Transient interfacial tension and morphology evolution in partially miscible polymer blends

The influence of molecular weight asymmetry across an interface on the transient behavior of the interfacial tension is investigated for two different polymer combinations, polybutadiene (PBD)/polydimethylsiloxane (PDMS) and polybutene (PB)/PDMS. This choice ensures a minor diffuse interface using the first combination and a very diffuse interface in the latter case. Measurements of the interfacial tension as a function of time are carried out using a pendent/sessile drop apparatus at different temperatures ranging from 0 degrees C to 80 degrees C. Variations in the transient interfacial tension are attributed to diffusion of the lower molecular weight components from one phase into the other and the most pronounced changes are measured for the most diffusive systems (low molecular weight and high polydispersity) when diffusion goes from the drop into the matrix. By reversing the phases, only minor changes in the transient interfacial tension are measured. This is due to a fast saturation of the drop-phase since the drop volume is much smaller than that of the continuous phase. In all cases investigated, after a sufficient time a steady value of the interfacial tension is reached. In order to estimate the characteristic diffusion times of the migrating species, a discrete solution of the diffusion equation and a kinetic model from literature are applied. Results obtained are in line with the experimental observations. The importance of a changing interfacial tension on morphology development is studied on dilute (1%) blends, using two in situ techniques: small angle light scattering (SALS) and optical microscopy (OM). The SALS patterns yield the time evolution of the drop size, which is subsequently compared with the morphology following from OM. Depending on the diffusivity of the system, the morphology development is dominated by either diffusion or coalescence. Existing sharp-interface drainage models indeed do not apply for the diffuse blends and an improved quantitative estimation of the value of the critical film thickness is needed.     

Interfacial dynamics and rheology of polymer-grafted nanoparticles at air-water and xylene-water interfaces

Particle-stabilized emulsions and foams offer a number of advantages over traditional surfactant-stabilized systems, most notably a greater stability against coalescence and coarsening. Nanoparticles are often less effective than micrometer-scale colloidal particles as stabilizers, but nanoparticles grafted with polymers can be particularly effective emulsifiers, stabilizing emulsions for long times at very low concentrations. In this work, we characterize the long-time and dynamic interfacial tension reduction by polymer-grafted nanoparticles adsorbing from suspension and the corresponding dilatational moduli for both xylene-water and air-water interfaces. The dilatational moduli at both types of interfaces are measured by a forced sinusoidal oscillation of the interface. Surface tension measurements at the air-water interface are interpreted with the aid of independent ellipsometry measurements of surface excess concentrations. The results suggest that the ability of polymer-grafted nanoparticles to produce significant surface and interfacial tension reductions and dilatational moduli at very low surface coverage is a key factor underlying their ability to stabilize Pickering emulsions at extremely low concentrations.     

X型与线型嵌段聚醚在空气/水和正庚烷/水界面上聚集行为的比较研究

通过阴离子聚合方法合成了环氧乙烷(EO)含量和分子量均相同的线型聚氧丙烯(PEO)-聚氧乙烯(PPO) (LPE)和X型聚氧丙烯-聚氧乙烯(TPE)嵌段聚醚,考察了它们在空气/水及正庚烷/水界面上聚集行为的差异. 界面活性的研究结果表明,TPE降低水、正庚烷界面张力的效率和效能均低于LPE的. 聚醚分子在正庚烷/水界面达到吸附平衡的时间比在空气/水表面短. 由于正庚烷分子插入到聚醚吸附层中,聚醚分子可以在正庚烷/水界面上采取更为直立的状态,因此聚醚分子在正庚烷/水界面扩散较快. 聚醚在正庚烷/水界面的扩张弹性高于空气/水表面的.     

Transient interfacial tension of partially miscible polymers

The interfacial tension of three different binary polymer blends has been measured as function of time by means of a pendent drop apparatus, at temperatures ranging from 24 degrees C to 80 degrees C. Three grades of polybutene (PB), differing in average molecular weight and polydispersity, are used as dispersed phase, the continuous phase is kept polydimethylsiloxane (PDMS), ensuring different asymmetry in molecular weight across the interface. The interfacial tension changes with time and, therefore, this polymer blends can not be considered fully immiscible. Changes in interfacial tension are attributed to the migration of low-molecular weight components from the source phase into the interphase and, from there, into the receiving phase. In the early stages of the experiments, just after the contact between the two phases has been established, the formation of an interphase occurs and the interfacial tension decreases with time. As time proceeds, the migration process slows down given the decrease in driving force which is the concentration gradient and, at the same time, molecules accumulated in the interphase start to migrate into the "infinite" matrix phase. A quasi-stationary state is found before depletion of the low-molecular weight fraction in the drop occurs and causes the interfacial tension sigma(t) to increase. The time required to reach the final stationary value, sigma(stat), increases with molecular weight and is a function of temperature. Higher polydispersity leads to lower sigma(stat) and a weaker dependence of sigma(stat) on temperature is found. A model coupling the diffusion equation in the different regimes is applied in order to interpret the experimental results. Numerical solutions of the diffusion equation are proposed in the cases of a constant and a changing interphase thickness. In the latter case, the interphase is defined by tracking with time a fixed limiting concentration in the transient concentration profiles and the variations found in sigma(t) are attributed to the changes in the interphase thickness. A discrete version of this continuous model is proposed and scaling arguments are reported in order to compare the results obtained with the predictions of the continuous model. The kinetic model as proposed by Shi et al. [T. Shi, V.E. Ziegler, I.C. Welge, L. An, B.A. Wolf, Macromolecules 37 (2007) 1591-1599] appears as a special case of the discrete model, when depletion is not taken into account. Using the models, time scales for the diffusion process can be derived, which fit the experimental results quite well.     

Film drainage and interfacial instabilities in polymeric systems with diffuse interfaces

We report an experimental investigation on the effect of mutual diffusion in polymeric systems on film drainage between two captive drops. The main objective is to study the influence of diffuse interfaces on film drainage. This is done by using material combinations with different interfacial properties and interferometric visualization of the film between two interacting drops. For highly diffusive systems film drainage is observed to be, in contrast to immiscible systems, non-axisymmetric and unstable immediately after the film formation (at a few micrometers film thickness). Depending on whether the total thickness of the diffusion layers in the film is smaller or larger than the thickness of the film, Marangoni convection is found to enhance or delay film drainage. Enhanced film drainage is determined to be in order of 100 times faster than predicted by the current models, while delayed film drainage is observed after a drainage period where experimental and predicted results (assuming, a partially mobile interface) are in close agreement.     

Interfacial rheology and conformations of triblock copolymers adsorbed onto the water-oil interface

The conformation and the dilatational properties of three non-ionic triblock PEO-PPO-PEO (where PEO is polyethyleneoxide and PPO is polypropyleneoxide) copolymers of different hydrophobicity and molecular weight were investigated at the water-hexane interface. The interfacial behavior of the copolymers was studied by combining dilatational rheology using the oscillating drop method and ellipsometry. From the dilatational rheology measurements the limiting elasticity values, E(0), of the Pluronics as function of surface pressure, Π, and adsorption time were obtained, i.e. E(0)(t) and E(0)(Π). Here, it is shown that E(0)(t) depends on the number of PEO units and on the bulk concentration, showing maximum and minimum surface elasticity values which indicate conformational changes in the interfacial layer. Furthermore, in the framework of the polymer scaling law theory, conformational transitions were discussed in E(0) vs. Π plots. In a dilute regime (Π<14 mN m(-1)) at the water-hexane interface, E(0)=2Π fits well all the data, which indicates a two-dimensional "stretched chain" conformation. Increasing Π, two other interfacial transitions could take place. The different behavior of Pluronic copolymers could be also described by the local minima of E(0), which depends on the hydrophobicity of the copolymers. Conformational transitions observed by interfacial rheology were compared to ellipsometric data. Experimental results were discussed and explained on the basis of two- and three-dimensional copolymer structure taking into account that PPO chains could be partially immersed in hexane and water.     

Interfacial dilatational elasticity and viscosity of beta-lactoglobulin at air-water interface using pulsating bubble tensiometry

The ability of proteins to provide stability in foams is greatly influenced by their interfacial dilatational rheological properties. Surface tension response of a pulsatingbubble with an adsorbed layer of beta-lactoglobulin was measured for different frequencies and protein concentrations using a pulsating bubble tensiometer. A methodology, accounting for adsorption/desorption as well as variation of surface concentration due to expansion/contraction, was developed for the evaluation of surface dilatational elasticity and viscosity at different frequencies from these measurements. The adsorption rate constants were inferred from the surface pressure dynamics of protein adsorption using a Langmuir minitrough. The desorption rates were shown to be negligible for beta-lactoglobulin from the surface pressure response of a spread monolayer when subjected to compression in a Langmuir minitrough. The proposed model was employed to infer the interfacial dilatational viscosity and elasticity of an adsorbed beta-lactoglobulin layer at the air-water interface from experimental pulsating bubble data for protein concentrations in the range of 0.01-0.5 wt % at pH 7. As expected, the interfacial dilatational rheological properties were found to be higher at higher protein concentrations, this effect being less pronounced for dilatational elasticity. Heating at 80 degrees C for 30 min was found to result in higher interfacial dilatational viscosity and lower interfacial dilatational elasticity though this difference was within experimental error. The traditional approach for the inference of interfacial dilatational rheological properties is found to overpredict the interfacial dilatational elasticity whereas the viscosity values do not differ significantly from those obtained using the current analysis.     

Shear and dilatational relaxation mechanisms of globular and flexible proteins at the hexadecane/water interface

Proteins adsorbed at fluid/fluid interfaces influence many phenomena: food emulsion and foam stability (Murray et al. Langmuir 2002, 18, 9476 and Borbas et al. Colloids Surf., A 2003, 213, 93), two-phase enzyme catalysis (Cascao-Pereira et al. Biotechnol. Bioeng. 2003, 83, 498; 2002, 78, 595), human lung function (Lunkenheimer et al. Colloids Surf., A 1996, 114, 199; Wustneck et al.; and Banerjee et al. 2000, 15, 14), and cell membrane mechanical properties (Mohandas et al. 1994, 23, 787). Time scales important to these phenomena are broad, necessitating an understanding of the dynamics of biological macromolecules at interfaces. We utilize interfacial shear and dilatational deformations to study the rheology of a globular protein, lysozyme, and a disordered protein, beta-casein, at the hexadecane/water interface. Linear viscoelastic properties are measured using small amplitude oscillatory flow, stress relaxation after a sudden dilatational displacement, and shear creep response to probe the rheological response over broad experimental time scales. Our studies of lysozyme and beta-casein reveal that the interfacial dissipation mechanisms are strongly coupled to changes in the protein structure upon and after adsorption. For beta-casein, the interfacial response is fluidlike in shear deformation and is dominated by interfacial viscous dissipation, particularly at low frequencies. Conversely, the dilatational response of beta-casein is dominated by diffusion dissipation at low frequencies and viscous dissipation at higher frequencies (i.e., when the experimental time scale is faster than the characteristic time for diffusion). For lysozyme in shear deformation, the adsorbed protein layer is primarily elastic with only a weak frequency dependence. Similarly, the interfacial dilatational moduli change very little with frequency. In comparison to beta-casein, the frequency response of lysozyme does not change substantially after washing the protein from the bulk solution. Apparently, it is the irreversibly adsorbed fraction that dominates the dynamic rheological response for lysozyme. Using stress relaxation after a sudden dilatational displacement and shear creep response, the characteristic time of relaxation was found to be 1000 s in both modes of deformation. The very long relaxation time for lysozyme likely results from the formation of a glassy interfacial network. This network develops at high interfacial concentrations where the molecules are highly constrained because of conformation changes that prevent desorption.     

Interfacial dilational behaviour of adsorbed β-lactoglobulin layers at the different fluid interfaces

β-Lactoglobulin adsorption layers at the interfaces solution/air, /tetradecan and /sunflower oil were characterised by dynamic interfacial tension measurements and harmonic drop oscillation experiments in a time scale of some seconds. Axialsymmetric drop shape analysis (ADSA) was used to calculate drop volume, area and interfacial tension. Within a definite range of drop volume amplitude, the oscillation of the surface tension is harmonic and interfacial dilation parameters can be determined. Dependence of the dilational parameters on the amplitude and frequency of drop volume oscillation were determined and methodical demands are given for this special kind of ADSA application. The concentration of interfacial saturation is minimal at the interface with sunflower oil. Interfacial dilational elasticities, and viscosities are maximal at the saturation concentration of all systems investigated. The dilational viscosities are maximal in the frequency range 0.007–0.011 Hz and characterise molecular rearrangement processes in the adsorption layer. Interfacial dilational elasticity and viscosity are the largest at the interface with air. They are the smallest at the interface with sunflower oil. Similarities and differences of the systems investigated are discussed by taking into account the adsorption behaviour and the solvatation of different apolar and polar parts of the protein molecules in the neighbouring phase.     

A Growing Drop Technique for Measuring Dynamic Interfacial Tension

A novel, growing drop technique is described for measuring dynamic interfacial tension due to sorption of surface-active solutes. The proposed method relates the instantaneous pressure and size of expanding liquid drops to the interfacial tension and is useful for measuring both liquid/gas and liquid/liquid tensions over a wide range of time scales, currently from 10 ms to several hours. Growing drop measurements on surfactant-free water/ air and water/octanol interfaces yield constant tensions equal to their known literature values. For surfactant-laden, liquid drops, the growing drop technique captures the actual transient tension evolution of a single interface, rather than interval times as with the classic maximum-drop-pressure and drop-volume tension measurements. Dynamic tensions measured for 0.25 mM aqueous 1-decanol solution/air and 0.02 kg/m³ aqueous Triton X-100 solution/dodecane interfaces show nonmonotonic behavior, indicating slow surfactant transport relative to the imposed rates of interfacial dilatation. The dynamic tension of a purified and fresh 6 mM aqueous sodium dodecyl sulfate (SDS) solution/air interface shows only a monotonic decrease, indicating rapid surfactant transport relative to the imposed rates of dilatation. Conversely, an aged SDS solution, naturally containing trace dodecanol impurities, exhibits dynamic tensions which reflect a superposition of the rapidly equilibrating SDS and the slowly adsorbing dodecanol.     

Cross linking and rheological characterization of adsorbed protein layers at the oil-water interface

The dilatational rheological properties of cross-linked protein layers adsorbed at the oil-water interface were investigated with help of a modified drop tensiometer allowing successive replacements of the external phase. This setup enables one to perform cross-linking reactions at the interface only, that is, without any contact between the cross-linking agent and protein molecules in solution, under continuous monitoring of the interfacial tension. The mechanical properties of the resulting interface were investigated with dilatational large strain experiments. Measured rheological properties were related to the expected stability of an emulsion against disproportionation by considering the ratio of the interfacial elasticity to the interfacial tension. In an attempt to increase this ratio to improve the resistance against disproportionation, experiments were performed with densified protein layers obtained via reduction of the droplet area prior to cross linking. To highlight the influence of the protein morphology on the dilatational rheological properties of the cross-linked adsorbed layers, experiments were performed with random coil (beta-casein) as well as globular (beta-lactoglobulin) proteins. Glutaraldehyde was used as a cross-linking agent. Experiments were performed at 55 degrees C and pH 7.0 in 20 mM imidazole buffer for later comparison with enzymatically cross-linked adsorbed protein layers. The present work demonstrated substantial qualitative and quantitative differences in the interfacial rheological properties of cross-linked random coil and globular proteins.     

INTERACTION OP POLYVINYL ALCOHOL WITH LECITHIN AT THE AIR/WATER AND OIL/WATER INTERFACES AND ITS EFFECT ON EMULSION STABILITY

The interaction of polyvinyl alcohol (PVA) with lecithin films at the air/water and xylene/water interfaces was studied at pH 3, the isoelectric point of lecithin. Surface and interfacial tension measurements and electro-phoretie mobility data showed that PVA either replaces the lecithin molecules or becomes coadsorbed with it at the interface. This mixed film has no elasticity and very low interfacial viscosity. However, coalescence rate measurements showed that the emulsion formed by the polymer* lecithin is more stable than that formed with either polymer or lecithin alone. The enhanced stability by the PVA-lecithin mixed film was attributed to steric interaction produced by the adsorbed polymer.     

ASP复合驱油体系瞬时界面张力的研究

以胜利油田孤岛试验区原油为油相,用正交试验筛选了碱/天然混合羧酸盐/聚合物驱油体系,讨论了各组分对ASP复合驱油体系油水瞬时界面张力的影响,并探讨了各组分间的相互作用机理及其在油水界面的吸附机理。     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Interfacial characterization of beta-lactoglobulin networks: displacement by bile salts

The competitive displacement of a model protein (beta-lactoglobulin) by bile salts from air-water and oil-water interfaces is investigated in vitro under model duodenal digestion conditions. The aim is to understand this process so that interfaces can be designed to control lipid digestion thus improving the nutritional impact of foods. Duodenal digestion has been simulated using a simplified biological system and the protein displacement process monitored by interfacial measurements and atomic force microscopy (AFM). First, the properties of beta-lactoglobulin adsorbed layers at the air-water and the olive oil-water interfaces were analyzed by interfacial tension techniques under physiological conditions (pH 7, 0.15 M NaCl, 10 mM CaCl2, 37 degrees C). The protein film had a lower dilatational modulus (hence formed a weaker network) at the olive oil-water interface compared to the air-water interface. Addition of bile salt (BS) severely decreased the dilatational modulus of the adsorbed beta-lactoglobulin film at both the air-water and olive oil-water interfaces. The data suggest that the bile salts penetrate into, weaken, and break up the interfacial beta-lactoglobulin networks. AFM images of the displacement of spread beta-lactoglobulin at the air-water and the olive oil-water interfaces suggest that displacement occurs via an orogenic mechanism and that the bile salts can almost completely displace the intact protein network under duodenal conditions. Although the bile salts are ionic, the ionic strength is sufficiently high to screen the charge allowing surfactant domain nucleation and growth to occur resulting in displacement. The morphology of the protein networks during displacement is different from those found when conventional surfactants were used, suggesting that the molecular structure of the surfactant is important for the displacement process. The studies also suggest that the nature of the oil phase is important in controlling protein unfolding and interaction at the interface. This in turn affects the strength of the protein network and the ability to resist displacement by surfactants.     

Demonstrating the feasibility of monitoring the molecular-level structures of moving polymer/silane interfaces during silane diffusion using SFG

In this paper, the feasibility of monitoring molecular structures at a moving polymer/liquid interface by sum frequency generation (SFG) vibrational spectroscopy has been demonstrated. N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane (AATM, NH2(CH2)2NH(CH2)3Si(OCH3)3) has been brought into contact with a deuterated poly(methyl methacrylate) (d-PMMA) film, and the interfacial silane structure has been monitored using SFG. Upon initial contact, the SFG spectra can be detected, but as time progresses, the spectral intensity changes and finally disappears. Additional experiments indicate that these silane molecules can diffuse into the polymer film and the detected SFG signals are actually from the moving polymer/silane interface. Our results show that the molecular order of the polymer/silane interface exists during the entire diffusion process and is lost when the silane molecules traverse through the thickness of the d-PMMA film. The loss of the SFG signal is due to the formation of a new disordered substrate/silane interface, which contributes no detectable SFG signal. The kinetics of the diffusion of the silane into the polymer have been deduced from the time-dependent SFG signals detected from the AATM molecules as they diffuse through polymer films of different thickness.     

Effect of Molecular Weight on the Interfacial Dilational Viscoelasticity of Anionic Polyelectrolyte/Surfactant Systems

In this article, the effect of molecular weight on the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water-octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. PSS/cationic surfactant CTAB systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be well explained by electrostatic interaction. Molecular weight of PSS plays a crucial role in the nature of adsorption film. The complex formed by CTAB and higher molecular weight PSS, which has larger dimension and stronger interaction, results in higher dilational modulus at lower surfactant bulk concentration. In the case of PSS/anionic surfactant SDS systems, the co-adsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational modulus at lower surfactant bulk concentration. For PSS/nonionic surfactant T × 100 systems, PSS may form a sublayer contiguous to the aqueous phase, which has little effect on interfacial tension but slightly decreases dilational modulus.     

Structure, dynamics, and the free energy of solute adsorption at liquid-vapor interfaces of simple dipolar systems: molecular dynamics results for pure and mixed Stockmayer fluids

We have performed molecular dynamics simulation studies of the structural, thermodynamic, and dynamical properties of liquid-vapor interfaces of pure and binary Stockmayer fluids of different polarity. The density profiles, the width of the liquid-vapor interface, and the orientational structure of the interfaces are calculated to characterize the structural aspects of the interfaces. Among the thermodynamic properties, we have computed the surface tension and also the free energy of transfer of a charged solute across the liquid-vapor interface for both pure and mixed fluids. Among the dynamical properties of the interfaces, we have calculated the time dependence of the velocity and angular velocity autocorrelation functions, continuous and intermittent survival probabilities, mean square displacements, diffusion coefficients, and also the dipole correlation functions and orientational relaxation times of interfacial solvent molecules. It is found that the width of the interfaces decreases with increase of concentration of the more polar component. The dipole vectors of the interfacial molecules tend to align parallel to the surfaces and this alignment is enhanced with increasing dipole moment of the fluid molecules. Also, the surface tension shows an increasing trend with increase of dipole moment of the molecules. The dynamical properties of the interfaces are found to be different from those of the corresponding bulk liquid phases. In general, the molecules at the interfaces are found to rotate and translate in the parallel direction at a somewhat faster rate than the bulk molecules. Also, on increase of concentration of the more polar component, the diffusion and orientational relaxation of interfacial molecules are found to show a weaker slowing down than those of the bulk molecules, which can be attributed to the preferential presence of the more polar component in the bulk liquid regions. The temporal behavior of the interfacial survival probabilities reveals a decrease of the survival times with increasing polarity, which can be attributed to a corresponding decrease in the interfacial thickness. Results are presented for both continuous and intermittent survival times and the origins of their differences are discussed. The free energy calculations reveal no minimum at the interfaces for adsorption of a charged solute, which shows that the ions would prefer to stay in the interior of the liquid phases, rather than at interfaces, for these model dipolar systems.     

Disruption of viscoelastic beta-lactoglobulin surface layers at the air-water interface by nonionic polymeric surfactants

Nonequilibrium interfacial layers formed by competitive adsorption of beta-lactoglobulin and the nonionic triblock copolymer PEO99-PPO65-PEO99 (F127) to the air-water interface were investigated in order to explain the influence of polymeric surfactants on protein film surface rheology and foam stability. Surface dilatational and shear rheological methods, surface tension measurements, dynamic thin-film measurements, diffusion measurements (from fluorescence recovery after photo bleaching), and determinations of foam stability were used as methods. The high surface viscoelasticity, both the shear and dilatational, of the protein films was significantly reduced by coadsorption of polymeric surfactant. The drainage rate of single thin films, in the presence of beta-lactoglobulin, increased with the amount of added F127, but equilibrium F127 films were found to be thicker than beta-lactoglobulin films, even at low concentration of the polymeric surfactant. It is concluded that the effect of the nonionic triblock copolymer on the interfacial rheology of beta-lactoglobulin layers is similar to that of low molecular weight surfactants. They differ however in that F127 increases the thickness of thin liquid films. In addition, the significant destabilizing effect of low molecular weight surfactants on protein foams is not found in the investigated system. This is explained as due to long-range steric forces starting to stabilize the foam films at low concentrations of F127.     

Chirality Discrimination at Binary Organic|Water Interfaces Monitored by Interfacial Tension Measurements with Preliminary Comparison with Molecular Dynamics Simulations

Chirality discrimination at a binary toluene (organic)/water(aqueous) interface between R- or S-Tol-BINAP (2,2′-Bis(di-p-tolylphosphino)-1,1′-binaphthyl) molecules and the water-soluble serine chiral specie is examined for the first time, using a combination of interfacial tension measurements and molecular dynamic simulations. Experimental interfacial measurements exhibit a clear chirality-controlled difference when a homochiral versus a heterochiral enantiomeric pairs are introduced at the interfaces. The related molecular dynamics simulations support the experimental results and provide further molecular insight of intermolecular interactions at the interfaces. The results indicate that interfacial tension measurements can capture the preferential interactions which exist between different pairs of enantiomers at the binary interfaces, opening up a new way for probing chirality discrimination at liquid-liquid interfaces.