Adsorption of TTF,TCNQ and TTF-TCNQ on Au(111): An <Emphasis Type="Italic">in situ</Emphasis> ECSTM study

The adsorption and adlayer structures of tetrathiofulvalene (TTF), tetracyanoquinodimethane (TCNQ) and TTF-TCNQ on Au(111) have been systematically investigated by in situ electrochemical scanning tunneling microscopy (ECSTM) and cyclic voltammetry in 0.1 mol L⁻¹ HClO₄. All the three molecules were found to form well-ordered adlayers in the double-layer potential region of Au(111). For TTF and TCNQ adlayers, (6×3) and (4×7) structures have been observed, respectively. A structural transition was observed on TCNQ adlayer at potential negative of 0.08 V vs. the reversible hydrogen electrode (RHE), and induced a new phase with (3 × 12) structure. On the other hand, the charge transfer complex, TTF-TCNQ, self-organized into ordered domains with a lamellar structure different from those of the pure TTF and TCNQ adlayers on Au(111). Its packing arrangement was comparable to surface structures of either single crystal or thin film of TTF-TCNQ. Supported by the National Natural Science Foundation of China (Grant Nos. 20673121, 20733004 & 20821003), the National Key Project for Basic Research (Grant Nos. 2006CB806101 & 2006CB932100) and Chinese Academy of Sciences     

金属-有机配合物分子在Au(111)表面的吸附行为

用STM对含氧桥的金属-有机配合物[Cu₂(μ-O)(dptap)4(NO₃)₂]分子在Au(111)表面的吸附行为进行了研究. STM结果表明, 该分子同时存在非解离吸附和解离吸附, 大部分分子在Au(111)面形成有规则的排列, 少量分子发生解离吸附, 并形成(√3×√3)R30°Cu原子吸附结构. 探讨了两种吸附现象共存的起因.     

Decorated Ru/Au(111) and Os/Au(111) surfaces: An in situ STM and electrochemistry study

The structure and reactivity of bimetallic electrodes obtained by spontaneous deposition of Ru and Os on Au(111) single-crystal surfaces are studied. In situ electrochemical STM and cyclic voltammetry are used to characterize a wide range of surface morphologies thus produced. The STM results on Ru/Au(111) demonstrate a pronounced step decoration, while a random distribution of Ru nuclei, quite uniform in size, occurs on terraces. Osmium deposits show a slight preference for deposition on steps, but it also occurs readily on terraces. However, many of the Os islands grow into multilayer heights. The coverage of the Au(111) by the deposited Ru or Os islands for a particular solution concentration depends on the deposition time. Nanostructures of Ru and Os are tested for catalytic behavior and correlated to CO oxidation activity as measured by CO stripping voltammetry. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 11, pp. 1385–1392. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

Ordered arrays of semi-crown ligands on an Au(111) electrode surface: in situ STM study

Self-organized systems have attracted much at-tention due to their potential applications in nano- technology as a bottom-up?approach for the con-struction of molecule-scale devices and nanostruc-tures[1—4]. Beyond the self-assembly of small molecu-lar building blocks, Schnherr et al. recently suc-ceeded in arranging the rosette supramolecular nanos-tructures in two dimensions on HOPG[5,6]. Moreover, interest has tremendously increased in the su-pramolecular structures via coordination-dr…     

Au(111)面甲烷硫醇吸附的密度泛函理论研究

采用基于密度泛函理论的第一性原理方法和平板模型研究了CH₃SH分子在Au(111)表面的吸附构型和电子结构. 系统地计算了S原子在不同位置以不同方式吸附的系列构型, 计算结果表明, CH₃SH分子倾向于吸附在top位上, S-C键相对于Au表面法线的夹角为62°～78°|而S-H键断裂后CH₃S_H则倾向于吸附在bri-fcc位上, S-C键相对于Au(111)表面法线的夹角为49°～57°. 比较分析CH₃SH分子和CH₃S_H的吸附, 发现CH₃SH分子倾向于不解离吸附, 表面温度的提升和缺陷的出现可能促使S-H键的断裂. 通过比较S原子在独立的CH₃SH分子和吸附状态下的局域态密度, 发现S-H键断裂后S原子和表面的键合强于S-H键未断裂时S原子和表面的键合. 扫描隧道显微镜(STM)图像模拟显示了CH₃SH和CH₃S_H在Au(111)表面吸附的3个典型的STM图像.     

Schiff碱N-aete-N在Au(111)上自组装单分子膜的电化学及STM研究

利用电化学技术及扫描隧道显微镜(STM),于0.1mol/LHClO₄溶液中研究了Schiff碱N-aete-N在单晶Au(111)面上所形成的自组装单分子膜(SAMs)的电化学性质及结构.N-aete-N在Au(111)电极表面的吸附抑制了金的阳极氧化,同时使固/液界面双层电容明显降低.观察到N-aete-NSAMs的高分辨STM图像.N-aete-N分子在Au(111)表面上以(6×7)结构单胞呈二维有序排列,其表面浓度为5.5×10^-11mol/cm².     

Electrochemical Studies of the Benzoate Adsorption on Au (111) Electrode

Cyclic voltammetry (CV), differential capacity (DC), and charge densitymeasurements have been employed to study the benzoate (BZ) adsorption at the Au(111)electrode surface. Thermodynamic analysis of charge density (_M) data has beenperformed to describe the properties of the adsorbed benzoate ion. The Gibbsexcess , Gibbs energy of adsorption G, and the number of electrons flowingto the interface per adsorbed benzoate ion at a constant potential (electrosorptionvalency) and at a constant bulk concentration of the benzoate (reciprocal of theEsin—Markov coefficient) have been determined. The results demonstrate thatalthough benzoate adsorption starts at negative charge densities, it takes placepredominantly at a positively charged surface. At the most positive potentials,the surface concentration of benzoate attains a limiting value of about 7.3×10^–10mol-cm^–2, which is independent of the bulk benzoate concentration. This valueis consistent with packing density corresponding to a closed-packed monolayerof vertically adsorbed benzoate molecules. At negative charge densities, benzoateassumes a flat (-bonded) surface coordination. The surface coordination ofbenzoate changes, by moving from a negatively to positively charged surface.At the negatively charged surface, the electrosorption bond is quite polar. Thepolarity of the chemisorption bond is significantly reduced due either to a chargetransfer or a screening of the charge on the anion by the charge on the metal.     

Comparing Ullmann Coupling on Noble Metal Surfaces: On‐Surface Polymerization of 1,3,6,8‐Tetrabromopyrene on Cu(111) and Au(111)

The on‐surface polymerization of 1,3,6,8‐tetrabromopyrene (Br₄Py) on Cu(111) and Au(111) surfaces under ultrahigh vacuum conditions was investigated by a combination of scanning tunneling microscopy (STM), X‐ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. Deposition of Br₄Py on Cu(111) held at 300 K resulted in a spontaneous debromination reaction, generating the formation of a branched coordination polymer network stabilized by C?Cu?C bonds. After annealing at 473 K, the C?Cu?C bonds were converted to covalent C?C bonds, leading to the formation of a covalently linked molecular network of short oligomers. In contrast, highly ordered self‐assembled two‐dimensional (2D) patterns stabilized by both Br?Br halogen and Br?H hydrogen bonds were observed upon deposition of Br₄Py on Au(111) held at 300 K. Subsequent annealing of the sample at 473 K led to a dissociation of the C?Br bonds and the formation of disordered metal‐coordinated molecular networks. Further annealing at 573 K resulted in the formation of covalently linked disordered networks. Importantly, we found that the chosen substrate not only plays an important role as catalyst for the Ullmann reaction, but also influences the formation of different types of intermolecular bonds and thus, determines the final polymer network morphology. DFT calculations further support our experimental findings obtained by STM and XPS and add complementary information on the reaction pathway of Br₄Py on the different substrates.     

Adsorption of multivalent alkylthiols on Au(111) surface: Insights from DFT

The adsorption of multivalent thiols on gold (111) surface was investigated using density functional theory applying the Perdew–Burke–Ernzerhof functional. Through the comparison of differences in energetics, structure and charge density distribution of a set of monodentate and polydentate thiols, we have described in detail the factors affecting the adsorption energy and the role played by the multivalence, which causes a decreasing of adsorption energy because of both electronic and steric hindrance effects. Finally, the comparison between the adsorption of 1,2‐ and 1,3‐disulfides revealed how the chain length may affect the cleavage of the S? S bond when they adsorb on Au(111) surface. © 2013 Wiley Periodicals, Inc.     

ECSTM study of adsorption of C60, C70, C86 and Y@C82 on Au(111)

The adsorption of a variety of fullerenes (C₆₀, C₇₀, C₈₆, Y@C₈₂) on Au(111) electrode surfaces was comprehensively investigated in 0.1 M HClO₄ by electrochemical scanning tunneling microscopy (ECSTM). In the ordered C₆₀’s adlayer, C₆₀ molecules formed either (2 $ \sqrt 3 $ ×2 $ \sqrt 3 $ ) or “in-phase” structure. The high resolution STM image shows that the C₆₀ cage is not simply round but shows a bifurcated feature. The adsorption orientation of C₆₀ on Au(111) is tentatively suggested. In the ordered C₇₀’s adlayer, the perpendicular fullerene molecules are the main adsorption mode and form (2 $ \sqrt 3 $ ×2 $ \sqrt 3 $ ) structure. However, for C₈₆ and Y@C₈₂, the ordered adlayer could not be obtained on Au(111) under the present condition. These differences may be due to the different molecular shapes and sizes, and the encapsulated metal atom which affects the lattice matches with the substrate. The adsorption of fullerene molecules on Au(111) from disorder to order could be tuned simply by steering the dimensional sizes or shapes of the fullerenes used.     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

氧化锌有序结构在Au(111)和Cu(111)上的生长

利用NO₂或O₂作为氧化剂,研究了氧化锌在Au(111)和Cu(111)上的生长和结构。NO₂表现了更好的氧化性能,有利于有序氧化锌纳米结构或薄膜的生长。在Au(111)和Cu(111)这两个表面上,化学计量比氧化锌都形成非极性的平面化ZnO(0001)的表面结构。在Au(111)上,NO₂气氛下室温沉积锌倾向于形成双层氧化锌纳米结构;而在更高的沉积温度下,在NO₂气氛中沉积锌则可同时观测到单层和双层氧化锌纳米结构。O₂作为氧化剂时可导致形成亚化学计量比的ZnO_x结构。由于铜和锌之间的强相互作用会促进锌的体相扩散,并且铜表面可以被氧化形成表面氧化物,整层氧化锌在Cu(111)上的生长相当困难。我们通过使用NO₂作为氧化剂解决了这个问题,生长出了覆盖Cu(111)表面的满层有序氧化锌薄膜。这些有序氧化锌薄膜表面显示出莫尔条纹,表明存在一个ZnO和Cu(111)之间的莫尔超晶格。实验上观察到的超晶格结构与最近理论计算提出的Cu(111)上的氧化锌薄膜结构相符,具有最小应力。我们的研究表明,氧化锌薄膜的表界面结构可能会随氧化程度或氧化剂的不同而变化,而Cu(111)的表面氧化也可能影响氧化锌的生长。当Cu(111)表面被预氧化成铜表面氧化物时,ZnO_x的生长模式会发生变化,锌原子会受到铜氧化物晶格的限域形成单位点锌。我们的研究表明了氧化锌的生长需要抑制锌向金属基底的扩散,并阻止亚化学计量比ZnO_x的形成。因此,使用原子氧源有利于在Au(111)和Cu(111)表面上生长有序氧化锌薄膜。     

甲醇在Au(111)表面吸附的密度泛函研究

 采用基于第一性原理的密度泛函理论和周期平板模型相结合的方法,对CH3OH分子在Au(111)表面top, fcc, hcp和bridge位的吸附模型进行了构型优化、能量计算以及Mulliken布居分析,结果表明top位是较有利的吸附位. 吸附的CH3OH解离产生甲氧基CH3O和H, 对它们在Au(111)面的吸附进行的计算表明, bridge和fcc位分别是二者的最佳吸附位. 对过渡态的计算给出了CH3OH在Au表面解离吸附的可能机理: 首先发生 O-H 键的断裂,继而生成甲氧基中间体.     

DPA(TCNQ)2的烧孔阈值电压对脉宽的依赖关系

合成了一种新的二元电荷转移复合物DPA(TCNQ)2（二丙胺-7,7,8,8-四氰基对亚甲基苯醌)，并得到了其单晶ab面的STM高分辨图像，表面晶格常数与体相晶格常数的XRD数据完全一致.用STM成功地写入了5×5的信息点阵，并在5.1 μm×5.1 μm的面积上写入更大规模的信息点阵，写入的可靠性和稳定性都很高.实验发现，烧孔阈值电压强烈依赖于脉宽,这一现象不支持场致蒸发的机理.理论分析表明，它支持热化学烧孔的机理.     

Atomic structures and dynamics of a Cu(100) electrode in dilute hydrobromic acid: An in situ STM study

The surface electrochemistry of Cu(100) in 10 mM hydrobromic acid electrolyte has been studied by means of cyclic voltammetry and in situ STM. In the potential range between the onset of the anodic copper dissolution at positive and the hydrogen evolution at negative electrode potentials, the CV of Cu(100) in 10 mM HBr is characterized only by the double-layer charge. Within this potential regime a highly ordered (√2×√2)R45°-superstructure is seen in the STM experiments assigned to specifically adsorbed bromide anions. No desorption of the bromide adlayer has been found in these STM experiments even at extremely negative potentials at the onset of hydrogen evolution. Therefore the bromide desorption potential is concluded to lie within the potential regime of massive hydrogen evolution at even more negative potentials. Adsorbed bromide induces a drastic restructuring and faceting of the surface topography depending on the applied potential. The driving force of this process is the formation of thermodynamically favored copper steps aligned parallel to close packed 100 directions of the bromide adsorbate. Dynamic processes like copper dissolution and deposition are also strongly influenced by the geometry of the (√2×√2)R45° bromide adlayer. Corrosion as well as deposition of copper material follows the close packed 100 directions of the bromide adsorbate. For moderate reaction rates an additional anisotropy between the [001]- and [010]-direction is observed due to the nonequivalence of two different kinds of bromide stabilized copper steps. The origin of these two kinds of steps is the phase relation of close packed adsorbate rows of adjacent terraces. The deposition of copper material does not only start at the lower but unusually, also at the upper sites of step edges leading to the formation of microfacets. Not only the growth of monoatomically high islands is observed but also a double-layer and multilayer growth of copper.     

Adsorption and in situ scanning tunneling microscopy of cysteine on Au(111): Structure, energy, and tunneling contrasts

The amino acid L-cysteine (Cys) adsorbs in highly ordered (3 square root of 3 x 6) R30 degrees lattices on Au(111) electrodes from 50 mM ammonium acetate, pH 4.6. We provide new high-resolution in situ scanning tunneling microscopy (STM) data for the L-Cys adlayer. The data substantiate previous data with higher resolution, now at the submolecular level, where each L-Cys molecule shows a bilobed feature. The high image resolution has warranted a quantum chemical computational effort. The present work offers a density functional study of the geometry optimized adsorption of four L-Cys forms-the molecule, the anion, the neutral radical, and its zwitterion adsorbed a-top-at the bridge and at the threefold hollow site of a planar Au(111) Au12 cluster. This model is crude but enables the inclusion of other effects, particularly the tungsten tip represented as a single or small cluster of W-atoms, and the solvation of the L-Cys surface cluster. The computational data are recast as constant current-height profiles as the most common in situ STM mode. The computations show that the approximately neutral radical, with the carboxyl group pointing toward and the amino group pointing away from the surface, gives the most stable adsorption, with little difference between the a-top and threefold sites. Attractive dipolar interactions screened by a dielectric medium stabilize around a cluster size of six L-Cys entities, as observed experimentally. The computed STM images are different for the different L-Cys forms. Both lateral and vertical dimensions of the radical accord with the observed dimensions, while those of the molecule and anion are significantly more extended. A-top L-Cys radical adsorption further gives a bilobed height profile resembling the observed images, with comparable contributions from sulfur and the amino group. L-Cys radical a-top adsorption therefore emerges as the best representation of L-Cys adsorption on Au(111).     

A first principle study of the structural,vibrational and electronic properties of tetrathiafulvalene adsorbed on Ag(110) and Au(110) surfaces

We have studied the adsorption properties of a charge donor organic molecule, tetrathiafulvalene (TTF), on the (110) surfaces of silver and gold by means of the generalized gradient approach of the density functional theory using periodic slab models. This molecule is the core building block of a host of molecular materials exhibiting extremely reach phase diagrams with a variety of ground states. The interfaces formed with metallic surfaces have received only limited attention, despite of their relevance. We have determined the stable adsorption sites for two unit cells representing high and low coverage, which are determinant for the adsorption properties of TTF on the surface. The preferential chemisorption is via the direct interaction of sulfur atoms with the Ag or Au atoms on top sites. All adsorbed TTF are more stable than gas phase TTF. The simulation of the vibrational spectra has permitted us to find the fingerprints of these structures to characterize them on this surface. The donor nature of TTF induces charge transfer to the metallic surfaces. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

离子液体中Au(111)和Pt(111)表面Ge欠电位沉积的现场STM研究

本文研究BMIPF₆离子液体中Au(111)和Pt(111)表面Ge的电沉积行为. 循环伏安法测试结果表明,在含0.1 mol·L^-1 GeCl₄的BMIPF₆溶液Au(111)和Pt(111)表面均有两个与Ge沉积过程相关的还原峰. 第一个还原峰包含了Ge⁴⁺还原成Ge²⁺及Ge的欠电位沉积,第二个还原峰对应Ge的本体沉积. 现场扫描隧道显微镜研究结果表明,Ge在Au(111)和Pt(111)表面均有两层欠电位沉积. 第一层欠电位沉积厚度约为0.25 nm、形貌平整、带有缝隙的亚单层结构. 第二层欠电位沉积形貌相对粗糙的点状团簇结构. 该欠电位沉积过程伴随表面合金化.