Evaluation of a novel composite based on functionalized multi-walled carbon nanotube and iron phthalocyanine for electroanalytical determination of isoniazid

A novel platform for electroanalysis of isoniazid based on graphene-functionalized multi-walled carbon nanotube as support for iron phthalocyanine (FePc/f-MWCNT) has been developed. The FePc/f-MWCNT composite has been dropped on glassy carbon forming FePc/f-MWCNT/GC electrode, which is sensible for isoniazid, decreasing substantially its oxidation potential to +200 mV vs Ag/AgCl. Electrochemical and electroanalytical properties of the FePc/f-MWCNT/GC-modified electrode were investigated by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electrochemical microscopy, and amperometry. The sensor presents better performance in 0.1 mol L^?1 phosphate buffer at pH 7.4. Under optimized conditions, a linear response range from 5 to 476 μmol L^?1 was obtained with a limit of detection and sensitivity of 0.56 μmol L^?1 and 0.023 μA L μmol^?1, respectively. The relative standard deviation for 10 determinations of 100 μmol L^?1 isoniazid was 2.5%. The sensor was successfully applied for isoniazid selective determination in simulated body fluids.     

Amperometric determination of the insecticide fipronil using batch injection analysis: comparison between unmodified and carbon-nanotube-modified electrodes

The electrochemical oxidation of fipronil is investigated on unmodified and multi-walled carbon-nanotube (MWCNT)-modified glassy carbon electrodes (GCEs), and its amperometric determination using batch injection analysis (BIA) is demonstrated. An oxidation peak was observed at 1.5 V in a 0.1 mol L^?1 HClO₄/acetone solution (50:50, v/v) on both surfaces. Although MWCNT-modified GCE provided greater sensitivity, the unmodified GCE showed low RSD value, wider linear range, and reduced adsorption of fipronil or its oxidized products on the electrode surface. A detection limit of 4.7 μmol L^?1 and linear range of 25–300 μmol L^?1 were obtained using a bare GCE. The method was applied in veterinary formulations with results in agreement with those obtained by high-performance liquid chromatography.     

Voltammetric sensing of guanine and adenine using a glassy carbon electrode modified with a tetraoxocalix[2]arene[2]triazine Langmuir-Blodgett film

We have prepared a new voltammetric sensor for guanine and adenine. It is based on a glassy carbon electrode modified with a Langmuir-Blodgett film made from tetraoxocalix[2]arene[2]triazine. The direct electro-oxidation of adenine and guanine was investigated and the results indicat that in contrast to a bare glassy carbon electrode both guanine and adenine cause an increase in the oxidation peak currents along with a negative shift of the oxidation potentials. The electrode enables the simultaneous determination of guanine and adenine using square wave voltammetry. Analysis of acid denatured calf thymus DNA was carried out and the value of (G + C)/(A + T) was correctly found to be 0.75.

Sensitive detection of sulfanilamide by redox process electroanalysis of oxidation products formed in situ on glassy carbon electrode

This paper reported a simple method for sulfanilamide determination by redox process electroanalysis of oxidation products (SFDox) formed in situ on glassy carbon electrode. The CV experiments showed a reversible process after applied E _acc = + 1.06 V and t _acc = 1 s, in 0.1 mol L^?1 BRBS (pH = 2.0) at 50 mV s^?1. Different voltammetric scan rates (from 10 to 450 mV s^?1) suggested that the redox peaks of SFDox on the glassy carbon electrode (GCE) is an adsorption-controlled process. Square-wave voltammetry (SWV) method optimized conditions showed a linear response to SFD from 3.00 to 250.0 μmol L^?1 (R = 0.998) with a limit of detection of 0.638 μmol L^?1 and limit of quantification of 2.0 μmol L^?1. The developed the SWV method was successfully used in the determination of SFD pharmaceutical formulation and human serum. The SFD quantification results in pharmaceutical obtained by SWV-GCE were comparable to those found by official analytical protocols.     

Selective and low potential electrocatalytic oxidation of NADH using a 2,2-diphenyl-1-picrylhydrazyl immobilized graphene oxide-modified glassy carbon electrode

DPPH (2,2-diphenyl-1-picrylhydrazil), a free radical-containing organic compound, is used widely to evaluate the antioxidant properties of plant constituents. Here, we report an efficient electroactive DPPH molecular system with excellent electrocatalytic sensor properties, which is clearly distinct from the traditional free radical-based quenching mechanism. This unusual molecular status was achieved by the electrochemical immobilization of graphene oxide (GO)-stabilized DPPH on a glassy carbon electrode (GCE). Potential cycling of the DPPH adsorbed-GCE/GO between ??1 and 1 V (Ag/AgCl) in a pH 7 solution revealed a stable and well-defined pair of redox peaks with a standard electrode potential, E⁰′?=?0?±?0.01 V (Ag/AgCl). Several electrochemical characterization studies as well as surface analysis of the GCE/GO@DPPH-modified electrode by transmission electron microscopy, Raman, and infrared spectroscopy collectively identified the imine/amine groups as the redox centers of the electroactive DPPH on GO. The use of different carbon-supports showed that only oxygen-functionalized GO and MWCNTs could provide major electroactivity for DPPH. This highlights the importance of a strong hydrogen-bonded network structure assisted by the concomitant π-π interactions between the organic moiety and oxygen function groups of carbon for the high electroactivity and stability of the GCE/GO@DPPH-NH/NH₂-modified electrode. The developed electrode exhibited remarkable performance towards the electrocatalytic oxidation of NADH at 0 V (Ag/AgCl). The amperometric i-t sensing of NADH showed high sensitivity (488 nA μM^?1 cm^?2) and an extended linear range (50 to 450 μM) with complete freedom from several common biochemical/chemical interferents, such as ascorbic acid, hydrazine, glucose, cysteine, citric acid, nitrate, and uric acid.     

Electrochemical sensor for monitoring the photodegradation of catechol based on DNA-modified graphene oxide

We have immobilized DNA on a glassy carbon electrode (GCE) modified with graphene oxide (GO) to develop an electrochemical biosensor for catechol. Compared to carbon nanotubes, the use of GO dramatically improved the electrooxidative current of the guanine and adenine moieties in DNA but retained the low background current of unmodified GCEs. Factors such as DNA adsorption time, DNA concentration and pH of solution were investigated to optimize experimental conditions. In the presence of catechol, the voltammetric response to DNA was inhibited due to the interaction between DNA and catechol. The response to adenine is linearly proportional to the concentration of catechol in the range from 1.0?×?10^?6 to 1.0?×?10^?4 mol·L^?1. If catechol is degraded by the combined action of UV light and hydrogen peroxide, the response to DNA is restored. Thus, the modified electrode can act as an efficient biosensor for monitoring the degradation of catechol.

One-step preparation of sulfonated carbon and subsequent preparation of hybrid material with polyaniline salt: a promising supercapacitor electrode material

The present trend to increase the energy density of electrochemical supercapacitor is to hybrid the electrochemical double layer capacitance electrode materials of carbon with loading or encapsulation of transition metal oxide or conductive polymeric pseudocapacitor materials as the binary or ternary hybrid electrochemical active materials. In this work, we selected polyaniline salt-sulfonated carbon hybrid (PANI-SA?C _SA ) as a cheaper electrode material for supercapacitor electrode. Sulfonated carbon (C _SA ) was prepared from hydrothermal carbonization of furaldehyde and p-toluenesulfonic acid. Polyaniline-sulfate salt containing sulfonated carbon was prepared by chemical oxidative polymerization of aniline using ammonium persulfate in presence of sulfuric acid and sulfonated carbon via aqueous, emulsion and interfacial polymerization pathways. Formation of hybrid material was confirmed from scanning electron microscopy. Among the hybrid prepared with three different polymerization pathways, hybrid prepared by aqueous polymerization pathway showed better electrochemical performance. The specific capacitance of the hybrid prepared via aqueous polymerization was 600 F g^?1, which is higher than that of the pristine PANI-SA (350 F g^?1) and C _SA (30 F g^?1). Hybrid material was subjected for 8000 charge-discharge cycles and at 8000 cycles; it showed 88% retention of its original specific capacitance value of 485 F g^?1 with coulombic efficiency (97–100%). These results showed that C _SA micro spheres prevent the degradation of PANI-SA chains during charge/discharge cycles. Specific capacitance, cycle life, low solution resistance, low charge transfer resistance and high phase angle value of PANI-SA?C _SA supercapacitor cell indicates a higher performance supercapacitor system.

Open image in new window

Graphical abstract Synthesis of hybrid of sulfonated carbon with polyaniline sulfate salt and its supercapacitor performance Ravi Bolagam, Palaniappan Srinivasan,^* Rajender Boddula

     

A voltammetric immunoassay for the carcinoembryonic antigen using a self-assembled magnetic nanocomposite

The authors describe a voltammetric immunoassay for the carcinoembryonic antigen (CEA). It is based on the use of a self-assembled magnetic nanocomposite as multifunctional signal amplification platform. The core of the nanocomposite consists of Fe₃O₄ microspheres, and the shell of zirconium hexacyanoferrate loaded with gold nanoparticles (AuNPs@ZrHCF@Fe₃O₄). The material was synthesized by an electrostatic self-assembly process which is caused by the strong interaction between cyano groups and AuNPs. The surface of the Fe₃O₄ microspheres was functionalized with amino groups to facilitate the immobilization of ZrHCF which acts as an electron mediator. The nanocomposite was placed on a glassy carbon electrode which then displays noteworthy electrocatalytic activity toward the reduction of hydrogen peroxide (H₂O₂). The AuNPs serve as a support for the immobilization of antibodies by the interaction between AuNPs and amino groups on antibodies to construct a covalent Au-N bond. This facilitates electron transfer on the electrode surface using H₂O₂ as the electrochemical probe. Square wave voltammetry (measured typically at +0.2 V vs. SCE) was carried out to record the electrochemical behavior. Under the optimal conditions, a response is linear in the 0.5 pg·mL^?1 to 50 ng·mL^?1 CEA concentration range, and the detection limit is as low as 0.15 pg·mL^?1 (S/N =?3). The method is selective, highly stable and acceptably reproducible.

Open image in new window

Graphical abstract A self-assembly magnetic nanocomposite for voltammetric immunoassay of CEA. GCE glassy carbon electrode; Au NPs gold nanoparticles; ZrHCF zirconium hexacyanoferrate; CEA carcinoembryonic antigen; Anti-CEA CEA antibody; BSA bovine serum albumin; SWV square wave voltammetry. A high sensitive voltammetric immunoassay method has been used for detecting CEA, It is based on a self-assembled magnetic nanocomposite (Au NPs@ZrHCF@Fe₃O₄) as multifunctional signal amplification platform.

     

Square wave anodic stripping voltammetric determination of lead(II) using a glassy carbon electrode modified with a lead ionophore and multiwalled carbon nanotubes

We report on a glassy carbon electrode (GCE) modified with a lead ionophore and multiwalled carbon nanotubes. It can be applied to square wave anodic stripping voltammetric determination of Pb(II) ion after preconcentration of Pb(II) at ?1.0?V (vs. SCE) for 300?s in pH?4.5 acetate buffer containing 400?μg?L^?1 of Bi(III). The ionophore-MWCNTs film on the GCE possesses strong and highly selective affinity for Pb(II) as confirmed by quartz crystal microbalance experiments. Under the optimum conditions, a linear response was observed for Pb(II) ion in the range from 0.3 to 50?μg?L^?1. The limit of detection (at S/N?=?3) is 0.1?μg?L^?1. The method was applied to the determination of Pb(II) in water samples with acceptable recovery.

Enzymeless determination of cholesterol using gold and silver nanoparticles as electrocatalysts

We present the results of synthesis and study of the electrocatalytic activity of gold and silver nanoparticles of different composition (individual metals, core–shell particles, nanoalloys, and particles synthesized electrochemically), immobilized on the surface of a glassy carbon electrode, with respect to cholesterol. A surfactant (cetyltrimethylammonium bromide) is selected to create an aqueous–organic emulsion of cholesterol. It is demonstrated that nanoparticles with a gold core and a silver shell with the regression equation of I = 1.4 × 10^–5 c _chol + 5.8 × 10^–5 (R ² = 0.97) and silver nanoparticles synthesized electrochemically with the regression equation of I = 1.0 × 10^–5 c _chol + 3.0 × 10^–4 (R ² = 0.95) possess optimal electrocatalytic characteristics.     

Electrochemical Behavior of a Gold Electrode Modified with SWNTs/DDAB Films and Its Electrocatalytic Activity Towards Ascorbic Acid

A film of single-wall carbon nanotubes (SWNTs) and didodecyldimethylammonium bromide (DDAB) is prepared by casting a solution of SWNTs and DDAB onto the surface of a gold electrode. The electrochemical behavior of the film is investigated by electrochemical impedance spectroscopy and cyclic voltammetry. In a 0.10 M phosphate buffer solution of pH 7.0, the film-modified electrode gives a pair of redox peaks in cyclic voltamograms, with the anodic and cathodic peak potentials of 0.095 and 0.042 V. The peak currents change linearly with the scan rate at 30–500 mV/s. The modified electrode has an excellent electrocatalytic activity towards the oxidation of ascorbic acid (AA). The catalysis currents are proportional to the AA concentration in the range of 5.0 × 10⁻⁴ to 3.2 × 10⁻² M. The linear-regression equation is i (μA) = 1.2079 + 1.3987 × 10³ c _AA (M), with a correlation coefficient of 0.9995. The detection limit is 2.2 × 10⁻⁴ M (signal-to-noise ratio of 3). The Michaelis-Menten constant (K _m) is 1.0 × 10⁻⁴ M by the Lineweaver-Burk equation. __________ From Elektrokhimiya, Vol. 41, No. 10, 2005, pp. 1193–1199. Original English Text Copyright ? 2005 by Cheng, Jin, Zhang. The text was submitted by the authors in English.     

Electrochemical sensing of <Emphasis Type="SmallCaps">D</Emphasis>-penicillamine on modified glassy carbon electrode by using a nanocomposite of gold nanoparticles and reduced graphene oxide

A new electrochemical sensor was developed for determination of D-penicillamine using glassy carbon electrode which had been modified by gold nanoparticles–reduced graphene oxide nanocomposite (AuNPs/RGO/GCE) in aqueous solution. Cyclic voltammetry, transmission electron microscopy and electrochemical impedance spectroscopy were used for characterization of the modified electrode. The results indicated that the kinetic of oxidation reaction of D-penicillamine at the surface of the electrode was controlled by both diffusion and adsorption processes. In 0.1 mol L^?1 phosphate buffer (pH 2.0), the oxidation current increased linearly with concentration of D-penicillamine with a linear range of 5.0 × 10^?6 to 1.1 × 10^?4 mol L^?1 and regression coefficient of R ² = 0.9972. Theoretical detection limit, defined based on 3σ of the blank signal (n = 9) divided by the slope of the linear regression equation, was 3.9 × 10^?6 mol L^?1 D-penicillamine using differential pulse voltammetry. The developed method was successfully applied to the determination of D-penicillamine in pharmaceutical formulation and blood serum samples.     

Effect of the activation of a graphite-epoxy composite electrode and the buffer capacity of a solution on the reversibility of the hydroquinone electrode reaction

Peak potentials and the kinetics of hydroquinone oxidation at an electrode from a graphite-epoxy composite in activated and passivated states were studied in supporting electrolytes of different buffer capacities and pH varying from 0.1 to 8.8, using methods of direct-current and cyclic voltammetry. The electrode was activated before its polarization by mechanically cutting a 0.2–4-μm surface layer directly in a test solution. The electrode was passivated by storing in air for two or more days. The behavior of hydroquinone in its oxidation at the passivated and activated electrodes was compared using diagnostic criteria for the following functions: I _a?v ^1/2, logI _a?logv, I _a/v ^1/2?v ^1/2, and I _a/c, where v is the rate of the potential sweep and c is the volumetric concentration of hydroquinone. The potential difference of anodic and cathodic peaks in cyclic voltammograms indicated the reversibility of the electrode reaction in all supporting electrolytes.     

Single-Walled Carbon Nanotubes Functionalized with N-(6-aminohexyl) Carboxamide as Ionophore for Sensing Silver Ions

In this work; we constructed a silver ion-selective electrode based on N-(6-aminohexyl) carboxamide functionalized single-walled carbon nanotubes (NAHAFSWCN) as an ionophore. The selectivity constant of a number of cations was measured using silver ion selective electrode. Optimal pH was between 3 and 6 and the upper and lower detection limits of the designed electrode were 1.2 × 10^–2 and 8 × 10^–7 M. The electrode showed a Nernstian response over a silver ion concentration range of 1 × 10^–6 to 1 × 10^–2 M with a slope of 59.1 ± 0.5 mV/decade. The response time of the electrode was less than 18 s and its effective lifetime was 3 months. The isothermal temperature coefficient of the electrode dE°/dT was determined as 0.00011 V/grad. Thermodynamic functions such as ΔS°, ΔH° and ΔG° were obtained by calculating the thermal coefficient of the electrode.     

Determination of zearalenone with a glassy carbon electrode modified with nanocomposite consisting of palladium nanoparticles and a conductive polymeric ionic liquid

A glassy carbon electrode (GCE) modified with polymeric nanocomposite consisting of palladium nanoparticles and a conductive polymeric ionic liquid was prepared. The modified GCE was applied to sensitive and fairly selective electrochemical determination of the mycotoxin zearalenone. Electrocatalytic oxidation is performed in a solution containing 20 % (V/V) acetonitrile and 80 % (V/V) of 1 M perchloric acid. Cyclic voltammetry and square wave voltammetry revealed a well-defined electrocatalytic peak current at overpotential of +0.69 V versus Ag/AgCl. Under optimized experimental conditions, there is a linear relationship between anodic peak current and zearalenone concentration in the range from 0.03 to 35 ng?mL￣¹, and the detection limit is 0.01 ng?mL￣¹. The method was successfully applied to the analysis of zearalenone in spiked food samples and gave recoveries between 95.6 and 104.0 %.

Open image in new window

Graphical abstract The nanocomposite (PdVC-PIL) was prepared by polymerization of ionic liquid monomer (PIL) in presence of Pd nanoparticles on Vulcan XC-72R carbon (PdVC). The solution containing nanocomposite was placed on the glassy carbon electrode (GCE). The voltammetry activity of modified electrode (PdVC-PIL/GCE) was compared to a bare GCE for zearalenone determination.

     

Nickel(II) complex with 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane

A nickel(II) complex, [Ni(taetacn)](ClO₄)₂ ? H₂O, where taetacn = 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane was synthesized. The crystal structure was determined by the single-crystal X-ray diffraction method at 293 K. The complex crystallizes in the orthorhombic space group Pna2₁ with a = 16.004(2) Å, b = 10.186(1) Å, c = 13.937(2) Å, V = 2271.9(5) ų, D_x = 1.56 g cm^?3, D_m = 1.59 g cm^?3 (floatation method), and Z = 4. The R₁ [I > 2σ(I)] and wR₂ (all data) values are 0.0636 and 0.1672, respectively, for all 4845 independent reflections. The compound is composed of octahedral nickel(II) cation with three 2-aminoethyl pendant groups of taetacn, tetrahedral ClO ₄ ^? anion, and a water molecule of crystallization. Electronic spectra are consistent with the octahedral geometry. Temperature dependence of the magnetic susceptibility (4.5–300 K) can be interpreted considering the zero-field splitting of the nickel(II) ion (g = 2.14, D = 3.72 cm^?1, and Nα = 300 × 10^?6 cm³ mol^?1). Cyclic voltammetry in DMF showed quasi-reversible and irreversible oxidation waves (E_pa = 0.54 V, E_pc = 0.45 V; E_pa = 1.16 V, E_pc = 0.71 V vs. Ag/Ag⁺).     

Chlorokomplexe von Ti(III), V(III) und Cr(III) in Propandiol-1,2-carbonat und Trimethylphosphat

Addition of chloride ions to the hexasolvated ions of Ti(III), V(III) and Cr(III) in propandiol-1,2-carbonate (PDC) and trimethylphosphate (TMP) may lead to the following complexes: [TiCl]²⁺ (inPDC), [TiCl₂]⁺ (inTMP), TiCl₃ (inPDC andTMP, low solubility inTMP), [TiCl₄]^? (inPDC andTMP?), [TiCl₆]^3? (inPDC); [VCl]²⁺ (inPDC andTMP), VCl₃ (inPDC andTMP, low solubility inTMP), [VCl₄]^? (inPDC); [CrCl]²⁺ (inTMP), [CrCl₂]⁺ (inPDC), CrCl₃ (inPDC andTMP), [CrCl₄]^? (inPDC).     

Ultrasensitive determination of hydrazine using a glassy carbon electrode modified with Pyrocatechol Violet electrodeposited on single walled carbon nanotubes

A glassy carbon electrode (GCE) was modified with pyrocatechol violet (PCV) that was electrodeposited on single walled carbon nanotubes (SWCNTs) via continuous cycling between 0 and 0.9 V (vs. SCE). The resulting electrode exhibits excellent electrocatalytic activity towards the oxidation of hydrazine at 0.3 V. The apparent surface coverage of the electrode is at least 24 times higher (2.7?×?10^?10 mol cm^?2) than that obtained with a bare GCE (1.1?×?10^?11 mol cm^?2). This is attributed to a remarkably strong synergistic effect between the acid-pretreated SWCNTs and the electrodeposited PCV coating. Response is fast (2 s) and sensitive (281 mA M^?1 cm^?2). Other features include a wide linear range (150 nM to 0.4 mM) and a low detection limit (150 nM at an SNR of 3). The sensor has been successfully applied to the determination of hydrazine in water and cigarette samples with good accuracy and precision. In addition, the morphology and the wetting properties of the coating were studied by scanning electromicroscopy and contact angle measurements.

Voltammetric Characterization of Grafted Polymer Modified with ZnO Nanoparticles on Glassy Carbon Electrode

In this study, a grafted polymer (GP) with ZnO nanoparticles (GP/ZnO NPs) was attached on the surface of glassy carbon electrode (GCE), in order to produce a new modified electrode (GP/ZnO NPs-GCE). The gamma irradiation method was used to grafted polystyrene (polymer) with acrylonitrile (monomer), while slow evaporation process was used to prepare the new modified electrode. The cyclic voltammetry (CV) of K₄[Fe(CN)₆] was used to study the electrochemical properties GP/ZnO NPs-GCE. The peak separation (ΔE_pa-c) was 500 mV between the redox peaks of Fe(II)/Fe(III) in an aqueous solution of 1 M KCl and the current ratio of redox current peaks (I_pa/I_pc) was ≈ 1 for the modified electrode. This indicated that the modified electrode has s good reversibility and conductivity, wherefore; it was applied in the voltammetric filed. It was found that the modified electrode GP/ZnO NPs-GCE have a reasonable solubility and stability at various pH medium. Additionally, the sensitivity of the electrochemical analysis by cyclic voltammetric (CV) method is extensively subjected to the pH medium and the scan rate (SR). A couple of redox current peaks of K₄[Fe(CN)₆] in KCl solution was observed with a reversible process: Fe³⁺/Fe²⁺. Finally a good diffusion coefficient of electroactive species (D) for the new modified electrode was found in this study by chronoamperometry method using Cottrell equation.     

Azidokomplexe in nichtwäßrigen Lösungsmitteln, 3. Mitt.: Ti(III), V(III) und Cr(III) in Acetonitril,Propandiol-1,2-carbonat und Trimethylphosphat

Ions of Ti(III), V(III) and Cr(III) seem to be converted to the following azido complexes in acetonitrile, propanediol-1,2-carbonate and trimethylphosphate: [Ti(N₃)₂]⁺ (inTMP), Ti(N₃)₃ (probably distorted octahedral inAN, PDC andTMP, low solubility inTMP), [Ti(N₃)₄]^? (probably tetragonal inAN, probably octahedral inTMP), [Ti(N₃)₆ ^3? (probably distorted octahedral inAN andPDC); [V(N₃)]²⁺ (inAN, PDC andTMP), V(N₃)₃ (octahedral inAN, PDC andTMP, low solubility inTMP), [V(N₃)₄]^? (inPDC), [V(N₃)₆]^3? (octahedral inAN andPDC); [Cr(N₃)]²⁺ (inTMP), [Cr(N₃)₂]⁺ (octahedral inAN andPDC), Cr(N₃)₃ (octahedral inAN, PDC andTMP), [Cr(N₃)₆]^3? (octahedral inAN andPDC).