Nonlinear dynamics with higher-order modes in lithium niobate waveguide arrays

We present theoretical and experimental studies on nonlinear beam propagation in lithium niobate waveguide arrays utilizing higher-order second harmonic bands. We find that the implementation of the higher-order second harmonic bands leads to a number of new effects. The combined interaction of two second harmonic bands with a propagating fundamental beam can lead to a complete inhibition of nonlinear effects or to the formation of discrete spatial solitons, depending only on the wavelength of the fundamental wave. Furthermore we analyze the properties of discrete solitons, allowing for linear coupling of the second harmonic. Here we predict and demonstrate experimentally a power dependent phase transition of the soliton topology.     

On-chip erbium-doped lithium niobate waveguide amplifiers

Lithium niobate on insulator[LNOI],as an emerging and promising optical integration platform,faces shortages of on-chip active devices including lasers and ampl...     

Recent progress of second harmonic generation based on thin film lithium niobate

Recently,nonlinear photonics has attracted considerable interest.Among the nonlinear effects,second harmonic generation[SHG]remains a hot research topic.The rec...     

Advances in channel waveguide lithium niobate integrated optics

Recent advances in single-mode channel waveguide lithium niobate integrated optics are reviewed. Fabrication technology, the range of devices, and applications in telecommunications, signal processing and sensing are discussed.     

Analysis of THz-wave surface-emitted difference-frequency generation in periodically poled lithium niobate waveguide

It was shown that the periodically poled LiNbO₃-waveguide with period of poling λ≈λ/n_g (λ is the wavelength of emitted THz-wave, n_g is a refractive index corresponding to optical group velocity) emits THz-wave difference-frequency generation (DFG) in the direction normal to the surface of the planar waveguide. The 5% distinction between the manufactured and required periods of gratings results only in a small deflection (∼6°) of the output THz-beam from the normal direction. The dependence of DFG efficiency on mode size is analyzed. The output THz power at λ=150 μm is estimated as 2 mW, taking into account imperfections in coupling incident beams with guided modes. It was shown that the efficiency of THz-wave DFG in surface-emitting geometry is more than for collinear geometry in bulk crystal, especially in the high-absorption wavelength region. Received: 16 May 2001 / Revised version: 13 August 2001 / Published online: 2 November 2001     

The superprism effect in lithium niobate photonic crystals for ultra-fast, ultra-compact electro-optical switching

We numerically analyze ultra-refraction and slow-light in lithium niobate photonic crystals in order to investigate and then optimize the efficiency of a tunable photonic crystal superprism. In contrast to a passive superprism 1-to-N demultiplexer, we describe a tunable bandpass filter with only three output ports. The electro-optic effect in lithium niobate is used to achieve tunability, with the filter bandwidth shifting in wavelength as the refractive index of the superprism is modified by an externally applied electric field. Such a device could be used to realize a compact and fast wavelength multiplexer/demultiplexer for telecommunications or optical interconnect applications. We calculate constant frequency dispersion contours (plane-wave expansion) to identify initial configurations that show significant ultra-refraction, and verify the expected behavior of light propagation inside the structure using 2D FDTD (finite difference time domain) simulations. We show that the voltage requirements of such an electro-optically tunable superprism could potentially be relaxed by exploiting the enhancement of the electro-optic effect recently discovered by our group [M. Roussey, M.-P. Bernal, N. Courjal, D. Van Labeke, F.I. Baida, Electro-optic effect exaltation on lithium niobate photonic crystals due to slow photons. Appl. Phys. Lett. 89 (24) (2006) 241110], which we believe to be due to the presence of slow-light in the nanostructure. We present a methodology that readily identifies superprism design points showing both strong ultra-refraction as well as low group velocity. However, we find that this improved voltage efficiency comes at the cost of reduced operating bandwidth and increased insertion losses due to proximity to the band-edge.     

Laser-assisted fabrication of new slab-coupled lithium niobate optical waveguide

Recently a new type of lithium niobate waveguide was suggested for potential nonlinear optic applications. The waveguide consists of a uniform large core and a leaky coupled slab for realizing a lateral optical confinement to support the fundamental spatial mode propagation. Inside the waveguide, the slab layer is required to have a refractive index slightly lower than that of the core, but higher than that of the substrate. Lithium niobate doped with magnesium oxides shows an increased refractive index that is dependent on the dopant's concentration. Therefore, in order to fabricate such waveguides, the pulsed laser deposition approach was used to study the growth of such composition-modified lithium niobate as the slab layer. The as-grown films were characterized on its expitaxy, structure, and optical performance, via X-ray diffraction analysis, optical guiding experiment, etc.     

Broadband and lossless lithium niobate valley photonic crystal waveguide

We investigate the influences of structure parameters and interface shapes on the bandwidth of the edge state of lithium niobate valley photonic crystals.By inc...     

On-chip erbium-doped lithium niobate waveguide amplifiers [Invited]

Lithium niobate on insulator(LNOI), as an emerging and promising optical integration platform, faces shortages of on-chip active devices including lasers and amplifiers. Here, we report the fabrication of on-chip erbium-doped LNOI waveguide amplifiers based on electron beam lithography and inductively coupled plasma reactive ion etching. A net internal gain of ～30 d B/cm in the communication band was achieved in the fabricated waveguide amplifiers under the pump of a974 nm continuous laser. This work develops new active devices on LNOI and may promote the development of LNOI integrated photonics.     

Recent progress of second harmonic generation based on thin film lithium niobate [Invited]

Recently, nonlinear photonics has attracted considerable interest. Among the nonlinear effects, second harmonic generation(SHG) remains a hot research topic. The recent development of thin film lithium niobate(TFLN) technology has superior performances to the conventional counterparts. Herein, this review article reveals the recent progress of SHG based on TFLN and its integrated photonics. We mainly discuss and compare the different techniques of TFLN-based structures to boost the nonlinear performances assisted by localizing light in nanostructures and structured waveguides.Moreover, our conclusions and perspectives indicate that more efficient methods need to be further explored for higher SHG conversion efficiency on the TFLN platform.     

Photonic band-gap enhanced second-harmonic generation in a planar lithium niobate waveguide

Enhanced second-harmonic generation (SHG) conversion efficiency was theoretically predicted in waveguide geometry with coupling to a one-dimensional grating photonic band gap (PBG). We report a series of experiments using samples made with lithium niobate. A waveguide was fabricated near the surface by applying the proton-exchange technique. The characteristics of waveguide modes were determined by several techniques: prism coupling, diffraction, and Cherenkov radiation. The WKB method was used to analyze the results. Ultraviolet laser lithography was applied to make PBG gratings on the sample. We further investigated Cherenkov second-harmonic generation (CSHG), i.e., SHG radiated into the substrate, under the condition of a band-edge PBG resonance in the waveguides. The SHG inside planar waveguides was also experimentally investigated. We fabricated waveguides with multiple pump modes and found that the second mode was more efficient in enhancing the second harmonic signal. This result is explained by our model. Several samples were investigated in detail; the highest conversion efficiency of CSHG with a PBG was enhanced around 50 times above the CSHG signal without a PBG. A numerical model was constructed with parameters calculated from our sample characterization data to interpret the experimental results.     

Spatial ultrafast switching and frequency conversion in lithium niobate waveguide arrays

We demonstrate phase-insensitive, ultrafast, all-optical spatial switching and frequency conversion in quadratically nonlinear waveguide arrays in periodically poled lithium niobate. Routing of milliwatt signals with wavelengths in the communication band (1550 nm) is achieved without pulse distortions by parametric interaction with a control beam with 10-W power and wavelengths near 775 nm.     

Hybrid mono-crystalline silicon and lithium niobate thin films

The heterogeneous integration of silicon thin film and lithium niobate[LN]thin film combines both the advantages of the excellent electronics properties and mat...     

Iron doping of lithium niobate by thermal diffusion from thin film: study of the treatment effect

Thermal diffusion from thin film is one of the most widespread approaches to prepare iron doped regions in lithium niobate with limited size for photorefractive applications. In this work, we investigate the doping process with the aim of determining the best process conditions giving a doped region with the characteristics required for photorefractive applications. Six samples were prepared by changing the atmosphere employed in the diffusion treatment in order to obtain different combination of diffusion profiles and reduction degrees and also to check the effect of employing a wet atmosphere. The compositional, optical, and structural properties are then extensively characterized by combining Secondary ion Mass Spectrometry, UV, visible and IR spectrophotometry, High Resolution X-Rays Diffraction, and Micro-Raman Spectroscopy. Moreover, the sample topography was checked by Atomic Force Microscopy. An analysis of all our data shows that the best results are obtained performing a double step process, i.e. diffusion in oxidizing atmosphere and subsequent reduction at lower temperature in an hydrogen-containing atmosphere.     

Multiple-mode phase matching in a single-crystal lithium niobate waveguide for three-wave mixing

Developing natural free space frequency upconversion is essential for photonic integrated circuits. In a singlecrystal lithium niobate thin film planar waveguide of less than 1 μm thickness, we achieve type I and type II mode phase-matching conditions simultaneously for this thin film planar waveguide. Finally, by employing the mode phase matching of e t e → e with d_(33) at 1018 nm, we successfully achieve a green second-harmonic wave output with the conversion efficiency of 0.12%∕(W·cm~2), which verifies one of our simulation results. The rich mode phase matching for three-wave mixing in a thin film planar waveguide may provide a potential application in on-chip frequency upconversions for integrated photonic and quantum devices.     

Low-voltage tunable second-harmonic generation in an x-cut periodically poled lithium niobate waveguide

We report a new method of tuning the second-harmonic signal generated in a periodically poled lithium niobate (PPLN) waveguide. This technique relies on the recent progress in the fabrication of PPLNs on x-cut substrates along with periodical coplanar electrodes to reduce the tuning voltage while preserving the conversion efficiency. Our scheme exploits a type I interaction implemented in a titanium waveguide to impede cancellation of the electro-optical coefficients and to minimize the group-velocity mismatch between the first- and second-harmonic modes. The tuning range covers 58 nm with an applied voltage of +/-150 V.     

Photon pair generation in lithium niobate waveguide periodically poled by femtosecond laser

Reliable generation of single photons is of key importance for fundamental physical experiments and quantum protocols.The periodically poled lithium niobate [LN) waveguide has shown promise for an integrated quantum source due to its large spectral tunability and high efficiency, benefiting from the quasi-phase-matching. Here we demonstrate photon-pair sources based on an LN waveguide periodically poled by a tightly focused femtosecond laser beam. The pair coincidence rate reaches ～8000 counts p...     

Effect of dimension variation for second-harmonic generation in lithium niobate on insulator waveguide

We study the effect of dimension variation for second-harmonic generation[SHG]in lithium niobate on insulator[LNOI]waveguides.Non-trivial SHG profiles in both t...     

Amplitude squeezing by means of quasi-phase-matched second-harmonic generation in a lithium niobate waveguide

We demonstrate that traveling-wave second-harmonic generation produces amplitude-squeezed light at both the fundamental and the harmonic frequencies. Quasi-phase-matched second-harmonic conversion efficiencies approaching 60% were obtained in a 26-mm-long single-mode LiNbO(3) waveguide with pulses from a mode-locked laser at 1.53 microm. The amplitude noise of the transmitted fundamental field was measured to be 0.8 dB below the shot-noise level, and the generated 0.765-microm harmonic light was measured to be amplitude squeezed by 0.35 dB. The conversion-efficiency dependence of the observed squeezing at both wavelengths agrees with theoretical predictions. Waveguide losses appear to degrade the squeezing, but the maximum observed squeezing is currently limited only by the available input power.     

Photonic waveguide structures in photorefractive lithium niobate with pyroelectric mechanism of nonlinear response

Compensation for the nonlinear diffraction of narrow laser beams with wavelengths of 532 and 633nm and the formation of photonic waveguides and waveguide circuits due to the contribution of pyroelectric effect to the nonlinear response of lithium niobate crystal have been experimentally demonstrated. Complete compensation for the linear and nonlinear diffraction broadening of light beams is obtained upon uniform heating of an undoped sample from room temperature to 55?C.