A Label-Free Amperometric Immunoassay for Thrombomodulin Using Graphene/Silver-Silver Oxide Nanoparticles as a Immobilization Matrix

A simple, sensitive, and label-free electrochemical immunosensor has been developed for the measurement of serum thrombomodulin (TM), an endothelial glycoprotein which is associated with the progression and metastasis of tumors. At first, the graphene nanosheets, which were dispersed in Nafion solution, were used to coat the bare gold electrode. Then, silver-silver oxide nanoparticles (Ag-Ag₂O NPs) were immobilized on the graphene-modified electrode by a one-step electrochemical deposition method. Lastly, a thrombomodulin antibody (anti-TM) was attached via amido-Ag affinity. This strategy combines graphene/Ag-Ag₂O NPs hybrid materials as an immobilization matrix and Ag-Ag₂O NPs also as an electrochemical signal indication reagent. The main advantage of this strategy has two important aspects. One is the high stability and unique electronic properties of the graphene nanostructure. The other is the use of Ag-Ag₂O NPs as the immobilization matrix and redox probes, thus avoiding the laborious labeling protein operation. Using this strategy, the concentration of TM in the range of 0.1 to 20 ng/mL was detected, with a detection limit of 31.5 pg/mL (at 3σ). The proposed methodology demonstrates that the nanocomposite film composed of graphene and Ag-Ag₂O NPs is a potential for biosensor applications.     

Determination of Reactive Intermediates During Anodic Oxygen-transfer Reactions at Lead Dioxide

IntroductionSincethepastdecade ,electrochemicalmethodsforelectrosynthesis ,wastewatertreatmentandorgan iccompounddeterminationhavebeenwidelydevel oped[1— 6 ] .Thebasicprincipleisthatorganicsub stancesareelectrochemicallyoxidizedintothedesiredproducts.However ,inmanycasesthedirectoxida tionoforganicspeciesinanaqueoussolutionatasim plemetaloracarbonelectrodeisnotpossiblebecausethehighpotentialsrequiredfortheoxidationoforgan iccompoundsusuallyresultinoxygenevolution .Therefore ,theproperchoiceof…     

苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应：同时检测肼和苯酚

开发了一种磁性Fe3O4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe3O4纳米粒子上,然后将此复合物吸附于设计的MBCPE上. MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe3O4NPs/DPB电极上肼的电化学行为.作为电化学传感器, MBCPE/Fe3O4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe3O4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

Dual amplification strategy of highly sensitive thrombin amperometric aptasensor based on chitosan-Au nanocomposites

A highly sensitive and selective electrochemical aptasensor for thrombin was developed. By introducing chitosan-gold nanoparticles and horseradish peroxidase (CS-AuNPs-HRP) conjugates to the sensitive union, the thrombin detection signal was dual amplified. The capture probe was prepared by immobilizing an anti-thrombin aptamer on core-shell Fe(3)O(4)-Au magnetic nanoparticles (AuMNPs) and which was served as magnetic separation material as well. The detection probe was prepared from another anti-thrombin aptamer, horseradish peroxidase (HRP), thiolated CS nanoparticle and gold nanoparticle (CS-AuNPs-HRP-Apt2). In the presence of thrombin, the sandwich structure of AuMNPs-Apt1/thrombin/Apt2-CS-AuNPs-HRP was formed and abundant HRP was captured in it. The resultant conjugates are of magnetic characters and were captured onto the surface of a screen printed carbon electrode (SPCE) to prepare the modified electrode by a magnet located on the outer flank of the SPCE. It was demonstrated that the oxidation of hydroquinone (HQ) with H(2)O(2) was dramatically accelerated by the captured HRP. The electrochemical signal, which correlated to the reduction of BQ (the oxidation product of HQ), was amplified by the catalysis of HRP toward the reaction and the enrichment of HRP on the electrode surface. Under optimized conditions, ultrasensitive and high specific detection for thrombin was realized with the proposed assay strategy. The signal current was linearly correlated to the thrombin concentration in the range of 0.01-10 pM with a detection limit of 5.5 fM (S/N = 3). These results promise extensive applications of this newly proposed signal amplification strategy in protein detection and disease diagnosis.     

Electrochemical sensing of silver tags labelled DNA immobilized onto disposable graphite electrodes

An electrochemical approach for the improved electrochemical sensing of DNA was developed in this study based on the oxidation signals of silver and DNA base, guanine by using disposable pencil graphite electrode (PGE) electrodes. The easy surface modification of disposable electrodes PGEs with nucleic acids was performed by passive adsorption using amino linked DNA oligonucleotide attached onto the surface of silver nanoparticles (Ag-NPs). Firstly, the microscopic characterization of silver nanoparticles was investigated by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), and the electrochemical behaviour of these NPs was studied by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. Then, the overall performance of this novel electrochemical DNA sensing method based on these nanoparticles is studied and discussed in terms of optimum analytical conditions, such as; the effect of DNA concentration, NPs concentration and different buffer solutions, etc. in order to obtain silver and guanine oxidation signals in higher sensitivity and selectivity. The main features related with this electrochemical assay based on silver nanoparticles are discussed and compared with other assays reported in the literatures.     

Experimental and theoretical investigation effect of flavonols antioxidants on DNA damage

A new electrochemical biosensor was developed to demonstrate the effect of Acridine Orange (AO) on DNA damage. Then, the biosensor was used to check the inhibitors effect of three flavonols antioxidants (myricetin, fisetin and kaempferol) on DNA damage. Acridine Orange (AO) was used as a damaging agent because it shows a high affinity to nucleic acid and stretch of the double helical structure of DNA. Decreasing on the oxidation signals of adenine and guanine (in the DNA) in the presence of AO were used as probes to study the antioxidants power, using DNA-modified screen printed graphene electrode (DNA/SPGE). The results of our study showed that the DNA-biosensor could be suitable biosensor to investigate the inhibitors ability of the flavonols antioxidants on the DNA damage. The linear dependency was detected in the two regions in the ranges of 1.0–15.0 and 15.0–500.0 pmol L⁻¹. The detection limit was found 0.5 pmol L⁻¹ and 0.6 pmol L⁻¹ for guanine and adenine, respectively. To confirm the electrochemical results, Uv–Vis and fluorescence spectroscopic methods were used too. Finally molecular dynamic (MD) simulation was performed on the structure of DNA in a water box to study any interaction between the antioxidant, AO and DNA.     

3D nitrogen-doped graphene aerogel-supported Fe3O4 nanoparticles as efficient electrocatalysts for the oxygen reduction reaction

Three-dimensional (3D) N-doped graphene aerogel (N-GA)-supported Fe(3)O(4) nanoparticles (Fe(3)O(4)/N-GAs) as efficient cathode catalysts for the oxygen reduction reaction (ORR) are reported. The graphene hybrids exhibit an interconnected macroporous framework of graphene sheets with uniform dispersion of Fe(3)O(4) nanoparticles (NPs). In studying the effects of the carbon support on the Fe(3)O(4) NPs for the ORR, we found that Fe(3)O(4)/N-GAs show a more positive onset potential, higher cathodic density, lower H(2)O(2) yield, and higher electron transfer number for the ORR in alkaline media than Fe(3)O(4) NPs supported on N-doped carbon black or N-doped graphene sheets, highlighting the importance of the 3D macropores and high specific surface area of the GA support for improving the ORR performance. Furthermore, Fe(3)O(4)/N-GAs show better durability than the commercial Pt/C catalyst.     

三维电极电化学反应器对有机废水的降解研究

本文提出一种基于三维电极电化学反应器处理有机废水的新技术 ,结果表明 :该反应器能有效地去除苯胺 ,但其去除率受外加电压、溶液中Fe2 +的浓度、pH值及处理时间 (t)的影响较大 .该项技术处理有机废水效果明显 ,主要是基于电致过氧化氢 ,在Fe2 +存在情况下迅速生成对有机物有很强氧化作用的羟基自由基 .通过ESR法测出了在该电化学反应器处理废水过程中产生的羟基自由基     

2,4-二氯苯酚的电化学氧化降解反应研究

采用循环伏安法和原位红外光谱技术研究了2,4-二氯苯酚在Pt电极上的电化学氧化降解反应,结合Fukui函数值预测了2,4-二氯苯酚在电化学氧化过程中的反应位点. 结果表明,Pt电极对2,4-二氯苯酚有良好的电催化活性,2,4-二氯苯酚在电极表面反应主要有3个途径：直接通过电化学反应脱去氯离子,生成苯酚;在·OH的进攻下,C—Cl键断裂,4位Cl较2位Cl先脱去,生成苯二酚,并可进一步氧化生成苯醌以及不饱和羧酸;在·OH的进攻下发生苯环开环反应,生成含氯不饱和羧酸. 在1700 mV左右,2,4-二氯苯酚可经电化学氧化生成CO₂.     

Scanning electrochemical microscopy studies of glutathione-modified surfaces. An erasable and sensitive-to-reactive oxygen species surface

A surface sensitive to reactive oxygen species (ROS) was prepared by reduction of a diazonium salt on glassy carbon electrode followed by the chemical coupling of glutathione (GSH) playing the role of an antioxidant species. The presence of active GSH was characterized through spectroscopic studies and electrochemical analysis after labeling of the -SH group with ferrocene moieties. The specific reactivity of GSH vs ROS was evaluated with scanning electrochemical microscopy (SECM) using the reduction of O(2) to superoxide, O(2)(?-), near the GSH-modified surface. Approach curves show a considerable decrease of the blocking properties of the layer due to reaction of the immobilized GSH with O(2)(?-) and the passage of GSH to the glutathione disulfide (GSSG). The initial surface could be regenerated several times with no significant variations of its antioxidant capacity by simply using the biological system glutathione reductase (GR)/NADPH that reduces GSSG back to GSH. SECM imaging shows also the possibility of writing local and erasable micropatterns on the GSH surface by production of O(2)(?-) at the tip probe electrode.     

The application of novel spindle-like polypyrrole hollow nanocapsules containing Pt nanoparticles in electrocatalysis oxidation of nicotinamide adenine dinucleotide (NADH)

Novel spindle-like polypyrrole hollow nanocapsules containing Pt nanoparticles (Pt NPs/PPy composite hollow nanospindles) were successfully prepared by using beta-akaganeite (β-Fe(3+)O(OH,Cl)) nanospindles as templates and methanoic acid as a reducing agent. The β-Fe(3+)O(OH,Cl) templates can be easily obtained in ethanol/water mixing solution in the presence of thiophene and FeCl(3)·6H(2)O, and after coating by PPy shell, they can be gradually and completely etched during the reduction of H(2)PtCl(6) into Pt nanoparticles (Pt NPs) with the average size of 3.6 nm on spindle-like polypyrrole hollow nanocapsules, which could still keep their integrality of morphologies with the thickness of PPy shell of 18-20 nm. The investigation of Pt NPs/PPy composite hollow nanospindles modified glassy carbon electrode (GCE) for the application to detect nicotinamide adenine dinucleotide (NADH) with cyclic voltammetry (CV) and amperometry indicated good linearity and sensitivity of responses in the certain range of NADH concentration. The influence of Pt NPs content to the NADH oxidation current was also studied. This new kind of unique spindle-like noble metal/conducting polymer hollow nanostructured complex can be acted as a good steady electrode material for electrocatalytic oxidation of NADH.     

Mechanisms of formation of 8-oxoguanine due to reactions of one and two OH* radicals and the H2O2 molecule with guanine: A quantum computational study

Mechanisms of formation of the mutagenic product 8-oxoguanine (8OG) due to reactions of guanine with two separate OH* radicals and with H2O2 were investigated at the B3LYP/6-31G, B3LYP/6-311++G, and B3LYP/AUG-cc-pVDZ levels of theory. Single point energy calculations were carried out with the MP2/AUG-cc-pVDZ method employing the optimized geometries at the B3LYP/AUG-cc-pVDZ level. Solvent effect was treated using the PCM and IEF-PCM models. Reactions of two separate OH* radicals and H2O2 with the C2 position of 5-methylimidazole (5MI) were investigated taking 5MI as a model to study reactions at the C8 position of guanine. The addition reaction of an OH* radical at the C8 position of guanine is found to be nearly barrierless while the corresponding adduct is quite stable. The reaction of a second OH* radical at the C8 position of guanine leading to the formation of 8OG complexed with a water molecule can take place according to two different mechanisms, involving two steps each. According to one mechanism, at the first step, 8-hydroxyguanine (8OHG) complexed with a water molecule is formed ,while at the second step, 8OHG is tautomerized to 8OG. In the other mechanism, at the first step, an intermediate complexed (IC) with a water molecule is formed, the five-membered ring of which is open, while at the second step, the five-membered ring is closed and a hydrogen bonded complex of 8OG with a water molecule is formed. The reaction of H2O2 with guanine leading to the formation of 8OG complexed with a water molecule can also take place in accordance with two different mechanisms having two steps each. At the first step of one mechanism, H2O2 is dissociated into two OH* groups that react with guanine to form the same IC as that formed in the reaction with two separate OH* radicals, and the subsequent step of this mechanism is also the same as that of the reaction of guanine with two separate OH* radicals. At the first step of the other mechanism of the reaction of guanine with H2O2, the latter molecule is dissociated into a hydrogen atom and an OOH* group which become bonded to the N7 and C8 atoms of guanine, respectively. At the second step of this mechanism, the OOH* group is dissociated into an oxygen atom and an OH* group, the former becomes bonded to the C8 atom of guanine while the latter abstracts the H8 atom bonded to C8, thus producing 8OG complexed with a water molecule. Solvent effects of the aqueous medium on certain reaction barriers and released energies are appreciable. 5MI works as a satisfactory model for a qualitative study of the reactions of two separate OH* radicals or H2O2 occurring at the C8 position of guanine.     

Quantification of the surface diffusion of tripodal binding motifs on graphene using scanning electrochemical microscopy

The surface diffusion of a cobalt bis-terpyridine, Co(tpy)(2)-containing tripodal compound (1·2PF(6)), designed to noncovalently adsorb to graphene through three pyrene moieties, has been studied by scanning electrochemical microscopy (SECM) on single-layer graphene (SLG). An initial boundary approach was designed in which picoliter droplets (radii ~15-50 μm) of the tripodal compound were deposited on an SLG electrode, yielding microspots in which a monolayer of the tripodal molecules is initially confined. The time evolution of the electrochemical activity of these spots was detected at the aqueous phosphate buffer/SLG interface by SECM, in both generation/collection (G/C) and feedback modes. The tripodal compound microspots exhibit differential reactivity with respect to the underlying graphene substrate in two different electrochemical processes. For example, during the oxygen reduction reaction, adsorbed 1·2PF(6) tripodal molecules generate more H(2)O(2) than the bare graphene surface. This product was detected with spatial and temporal resolution using the SECM tip. The tripodal compound also mediates the oxidation of a Fe(II) species, generated at the SECM tip, under conditions in which SLG shows slow interfacial charge transfer. In each case, SECM images, obtained at increasing times, show a gradual decrease in the electrochemical response due to radial diffusion of the adsorbed molecules outward from the microspots onto the unfunctionalized areas of the SLG surface. This response was fit to a simple surface diffusion model, which yielded excellent agreement between the two experiments for the effective diffusion coefficients: D(eff) = 1.6 (±0.9) × 10(-9) cm(2)/s and D(eff) = 1.5 (±0.6) × 10(-9) cm(2)/s for G/C and feedback modes, respectively. Control experiments ruled out alternative explanations for the observed behavior, such as deactivation of the Co(II/III) species or of the SLG, and verified that the molecules do not diffuse when confined to obstructed areas. The noncovalent nature of the surface functionalization, together with the surface reactivity and mobility of these molecules, provides a means to couple the superior electronic properties of graphene to compounds with enhanced electrochemical performance, a key step toward developing dynamic electrode surfaces for sensing, electrocatalysis, and electronic applications.     

Polarographic study of hydrogen peroxide anodic current and its application to antioxidant activity determination

Behavior of hydrogen peroxide in alkaline medium has been studied by direct current (DC) polarography with dropping mercury electrode (DME) aiming to apply it in antioxidant (AO) activity determination. Development of a peroxide anodic current having form of a peak, instead of common polarographic wave, has been investigated. As a base for this investigation the interaction of H₂O₂ with anodically dissolved mercury was followed. Formation of mercury complex [Hg(O₂H)(OH)] has been confirmed. The relevant experimental conditions, such as temperature, concentration and pH dependence, as well as time stability of hydrogen peroxide anodic current, have been assessed. Development of an AO assay based on decrease of anodic current of hydrogen peroxide in the presence of antioxidants (AOs) has been described. Under optimized working conditions, a series of benzoic acids along with corresponding cinnamate analogues have been tested for hydrogen peroxide scavenging activity. In addition, the assay versatility has been confirmed on various complex samples.     

Label-free electrochemical detection of DNA hybridization on gold electrode

A label-free electrochemical detection protocol for DNA hybridization is reported for the first time by using a gold electrode (AuE). The oxidation signal of guanine was monitored at +0.73 V by using square wave voltammetry (SWV) on self-assembled l-cysteine monolayer (SAM) modified AuE. The electrochemical determination of hybridization between an inosine substituted capture probe and native target DNA was also accomplished. 6-mer adenine probe was covalently attached to SAM via its amino link at 5^′ end. Then, 6-mer thymine-tag of the capture probe was hybridized with the adenine probe, thus left the rest of the oligonucleotide available for hybridization with the target. The dependence of the guanine signal upon the concentration of the target was observed. Probe modified AuE was also challenged with non-complementary and mismatch containing oligonucletides. Label-free detection of hybridization on AuE is greatly advantageous over the existing carbon and mercury electrode materials, because of its potential applicability to microfabrication techniques. Performance characteristics of the genosensor are described, along with future prospects.     

Electrochemical biosensor for simultaneous determination of guanine and adenine based on dopamine-melanin colloidal nanospheres–graphene composites

Dopamine-melanin colloidal nanospheres (Dpa-melanin CNDs)–graphene composites-modified glassy carbon electrode (GCE) was prepared by a simple procedure and then successfully used to simultaneously determine guanine and adenine. Scanning electron microscopy (SEM) images and transmission electron microscopy (TEM) were used to characterize the morphology of the Dpa-melanin CNSs–graphene composite. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the electrode modifying process. Differential pulse voltammetry (DPV) was used to study the electrocatalytic activity toward the electrochemical oxidation of guanine and adenine. The modified electrode exhibited enhanced electrocatalytic behavior and good stability for the simultaneous determination of guanine and adenine compared with bare GCE. The electrochemical biosensor exhibited wide linear range of 0.5 to 150 μM with detection limit of 0.05 and 0.03 μM for guanine and adenine detection (S/N?=?3), respectively. Furthermore, the biosensor showed high sensitivity, good selectivity, good reproducibility, and long-term stability to guanine and adenine detection. At the same time, the fabricated electrode was successfully applied for the determination of guanine and adenine in denatured DNA samples with satisfying results. These results demonstrated that Dpa-melanin CNSs–graphene composite was a promising substrate for the development of high-performance electrochemical biosensor.     

光致活性氧淬灭方法检测生物抗氧化剂动力学模型分析

以TiO2纳米颗粒光催化反应为模型,研究了反应过程中的活性氧( ROS)产生以及活性氧淬灭的反应动力学模型。对苯二甲酸分子与体系中的光催化反应产生的OH·反应,生成具有荧光性质的2-羟基对苯二甲酸( lex=315 nm,lem=425 nm),因此对苯二甲酸作为氧化探针分子与体系中的生物抗氧化剂( AOs)分子竞争与ROS的反应,根据体系的荧光、反应时间以及AOs的浓度建立了AOs淬灭ROS的反应动力学模型。根据此模型推导AOs清除ROS的动力学常数,发现常见的生物抗氧化剂的抗氧化活性大小顺序为：硫辛酸、没食子酸、谷胱甘肽、尿酸、维生素C、维生素E、水溶性维生素E和胆红素。     

Synthesis of Fe3O4@phenol formaldehyde resin core-shell nanospheres loaded with Au nanoparticles as magnetic FRET nanoprobes for detection of thiols in living cells

A magnetic, sensitive, and selective fluorescence resonance energy transfer (FRET) probe for detection of thiols in living cells was designed and prepared. The FRET probe consists of an Fe(3)O(4) core, a green-luminescent phenol formaldehyde resin (PFR) shell, and Au nanoparticles (NPs) as FRET quenching agent on the surface of the PFR shell. The Fe(3)O(4) NPs were used as the core and coated with green-luminescent PFR nanoshells by a simple hydrothermal approach. Au NPs were then loaded onto the surface of the PFR shell by electric charge absorption between Fe(3)O(4)@PFR and Au NPs after modifying the Fe(3)O(4)@PFR nanocomposites with polymers to alter the charge of the PFR shell. Thus, a FRET probe can be designed on the basis of the quenching effect of Au NPs on the fluorescence of Fe(3)O(4)@PFR nanocomposites. This magnetic and sensitive FRET probe was used to detect three kinds of primary biological thiols (glutathione, homocysteine, and cysteine) in cells. Such a multifunctional fluorescent probe shows advantages of strong magnetism for sample separation, sensitive response for sample detection, and low toxicity without injury to cellular components.     

The effective peroxidase-like activity of chitosan-functionalized CoFe2O4 nanoparticles for chemiluminescence sensing of hydrogen peroxide and glucose

Here, we report a highly simple and general protocol for functionalization of the CoFe(2)O(4) NPs with chitosan polymers in order to make CoFe(2)O(4) NPs disperse and stable in solution. The functionalized CoFe(2)O(4) NPs (denoted as CF-CoFe(2)O(4) NPs) were characterized by scanning electron microscope (SEM), thermogravimetric (TG), X-ray diffraction (XRD) and FT-IR spectra. It was found that the CoFe(2)O(4) NPs were successfully decorated and uniformly dispersed on the surface of chitosan without agglomeration. The CF-CoFe(2)O(4) NPs were found to increase greatly the radiation emitted during the CL oxidation of luminol by hydrogen peroxide. Results of ESR spin-trapping experiments demonstrated that the CF-CoFe(2)O(4) NPs showed catalytic ability to H(2)O(2) decomposition into ˙OH radicals. On this basis, a highly sensitive and rapid chemiluminescent method was developed for hydrogen peroxide in water samples and glucose in blood samples. Under optimum conditions, the proposed method allowed the detection of H(2)O(2) in the range of 1.0 × 10(-9) to 4.0 × 10(-6) M and glucose in the range of 5.0 × 10(-8) to 1.0 × 10(-5) M with detectable H(2)O(2) as low as 500 pM and glucose as low as 10 nM, respectively. This proposed method has been successfully applied to detect H(2)O(2) in environmental water samples and glucose in serum samples with good accuracy and precision.     

高铁酸盐在SnO2-Sb2O3/Ti电极上的选择性电化学合成

合成了SnO2-Sb2O3/Ti电极材料.实验结果证实,在14mol/LNaOH水溶液中和完全避免析氧反应的条件下,Fe(Ⅱ)物种在该电极上进行电化学氧化并生成FeO42-.结果表明,Fe(OH)3在浓NaOH溶液中发生酸式电离,形成可溶于水的FeO2-,该离子的浓度随着碱溶液浓度变化而发生明显变化,而且它还是发生化学氧化和电化学氧化的反应物.在SnO2-Sb2O3/Ti电极上,FeO42-的电化学还原起始电位为0.38V(vs.Hg/HgO,14mol/LNaOH),FeO2-电化学氧化起始电位为0.54V.结果还表明,用电化学方法氧化Fe(Ⅱ)物种生成FeO42-是个多步骤过程.