Applying sequential injection analysis (SIA) and response surface methodology for optimization of Fenton-based processes

This work presents the use of sequential injection analysis (SIA) and the response surface methodology as a tool for optimization of Fenton-based processes. Alizarin red S dye (C.I. 58005) was used as a model compound for the anthraquinones family, whose pigments have a large use in coatings industry. The following factors were considered: [H₂O₂]:[Alizarin] and [H₂O₂]:[FeSO₄] ratios and pH. The SIA system was designed to add reagents to the reactor and to perform on-line sampling of the reaction medium, sending the samples to a flow-through spectrophotometer for monitoring the color reduction of the dye. The proposed system fed the statistical program with degradation data for fast construction of response surface plots. After optimization, 99.7% of the dye was degraded and the TOC content was reduced to 35% of the original value. Low reagents consumption and high sampling throughput were the remarkable features of the SIA system.     

Pre-evaluation of metal ions as a catalyst on chemiluminometric sequential injection analysis with luminol-H2O2 system

Catalytic effect of metal ions on luminol chemiluminescence (CL) was investigated by sequential injection analysis (SIA). The SIA system was set up with two solenoid micropumps, an eight-port selection valve, and a photosensor module with a fountain-type chemiluminescence cell. The SIA system was controlled and the CL signals were collected by a LabVIEW program. Aqueous solutions of luminol, H₂O₂, and a sample solution containing metal ion were sequentially aspirated to the holding coil, and the zones were immediately propelled to the detection cell. After optimizing the parameters using 1 × 10⁻⁵ M Fe³⁺ solution, catalytic effect of some metal species was compared. Among 16 metal species examined, relatively strong CL responses were obtained with Fe³⁺, Fe²⁺, VO²⁺, VO₃⁻, MnO₄⁻, Co²⁺, and Cu²⁺. The limits of detection by the present SIA system were comparable to FIA systems. Permanganate ion showed the highest CL sensitivity among the metal species examined; the calibration graph for MnO₄⁻ was linear at the concentration level of 10⁻⁸ M and the limit of detection for MnO₄⁻ was 4.0 × 10⁻¹⁰ M (S/N = 3).     

Sensing hydrogen peroxide involving intramolecular charge transfer pathway: A boronate-functioned styryl dye as a highly selective and sensitive naked-eye sensor

The synthesis, properties and applications of a novel boronate-functioned styryl dye, BSD, as a colorimetric sensor for hydrogen peroxide is presented. The dye displayed remarkable color change from colorless (λ_max = 391 nm) to deep red (λ_max = 522 nm) in the presence of H₂O₂ and the behavior could be rationalized by the chemoselective H₂O₂-mediated transformation of arylboronate to phenolate, resulting in the release of the merocyanine dye which featured with strong intramolecular charge transfer (ICT) absorption band. The absorption increment of merocyanine at λ_max = 522 nm (? = 87000 L mol⁻¹ cm⁻¹) is linear with the concentration of H₂O₂ in the range of 1.0 × 10⁻⁷-2.5 × 10⁻⁵ mol L⁻¹ with the detection limit of 6.8 × 10⁻⁸ mol L⁻¹ under optimum conditions. There is almost no interference by other species that commonly exist due to the specific deprotection of H₂O₂ towards arylboronate group on BSD. The chromogenic sensor has been applied to the detection of trace amounts of hydrogen peroxide in rain water.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Factors influencing level of hydrogen peroxide in exhaled breath condensate

Hydrogen peroxide (H₂O₂) in exhaled breath condensate (EBC) has been proposed as a marker for oxidative stress in the airways. The aim of the present study was to evaluate the measurement of H₂O₂ in EBC with or without use of a nose clip, and the influence of mouth rinsing, sampling time and storage.An elevated H₂O₂ level was seen during nasal breathing compared to mouth breathing with nose clip (3.4 pmol/s vs. 2.1 pmol/s, p = 0.02). Breathing through the mouth, using a nose clip, was therefore practiced in all experiments. The H₂O₂ levels were increased when mouth rinsing was performed using an acid buffer (1.4 pmol/s vs. 1.9 pmol/s, p = 0.03). 15 min sampling time decreased the H₂O₂ output by almost 50% compared with 2 min sampling time (1.2 vs. 0.6 pmol/s, p = 0.03). When samples were left unattended for 15 min no change in H₂O₂ concentration in the EBC was seen.We found no significant differences in H₂O₂ levels between samples stored for 4 weeks at − 80 °C and samples analysed directly; however, a significant decrease in the levels was seen for samples stored for 4 weeks at − 20 °C.In conclusion, the method of EBC collection and storage plays an important role in reducing variability within and between individuals.     

A rare multi-coordinate tellurite, NH4ATe4O9·2H2O (ARb or Cs): The occurrence of TeO3, TeO4, and TeO5 Polyhedra in the same material

Two new tellurites, NH₄RbTe₄O₉·2H₂O and NH₄CsTe₄O₉·2H₂O have been synthesized and characterized. The compounds were synthesized hydrothermally, in near quantitative yields, using the alkali metal halide, TeO₂, and NH₄OH as reagents. The iso-structural materials exhibit layered, two-dimensional structural topologies consisting of TeO_x (x=3, 4, or 5) polyhedra separated by NH₄⁺, H₂O, Rb⁺ or Cs⁺ cations. Unique to these materials is the presence of TeO₃, TeO₄, and TeO₅ polyhedra. Thermogravimetric and infrared spectroscopic data are also presented. Crystal data: NH₄RbTe₄O₉·2H₂O: Monoclinic I2/a (no. 15), a=18.917(3) Å, b=6.7002(11) Å, c=21.106(5) Å, β=101.813(2)°, V=2618.5(9) Å³, Z=8; NH₄CsTe₄O₉·2H₂O: Monoclinic I2/a (no. 15), a=18.9880(12) Å, b=6.7633(4) Å, c=21.476(2) Å, β=102.3460(10)°, V=2694.2(3) Å³, Z=8.     

Similarities and differences of epoxide, aldehyde and peroxide initiators for Cp2TiCl-catalyzed styrene living radical polymerizations

Cp₂TiCl is the first example of a single electron transfer (SET) agent that both provides initiating radicals from three different types of functionalities (i.e. radical ring opening of epoxides and reduction of aldehydes and peroxides) and doubles as mediator for the living radical polymerization of styrene (St) by reversibly endcapping the growing polymer chains. An initiator (I) comparison was performed using 1,4-butanediol diglycidyl ether (BDE), benzaldehyde (BA) and benzoyl peroxide (BPO) as models. The investigation of the effect of reaction variables was carried out over a wide range of experimental conditions ([Cp₂TiCl₂]/[I] = 0.5/1-4/1; [Zn]/[Cp₂TiCl₂] = 0.5/1-3/1, [St]/[I] = 50/1-400/1 and T = 60-130 °C) to reveal living polymerization features such as a linear dependence of molecular weight on conversion and narrow molecular weight distribution (M_w/M_n) for each initiator class. However, progressively lower polydispersities and larger initiator efficiencies are obtained with increasing the [Cp₂TiCl₂]/[I] and [Zn]/[Cp₂TiCl₂] ratios and with decreasing temperature. Accordingly, optimum conditions correspond to [St]/[I]/[Cp₂TiCl₂]/[Zn] = [50-200]/[1]/[2-3]/[4-6] at 70-90 °C. By contrast to peroxides, aldehydes and the more reactive epoxides provide alcohol end groups useful in block or graft copolymers synthesis.     

Transition metal tetramolybdate dihydrates MMo4O13·2H2O (M=Co,Ni) having a novel pillared layer structure

Hydrothermal synthesis in the M/Mo/O (M=Co,Ni) system was investigated. Novel transition metal tetramolybdate dihydrates MMo₄O₁₃·2H₂O (M=Co,Ni), having an interesting pillared layer structure, were found. The molybdates crystallize in the triclinic system with space group P−1, Z=1 with unit cell parameters of a=5.525(3) Å, b=7.058(4) Å, c=7.551(5) Å, α=90.019(10)°, β=105.230(10)°, γ=90.286(10)° for CoMo₄O₁₃·2H₂O, and a=5.508(2) Å, b=7.017(3) Å, c=7.533(3) Å, α=90.152(6)°, β=105.216(6)°, γ=90.161(6)° for NiMo₄O₁₃·2H₂O The structure is composed of two-dimensional molybdenum-oxide (2D Mo-O) sheets pillared with CoO₆ octahedra. The 2D Mo-O sheet is made up of infinite straight ribbons built up by corner-sharing of four molybdenum octahedra (two MoO₆ and two MoO₅OH₂) sharing edges. These infinite ribbons are similar to the straight ones in triclinic-K₂Mo₄O₁₃ having 1D chain structure, but are linked one after another by corner-sharing to form a 2D sheet structure, like the twisted ribbons in BaMo₄O₁₃·2H₂O (or in orthorhombic-K₂Mo₄O₁₃) are.     

A microband lactate biosensor fabricated using a water-based screen-printed carbon ink

The present study demonstrated for the first time that screen-printed carbon microband electrodes fabricated from water-based ink can readily detect H₂O₂ and that the same ink, with the addition of lactate oxidase, can be used to construct microband biosensors to measure lactate. These microband devices were fabricated by a simple cutting procedure using conventional sized screen-printed carbon electrodes (SPCEs) containing the electrocatalyst cobalt phthalocyanine (CoPC). These devices were characterised with H₂O₂ using several electrochemical techniques. Cyclic voltammograms were found to be sigmoidal; a current density value of 4.2 mA cm⁻² was obtained. A scan rate study revealed that the mass transport mechanism was a mixture of radial and planar diffusion. However, a further amperometric study under quiescent and hydrodynamic conditions indicated that radial diffusion predominated. A chronoamperometric study indicated that steady-state currents were obtained with these devices for a variety of H₂O₂ concentrations and that the currents were proportional to the analyte concentration. Lactate microband biosensors were then fabricated by incorporating lactate oxidase into the water-based formulation prior to printing and then cutting as described. Voltammograms demonstrated that lactate oxidase did not compromise the integrity of the electrode for H₂O₂ detection. A potential of +400 mV was selected for a calibration study, which showed that lactate could be measured over a dynamic range of 1-10 mM which was linear up to 6 mM; a calculated lower limit of detection of 289 μM was ascertained. This study provides a platform for monitoring cell metabolism in-vitro by measuring lactate electrochemically via a microband biosensor.     

“Oxidative etching-aggregation” of silver nanoparticles by melamine and electron acceptors: An innovative route toward ultrasensitive and versatile functional colorimetric sensors

An innovative and versatile functional colorimetric sensor for melamine (MA) and H₂O₂ was developed with simplicity, excellent selectivity and ultrasensitivity. The detection mechanism was based on the “oxidative etching-aggregation” of silver nanoparticles (AgNPs) by the cooperation effect of MA and electron acceptors such as H₂O₂, ozone or Fe(NO₃)₃. The detection limits of this method for MA could reach as low as 0.08 nM, 0.16 nM and 3 nM when H₂O₂, ozone or Fe(NO₃)₃ was used as an electron acceptor, respectively. When using H₂O₂ as a typical electron acceptor, the method enabled the detection of H₂O₂ with a detection limit of 0.2 nM. This proposed method offered a new way to design MA and H₂O₂ sensors and might be easily extended to detect other nucleophilic reagents and electron acceptors based on colorimetric sensors.     

Magnetic and charge transport properties of the Na-based Os oxide pyrochlore

The Na-based osmium oxide pyrochlore was synthesized for the first time by an ion-exchange method using KOs₂O₆ as a host. The composition was identified as Na_1.4Os₂O₆·H₂O by electron probe micro-analysis, thermogravimetric analysis, and structural analysis using synchrotron X-ray diffraction. Na_1.4Os₂O₆·H₂O crystallizes in a regular pyrochlore structure with some defects (space group: Fd-3m, a=10.16851(1) Å). Electrical resistivity, heat capacity, and magnetization measurements clearly showed absence of superconductivity down to 2 K, being in large contrast to what was found for the β-type pyrochlore superconductor AOs₂O₆ (A=Cs, Rb, and K). The Sommerfeld coefficient is 22 mJ K⁻² mol⁻¹, being the smallest among AOs₂O₆. A magnetic anomaly at ∼57 K and associated magneto-resistance (+3.7% at 2 K in 70 kOe) were found.     

A luminol-based micro-flow-injection electrochemiluminescent system to determine reactive oxygen species

A flow injection analysis (FIA) system with electrochemiluminescent (ECL) detection has been established. Based on a specially designed flow-through ECL cell with a very simple structure, the system possesses rapid response and high sensitivity. With luminol as the ECL reagent, the response of hydrogen peroxide (H₂O₂) was investigated on the developed FIA-ECL system. After optimizing the experimental conditions, such as the electric parameters, the buffer condition and the flow rate, it was demonstrated that the developed FIA-ECL system works well for quantified assays. Compared with reported works, the present results indicate that the developed FIA-ECL system has the lowest limit of detection (S/N = 3) of 3.0 × 10⁻⁹ mol/L for H₂O₂, which is equal to the level of chemiluminescence (CL). The developed system was successfully used to monitor the yield of reactive oxygen species (ROSs) in water vapour during the work of an ultrasonic humidifier with H₂O₂ as index. And the amount of ROSs in some other real samples, including tap water, drinking water and river water was detected with recoveries from 92.0% to 106%.     

Characterization of an aluminium(III)–citrate species by means of ion chromatography with inductively coupled plasma-atomic emission spectrometry detection

The aluminium(III)–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O was characterized using anion exchange chromatography on-line coupled with the element specific ICP-AES detector. Time-dependent monitoring of individual species in aqueous solution at different temperatures gave information about the species stability and the decomposition pathway. The aluminium–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O disintegrated via an unknown intermediary Al(III)–citrate species from which the thermodynamically stable complex [Al₃(C₆H₄O₇)₃(OH)(H₂O)]⁴⁻ was formed. The activation energy for the decomposition reaction and the pre-exponential factor were determinated to be E_a = 81.95 kJ mol⁻¹ and A = 3.62 × 10¹³ s⁻¹.     

Thermodynamic stability and hydration enthalpy of strontium cerate doped with yttrium

The standard molar enthalpy of formation of SrY_0.05Ce_0.95O_2.975 has been derived by combining the enthalpy of solution in 1 M HCl + 0.1 KI with auxiliary literature data, Δ_fH° (SrY_0.05Ce_0.95O_2.975, s, 298.15 K) = −1720.4 ± 3.4 kJ/mol. The formation enthalpy of SrY_0.05Ce_0.95O_2.975 from the mixture of binary oxides is Δ_oxH° (298.15 K) = −45.9 ± 3.4 kJ/mol and the enthalpy of reaction of SrY_0.05Ce_0.95O_2.975 with water forming Sr(OH)₂, CeO₂, and Y₂O₃ is Δ_rH° (298.15 K) = −85.5 ± 3.4 kJ/mol. Our data and the entropies of different substances show that SrY_0.05Ce_0.95O_2.975 is thermodynamically stable with respect to a mixture of SrO, Y₂O₃, CeO₂ and that the reaction of SrY_0.05Ce_0.95O_2.975 with water is thermodynamically favourable.     

FIA-near-infrared spectrofluorimetric trace determination of hydrogen peroxide using tricarchlorobocyanine dye (Cy.7.Cl) and horseradish peroxidase (HRP)

A new kind of near-infrared fluorescence agent, tricarbochlorocyanine dye (Cy.7.Cl), had been synthesized in house and used for near-infrared spectrofluorimetric determination of hydrogen peroxide (H₂O₂) by flow injection analysis (FIA) for the first time. The oxidation reaction of Cy.7.Cl with H₂O₂ occurred under the catalysis of horseradish peroxidase (HRP) and it was studied in detail. The possible reaction mechanism was discussed. Under optimal experimental conditions, fluorescence from Cy.7.Cl displayed excitation and emission maxima (ex/em) at 780 and 800 nm, respectively. The two linear working ranges were 1.86 × 10⁻⁷ to 4.11 × 10⁻⁷ mol L⁻¹ and 4.11 × 10⁻⁷ to 7.19 × 10⁻⁶ mol L⁻¹, respectively. The detection limit was 5.58 × 10⁻⁸ mol L⁻¹ of H₂O₂. The effect of interferences was studied. The proposed method was successfully applied to the determination of hydrogen peroxide in rainwater, serum and plant samples.     

Effect of ring substituents on crystal packing and H-bonding in a series of halobis(phen)copper(II) arylphosphonic acid complexes

The synthesis and crystal structures of five new analogues of the supramolecular copper(II) organophosphonate [Cu^II(phen)₂Cl][(C₆H₅PO(OH)₂)((OH)O₂PC₆H₅)] (1) are presented. The structures contain substituted phenylphosphonic acids, and are of the general formula [Cu^II(phen)₂Cl][(XPO(OH)₂)((OH)O₂PX)] · Z, where X = o-CH₃(C₆H₅) (2); X = p-CH₃(C₆H₅), Z = H₂O · 2CH₃CH₂OH (4); X = o-NO₂(C₆H₅), m-NO₂(C₆H₅) (5); X = m-NO₂(C₆H₅) (6); X = C₁₀H₇ (7).     

Study on oxidative degradation behaviors of polyesterurethane network

In this study H₂O₂/CoCl₂ system was used as an oxidative environment to investigate the in vitro degradation behavior of a crosslinked polyesterurethane network. Weight loss, water absorption, mechanical properties, swelling degree and gel content were determined as a function of degradation time. The results showed that the H₂O₂/CoCl₂ system could effectively accelerate the degradation of the polyurethanes. The samples had almost completely degraded after 84 days of incubation in a 3% H₂O₂/2% CoCl₂ solution at 37 °C. The weight loss process could be approximately divided into three major phases: the weight decreased slowly during an induction phase (1), which was followed by a phase characterized by accelerated weight loss (2), and finally by a phase showing slow linear weight loss until complete erosion (3). The attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra of degraded polyurethane networks showed that the polyurethane underwent chain scission of the copolyester segment chains, and the joints of copolyester and 2,2,4- and 2,4,4-trimethylhexamethylene during degradation in the oxidative environment. The glass transition temperature of degraded polyesterurethane networks decreased significantly with increasing degradation time. From these results the H₂O₂/CoCl₂ system can be used as an oxidative condition to evaluate the in vitro degradability of polyesterurethane.     

Simple sequential injection analysis system for rapid determination of microalbuminuria

A simple, specific and sensitive sequential injection analysis (SIA) system based on non-immunoassay fluorescent detection has been developed for the determination of urinary albumin. The specific binding of the dye Albumin Blue 580 (AB 580) to albumin in urine generated high emission fluorescent signals. The excitation and emission wavelengths were set at 590 and 610 nm, respectively. The analytical range was obtained from 1 to 100 mg L⁻¹, with a detection limit of 0.3 mg L⁻¹ (S/N = 3). The SIA system gave high precision with relative standard deviations (R.S.D.s) of 0.9% and 1.4% when evaluated with 15 and 100 mg L⁻¹ albumin (n = 15), respectively. The method exhibited good reproducibility, as assessed by performing four analytical curves on different days, and intra-run CVs (2.3-3.3%) and inter-run CVs (3.8%) were obtained. Rapid operation was achieved with a sample throughput of 37 h⁻¹. This method was successfully applied to the determination of urinary albumin, and the method was highly correlated with the immunoturbidimetric method (r² = 0.965; n = 72).     

A dual-amplification aptasensor for highly sensitive detection of thrombin based on the functionalized graphene-Pd nanoparticles composites and the hemin/G-quadruplex

In this work, an advanced sandwich-type electrochemical aptasensor for thrombin was proposed by integrating hemin/G-quadruplex with functionalized graphene-Pd nanoparticles composites (PdNPs-RGs). The hemin/G-quadruplex formed by intercalating hemin into thrombin binding aptamer (TBA), firstly acted as a NADH oxidase, assisting the oxidation of NADH to NAD⁺ accompanying with the generation of H₂O₂ in the presence of dissolved O₂. Subsequently, the hemin/G-quadruplex acted as HRP-mimicking DNAzyme that rapidly bioelectrocatalyze the reduction of the produced H₂O₂. At the same time, the Pd nanoparticles supported on p-iodoaniline functionalized graphene were also adopted to catalyze the reduction of H₂O₂. Thus, with the dual catalysis, a dramatically amplified electrochemical signal could be obtained. Besides, the avidin–biotin system for binding aptamer sequences on electrodes not only improved the sensitivity of thrombin analysis but also obtained an acceptable repeatability of the aptasensor. With several factors mentioned above, a wide linear ranged from 0.1 pM to 50 nM was acquired with a relatively low detection limit of 0.03 pM (defined as S/N = 3). These excellent performances provided our approach a promising way for ultrasensitive assay in electrochemical aptasensors.     

Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.