Transient and steady state CO oxidation kinetics on nanolithographically prepared supported Pd model catalysts: experiments and simulations

Applying molecular-beam methods to a nanolithographically prepared planar PdSiO2 model catalyst, we have performed a detailed study of the kinetics of CO oxidation. The model catalyst was prepared by electron-beam lithography, allowing individual control of particle size and position. The sample was structurally characterized by atomic force microscopy and scanning electron microscopy before and after reaction. In the kinetic experiments, the O-rich and CO-rich regimes were investigated systematically with respect to their transient and steady-state behaviors, both under bistable and monostable reaction conditions. Separate molecular beams were used in order to supply the reactants, allowing individual control over the reactant fluxes. The desorbing CO2 was detected by both angle-resolved and angle-integrated mass spectrometries. The experimental results were analyzed using different types of microkinetic models, including a detailed reaction-diffusion model, which takes into account the structural parameters of the catalyst as well as scattering of the reactants from the support. The model quantitatively reproduces the results as a function of the reactant fluxes and the surface temperature. Various kinetic effects observed are discussed in detail on the basis of the model. Specifically, it is shown that under conditions of limited oxygen mobility, the switching behavior between the kinetic regimes is largely driven by the surface mobility of CO.     

常温常压下五元杂环的催化加氢反应

 考察了常温常压下吡咯、呋喃和噻吩的催化加氢反应;用紫外吸收光谱、气相色谱和酸碱度测定分析了反应物质;用比表面积测定、X射线衍射、透射电镜及高分辨电镜表征了催化剂．结果表明,在纳米量级的镍基催化剂作用下,双键五元杂环的加氢反应过程是多反应同时进行：主要有环上双键先加氢生成四氢化物单键环,继而开环加氢生成若干小分子气体;也有直接开环反应．总体上是在还原条件下实现降解反应．超声波的介入有利于保持催化剂的活性．对反应机理进行了探讨．     

二氧化碳和丙烯直接合成甲基丙烯酸NiPMo12催化剂的研究

用硝酸镍对磷钼酸(MPA)进行改性制得NiPMo12催化剂.采用ICP,XRD,Tg-DTA,EXAFS,IR,TPD-MS和微反技术研究了催化剂的化学组成、分子结构、化学吸附性质和催化反应性能.350℃下NiPMo12催化剂仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni—O—Mo的桥氧协同作用下可生成CO2桥式吸附态Ni(Ⅱ)←O—(CO)—(O-—Ni).丙烯在催化剂上存在多种吸附态.在氢转移和碳插入作用下得到了反应产物MAA.在290℃和1MPa的反应条件下,丙烯的摩尔转化率为2.6%,产物MAA选择性为96%.     

Experimental study of intermediates and wave phenomena in co oxidation on platinum metal (Pt,Pd) surfaces

The mechanism of catalytic CO oxidation on Pt(100) and Pd(110) single-crystal surfaces and on Pt and Pd sharp tip (～10³ Å) surfaces has been studied experimentally by temperature-programmed reaction, temperature desorption spectroscopy, field electron microscopy, and molecular beam techniques. Using the density functional theory the equilibrium states and stretching vibrations of oxygen atoms adsorbed on the Pt(100) surface have been calculated. The character of the mixed adsorption layer was established by high resolution electron energy loss spectroscopy—molecular adsorption (O_2ads, CO_ads) on Pt(100)-hex and dissociative adsorption (O_ads, CO_ads) on Pt(100)-(1×1). The origin of kinetic self-oscillations for the isothermal oxidation of CO in situ was studied in detail on the Pt and Pd tips by field electron microscopy. The initiating role of the reversible phase transition (hex) ? (1 × 1) of the Pt(100) nanoplane in the generation of regular chemical waves was established. The origination of self-oscillations and waves on the Pt(100) nanoplane was shown to be caused by the spontaneous periodical transition of the metal from the low-active state (hex) to the highly active catalytic state (1 × 1). A relationship between the reactivity of oxygen atoms (O_ads) and the concentration of CO_ads molecules was revealed for the Pd(110) surface. Studies using the isotope label ¹⁸O_ads demonstrated that the low-temperature formation of CO₂ at 150 K is a result of the reaction of CO with the highly reactive state of atomic oxygen (O_ads). The possibility of the low-temperature oxidation of CO via interaction with the so-called “hot” oxygen atoms (O_hot) appearing on the surface at the instant of dissociation of O_2ads molecules was studied by the molecular beam techniques.     

Restructuring and redispersion of silver on SiO2 under oxidizing/reducing atmospheres and its activity toward CO oxidation

The effects of oxygen-hydrogen pretreatments of nanosilver catalysts in cycle mode on the structure and particle size of silver particles, and subsequently the activity of the catalyst toward CO oxidation (or CO selective oxidation in the presence of H2), are reported in this paper. Ag/SiO2 catalyst with silver particle sizes of ca. 6 approximately 8 nm shows relatively high activity in the present reaction system. The adopting of a cycle of oxidation/reduction pretreatment has a marked influence on the activity of the catalyst. Oxygen pretreatment at 500 degrees C results in the formation of subsurface oxygen and activates the catalyst. As evidenced by in-situ XRD and TEM, the following H2 treatment at low temperatures (100 approximately 300 degrees C) causes surface faceting and redispersing of the silver particles without destroying the subsurface oxygen species. The subsequent in-situ FTIR and catalytic reaction results show that CO oxidation occurs at -75 degrees C and complete CO conversion can be obtained at 40 degrees C over such a nanosilver catalyst pretreated with oxygen at 500 degrees C followed by H2 at 100 degrees C. However, prolonged hydrogen treatment at high temperatures (>300 degrees C) after oxygen pretreatment at 500 degrees C induces the aggregation of silver particles and also depletes so much subsurface oxygen species that the pathway of CO oxidation by the subsurface oxygen species is inhibited. Meanwhile, the ability of the catalyst to adsorb reactants is greatly depressed, resulting in a 20 approximately 30% decrease in the activity toward CO oxidation. However, the activity of the catalyst pretreated with oxygen at 500 degrees C followed by hydrogen treatment at high temperatures (>300 degrees C) is still higher than that directly pretreated with H2. This kind of catalytic behavior of silver catalyst is associated with physical changes in the silver crystallites because of surface restructuring and crystallite redispersion during the course of oxygen-hydrogen pretreatment steps.     

Theoretical study of the reaction of carbon monoxide with oxygen molecules in the ground triplet and singlet delta states

Quantum chemical calculations were carried out to study the reaction of carbon monoxide with molecular oxygen in the ground triplet and singlet delta states. Transition states and intermediates that connect the reactants with products of the reaction on the triplet and singlet potential energy surfaces were identified on the base of coupled-cluster method. The values of energy barriers were refined by using compound techniques such as CBS-Q, CBS-QB3, and G3. The calculations showed that there exists an intersection of triplet and singlet potential energy surfaces. This fact leads to the appearance of two channels for the triplet CO+O(2)(X(3)Σ(g)(-)) reaction, which produces atomic oxygen in the ground O((3)P) and excited O((1)D) states. The appropriate rate constants of all reaction paths were estimated on the base of nonvariational transition-state theory. It was found that the singlet reaction rate constant is much greater than the triplet one and that the reaction channel CO+O(2)(a(1)Δ(g)) should be taken into consideration to interpret the experimental data on the oxidation of CO by molecular oxygen.     

Early stages of particle formation in precipitation reactions-quinacridone and boehmite as generic examples

For many products, such as nanoparticulate systems, particle formation by precipitation is an essential procedural step. To learn more about the processes involved in precipitation, we investigated particle formation during precipitation reactions by means of online and offline methods. As model systems we chose the catalyst boehmite and the organic pigment quinacridone. The reactants were mixed in a mixing device and led into a reaction tube. At the end of the tube, a free jet of the suspension was produced. By varying the length of the reaction tube the time between mixing the reactants and the moment of observation was varied. Thus a time resolution down to 10 ms from the beginning of the reaction was obtained. Small-angle X-ray scattering on the free jet yielded online information about the structural inhomogeneities within the reacting systems. Transmission electron microscopy patterns obtained from quenched samples, which were taken by shooting copper grids through the free jet into liquid nitrogen, provided complementary information about structural features. Immediately after mixture an emulsion-like structure develops indicating that classical nucleation theory does not apply in the present systems. This finding can be explained by assuming instantaneous reaction at the interfaces of the two reactants that meet in the mixing device. From this preliminary state primary particles form with a size in the nanometer range. The observations can be rationalized by considering the underlying hydrodynamics of turbulent mixing of the reactants.     

Cu／ZnO催化剂上逆向水煤气变换反应反应机理的Monte Carlo模拟

采用Ｍｏｎｔｅ Ｃａｒｌｏ方法模拟了ＣＯ２在Ｕ／ＺｎＯ催化剂上的解离反应，发现在ＣＯ２的解离过程中只有ＣＯ生成；若用Ｈ２对生成的表面吸附氧进行还原，所生成的Ｈ２Ｏ量与前期生成的ＣＯ量相同，说明在Ｃｕ／ＺｎＯ上ＣＯ２和Ｈ２之间发生了化学计量的氧化还原反应，即逆向水煤气反应可能以表面氧化还原反应机理进行。     

Surface State of a Silver Catalyst for Ethylene Glycol Oxidation

The surface state of electrolytic silver before and after treatment with a reaction mixture in the course of ethylene glycol oxidation to glyoxal was studied using X-ray photoelectron spectroscopy and scanning electron microscopy. It was found that electrophilic forms of adsorbed oxygen, which participate in the selective conversion of ethylene glycol, were formed on the surface of electrolytic silver crystals under exposure to oxygen under conditions similar to catalytic process conditions. The treatment of the catalyst with a reaction mixture resulted in the formation of filamentous carbon deposition products. A mechanism of formation of carbon-containing products was proposed.     

Model studies in heterogeneous catalysis at the microscopic level: from the structure and composition of surfaces to reaction kinetics

Heterogeneous catalysis is one of the fields of modern technology, in which a characterization of structural and chemical properties of solid surfaces at the microscopic level is of enormous importance. For a long time, such insights have been precluded by the complexity of most catalytically active materials. Recently, substantial progress has been made, however, toward a microscopic-level understanding of complex catalyst surfaces. We discuss the driving factors for these advancements, which are based on the development of new well-defined model systems as well as on advances in experimental technology and theory. Scrutinizing the example of planar model catalysts, we identify the process of linking structural and chemical information to microscopic reaction kinetics as a particular challenging aspect of today’s work. We review the kinetic effects which may have an influence on the reaction kinetics on complex surfaces. As an example how structural and kinetic information can be correlated at the microscopic level we discuss the case of surface oxidation and oxygen induced restructuring of Pd nanoparticles as studied by molecular beam methods.     

Kinetic evaluation of highly active supported gold catalysts prepared from monolayer-protected clusters: an experimental Michaelis-Menten approach for determining the oxygen binding constant during CO oxidation catalysis

Thiol monolayer-protected Au clusters (MPCs) were prepared using dendrimer templates, deposited onto a high-surface-area titania, and then the thiol stabilizers were removed under H2/N2. The resulting Au catalysts were characterized with transmission electron microscopy, X-ray photoelectron spectroscopy, and infrared spectroscopy of adsorbed CO. The Au catalysts prepared via this route displayed minimal particle agglomeration during the deposition and activation steps. Structural data obtained from the physical characterization of the Au catalysts were comparable to features exhibited from a traditionally prepared standard Au catalyst obtained from the World Gold Council (WGC). A differential kinetic study of CO oxidation catalysis by the MPC-prepared Au and the standard WGC catalyst showed that these two catalyst systems have essentially the same reaction order and Arrhenius apparent activation energies (28 kJ/mol). However, the MPC-prepared Au catalyst shows 50% greater activity for CO oxidation. Using a Michaelis-Menten approach, the oxygen binding constants for the two catalyst systems were determined and found to be essentially the same within experimental error. To our knowledge, this kinetic evaluation is the first experimental determination of oxygen binding by supported Au nanoparticle catalysts under working conditions. The values for the oxygen binding equilibrium constant obtained from the Michaelis-Menten treatment (ca. 29-39) are consistent with ultra-high-vacuum measurements on model catalyst systems and support density functional theory calculations for oxygen binding at corner or edge atoms on Au nanoparticles and clusters.     

负载型Sn2(OMe)2Cl2/SiO2催化剂的制备、表征与催化合成碳酸二甲酯

采用表面改性法制备了负载型Sn2(OMe)2Cl2/SiO2双核桥联配合物催化剂,用IR,TPD和微量反应技术研究了催化剂的表面结构、化学吸附性能和反应活性.结果表明,双核桥联配合物Sn2(OMe)2Cl2以O(Me)为桥,Cl为配体,并以Sn-O-Si形式键合到SiO2表面上;CO2与催化剂表面的金属离子Sn4+和桥基配体OMe的O2-形成桥式和甲氧碳酸酯基两种吸附态,CH3OH与催化剂表面的金属离子Sn4+仅形成一种分子吸附态;在413K以下,CO2和CH3OH在Sn2(OMe)2Cl2/SiO2催化剂表面上以近100%的选择性生成碳酸二甲酯;CO2在催化剂表面形成的甲氧碳酸酯基吸附态是生成DMC的关键物种,其与在同一活性中心的分子吸附态甲醇的反应决定了催化剂的活性和产物选择性.     

Effect of electron beam irradiation on the formation of active sites in the Pt/H pentasil catalyst

The influence of preirradiation with an electron beam from a linear resonance electron accelerator in flowing argon on the structure and properties of the 1% Pt/H pentasil catalyst was studied. The support structure was studied by x-ray diffraction and low-temperature nitrogen adsorption. No changes in the crystal structure and pentasil specific surface area were observed in the irradiation dose range from 120 to 900 Mrad at an average electron energy of 7.7 MeV. The electron beam treatment resulted in a considerable increase in the catalytic activity of the Pt/H pentasil in gas-phase toluene hydrogenation as a model reaction. The results obtained by IR spectroscopy of adsorbed CO and X-ray diffraction data suggested that the increase in the catalyst activity after electron beam irradiation is due to changes in the size and charge of the Pt particles.     

二氧化碳和丙烯直接合成甲基丙烯酸CuPW/TiO2催化剂的研究

用溶胶-凝胶法以磷钨酸(TPA)的铜盐溶液水解钛酸四丁酯制备了CuPW/TiO2催化剂。使用ICP、XRD、TG-DTA、IR、TPD-MS和微反技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能。实验结果表明杂多钨酸盐与TiO2表面通过O2-桥发生键合作用。在623 K下,杂多阴离子仍保持原有的Keggin结构。CO2在Lewis酸位Cu(Ⅱ)和Lewis碱位Cu—O—W的桥氧协同作用下形成卧式吸附态。丙烯以分子吸附态在催化剂上选择吸附。在563 K,1 MPa和空速1 500 h-1的反应条件下,丙烯的摩尔转化率为4.3%,产物MAA(甲基丙烯酸)的选择性为96%。     

Molecular dynamics simulations of surface oxide-water interactions on Pt(111) and Pt/PtCo/Pt3Co(111)

Classical molecular dynamics simulations of the interactions of water with oxidized Pt(111) and Pt/PtCo/Pt(3)Co(111) surfaces are performed by modeling water with the CF1 central force model that allows molecular dissociation and therefore the presence of other intermediates of the oxygen reduction reaction different from atomic oxygen. It is found that the water-surface oxide interactions do not affect the overall structure of the catalyst represented by an extended periodic slab. However, such interactions are affected by changes in the electrochemical potential which are simulated by higher values of the surface and atomic oxygen charges at increased oxygen coverage. Thus, electrochemical potential as well as the presence of protons and anions products of acid dissociation define the identity and the amount of oxygen reduction reaction intermediates such as OH or H(3)O. We observe agglomerations of water molecules over regions of the surface and the presence of OH and H(3)O in their vicinity. Our simulation model is able to qualitatively reproduce features of the degradation of the catalyst surface after oxidation and reduction cycles.     

钙钛矿型La1+X/2Sr1-x/2Co1-xCuxO3催化CO氧化活性与表征

The catalytic activity and the reactive properties of perovskite-type oxides catalysts La(1+x/2)Sr(1-x/2)Co1-xCuxO3 for CO oxidation reaction were investigated. Results showed that the catalytic activity for CO oxidation reached to a maximum when x＝0.4. The temperature for complete CO oxidation under atmospheric and experimental conditions was 168℃. According to the stoicheometry of catalyst, all catalysts were oxygen defect compounds. The active oxygen species on this catalyst was the adsorbed oxygen which was adsorbed on the surface lattice oxygen defect. It was also found that Co4+ existed in the catalysts and the sufrace active oxygen species was caused by the Co4+. It was concluded that CO oxidation reaction on this catalyst was carried out by the valence change between Co3+ and Co4+ which was adjusted by the adsorbed oxygen.     

氧化铝载体对Pt-Sn/Al2O3催化剂上苯胺和苯甲醇一步合成N-苯基苄胺催化反应性能的影响

以基于借氢策略的苯甲醇和苯胺一步合成N-苯基苄胺为模型反应,研究了三种不同表面结构的氧化铝对其负载的Pt-Sn催化剂上N-烷基化合成仲胺反应性能的影响.采用N₂吸附-脱附法、压汞法、X射线衍射、透射电镜、扫描电镜、CO脉冲吸附、H₂-程序升温还原及NH₃-程序升温脱附等技术对载体和Pt-Sn/Al₂O₃催化剂进行了表征.结果表明,与Al₂O₃相互作用较弱且高度分散的Pt颗粒具有很高的催化活性,Al₂O₃载体较大的孔体积和大孔分布的孔结构有助于反应物扩散和吸附到催化剂表面并提高反应活性.同时也有利于反应产物从催化剂表面离开,从而提高催化剂的稳定性.然而Al₂O₃较强的酸性及酸性分布降低了产物仲胺的选择性和催化剂稳定性.     

常压高频放电等离子体炬改进制备CO2/CH4重整用Ni/MgO催化剂

比较了常规法、等离子体炬法和等离子体炬辅助焙烧法制得的Ni/MgO催化剂上CO2/CH4重整反应性能差异,并利用X射线衍射、透射电镜、X射线光电子能谱和CO2程序升温表面反应等技术对反应前后催化剂进行了表征,结果表明,采用等离子体炬辅助焙烧法制备的催化剂上Ni晶粒粒径小,分散度较高,低温活性和抗积炭性能较高;在常压,7...     

Adsorption and reaction of methanol on clean and oxygen modified rhodium/vanadium surface alloys

The dehydrogenation of methanol on Rh(111), on a Rh(111)/V subsurface alloy and on Rh(111) with V islands has been studied with and without preadsorbed oxygen using a supersonic molecular beam and temperature programmed desorption. The reactivity is highest for the V islands surface without oxygen. But this surface is deactivated due to CO dissociation. The subsurface alloy is less reactive than the islands, but still more active than the Rh(111) surface. The reaction products are carbon monoxide and hydrogen only. With preadsorbed oxygen Rh(111) is the most active surface, but a strong dependence of the activity on the amount of preadsorbed oxygen is found for all three surfaces. The reaction products with preadsorbed oxygen are water, hydrogen, carbon dioxide and carbon monoxide. The reactions follow the same mechanism on all surfaces, but the activation energy of the individual reaction steps is different leading to significant changes in the thermal desorption spectra and in King and Wells-type experiments.     

Angular momentum conservation in photochemical fragmentation: A simple model

The role of conservation of angular momentum in a photofragmentation reaction involving a large change in molecular geometry between reactants and products is discussed in terms of a simple model.