clean air/water interfaces occurred for systems measured at 5 °C, but not for those measured at 22 or 37 °C. Thus, temperature may play a more important role in the whipping process than commonly thought: the entering and spreading of emulsion droplets was favored at lower temperatures because the surface pressure exerted by protein adsorbed at the air/water interface was reduced. This effect may facilitate the whipping process.     

Molecular dynamics study of the water/n-alkane interface

Molecular dynamics simulations on the interface between liquid water and liquid n-alkane (including octane, nonane, decane, undecane and dodecane) have been performed with the purpose to study the interfacial properties: (Ⅰ) density profile; (Ⅱ) molecular orientation; (Ⅲ) interfacial tension and the temperature effect on the interfacial tension. Simulation results show that at the interface the structures of both water and n-alkane are different from those in the bulk. Water has an orientational preference ...     

Adsorption at the air/water interface in dodecylammonium chloride/sodium dodecyl sulfate mixtures

The composition and properties of the adsorption films of dodecylammonium chloride/sodium dodecyl sulfate at the air/water interface depend on interactions between the film molecules and equilibria in the bulk phase (monomer-micelle and/or monomerprecipitate equilibria).The negative value of surface molecular interaction parameter ^mon calculated using the regular solution theory indicates strong attractive interactions between adsorbed molecules. Electrostatic interactions between oppositely charged ionic head groups enhance the adsorption of surfactants and decrease the minimum molar area of surfactant molecules at the air/water interface. The addition of an oppositely charged surfactant enhances packing at the air/water interface and transition from a liquid expanded to a liquid condensed state. Surface potential measurements reveal positive values for the mixtures investigated, implying the cationic surfactant ions are closer to the surface than the anionic ones.     

Aggregate formation in oil and adsorption at oil/water interface: thermodynamics and its application to the oleyl alcohol system

The thermodynamic equations for examining aggregate formation in an oil phase and adsorption at the oil/water interface of a nonionic solute were derived. The total differentials of chemical potentials of species and the oil/water interfacial tension were expressed as functions of temperature, pressure, and the total concentration of solute in the oil phase after explicit consideration of aggregate formation. The partial derivatives of the chemical potentials and the interfacial tension with respect to the independent variables were found to provide the thermodynamic quantities of aggregate formation and adsorption from oil phase to the interface by introducing the concept of an ideally dilute associated solution. These equations were applied to the cyclohexane solution of oleyl alcohol/water system, and the adsorption and aggregate formation was examined.     

Charge transfer across the water/nitrobenzene interface by three-electrode system

A droplet of aqueous solution containing a certain molar ratio of redox couple is first attached onto a platinum electrode surface, then the resulting drop electrode is immersed into the organic solution containing very hydrophobic electrolyte. Combined with reference and counter electrodes, a classical three-electrode system has been constructed. Ion transfer (IT) and electron transfer (ET) are investigated systematically using three-electrode voltammetry. Potassium ion transfer and electron transfer between potassium ferricyanide in the aqueous phase and ferrocene in nitrobenzene are observed with potassium ferricyanide/potassium ferrocyanide as the redox couple. Meanwhile, the transfer reactions of lithium, sodium, potassium, proton and ammonium ions are obtained with ferric sulfate/ferrous sulfate as the redox couple. The formal transfer potentials and the standard Gibbs transfer energy of these ions are evaluated and consistent with the results obtained by a four-electrode system and other methods.     

Adsorption behavior of phospholipid vesicles at oil/water interfaces

By measuring the change in interfacial tension after adding phospholipid vesicles to an aqueous solution of electrolyte, we studied the adsorption behavior of phospholipid vesicles at oil/water interfaces. The effects of concentration of three kinds of electrolyte (NaCl, MgCl₂, LaCl₃) and of the mixing ratio of two kinds of phospholipids (phosphatidylcholine and phosphatidylserine), on the adsorption behavior at an oil/water interface were examined. The results were interpreted using the DLVO theory.     

Nanocomposite interface coupled with thickness optimization promoting water dissociation in heterogeneous bipolar membrane

Bipolar membranes (BPMs) are multilayered composite film containing an interface layer sandwiched between cation exchange layer (CEL) and anion exchange layer (AEL), and are capable of dissociating water molecules under reverse bias potential. Woven fabric supported heterogeneous bipolar membranes (HBMs) were synthesized adopting layer-by-layer solvent casting technique. Nanocomposite layer based on sulfonated polyether ether ketone (SPEEK) and GO (graphene oxide) were applied at the interface of CEL/AEL made of cation/anion exchange resins and poly (vinyl chloride) as binder to advance water dissociation in HBMs. Thickness of monopolar layers were initially optimized without any interfacial layer. Introduction of SPEEK interface substantially lowered onset water dissociation potential, U_diss (~1.87 V) relative to the HBM without interface (~3.27 V), which got further reduced (~1.80 V) by nanocomposite (GO + SPEEK) interface. U_diss recorded with SPEEK + GO as interface was much lower than some of the recently reported homogeneous BPM. The NaOH production from NaCl (1.0 mol?L^?1) solution in a bipolar membrane electrodialysis set up containing synthesized HBM with nanocomposite interface (SPEEK + GO) was double than that of NaOH concentration obtained with HBM having no interface, where the current density was fixed at 50.0 mA·cm^?2. Careful optimization of monopolar/interface layer thickness and composition of nanocomposite interface results in developing cost effective HBMs facilitating water dissociation at lower potential.     

Crosslinked poly(ethylene oxide) fouling resistant coating materials for oil/water separation

Potential fouling reducing coating materials were synthesized via free-radical photopolymerization of aqueous solutions of poly(ethylene glycol) diacrylate (PEGDA). Crosslinked PEGDA (XLPEGDA) exhibited high water permeability and good fouling resistance to oil/water mixtures. Water permeability increased strongly with increasing the water content in the prepolymerization water mixture, going from 10 to 150 L μm/(m² h bar) as prepolymerization water content increased from 60 to 80 wt.%. However, molecular weight cutoff decreased as water content increased. These materials were applied to polysulfone (PSF) UF membranes to form coatings on the surface of the PSF membranes. Oil/water crossflow filtration experiments showed that the coated PSF membranes had water flux values 400% higher than that of an uncoated PSF membrane after 24 h of operation, and the coated membranes had higher organic rejection than the uncoated membranes.     

Interfacial tension of alkylglucosides in different APG/oil/water systems

The interfacial performance of pure alkylglucosides (C₈G₁, C₁₀G₁ and C₁₂G₁) and of technical grade alkylpolyglucoside (APG) surfactants was investigated in three different water/oil systems (decane, isopropylmyristate and 2-octyldodecanol). From the dependence of the interfacial tension on the surfactant concentration below the CMC the cross-sectional area of the molecules at the decane/water interface was estimated. The plateau values of the interfacial tension at the CMC _c are independent of temperature and almost independent of added electrolyte in the decane/water system. The ability of the surfactants to lower the oil/water interfacial tension is most pronounced for the nonpolar oil. The partition coefficient of the surfactant between oil and water phase (k _c) was estimated from the CMC and the observed break point of the interfacial tension after equilibration of the two phases. In decane/water,k _c is nearly zero for all surfactants studied. For the polar oils,k _c increases with the chain length of the surfactant up tok _c10 for C₁₂G₁ in octyldodecanol/water. The values of _c in the different oil/water systems appear to be correlated withk _c and exhibit a minimum neark _c=1.     

The interface air/water of n-dodecanephosphonic acid solutions

 The air/water interface of the system n-dodecanephosphonic acid (H₂DP)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. The combination of surface tension and ion-selective electrodes measurements enables to study the adsorption of soluble surfactants above the cmc using the Gibbs’ equation. H₂DP formed a nonideal monolayer at the air/water interface with A _molec=0.995 nm² below the cmc. Above the cmc there was a reduction in adsorption giving A _molec=6.32 nm², which remained almost constant in the explored concentration range. This adsorption reduction may be due to a change composition on micellization, or to a thermodynamic advantage of micellization on adsorption. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by the presence of solutes in bulk. This is because the strong changes in the surface coverage did not have significant influence on the evaporation rate. Received: 6 January 1997 Accepted: 15 August 1997     

Robust superhydrophobic surface fabrication by fluorine-free method on filter paper for oil/water separation

Robust superhydrophobic surface exhibiting anti-fouling and self-cleaning ability were successfully fabricated by nano TiO2 modified by γ-aminopropyltriethoxysilane (KH550) and polydimethylsiloxane (PDMS) via wire rod coating. Due to the lower surface energy of PDMS and the hierarchical structure caused by the different aggregation sizes of TiO2 nanoparticles, the contact angle of the resulting superhydrophobic coating was 154.5° and the rolling angle was 3.5°. And the coated paper still had good non-wettability under water immersion. In addition, the coated paper was tolerant to mechanical damage and various temperature conditions. Even after 40 sandpaper wear cycles, the coating can still maintain good mechanical stability and superhydrophobicity. The superhydrophobic paper was used for oil-water separation, the separation efficiency was about 98% even after used 10 times. Furthermore, the prepared superhydrophobic paper exhibited excellent self-cleaning and anti-fouling properties, as well as demonstrated superb resistance to various water solutions owing to its high hydrophobicity. Moreover, the prepared superhydrophobic paper has application prospects in the industry of special wetting materials.     

The Use of Diamond Electrodes in the Interface Biodiesel/Water

A boron‐doped diamond electrode was used at the interface of biodiesel and water in conjunction with square‐wave voltammetry to promote the detection of a model molecule (ferrocene). The addition of LiClO₄ to the oil phase increased the detection of ferrocene five‐fold as compared with an unsupported oil phase. A cathodic surface pretreatment of the BDD electrode caused no oscillation of currents and promoted a high stability within the system. Our successful use of this system suggests the possibility for its application in the analysis of other contaminants within biodiesel including liposoluble pesticides and glycerol.     

Study of the dynamic interfacial tension at the oil/water interface

A review is given on three recently developed methods to measure the dynamic interfacial tension at the oil/water interface. These are respectively the dynamic drop volume method, the dynamic capillary method, and the (reversed) funnel method. For each method presented the basic principles are described and a few experimental results are given.Paper presented at the 7th International Conference on Surface Active Substances (Bad-Stuer, DDR, 25–30. April 1988).