Love wave propagation in functionally graded piezoelectric material layer

An exact approach is used to investigate Love waves in functionally graded piezoelectric material (FGPM) layer bonded to a semi-infinite homogeneous solid. The piezoelectric material is polarized in z-axis direction and the material properties change gradually with the thickness of the layer. We here assume that all material properties of the piezoelectric layer have the same exponential function distribution along the x-axis direction. The analytical solutions of dispersion relations are obtained for electrically open or short circuit conditions. The effects of the gradient variation of material constants on the phase velocity, the group velocity, and the coupled electromechanical factor are discussed in detail. The displacement, electric potential, and stress distributions along thickness of the graded layer are calculated and plotted. Numerical examples indicate that appropriate gradient distributing of the material properties make Love waves to propagate along the surface of the piezoelectric layer, or a bigger electromechanical coupling factor can be obtained, which is in favor of acquiring a better performance in surface acoustic wave (SAW) devices.     

Love waves in functionally graded piezoelectric materials by stiffness matrix method

A numerical matrix method relative to the propagation of ultrasonic guided waves in functionally graded piezoelectric heterostructure is given in order to make a comparative study with the respective performances of analytical methods proposed in literature. The preliminary obtained results show a good agreement, however numerical approach has the advantage of conceptual simplicity and flexibility brought about by the stiffness matrix method. The propagation behaviour of Love waves in a functionally graded piezoelectric material (FGPM) is investigated in this article. It involves a thin FGPM layer bonded perfectly to an elastic substrate. The inhomogeneous FGPM heterostructure has been stratified along the depth direction, hence each state can be considered as homogeneous and the ordinary differential equation method is applied. The obtained solutions are used to study the effect of an exponential gradient applied to physical properties. Such numerical approach allows applying different gradient variation for mechanical and electrical properties. For this case, the obtained results reveal opposite effects. The dispersive curves and phase velocities of the Love wave propagation in the layered piezoelectric film are obtained for electrical open and short cases on the free surface, respectively. The effect of gradient coefficients on coupled electromechanical factor, on the stress fields, the electrical potential and the mechanical displacement are discussed, respectively. Illustration is achieved on the well known heterostructure PZT-5H/SiO₂, the obtained results are especially useful in the design of high-performance acoustic surface devices and accurately prediction of the Love wave propagation behaviour.     

Bleustein-Gulyaev waves in a functionally graded piezoelectric material layered structure

This work presents a theoretical study of the propagation behavior of Bleustein-Gulyaev waves in a layered structure consisting of a functionally graded piezoelectric material (FGPM) layer and a transversely isotropic piezoelectric substrate. The influence of the graded variation of FGPM coefficients on the dispersion relations of Bleustein-Gulyaev waves in the layered structure is investigated. It is demonstrated that, for a certain frequency range of Bleustein-Gulyaev waves, the mechanical perturbations of the particles are restricted in the FPGM layer and the phase velocity is independent of the electrical boundary conditions at the free surface. Results presented in this study can not only provide further insight on the electromechanical coupling behavior of surface waves in FGPM layered structures, but also lend a theoretical basis for the design of high-performance surface acoustic wave (SAW) devices. Supported by the National Natural Science Foundation of China (Grant No. 10632060), the National Basic Research Program of China (Grant No. 2006CB601202), the National 111 Project of China (Grant No. B06024), and the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20070698064)     

Bending analysis of a functionally graded piezoelectric cantilever beam

A new analysis based on Airy stress function method is presented for a functionally graded piezoelectric material cantilever beam. Assuming that the mechanical and electric properties of the material have the same variations along the thickness direction, a two-dimensional plane elasticity solution is obtained for the coupling electroelastic fields of the beam under different loadings. This solution will be useful in analyzing FGPM beam with arbitrary variations of material properties. The influences of the functionally graded material properties on the structural response of the beam subjected to different loads are also studied through numerical examples.     

Effect of initial stress on Love waves in a piezoelectric structure carrying a functionally graded material layer

The effect of initial stress on the propagation behavior of Love waves in a piezoelectric half-space of polarized ceramics carrying a functionally graded material (FGM) layer is analytically investigated in this paper from the three-dimensional equations of linear piezoelectricity. The analytical solutions are obtained for the dispersion relations of Love wave propagating in this kind of structure with initial stress for both electrical open case and electrical short case, respectively. One numerical example is given to graphically illustrate the effect of initial stress on dispersive curve, phase velocity and electromechanical coupling factor of the Love wave propagation. The results reported here are meaningful for the design of surface acoustic wave (SAW) devices with high performance.     

Wave propagation of functionally graded material plates in thermal environments

The wave propagation of an infinite functionally graded plate in thermal environments is studied using the higher-order shear deformation plate theory. The thermal effects and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the plate surface and varied in the thickness direction only. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. Considering the effects of transverse shear deformation and rotary inertia, the governing equations of the wave propagation in the functionally graded plate are derived by using the Hamilton’s principle. The analytic dispersion relation of the functionally graded plate is obtained by solving an eigenvalue problem. Numerical examples show that the characteristics of wave propagation in the functionally graded plate are relates to the volume fraction index and thermal environment of the functionally graded plate. The influences of the volume fraction distributions and temperature on wave propagation of functionally graded plate are discussed in detail. The results carried out can be used in the ultrasonic inspection techniques and structural health monitoring.     

Transverse surface waves in a layered structure with a functionally graded piezoelectric substrate and a hard dielectric layer

As to an ideally layered structure with a functionally graded piezoelectric substrate (material parameters change continuously along the thickness direction) and a hard dielectric layer, the existence and propagation behavior of transverse surface waves is studied by analytical technique. The dispersion equations for the existence of the transverse surface waves with respect to phase velocity are obtained for electrically open and short circuit conditions, respectively. A detailed investigation of the effect of gradient coefficient on dispersion relation, electromechanical coupling factor and penetration depth is carried out. It is found by numerical examples that adjusting gradient coefficient makes the electromechanical coupling factor of the transverse surface waves achieve quite high values at some appropriate ratio values of the layer thickness to the wavelength, and at the same time, the penetration depth can be reduced to the same order as the wavelength.     

Love-type waves in functionally graded piezoelectric material (FGPM) sandwiched between initially stressed layer and elastic substrate

This paper investigates the propagation behavior of Love-type surface waves in three-layered composite structure with initial stress. The composite structure has been taken in such a way that a functionally graded piezoelectric material (FGPM) layer is bonded between initially stressed piezoelectric upper layer and an elastic substrate. Using the method of separation of variables, frequency equation for the considered wave has been established in the form of determinant for electrical open and short cases on free surface. The bisection method iteration technique has been used to find the roots of the dispersion relations which give the modes for electrical open and short cases. The effects of gradient variation of material constant and initial stress on the phase velocity of surface waves are discussed. Dependence of thickness on each parameter of the study has been shown explicitly. Study has been also done to show the existence of cut-off frequency. Graphical representation has been done to exhibit the findings. The obtained results are significant for the investigation and characterization of Love-type waves in FGPM-layered media.     

Dynamic stress from a circular hole in a functionally graded piezoelectric/piezomagnetic material subjected to shear waves

An analytical method is applied to investigate the scattering of magneto-electro-elastic waves and dynamic stress around a circular hole in a functionally graded piezoelectric/piezomagnetic material layer. Analytical solutions of the wave, electric and magnetic fields are expressed by employing a wave function expansion method. Analyses show that the piezoelectric and piezomagnetic properties greatly affect the dynamic stress in the region of the intermediate frequency, and the effect increases with increasing non-homogeneous parameter. The effects of the incident wave number and non-homogeneous parameter of the materials on the dynamic stress and electric field are also examined.     

Three-dimensional analytical solution for a transversely isotropic functionally graded piezoelectric circular plate subject to a uniform electric potential difference

This paper studies the problem of a functionally graded piezoelectric circular plate subjected to a uniform electric potential difference between the upper and lower surfaces. By assuming the generalized displacements in appropriate forms, five differential equations governing the generalized displacement functions are derived from the equilibrium equations. These displacement functions are then obtained in an explicit form, which still involve four undetermined integral constants, through a step-by-step integration which properly incorporates the boundary conditions at the upper and lower surfaces. The boundary conditions at the cylindrical surface are then used to determine the integral constants. Hence, three-dimensional analytical solutions for electrically loaded functionally graded piezoelectric circular plates with free or simply-supported edge are completely determined. These solutions can account for an arbitrary material variation along the thickness, and thus can be readily degenerated into those for a homogenous plate. A numerical example is finally given to show the validity of the analysis, and the effect of material inhomogeneity on the elastic and electric fields is discussed. Supported by the National Natural Science Foundation of China (Grant Nos. 10472102 and 10432030) and the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20060335107)     

Control of sound and vibration for cylindrical shells by utilizing a periodic structure of functionally graded material

A periodic shell made of functionally graded material (FGM) is proposed in this Letter. Wave propagation and vibration transmission in the FGM periodic shell for different circumferential modes are investigated. By illustrating the dynamical behavior of the periodic FGM shell within the pass/stop band frequency ranges, the mechanism of wave propagation and vibration transmission in the shell are illuminated. Moreover, the suppression characteristics of structure-borne sound in the internal field of the shell, either within the stop or pass band frequency ranges, are studied.     

The effect of initial stress on the propagation behavior of SH waves in piezoelectric coupled plates

This study analytically investigates the propagation of shear waves (SH waves) in a coupled plate consisting of a piezoelectric layer and an elastic layer with initial stress. The piezoelectric material is polarized in z-axis direction and perfectly bonded to an elastic layer. The mechanical displacement and electrical potential function are derived for the piezoelectric coupled plates by solving the electromechanical field equations. The effects of the thickness ratio and the initial stress on the dispersion relations and the phase and group velocities are obtained for electrically open and mechanically free situations. The numerical examples are provided to illustrate graphically the variations of the phase and group velocities versus the wave number for the different layers comparatively. It is seen that the phase velocity of SH waves decreases with the increase of the magnitude of the initial compression stress, while it increases with the increase of the magnitude of the initial tensile stress. The initial stress has a great effect on the propagation of SH waves with the decrease of the thickness ratio. This research is theoretically useful for the design of surface acoustic wave (SAW) devices with high performance.     

运用功能梯度结构降低大功率激光系统中镜面热变形的数值分析

 提出一种运用功能梯度结构以有效降低大功率激光系统中镜子温度和镜面热变形以及减缓热应力的新方法。讨论了环形分布和高斯分布2种类型的激光源。有限元分析结果表明,通过这种方法可使硅镜和铜镜的表面热变形成倍降低,并且还能同时显著降低镜体温度。讨论了代表热学和力学性质的函数表达式的斜率对镜面热变形的影响,研究表明：功能梯度结构的热物理对镜面形变产生重大影响,而力学性质对镜面形变的影响非常小。该结论可为具有该功能梯度结构的镜子优化设计和制造提供参考。     

An analysis of surface acoustic wave propagation in a plate of functionally graded materials with a layered model

In a homogeneous plate, Rayleigh waves will have a symmetric and anti-symmetric mode regarding to the mid-plane with different phase velocities. If plate properties vary along the thickness, or the plate is of functionally graded material (FGM), the symmetry of modes and frequency behavior will be modified, thus producing different features for engineering applications such as amplifying or reducing the velocity and deformation. This kind of effect can also be easily realized by utilizing a layered structure with desired material properties that can produce these effects in terms of velocity and displacements, since Rayleigh waves in a solid with general material property grading schemes are difficult to analyze with known methods. Solutions from layered structures with exponential and polynomial property grading schemes are obtained from the layered model and comparisons with known analytical results are made to validate the method and examine possible applications of such structures in engineering. Supported by the National Natural Science Foundation of China (Grant Nos. 10432030, 10125209, and 10572065) and the Teaching and Research Award Program for Outstanding Young Teachers in Higher Education Institutions, Ministry of Education of China, and also supported by Qianjiang River Fellow Fund established by Zhejiang Provincial Government and Ningbo University and administered by Ningbo University, Zhejiang, China     

Nonlocal and surface effects on the buckling behavior of functionally graded nanoplates: An isogeometric analysis

The size-dependent static buckling responses of circular, elliptical and skew nanoplates made of functionally graded materials (FGMs) are investigated in this article based on an isogeometric model. The Eringen nonlocal continuum theory is implemented to capture nonlocal effects. According to the Gurtin–Murdoch surface elasticity theory, surface energy influences are also taken into account by the consideration of two thin surface layers at the top and bottom of nanoplate. The material properties vary in the thickness direction and are evaluated using the Mori–Tanaka homogenization scheme. The governing equations of buckled nanoplate are achieved by the minimum total potential energy principle. To perform the isogeometric analysis as a solution methodology, a novel matrix-vector form of formulation is presented. Numerical examples are given to study the effects of surface stress as well as other important parameters on the critical buckling loads of functionally graded nanoplates. It is found that the buckling configuration of nanoplates at small scales is significantly affected by the surface free energy.     

一种可提高压电复合材料d33和dh值的新型结构传感器

原理分析和实验结果证明了：通过一种含有空腔的金属电极与压电复合材料的界面作用，发迹了应力的作用式，提高了ｄ３３值；并使数值符号相反的ｄ３３和ｄ３１均对ｄｈ值起加大作用。     

Numerical simulation of laser-generated surface acoustic waves in the transparent coating on a substrate by the finite element method

The optimum finite element model in the system consisting of a transparent coating and an opaque substrate is established based on the analysis of two important parameters: meshing size and time step, and the stability of solution. Taking into account the temperature dependence of material properties, the transient temperature and temperature gradient field are obtained. According to the thermoelastic theory, this temperature gradient field can be taken as a buried bulk source to generate ultrasonic wave. The surface acoustic waves (SAWs) are obtained. The influence of the coating thickness on the SAWs is analyzed. The model provides a useful tool for the determination of modes which are generated by a laser source in transparent coating on opaque substrate. The surface skimming longitudinal wave exists for the multiple oscillations and it charges from unipolar waveforms to dipolar.     

Analytical study of the propagation of acoustic waves in a 1D weakly disordered lattice

This paper presents an analytical approach of the propagation of an acoustic wave through a normally distributed disordered lattice made up of Helmholtz resonators connected to a cylindrical duct. This approach allows to determine analytically the exact transmission coefficient of a weakly disordered lattice. Analytical results are compared to a well-known numerical method based on a matrix product. Furthermore, this approach gives an analytical expression of the localization length apart from the Bragg stopband which depends only on the standard deviation of the normal distribution disorder. This expression permits to study on one hand the localization length as a function of both disorder strength and frequency, and on the other hand, the propagation characteristics on the edges of two sorts of stopbands (Bragg and Helmholtz stopbands). Lastly, the value of the localization length inside the Helmholtz stopband is compared to the localization length in the Bragg stopband.     

Characterization of the variation of the material properties in a freestanding inhomogeneous thin film

This Letter presents a new technique for measuring the variation of the material properties along the thickness in a freestanding inhomogeneous thin film. The analytical results reveal a simple relation between the material properties and the set of cut-off frequencies of Lamb waves. The influence of the graded properties on the variation of cut-off frequencies in three different kinds of models, including artificial FGM model, sub-surface damage model, and nano-porous thin film model, is discussed. These results provide theoretical guidance for characterizing the material property variations of MEMS/NEMS.     

PEEM study of work function changes in Cu, Au and Pd metal surfaces with surface acoustic wave propagation

The effects of surface acoustic wave (SAW) on the work function of Cu, Au and Pd metal surfaces with different surface structures were studied by photoelectron emission microscopy (PEEM). SAW propagation produced bright PEEM images for Cu, Au and Pd metal surfaces consisting of high-index planes and step sites, whereas it yielded dark images for the metals exposing low-index planes, indicating that the SAW enhanced photoemission from rough metal surfaces containing coordinatively-unsaturated metal atoms and lowered that from densely packed smooth metal surfaces. Changes in the PEEM images with SAW-on and SAW-off were reversible and were associated with decreases and increases in the work function of the metal surfaces, respectively. The SAW caused periodic and vertical lattice displacement, and it was demonstrated that large lattice displacement was responsible for work function changes from coincidence between the patterns of photoemission and lattice displacement. A mechanism for work function changes is proposed on the basis of effects on the spatial structures and electronic properties of metal surfaces.