Effects of oligonucleotide adsorption on the physicochemical characteristics of a nanoparticle-based model delivery system for antisense drugs

Cationic polystyrene nanoparticles, as a model drug carrier system for nucleic acids, are capable of binding negatively charged oligonucleotides by multiple electrostatic interactions. The effect of the adsorption of phosphorothioate oligonucleotides on the physicochemical properties of the carrier system was investigated for uncoated and sterically stabilized latex particles. Turbidity measurements and photon-correlation spectroscopy indicate that the colloidal stability of the nanoparticle-oligonucleotide conjugates is influenced by the number of oligonucleotides adsorbed on the carrier. Especially in the case of the uncoated material, a destabilizing effect has been observed up to oligonucleotide concentrations of 2.7 μmol/g polymer. Strikingly, at higher concentrations the latexes exhibit colloidal stability similar to the oligonucleotide-free samples. These results were correlated to zeta-potential measurements demonstrating a reversal from positive to negative values of the zeta potential with increasing oligonucleotide concentration. The points of zero charge of the particles are in the region of maximum coagulation. These findings were compared to adsorption studies and calculations based on the random sequential adsorption model. It appears that at first the colloidal stability of the carrier systems is diminished with increasing oligonucleotide adsorption, while higher surface coverages lead to a significant reduction in coagulation. At the saturation level the surface coverage can be considered as a monolayer of “side-on” adsorbed molecules and the conjugates exhibit colloidal stability similar to the bare particles without adsorbed molecules. Received: 20 April 1998 Accepted: 16 July 1998     

Phase behavior of charge stablized colloid dispersion with added water soluble polymers

Demixing and colloidal crystallization in the mixture of charge stabilized colloidal poly(methyl methacrylate) particles and soluble poly(ethylene oxide) were investigated by means of synchrotron small-angle X-ray scattering (SAXS) technique. Phase diagram of the mixture was obtained based on visual inspection and SAXS results. The phase behavior is determined as a function of the concentration of the polymer as well as the volume fraction of the colloidal particles. The system shows a one phase region when the concentration of the polymer is low, whereas a two-phase region is present when the concentration of the polymer is larger than a critical concentration at certain volume fraction of the colloids. Interestingly, a face centered cubic colloidal crystalline structure was formed under certain conditions, which has been rarely observed in experiments of colloid-polymer mixtures with competing interactions.     

Polymeric membranes: Surface modification for minimizing (bio)colloidal fouling

This paper presents an overview on recent developments in surface modification of polymer membranes for reduction of their fouling with biocolloids and organic colloids in pressure driven membrane processes. First, colloidal interactions such as London–van der Waals, electrical, hydration, hydrophobic, steric forces and membrane surface properties such as hydrophilicity, charge and surface roughness, which affect membrane fouling, have been discussed and the main goals of the membrane surface modification for fouling reduction have been outlined. Thereafter the recent studies on reduction of (bio)colloidal of polymer membranes using ultraviolet/redox initiated surface grafting, physical coating/adsorption of a protective layer on the membrane surface, chemical reactions or surface modification of polymer membranes with nanoparticles as well as using of advanced atomic force microscopy to characterize (bio)colloidal fouling have been critically summarized.     

Mixed adsorption of poly(vinylpyrrolidone) and sodium dodecylbenzenesulfonate on kaolinite

The mixed adsorption of the nonionic polymer poly(vinylpyrrolidone) (PVP) and the anionic surfactant sodium dodecylbenzenesulfonate (SDBS) on kaolinite has been studied. Both components adsorb from their mixture onto the clay mineral. The overall adsorption process is sensitive to the pH, the electrolyte concentration, and the amounts of polymer and surfactant. Interpretation of the experimental data addresses also the patchwise heterogeneous nature of the clay surface. In the absence of PVP, SDBS adsorbs on kaolinite by electrostatic and hydrophobic interactions. However, when PVP is present, surfactant adsorption at 10(-2) M NaCl is mainly driven by charge compensation of the edges. The adsorption of PVP from the mixture shows similar behavior under different conditions. Three regions can be distinguished based on the changing charge of polymer-surfactant complexes in solutions with increasing SDBS concentration. At low surfactant content, PVP adsorbs by hydrogen bonding and hydrophobic interactions, whereas electrostatic interactions dominate at higher surfactant concentrations. Over the entire surfactant concentration range, polymer-surfactant aggregates are present at the edges. The composition of these surface complexes differs from that in solution and is controlled by the surface charge.     

Electrokinetic behavior and colloidal stability of polystyrene latex coated with ionic surfactants

This work is focused on analyzing the electrokinetic behavior and colloidal stability of latex dispersions having different amounts of adsorbed ionic surfactants. The effects of the surface charge sign and value, and the type of ionic surfactant were examined. The analysis of the electrophoretic mobility (mu(e)) versus the electrolyte concentration up to really high amounts of salt, much higher than in usual studies, supports the colloidal stability results. In addition, useful information to understand the adsorption isotherms was obtained by studying mu(e) versus the amount of the adsorbed surfactant. Aggregation studies were carried out using a low-angle light scattering technique. The critical coagulation concentrations (ccc) of the particles were obtained for different surfactant coverage. For latex particles covered by ionic surfactants, the electrostatic repulsion was, in general, the main contribution to the colloidal stability of the system; however, steric effects played an important role in some cases. For latices with not very high colloidal stability, the adsorption of ionic surfactants always improved the colloidal stability of the dispersion above certain coverage, independently of the sign of both, latex and surfactant charge. This was in agreement with higher mobility values. Several theoretical models have been applied to the electrophoretic mobility data in order to obtain different interfacial properties of the complexes (i.e., zeta potential and density charge of the surface charged layer).     

Electrostatic interactions of colloidal particles at vanishing ionic strength

Electrostatic interactions of colloidal particles are typically screened by mobile ions in the solvent. We measure the forces between isolated pairs of colloidal polymer microspheres as the density of bulk ions vanishes. The ionic strength is controlled by varying the concentration of surfactant (NaAOT) in a nonpolar solvent (hexadecane). While interactions are well-described by the familiar screened-Coulomb form at high surfactant concentrations, they are experimentally indistinguishable from bare Coulomb interactions at low surfactant concentration. Interactions are strongest just above the critical micelle concentration, where particles can obtain high surface potentials without significant screening, kappaa < 1. Exploiting the absence of significant charge renormalization, we are able to construct a simple thermodynamic model capturing the role of reverse micelles in charging the particle surface. These measurements provide novel access to electrostatic forces in the limit where the particle size is much less than the screening length, which is relevant not just to the nonpolar suspensions described here, but also to aqueous suspensions of nanoparticles.     

Well-Characterized Monodisperse Latexes as Model Colloids

Monodisperse polystyrene latexes prepared with persulfate-ion initiator can be ion exchanged to remove the adsorbed emulsifier and solute electrolyte. Rigorous purification of the ion-exchange'resins is necessary to avoid contamination with leached polyelectrolytes. These ion-exchanged latexes are stabilized with the residual sulfate end-groups of the polymer molecules, the number of which is determined by conductoroetric titration. The result is a dispersion of monodisperse spheres with-a constant and known surface charge due to chemically-bound strong-acid groups. These latexes are ideal models for colloidal studies. Preliminary experiments of stability, adsorption, sedimentation, viscosity, interference colors, and conductance give consistent results, e.g., the particle double-layer interactions determined by viscosity are in accord -with the particle spacings estimated from interference colors, the double-layer parameters estimated from conductometric titration and conductance measurements account for the measured decrease in sedimentation rate due to double-layer interactions, and the molecular area of sodium dodecyl sulfate measured by adsorption in latex is in agreement with literature values.     

On the Applicability of DLVO Theory to the Prediction of Clay Colloids Stability

The stability behavior of Na-montmorillonite colloids has been studied by combining the analysis of their surface charge properties and time-resolved dynamic light scattering experiments. The chemical surface model for several types of clays, including montmorillonite, has to take into account the double surface charge contribution due to their permanent structural charge and to their pH-dependent charge, which is developed at the edge sites, therefore, these stability studies were carried out as a function of both ionic strength and pH. DLVO theory is largely applied for the prediction of the stability of many colloidal systems, including the natural ones. This work shows that the stability behavior of Na-montmorillonite colloids cannot be satisfactorily reproduced by DLVO theory, using the surface parameters experimentally obtained. Particularly, this theory is unable to explain their pH-dependent stability behavior caused by the small charge at the edge sites. Based on these results, a literature review of DLVO stability prediction of clay colloids was performed. It confirmed that this theory is not capable of taking into account the double contribution to the total surface charge and, at the same time, pointed out the main uncertainties related to the appropriate use of the input parameters for the calculation as, for example, the Hamaker constant or the surface potential. Copyright 2000 Academic Press.     

Foaming and foam stability for mixed polymer-surfactant solutions: effects of surfactant type and polymer charge

Solutions of surfactant-polymer mixtures often exhibit different foaming properties, compared to the solutions of the individual components, due to the strong tendency for formation of polymer-surfactant complexes in the bulk and on the surface of the mixed solutions. A generally shared view in the literature is that electrostatic interactions govern the formation of these complexes, for example between anionic surfactants and cationic polymers. In this study we combine foam tests with model experiments to evaluate and explain the effect of several polymer-surfactant mixtures on the foaminess and foam stability of the respective solutions. Anionic, cationic, and nonionic surfactants (SDS, C(12)TAB, and C(12)EO(23)) were studied to clarify the role of surfactant charge. Highly hydrophilic cationic and nonionic polymers (polyvinylamine and polyvinylformamide, respectivey) were chosen to eliminate the (more trivial) effect of direct hydrophobic interactions between the surfactant tails and the hydrophobic regions on the polymer chains. Our experiments showed clearly that the presence of opposite charges is not a necessary condition for boosting the foaminess and foam stability in the surfactant-polymer mixtures studied. Clear foam boosting (synergistic) effects were observed in the mixtures of cationic surfactant and cationic polymer, cationic surfactant and nonionic polymer, and anionic surfactant and nonionic polymer. The mixtures of anionic surfactant and cationic polymer showed improved foam stability, however, the foaminess was strongly reduced, as compared to the surfactant solutions without polymer. No significant synergistic or antagonistic effects were observed for the mixture of nonionic surfactant (with low critical micelle concentration) and nonionic polymer. The results from the model experiments allowed us to explain the observed trends by the different adsorption dynamics and complex formation pattern in the systems studied.     

Experimental study of electrostatically stabilized colloidal particles: colloidal stability and charge reversal

We consider the interaction of colloidal spheres in the presence of mono-, di-, and trivalent ions. The colloids are stabilized by electrostatic repulsion due to surface charges. The repulsive part of the interaction potential Ψ(d) is deduced from precise measurements of the rate of slow coagulation. These "microsurface potential measurements" allow us to determine a weak repulsion in which Ψ(d) is of the order of a few k(B)T. These data are compared to ζ potential measured under similar conditions. At higher concentrations both di- and trivalent counterions accumulate at the very proximity of the particle surface leading to charge reversal. The salt concentration c(cr) at which charge reversal occurs is found to be always above the critical coagulation concentration c(ccc). The analysis of Ψ(d) and of the ζ potential demonstrates, however, that adsorption of multivalent counterions starts far below c(cr). Hence, colloid stability in the presence of di- and trivalent ions cannot be described in terms of a DLVO ansatz assuming a surface charge that is constant with regard to the ionic strength.     

Adsorption and heterocoagulation of nonionic surfactants and latex particles on cement hydrates

The adsorption of nonionic surfactants of the alkyl-phenol-poly(ethylene oxide) family and of acrylic latex particles on several anhydrous (but hydrating) or fully hydrated mineral phases of Portland cement was studied. No or negligible adsorption of the surfactant was observed. This was assigned to the ionized character of the surface silanol groups in calcium-silicate-hydrates and to the strongly ionic character of the OH groups in calcium hydroxide and in the calcium-sulfoaluminate-hydrates, which prevents the formation of surface-ethoxy hydrogen bonds. In contrast, provided they are properly stabilized by the surfactant, the latex particles form a loose monolayer on the surface of hydrating tricalcium silicate particles. The attractive interaction between the positive mineral surface and the negative latex surface appears to be the driving force for adsorption. In line with this, adsorption is reduced by sulfate anions, which adsorb specifically onto the silicate surface. Compared to tricalcium silicate, portlandite and gypsum interact only marginally with the latex particles. Our results show that the stability of the nonionic surfactant/latex/cement systems is essentially controlled by the latex colloidal stability and the latex-cement interactions, the surfactant having little direct interaction, if any, with the mineral surfaces.     

The adsorption of alkylpyridinium chlorides and their effect on the interfacial behavior of quartz

This research was directed at understanding cationic surfactant adsorption phenomena on wet-ground natural quartz, mainly with dodecylpyridinium chloride as the model surfactant. How these surfactant ions adsorb at the interface was delineated through measurements of adsorption isotherms, zeta potentials, suspension stability, contact angles, induction times, and flotation response. Hydrocarbon chain association of adsorbed surfactant ions (or self-association) leads to four distinct adsorption regions as the concentration of surfactant is increased in solution. The same four regions manifest themselves in the behavior of all of the interfacial processes studied. At low concentrations, adsorption is controlled primarily by electrostatic interactions, but when the adsorbed surfactant ions begin to associate into hemimicelles at the surface, hydrophobic chain interactions control the adsorption process. The results of experiments with alkylpyridinium chlorides of 12, 14 and 16 carbon atoms can be normalized in terms of their CMCs, which clearly show that surface aggregation phenomena are driven by the same hydrophobic interactions that lead to micelle formation in bulk solution.     

Influence of poly(ethylene oxide) brushes on the rheological properties of MgO colloidal suspensions in water

A combined experimental and multiscale simulation study of the influence of polymer brush modification on interactions of colloidal particles and rheological properties of dense colloidal suspensions has been conducted. Our colloidal suspension is comprised of polydisperse MgO colloidal particles modified with poly(ethylene oxide) (PEO) brushes in water. The shear stress as a function of shear rate was determined experimentally and from multiscale simulations for a suspension of 0.48 volume fraction colloids at room temperature for both bare and PEO-modified MgO colloids. Bare MgO particles exhibited strong shear thinning behavior and a yield stress on the order of several Pascals in both experiments and simulations. In contrast, simulations of PEO-modified colloids revealed no significant yielding or shear thinning and viscosity only a few times larger than solvent viscosity. This behavior is inconsistent with results obtained from experiments where modification of colloids with PEO brushes formed by adsorption of PEO-based comb-branched chains resulted in relatively little change in suspension rheology compared to bare colloids over the range of concentration of comb-branch additives investigated. We attribute this discrepancy in rheological properties between simulation and experiment for PEO-modified colloidal suspensions to heterogeneous adsorption of the comb-branch polymers.     

The dispersion-stability diagram of boehmite nanoparticles in aqueous AOT solutions

The dispersion stability of hydrophilic boehmite nanoparticles in aqueous sodium bis(2-ethylhexyl) sulfosuccinate (AOT) solutions was studied in a wide range of particle and surfactant concentrations. The two experimental parameters significantly influence the dispersion stability and span a stability diagram. With increasing surfactant concentration and decreasing particle concentration, the system changes from stable via moderately stable to unstable and back. In concentrated AOT solutions, fully redispersed particles are present, stabilized by a surfactant bilayer or admicelles on the surface. The redispersion can be reversibly induced by dilution or concentration of the samples. The positions of two transitions, namely for complete precipitation and for beginning redispersion, can be fitted accurately using a simple model based on H-type adsorption and including the specific surface area of the particle and the molar area of the surfactant. The transitions are controlled by the concentration of free surfactant molecules in solution as well as the saturation surface coverage and were corroborated by turbidity measurements.     

Effect of the ionic surfactant concentration on the stabilization/destabilization of polystyrene colloidal particles

One of the most interesting properties of the surfactants is that they are able to alter the stability of colloidal dispersions. Despite its great industrial relevance, only a few works analyze the colloidal stability of these systems at high surfactant concentrations (well above the critical micelle concentration (CMC)). In the present work, the colloidal stability of polystyrene particles is studied under a wide range of ionic surfactant concentrations. The effects of the surface charge of the latex particles (evaluating both sign and value), and surfactant type (cationic or anionic) have been examined. Colloidal stability data have been gathered by monitoring aggregation using a nephelometric technique. As will be shown, it is possible to reach different stability regimes using the same colloidal system just by changing the surfactant concentration. Independently of the sign of both the surfactant and the surface, the destabilization of the system consistently takes place above certain surfactant concentration due to a depletion effect from non-adsorbed micelles. This destabilization can be predicted by adding to the DLVO interaction energy a new contribution addressing the force between two spherical particles in the presence of non-adsorbing spherical macromolecules.     

Viscosity and yield stress reduction in non-colloidal concentrated suspensions by surface modification with polymers and surfactants and/or nanoparticle addition

A custom-designed apparatus termed the yield stress adaptor (YSA) has been used to evaluate the effect of polymer-surfactant coatings, and the addition of nanoparticles of different size, shape and surface chemistry, on the rheological properties of large hydrophilic particulates, sand, with the aim of reducing interparticle friction forces. Experimental results show that the flow properties of sand slurries at high volume fractions of sand (>50%) can be significantly enhanced by adding nanoparticles, and by surface modification with polymer/surfactant mixtures. A lesser effect is observed for polymer-only and surfactant-only coated samples. X-ray photoelectron spectroscopy was used to determine the concentration of organic species at the surface. The effect of polymer/surfactant concentration, adsorption time, polymer molecular weight, as well as surfactant charge and chemical structure were also addressed.     

Polymerization of styrene in the presence of monoesters of aromatic dicarboxylic acids as surfactants

The colloidal properties of monoesters of aromatic dicarboxylic acids and the heterophase polymerization of styrene in their presence have been studied. It has been shown that particles are formed from micro-droplets of the monomer. A high stability of polymer suspensions during the synthesis has been found to be provided by a strong interfacial adsorption layer formed on the surface of particles from the polymer being synthesized and a surfactant.     

Temperature effect on the stability of bentonite colloids in water

The stability of natural bentonite suspensions has been investigated as a function of temperature at pH 9 and ionic strength 10(-3) M. The sedimentation rate of the particles is directly related to their stability. The sedimentation kinetics was determined by examining the variation of particle concentration in solution with time. The observed kinetics for sedimentation is discussed quantitatively in terms of the potential energy between particles. The zeta-potential of the particles was measured and the DLVO theory was used to calculate attractive and repulsive potentials. Experimental observations are consistent with DLVO model predictions and show that the stability of bentonite colloids increases with temperature. Differences with other colloidal systems can be attributed to the temperature dependence of the surface charge of bentonite particles.