Biomic study of human myeloid leukemia cells differentiation to macrophages using DNA array,proteomic, and bioinformatic analytical methods

A biomic approach by integrating three independent methods, DNA microarray, proteomics and bioinformatics, is used to study the differentiation of human myeloid leukemia cell line HL-60 into macrophages when induced by 12-O-tetradecanoyl-phorbol-13-acetate (TPA). Analysis of gene expression changes at the RNA level using cDNA against an array of 6033 human genes showed that 5950 (98.6%) of the genes were expressed in the HL-60 cells. A total of 624 genes (10.5%) were found to be regulated during HL-60 cell differentiation. Most of these genes have not been previously associated with HL-60 cells and include genes encoded for secreted proteins as well as genes involved in cell adhesion, signaling transduction, and metabolism. Protein analysis using two-dimensional gel electrophoresis showed a total of 682 distinct protein spots; 136 spots (19.9%) exhibited quantitative changes between HL-60 control and macrophages. These differentially expressed proteins were identified by mass spectrometry. We developed a bioinformatics program, the Bulk Gene Search System (BGSS, http://www.sinica.edu.tw:8900/perl/genequery.pl) to search for the functions of genes and proteins identified by cDNA microarrays and proteomics. The identified regulated proteins and genes were classified into seven groups according to subcellular locations and functions. This powerful holistic biomic approach using cDNA microarray, proteomics coupled to bioinformatics can provide in-depth information on the impact and importance of the regulated genes and proteins for HL-60 differentiation.     

微量热法研究药物对肿瘤细胞的诱导分化作用

Sp-Octyl-(8-Chloroadenosine)-3',5'-Cyclophosphate (OCC), a newlysynthesized cAMP analog, strongly induces growth inhibition and differentiation in human promyelocytic leukemia HL-60 cells. The effect of OCC is dose-time dependent. By using the LKB2277 Bioactivity Monitor, we determined the heat production rate of HL-60 cells treated by OCC at different concentrations. It was found that the heat production rate of HL-60 cell treated by OCC gradually decreased to that of normal human neutrophiles.     

Electrochemiluminescence analysis of folate receptors on cell membrane with on-chip bipolar electrode

In this paper we report a transparent bipolar electrode based microfluidic chip-electrochemiluminescence (ECL) system for sensitive detection of folate receptors (FR) on cell membranes. This integrated system consists of a poly(dimethylsiloxane) (PDMS) layer containing a microchannel and a glass bottom sheet with indium tin oxide (ITO) strips as bipolar detectors. The ITO strips are fabricated using a PDMS micromold with carbon ink as a protective layer in place of traditional photoresist. The configuration of the bipolar electrode has great influence on the ECL intensity of Ru(bpy)(3)(2+)/tripropylamine(TPA) system. Further studies show that folic acid (FA) can strongly inhibit the ECL of the Ru(bpy)(3)(2+)/TPA system. Based on specific recognition between FA and FR on cell membrane, this microfluidic chip-ECL system is successfully applied for detecting the level of FR on human cervical tumor (HL-60) cells and MEF cells. It is found that the ECL intensity increases with the number of HL-60 cells in the range of 21 to 3.28 × 10(4) cells/mL. The average level of FR on HL-60 cells is calculated to be 8.05 ± 0.75 × 10(-18) mol/cell. While for MEF cells, it shows a much slower ECL increment than HL-60 cells due to the much lower FR level on MEF cells (5.30 ± 0.61 × 10(-19) mol/cell). Moreover, exocytosis of FA after FR mediated endocytosis was observed according to the change of the ECL signal with the incubation time of HL-60 cells in the FA- Ru(bpy)(3)(2+)/TPA system.     

Data mining the NCI cancer cell line compound GI(50) values: identifying quinone subtypes effective against melanoma and leukemia cell classes

Using data mining techniques, we have studied a subset (1400) of compounds from the large public National Cancer Institute (NCI) compounds data repository. We first carried out a functional class identity assignment for the 60 NCI cancer testing cell lines via hierarchical clustering of gene expression data. Comprised of nine clinical tissue types, the 60 cell lines were placed into six classes-melanoma, leukemia, renal, lung, and colorectal, and the sixth class was comprised of mixed tissue cell lines not found in any of the other five classes. We then carried out supervised machine learning, using the GI(50) values tested on a panel of 60 NCI cancer cell lines. For separate 3-class and 2-class problem clustering, we successfully carried out clear cell line class separation at high stringency, p < 0.01 (Bonferroni corrected t-statistic), using feature reduction clustering algorithms embedded in RadViz, an integrated high dimensional analytic and visualization tool. We started with the 1400 compound GI(50) values as input and selected only those compounds, or features, significant in carrying out the classification. With this approach, we identified two small sets of compounds that were most effective in carrying out complete class separation of the melanoma, non-melanoma classes and leukemia, non-leukemia classes. To validate these results, we showed that these two compound sets' GI(50) values were highly accurate classifiers using five standard analytical algorithms. One compound set was most effective against the melanoma class cell lines (14 compounds), and the other set was most effective against the leukemia class cell lines (30 compounds). The two compound classes were both significantly enriched in two different types of substituted p-quinones. The melanoma cell line class of 14 compounds was comprised of 11 compounds that were internal substituted p-quinones, and the leukemia cell line class of 30 compounds was comprised of 6 compounds that were external substituted p-quinones. Attempts to subclassify melanoma or leukemia cell lines based upon their clinical cancer subtype met with limited success. For example, using GI(50) values for the 30 compounds we identified as effective against all leukemia cell lines, we could subclassify acute lymphoblastic leukemia (ALL) origin cell lines from non-ALL leukemia origin cell lines without significant overlap from non-leukemia cell lines. Based upon clustering using GI(50) values for the 60 cancer cell lines laid out by the RadViz algorithm, these two compound subsets did not overlap with clusters containing any of the NCI's 92 compounds of known mechanism of action, a few of which are quinones. Given their structural patterns, the two p-quinone subtypes we identified would clearly be expected to possess different redox potentials/substrate specificities for enzymatic reduction in vivo. These two p-quinone subtypes represent valuable information that may be used in the elucidation of pharmacophores for the design of compounds to treat these two cancer tissue types in the clinic.     

Design and fabrication of poly (glycerol sebacate)‐based fibers for neural tissue engineering: Synthesis,electrospinning, and characterization

Poly (glycerol sebacate) (PGS) is a thermoset biodegradable elastomer considered as a promising candidate material for nerve applications. However, PGS synthesis is very time and energy consuming. In this study, the PGS pre‐polymer (pPGS) was synthesized using three synthesis times of 3, 5, and 7 hours at 170°C. Fourier transform infrared (FTIR), nuclear magnetic resonance spectroscopy, X‐ray diffraction analysis, and differential scanning calorimetry thermogram were utilized to study the pPGS behavior. Poly (vinyl alcohol) was used as a carrier to fabricate aligned poly (vinyl alcohol)‐poly (glycerol sebacate) (PVA‐PGS) fibers with various ratios (60:40, 50:50, and 40:60) using electrospinning and crosslinked through the thermal crosslinking method. Morphology of the fibers was studied before and after crosslinking using scanning electron microscopy (SEM). FTIR, mechanical properties in the dry and wet state, water contact angle, in vitro degradation, and water uptake behavior of crosslinked scaffolds were also investigated. 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay, SEM analysis, and 4′, 6‐diamidino‐2‐phenylindole (DAPI) staining were utilized to determine the biocompatibility of scaffolds. The results show the synthesized pPGS in 3 hours at 170°C is the optimized sample in the terms of chemical reaction. All scaffolds have bead‐free and a uniform fiber diameter. The Young's modulus of crosslinked PVA‐PGS (50:50 and 40:60) fibers is shown to be in the expected range for nerve applications. The cell culture studies reveal PVA‐PGS (50:50 and 40:60) fibers could lead to better cell adhesion and proliferation. The results suggest that PVA‐PGS (50:50 and 40:60) is a suitable and promising biodegradable material in the fabrication of scaffolds for nerve regeneration.     

全钒液流单电池充放电行为及特性研究

建立具有外置双饱和甘汞参比电极及双液流电池的实验装置系统.使用该装置可在同一时刻同时测定小型液流单电池充放电时的电池电压、电池正负极电位及正负极开路电位,进而计算充放电过程电池的欧姆内阻降(iR)及其正负极过电位.以石墨毡为电极、Nafion 117作隔膜的全钒液流单电池,在60 mA.cm-2电流密度下,每一充放电循环的平均iR降约占总电压损耗的74%,表明该电池的电压效率受制于电池的欧姆内阻.充放电曲线显示,电池放电终点之所以出现主要是由于电池负极电位在放电末期的快速上升而引起的.本文设计的全钒单电池于60 mA.cm-2下工作时,其电压及能量效率分别达89%和85%,表明该电池结构合理,且石墨毡是钒电池合适的电极材料.     

Hypericum perforatum L. extract - novel photosensitizer against human bladder cancer cells

The polar methanolic fraction (PMF) of the Hypericum perforatum L. extract has recently been developed and tested as a novel, natural photosensitizer for use in the photodynamic therapy (PDT), and photodynamic diagnosis (PDD). PMF has been tested on HL-60 leukemic cells and cord blood hemopoietic progenitors. In the present study, the efficacy of PMF as a phototoxic agent against urinary bladder carcinoma has been studied using the T24 (high grade metastatic cancer), and RT4 (primary low grade papillary transitional cell carcinoma) human bladder cancer cells. Following cell culture incubation, PMF was excited using 630 nm laser light. The photosensitizer exhibited significant photocytotoxicity in both cell lines at a concentration of 60microg/ml, with 4-8 J/cm(2) light dose, resulting in cell destruction from 80% to 86%. At the concentration of 20microg/ml PMF was not active in either cell line. These results were compared with the results obtained in the same cell lines, under the same conditions with a clinically approved photosensitizer, Photofrin. Photofrin was used in the maximum clinically tolerable dose of 4microg/ml, and it was also excited with 630 nm laser light. In the T24 cell Photofrin exhibited slightly less photocytotocixity, compared with PMF, resulting in 77% cell death with 8J/cm(2) light dose. However, against the RT4 cells Photofrin resulted in minimal cell death (9%) with even 8J/cm(2) light dose. Finally, the type of cell death induced by PMF photoactivation was studied using flow cytometry and DNA laddering. Cell death by PMF photodynamic action in these two bladder cell lines is caused predominently by apoptosis. The reported significant photocytotoxicity, selective localization, natural abundance, easy, and inexpensive preparation, underscore that the PMF extract hold the promise of being a novel, effective PDT photosensitizer.     

Photo-induced Charge-transfer and Photovoltaic Effect in a Composite Involving a Nonconjugated Conductive Polymer and C60

Photo-induced charge-transfer and resulting photovoltaic effect in a composite involving a nonconjugated conductive polymer, poly(β -pinene) and C₆₀ is reported. The photovoltaic cell was fabricated using indium-tin-oxide coated glass as one electrode and aluminum as the other, with poly(β -pinene)-C₆₀ composite film sandwiched in-between. A Nitrogen laser (325 nm) and an illuminant white-light-source (300–700 nm) were used and the photo-voltage produced was found to have a linear dependency on light intensity. The photoluminescence of poly(β -pinene) (at 360 nm) was quenched when C₆₀ was added to form the composite. Therefore, the photovoltaic effect is a result of excited-state electron-transfer from poly(β -pinene) to C₆₀.     

Intracellular uptake and photodynamic activity of water-soluble [60]- and [70]fullerenes incorporated in liposomes

Water-soluble fullerenes have attracted attention as promising compounds that have been used to forge new paths in the field of photo-biochemistry. To prepare water-soluble fullerenes, we employed lipid-membrane-incorporated fullerenes (LMICx; x=60 or 70) by using the fullerene exchange method from a gamma-cyclodextrin (gamma-CD) cavity to vesicles. LMIC60 have low toxicity in the dark and engender cell death by photoirradiation (lambda>350 nm). Furthermore, the photodynamic activity of LMIC70 is 4.7-fold that of LMIC60 for the same photon flux (lambda>400 nm). One of the reasons for the higher phototoxicity of LMIC70 is the higher generation of singlet oxygen (1O2) in LMIC70 than in LMIC60. The difference between LMIC60 and LMIC70 is considered to be simply derived from the amount of light absorption in the 400-700 nm region that is suitable for photodynamic therapy (PDT). To the best of our knowledge, this is the first case in which biological activity of C70 and its derivatives toward HeLa cells has been assayed.     

Porphyrin-fullerene C60 dyads with high ability to form photoinduced charge-separated state as novel sensitizers for photodynamic therapy

The photodynamic activities of a porphyrin-C60 dyad (P-C60) and its metal complex with Zn(II) (ZnP-C60) were compared with 5-(4-acetamidophenyl)-10,15,20-tris(4-methoxyphenyl)porphyrin (P), both in homogeneous medium-bearing photooxidizable substrates and in vitro on the Hep-2-human-larynx-carcinoma cell line. This study represents the first evaluation of dyads, with a high capacity to form a photoinduced charge-separated state, to act as agents to inactivate cells by photodynamic therapy (PDT). Absorption and fluorescence spectroscopic studies were performed in toluene and N,N-dimethylformamide (DMF). The emission of the porphyrin moiety in the dyads is strongly quenched by the attached fullerene C60 moiety. The singlet molecular oxygen, O2(1delta(g)), productions (phi(delta)) were determined using 9,10-dimethylanthracene (DMA). The values of phi(delta) were strongly dependent on the solvent's polarity. Comparable phi(delta) values were found for dyads and P in toluene, while O2(1delta(g)) production was significantly diminished for the dyads in DMF. In more polar solvent, the stabilization of charge-transfer state takes place, decreasing the efficiency of porphyrin triplet-state formation. Also, both dyads photosensitize the decomposition of L-tryptophan in DMF. In biological medium, no dark cytotoxicity was observed using sensitizer concentrations < or = 1 microM and 24 h of incubation. The uptake of sensitizers into Hep-2 was studied using 1 microM of sensitizer and different times of incubation. Under these conditions, a value of approximately 1.5 nmol/10(6) cells was found between 4 and 24 h of incubation. The cell survival after irradiation of the cells with visible light was dependent upon light-exposure level. A higher photocytotoxic effect was observed for P-C60, which inactivates 80% of cells after 15 min of irradiation. Moreover, both dyads keep a high photoactivity even under argon atmosphere. Thus, depending on the microenvironment where the sensitizer is localized, these compounds could produce biological photodamage through either an O2(1delta(g))-mediated photoreaction process or a free-radicals mechanism under low oxygen concentration. These results show that molecular dyads, which can form a photoinduced charge-separated state, are a promising model for phototherapeutic agents, with potential applications in cell inactivation by PDT.     

High performance nitrile copolymers for polymer electrolyte membrane fuel cells

This paper reports the fuel cells (DMFC and PEMFC) performance using sulfonated poly(arylene ether ether nitrile) (SPAEEN) copolymers containing sulfonic acid group arranged in structurally different ways. The membrane electrode assembly (MEA) fabricated from SPAEEN containing 60 mol% of angled naphthalenesulfonic acid group (m-SPAEEN-60) had superior performance over those derived from pendent naphthalenesulfonic acid group (p-SPAEEN) or sulfonated hydroquinone (HQ-SPAEEN) in H₂/air and/or DMFC conditions. For example, the current density of the MEA using m-SPAEEN-60 at 0.5 V and 2.0 M methanol was 250 mA/cm², whereas the current densities of the MEAs using p-SPAEEN-50 and HQ-SPAEEN-56 were 185 and 190 mA/cm², respectively. In addition, compared with the sulfonated polysulfone (BPSH-35) and Nafion membranes, the copolymer containing nitrile group showed the improved cell performance. For example, the power density of the MEA using m-SPAEEN-60 at 250 mA/cm² and 2.0 M methanol was 125 mW/cm², whereas the power densities of the MEAs using sulfonated polysulfone (BPSH-35) and Nafion were 115 and 113 mW/cm², respectively. m-SPAEEN-60 showed stable cell performance during extended operation (>100 h).     

Formation of rectangular packing and one-dimensional lines of C60 on 11-phenoxyundecanethiol self-assembled monolayers on Au(111)

The behavior of C(60) molecules deposited onto 11-phenoxyundecanethiol (phenoxy) self-assembled monolayers (SAMs) is studied using ultrahigh vacuum scanning tunneling microscopy (UHV-STM) and spectroscopy. We observe that after thermally annealing between 350 and 400 K in vacuum a combination of hexagonally close-packed islands, rectangularly packed islands, and isolated single lines of C(60) is observed when the C(60) is initially deposited on an unannealed phenoxy SAM. However, only rectangularly packed islands are found when they are deposited on a preannealed phenoxy SAM. We determine the rectangular packing to have a (2√3 × 4) rectangular unit cell with respect to the underlying Au(111) substrate. This type of C(60) structure has not been observed previously for multicomponent self-assemblies on a surface. We discuss the possible causes for the formation of this structure as well as the differences between starting on an unannealed SAM and an annealed one. This study demonstrates the capability of functionalized alkanethiol SAMs to control the growth and structure of C(60) islands during annealing depending on the structural changes of the SAM itself; by preannealing the SAM, the motion of the C(60) can be confined and unique structures resulting from interactions between the SAM molecules and C(60) can be produced.     

Inhibitory effect of heat shock protein 70 on apoptosis induced by photodynamic therapy in vitro

We examined the apoptotic effects of photodynamic therapy (PDT) in leukemia cells (HL60) and lymphoma cells (Raji). Moreover, we also investigated the relationship of apoptosis induced by PDT to heat shock protein (HSP) expression. To induce 80% of cell death by PDT, HL60 cells required 6 microg/mL and Raji cells required 9 microg/mL of Photofrin. PDT induced apoptosis in 77.2% of HL60 and in 0.4% of Raji at lethal dose (LD80) conditions. The cell line in which apoptosis is predisposed may be more susceptible to PDT compared with the cell line in which necrosis is predisposed. Furthermore, HSP-70 was expressed constitutively in Raji cells but not in HL60 cells. Heat treatment of HL60 cells induced expression of HSP-70 and resulted in significant reduction of PDT-mediated apoptosis. From the results of this experiment, it is suggestive that HSP-70 contributes to inhibition of apoptosis mediated by PDT.     

Molecular orientation and lattice ordering of C60 molecules on the polar FeO/Pt(111) surface

C(60) molecules assemble into close packing layer under the domination of the intermolecular interaction when deposited onto Pt(111)-supported FeO layer kept at 400 K. From corresponding high resolution scanning tunneling microscopy (STM) image, a kind of C(60) molecular orientational ordering stabilized by the intermolecular interaction is revealed as C(60)/FeO(111)-(√133 × √133) R17.5° structure and determined from the commensurability between the C(60) nearest-neighbor distance and the lattice of the underlying oxygen layer. Moreover, due to the inhomogeneously distributed work function of the underlying FeO layer, the C(60) molecular electronic state is periodically modulated resulting in a bright-dim STM contrast. In addition, one coincidence lattice ordering is determined as 8 × 8 superstructure with respect to the C(60) primitive cell, which overlays a 3 × 3 moiré cell of the underlying FeO layer.     

Quantum dot-sensitized solar cells employing Pt/C60 counter electrode provide an efficiency exceeding 2%

A microporous platinum/fullerenes (Pt/C 60) counter electrode was prepared by using a facile rapid thermal decomposition method,and the quantum-dot sensitized solar cell (QDSSC) of Pt/C 60-TiO 2-CdS-ZnS and Pt/C 60-TiO 2-CdTe-ZnS was fabrication.The technique forms a good contact between QDs and TiO 2 films.The photovoltaic performances of the as-prepared cells were investigated.The QDSSCs with Pt/C 60 counter electrode show high power conversion efficiency of 1.90% and 2.06%,respectively (under irradiation of a simulated solar light with an intensity of 100 mW cm 2),which is comparable to the one fabricated using conventional Pt electrode.     

A simple and regioselective α-bromination of alkyl aromatic compounds by two-phase electrolysis

Electrochemical bromination of toluene and substituted toluenes by two-phase electrolysis yields the corresponding α-brominated products. The reaction has been carried out in a single compartment cell with platinum electrodes at 0 °C in chloroform using an aqueous sodium bromide solution (60%) containing a catalytic amount of HBr. Two-phase electrolysis results in high yields (60-95%) of monobromo compounds with very high regioselectivity (>95%).     

High-yield cell ordering and deterministic cell-in-droplet encapsulation using Dean flow in a curved microchannel

In this article high-yield (77%) and high-speed (2700 cells s(-1)) single cell droplet encapsulation is described using a Dean-coupled inertial ordering of cells in a simple curved continuous microchannel. By introducing the Dean force, the particles will order to one equilibrium position after travelling less than 1 cm. We use a planar curved microchannel structure in PDMS to spatially order two types of myeloid leukemic cells (HL60 and K562 cells), enabling deterministic single cell encapsulation in picolitre drops. An efficiency of up to 77% was reached, overcoming the limitations imposed by Poisson statistics for random cell loading, which yields only 37% of drops containing a single cell. Furthermore, we confirm that > 90% of the cells remain viable. The simple planar structure and high throughput provided by this passive microfluidic approach makes it attractive for implementation in lab on a chip (LOC) devices for single cell applications using droplet-based platforms.     

Cytotoxic and apoptotic activities of novel Pd(II) complexes against human leukemia cell lines in vitro

In the investigation for alternative chemotherapeutic strategies against leukemia, Pd(II) complexes were synthesized and investigated for cytotoxic and apoptotic properties on two human leukemia cell lines (HL-60 and K562). Pd(II) complexes (Pd-5a and Pd-6a) with 5a and 6a as ligands were synthesized and characterized by ¹H-NMR and F-TIR. The cytotoxicity of the compounds was quantified using MTT method. Bax, Bcl-2, and caspase 3 gene expression levels were estimated using RT-qPCR. Here we show that Pd(II) complexes have important cytotoxic activity on human leukemia cell lines. RT-qPCR indicated that Bax and caspase 3 gene expression levels were increased after 24 h treatment with Pd-5a and Pd-6a complexes in both HL-60 and K562 cells at some selected dose. Furthermore, Bcl-2 gene expression level decreased after 24 h treatment with Pd-5a and Pd-6a complexes in K562 cells at all selected dose. In HL-60 cells, only one selected Pd-5a dose (25 µM) decreased the gene expression level of Bcl-2. The results obtained in the present investigation indicate that these two newly synthesized Pd(II) complexes have apoptotic effects at appropriate doses through caspase 3 and Bax genes and might represent a novel potentially active agents for the management of human leukemia cell lines.     

Synthesis and Antitumor Activity of 1-Substituted 1,2,3-Triazole-Mollugin Derivatives

A new series of mollugin-1,2,3-triazole derivatives were synthesized using a copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction of corresponding O-propargylated mollugin with aryl azides. All the compounds were evaluated for their cytotoxicity on five human cancer cell lines (HL-60, A549, SMMC-7721, SW480, and MCF-7) using MTS assays. Among the synthesized series, most of them showed cytotoxicity and most of all, compounds 14 and 17 exhibited significant cytotoxicity of all five cancer cell lines.