Operator splitting algorithm for isokinetic SLLOD molecular dynamics

We apply an operator splitting method to develop a simulation algorithm that has complete analytical solutions for the Gaussian thermostated SLLOD equations of motion [D. J. Evans and G. P. Morriss, Phys. Rev. A 30, 1528 (1984)] for a system under shear. This leads to a homogeneous algorithm for performing both equilibrium and nonequilibrium isokinetic molecular dynamics simulation. The resulting algorithm is computationally efficient. In particular, larger integration time steps can be used compared to simulations with regular Gaussian thermostated SLLOD equations of motion. The utility and accuracy of the algorithm are demonstrated through application to the Weeks-Chandler-Anderson fluid. Although strict conservation of the kinetic energy suppresses thermal fluctuations in the system, this algorithm does not allow simulations at lower shear rates than those normally afforded by older nonequilibrium molecular dynamics simulations.     

An examination of the validity of nonequilibrium molecular-dynamics simulation algorithms for arbitrary steady-state flows

Nonlinear-response theory of nonequilibrium molecular-dynamics simulation algorithms is considered under the imposition of an arbitrary steady-state flow field. It is demonstrated that the SLLOD and DOLLS algorithms cannot be used for general flows, although the SLLOD algorithm is rigorous for planar Couette flow. Following the same procedure used to establish SLLOD as the valid algorithm for planar Couette flow [D. J. Evans and E. P. Morriss, Phys. Rev. A 30, 1528 (1984)], it is demonstrated that the p-SLLOD algorithm is valid for arbitrary flows and produces the correct nonlinear response of the viscous pressure tensor.     

Rheological and structural studies of liquid decane, hexadecane, and tetracosane under planar elongational flow using nonequilibrium molecular-dynamics simulations

We report for the first time rheological and structural properties of liquid decane, hexadecane, and tetracosane using nonequilibrium molecular-dynamics (NEMD) simulations under planar elongational flow (PEF). The underlying NEMD algorithm employed is the so-called p-SLLOD algorithm [C. Baig, B. J. Edwards, D. J. Keffer, and H. D. Cochran, J. Chem. Phys. 122, 114103 (2005)]. Two elongational viscosities are measured, and they are shown not to be equal to each other, indicating two independent viscometric functions in PEF. With an appropriate definition, it is observed that the two elongational viscosities converge to each other at very low elongation rates, i.e., in the Newtonian regime. For all three alkanes, tension-thinning behavior is observed. At high elongation rates, chains appear to be fully stretched. This is supported by the result of the mean-square end-to-end distance of chains (R(ete2)) and the mean-square radius of gyration of chains (R(g2)), and further supported by the result of the intramolecular Lennard-Jones (LJ) potential energy. It is also observed that (R(ete2)) and (R(g2)) show a different trend as a function of strain rate from those in shear flow: after reaching a plateau value, (R(ete2)) and (R(g2)) are found to increase further as elongation rate increases. A minimum in the hydrostatic pressure is observed for hexadecane and tetracosane at about epsilon(msigma2/epsilon)1/2=0.02. This phenomenon is shown to be associated with the intermolecular LJ potential energy. The bond-bending and torsional energies display similar trends, but a different behavior is observed for the bond-stretching energy. An important observation common in these three bonded-intramolecular interactions is that all three modes are suppressed to a small value at high elongation rates. We conjecture that a liquid-crystal-like, nematic structure is present in these systems at high elongation rates, which is characterized by a strong chain alignment with a fully stretched conformation.     

Molecular dynamics in the isothermal-isobaric ensemble: the requirement of a "shell" molecule. I. Theory and phase-space analysis

Current constant pressure molecular-dynamics (MD) algorithms are not consistent with the recent reformulation of the isothermal-isobaric (NpT) ensemble. The NpT ensemble partition function requires the use of a "shell" molecule to identify uniquely the volume of the system, thereby avoiding the redundant counting of configurations [e.g., G. J. M. Koper and H. Reiss, J. Phys. Chem. 100, 422 (1996); D. S. Corti, Phys. Rev. E, 64, 016128 (2001)]. So far, only the NpT Monte Carlo method has been updated to allow the system volume to be defined by a shell particle [D. S. Corti, Mol. Phys. 100, 1887 (2002)]. A shell particle has yet to be incorporated into MD simulations. The proper modification of the NpT MD algorithm is therefore the subject of this paper. Unlike Andersen's method [H. C. Andersen, J. Chem. Phys. 72, 2384 (1980)] where a piston of unknown mass serves to control the response time of volume fluctuations, the newly proposed equations of motion impose a constant external pressure via the introduction of a shell particle of known mass. Hence, the system itself sets the time scales for pressure and volume fluctuations. The new algorithm is subject to a number of fundamentally rigorous tests to ensure that the equations of motion sample phase space correctly. We also show that the Hoover NpT algorithm [W. G. Hoover, Phys. Rev. A. 31, 1695 (1985); 34, 2499 (1986)] does sample phase correctly, but only when periodic boundary conditions are employed.     

Shear viscosity of molten alkali halides from equilibrium and nonequilibrium molecular-dynamics simulations

The shear viscosity of molten NaCl and KCl was calculated through equilibrium (EMD) and nonequilibrium molecular-dynamics (NEMD) simulations in the canonical (N,V,T) ensemble. Two rigid-ion potentials were investigated, namely, the Born-Mayer-Huggins-Tosi-Fumi potential and the Michielsen-Woerlee-Graaf-Ketelaar potential with the parameters proposed by Ladd. The NEMD simulations were performed using the SLLOD equations of motion [D. J. Evans and G. P. Morriss, Phys. Rev. A 30, 1528 (1984)] with a Gaussian isokinetic thermostat and the results are compared with those obtained from Green-Kubo EMD (N,V,T) simulations and experimental shear viscosity data. The NEMD zero strain rate shear viscosity, eta(0), was obtained by fitting a simplified Carreau-type equation and by application of mode-coupling theory, i.e., a eta-gamma(1/2) linear relationship. The values obtained from the first method are found to be significantly lower than those predicted by the second. The agreement between the EMD and NEMD results with experimental data is satisfactory for the two potentials investigated. The ion-ion radial distribution functions obtained with the two rigid-ion potentials for both molten salts are discussed in terms of the differences between the two models.     

A proof of Jarzynski's nonequilibrium work theorem for dynamical systems that conserve the canonical distribution

We present a derivation of the Jarzynski [Phys. Rev. Lett. 78, 2690 (1997)] identity and the Crooks [J. Stat. Phys. 90, 1481 (1998)] fluctuation theorem for systems governed by deterministic dynamics that conserves the canonical distribution such as Hamiltonian dynamics, Nose-Hoover dynamics, Nose-Hoover chains, and Gaussian isokinetic dynamics. The proof is based on a relation between the heat absorbed by the system during the nonequilibrium process and the Jacobian of the phase flow generated by the dynamics.     

A validation of the p-SLLOD equations of motion for homogeneous steady-state flows

A validation of the p-SLLOD equations of motion for nonequilibrium molecular dynamics simulation under homogeneous steady-state flow is presented. We demonstrate that these equations generate the correct center-of-mass trajectory of the system, are completely compatible with (and derivable from) Hamiltonian dynamics, satisfy an appropriate energy balance, and require no fictitious external force to generate the required homogeneous flow. It is also shown that no rigorous derivation of the SLLOD equations exists to date.     

A simple, direct derivation and proof of the validity of the SLLOD equations of motion for generalized homogeneous flows

We present a simple and direct derivation of the SLLOD equations of motion for molecular simulations of general homogeneous flows. We show that these equations of motion (1) generate the correct particle trajectories, (2) conserve the total thermal momentum without requiring the center of mass to be located at the origin, and (3) exactly generate the required energy dissipation. These equations of motion are compared with the g-SLLOD and p-SLLOD equations of motion, which are found to be deficient. Claims that the SLLOD equations of motion are incorrect for elongational flows are critically examined and found to be invalid. It is confirmed that the SLLOD equations are, in general, non-Hamiltonian. We derive a Hamiltonian from which they can be obtained in the special case of a symmetric velocity gradient tensor. In this case, it is possible to perform a canonical transformation that results in the well-known DOLLS tensor Hamiltonian.     

Molecular dynamics in the isothermal-isobaric ensemble: the requirement of a "shell" molecule. II. Simulation results

The results of a series of constant pressure and temperature molecular-dynamics (MD) simulation studies based on the rigorous shell particle formulation of the isothermal-isobaric (NpT) ensemble are presented. These MD simulations validate the newly proposed constant pressure equations of motion in which a "shell" particle is used to define uniquely the volume of the system [M. J. Uline and D. S. Corti, J. Chem. Phys. (to be published), preceding paper]. Ensemble averages obtained with the new MD NpT algorithm match the ensemble averages obtained using the previously derived shell particle Monte Carlo NpT method [D. S. Corti, Mol. Phys. 100, 1887 (2002)]. In addition, we also verify that the Hoover NpT MD algorithm [W. G. Hoover, Phys. Rev. A 31, 1695 (1985); 34, 2499 (1986)] generates the correct ensemble averages, though only when periodic boundary conditions are employed. The extension of the shell particle MD algorithm to multicomponent systems is also discussed, in which we show for equilibrium properties that the identity of the shell particle is completely arbitrary when periodic boundary conditions are applied. Self-diffusion coefficients determined with the shell particle equations of motion are also identical to those obtained in other ensembles. Finally, since the mass of the shell particle is known, the system itself, and not a piston of arbitrary mass, controls the time scales for internal pressure and volume fluctuations. We therefore consider the effects of the shell particle on the dynamics of the system. Overall, the shell particle MD algorithm is an effective simulation method for studying systems exposed to a constant external pressure and may provide an advantage over other existing constant pressure approaches when developing nonequilibrium MD methods.     

Recovering the Crooks equation for dynamical systems in the isothermal-isobaric ensemble: a strategy based on the equations of motion

The Crooks equation [Eq. (10) in J. Stat. Phys. 90, 1481 (1998)] relates the work done on a system during a nonequilibrium transformation to the free energy difference between the final and the initial state of the transformation. Recently, the authors have derived the Crooks equation for systems in the canonical ensemble thermostatted by the Nose-Hoover or Nose-Hoover chain method [P. Procacci et al., J. Chem. Phys. 125, 164101 (2006)]. That proof is essentially based on the fluctuation theorem by Evans and Searles [Adv. Phys. 51, 1529 (2002)] and on the equations of motion. Following an analogous approach, the authors derive here the Crooks equation in the context of molecular dynamics simulations of systems in the isothermal-isobaric (NPT) ensemble, whose dynamics is regulated by the Martyna-Tobias-Klein algorithm [J. Chem. Phys. 101, 4177 (1994)]. Their present derivation of the Crooks equation correlates to the demonstration of the Jarzynski identity for NPT systems recently proposed by Cuendet [J. Chem. Phys. 125, 144109 (2006)].     

Numerical verification of the generalized Crooks nonequilibrium work theorem for non-Hamiltonian molecular dynamics simulations

The generalized Crooks theorem (GCT) for deterministic non-Hamiltonian molecular dynamics simulations [Phys. Rev. E 75, 050101 (2007)] connects the probabilities of nonequilibrium realizations switching the system between two thermodynamic states, to the partition functions of these states. In comparison to the "classical" Crooks nonequilibrium work theorem [J. Stat. Phys. 90, 1481 (1998)], which deals with realizations involving only mechanical work, the GCT also accounts for additional work resulting from changes of the intensive and extensive thermodynamic variables of the system. In this article we present a numerical verification of the GCT using a Lennard-Jones fluid model where two particles are subject to a time-dependent external potential. Moreover, in order to switch the system between different thermodynamic states, the temperature and the pressure (or volume), which are controlled through the Martyna-Tobias-Klein equations of motion [J. Chem. Phys. 101, 4177 (1994)], are also varied externally. The free energy difference between states characterized by different distances of the target particles is evaluated using both a standard methodology (pair radial distribution functions) and the GCT. In order to exploit the various options provided by the GCT approach, i.e., the possibility of temperature/pressure/volume changes during the realizations, the free energy difference is recovered via arbitrary thermodynamic cycles. In all tests, the GCT is quantitatively verified.     

Melting temperature of ice Ih calculated from coexisting solid-liquid phases

We carried out molecular-dynamics simulations by using the two-phase coexistence method with the constant pressure, particle number, and enthalpy ensemble to compute the melting temperature of proton-disordered hexagonal ice I(h) at 1-bar pressure. Four models of water were considered, including the widely used TIP4P [W. L. Jorgensen, J. Chandrasekha, J. D. Madura, R. W. Impey, and M. L. Klein, J. Chem. Phys.79, 926 (1983)] and TIP5P [M. W. Mahoney and W. L. Jorgensen J. Chem. Phys.112, 8910 (2000)] models, as well as recently improved TIP4P and TIP5P models for use with Ewald techniques-the TIP4P-Ew [W. Horn, W. C. Swope, J. W. Pitera, J. C. Madura, T. J. Dick, G. L. Hura, and T. Head-Gordon, J. Chem. Phys.120, 9665 (2004)] and TIP5P-Ew [S. W. Rick, J. Chem. Phys.120, 6085 (2004)] models. The calculated melting temperature at 1 bar is T(m) = 229 +/- 1 K for the TIP4P and T(m) = 272.0 +/- 0.6 K for the TIP5P ice I(h), both are consistent with previous simulations based on free-energy methods. For the TIP4P-Ew and TIP5P-Ew models, the calculated melting temperature is T(m) = 257.0 +/- 1.1 K and T(m) = 253.9 +/- 1.1 K, respectively.     

Electronic conductivity in polyaromatic hydrocarbon glasses: A theoretical perspective

Based upon Monte Carlo simulations of amorphous molecular glasses, we have computed the electronic structure of five prototypical polyaromatic hydrocarbons using an extended Su-Schrieffer-Heeger model [J. R. Schrieffer, W. P. Su, and A. J. Heeger, Phys. Rev. Lett. 42, 1698 (1979)]. In the presence of excess charges, the resulting potential energy surfaces have been analyzed using Marcus' [Annu. Rev. Phys. Chem. 15, 155 (1964)] theory of charge transfer to yield reaction coefficients and--via the application of linear response theory--local conductivities. Applying Kirchhoff's rules, the emerging random resistor network problem leads to global conductivities of the order of 10(-1)-1 Scm, which correlate with the structural characteristics of the underlying geometry.     

Hard spheres revisited: accurate calculation of the solid-liquid interfacial free energy

We revise the earlier [R. L. Davidchack and B. B. Laird, Phys. Rev. Lett. 85, 4751 (2000)] direct calculation of the hard sphere solid-liquid interfacial free energy by the cleaving walls method. The revisions of the method include modified interactions with the cleaving walls and the use of a nonequilibrium work measurements approach, which allows for a more robust control of the accuracy of the obtained results. We find that the new values are lower compared to the original ones, which is consistent with the more recent indirect estimates based on extrapolation from the soft-sphere results [R. L. Davidchack and B. B. Laird, Phys. Rev. Lett. 94, 086102 (2005)], as well as those obtained using the capillary fluctuations method [R. L. Davidchack, J. R. Morris, and B. B. Laird, J. Chem. Phys. 125, 094710 (2006)].     

Excitation energies for a benchmark set of molecules obtained within time-dependent current-density functional theory using the Vignale-Kohn functional

In this article we explain how the existing linear response theory of time-dependent density-functional theory can be extended to obtain excitation energies in the framework of time-dependent current-density-functional theory. We use the Vignale-Kohn current-functional [G. Vignale and W. Kohn, Phys. Rev. Lett. 77, 2037 (1996)] which has proven to be successful for describing ultranonlocal exchange-correlation effects in the case of the axial polarizability of molecular chains [M. van Faassen, P. L. de Boeij, R. van Leeuwen, J. A. Berger, and J. G. Snijders, Phys. Rev. Lett. 88, 186401 (2002); J. Chem. Phys. 118, 1044 (2003)]. We study a variety of singlet excitations for a benchmark set of molecules. The pi(*)<--pi transitions obtained with the Vignale-Kohn functional are in good agreement with experiment and other theoretical results and they are in general an improvement upon the adiabatic local density approximation. In case of the pi(*)<--n transitions the Vignale-Kohn functional fails, giving results that strongly overestimate the experimental and other theoretical results. The benchmark set also contains some other types of excitations for which no clear failures or improvements are observed.     

Escorted free energy simulations

We describe a strategy to improve the efficiency of free energy estimates by reducing dissipation in nonequilibrium Monte Carlo simulations. This strategy generalizes the targeted free energy perturbation approach [C. Jarzynski, Phys. Rev. E 65, 046122 (2002)] to nonequilibrium switching simulations, and involves generating artificial, "escorted" trajectories by coupling the evolution of the system to updates in external work parameter. Our central results are: (1) a generalized fluctuation theorem for the escorted trajectories, and (2) estimators for the free energy difference ΔF in terms of these trajectories. We illustrate the method and its effectiveness on model systems.     

Prediction of viscosity for molecular fluids at experimentally accessible shear rates using the transient time correlation function formalism

Nonequilibrium molecular dynamics (NEMD) simulations were performed and the transient time correlation function (TTCF) method applied to calculate the shear viscosity of n-decane. Using the TTCF method we were able to calculate the viscosity at shear rate orders of magnitude lower than is possible by direct NEMD simulation alone. For the first time for a molecular fluid, we were able to simulate shear rates accessible by experimental measurements, which are typically performed at shear rates well below those accessible by NEMD simulation. The TTCF method allows us to close the gap between the lowest shear rates accessible by MD simulation and the highest shear rates possible in experimental studies. Additionally a multiple time step method for Gaussian thermostatted SLLOD equations of motion was developed following earlier work [G. A. Pan et al., J. Chem. Phys. 122, 4114 (2005)] for atomic fluids.     

Statistical mechanical theory for steady state systems. VI. Variational principles

Several variational principles that have been proposed for nonequilibrium systems are analyzed. These include the principle of minimum rate of entropy production due to Prigogine [Introduction to Thermodynamics of Irreversible Processes (Interscience, New York, 1967)], the principle of maximum rate of entropy production, which is common on the internet and in the natural sciences, two principles of minimum dissipation due to Onsager [Phys. Rev. 37, 405 (1931)] and to Onsager and Machlup [Phys. Rev. 91, 1505 (1953)], and the principle of maximum second entropy due to Attard [J. Chem.. Phys. 122, 154101 (2005); Phys. Chem. Chem. Phys. 8, 3585 (2006)]. The approaches of Onsager and Attard are argued to be the only viable theories. These two are related, although their physical interpretation and mathematical approximations differ. A numerical comparison with computer simulation results indicates that Attard's expression is the only accurate theory. The implications for the Langevin and other stochastic differential equations are discussed.     

Artifacts in dynamical simulations of coarse-grained model lipid bilayers

With special focus on dissipative particle dynamics simulations of anisotropic and complex soft matter, such as lipid bilayers in water, we have investigated the occurrence of artifacts in the results obtained from dynamical simulations of coarse-grained particle-based models. The particles are modeled by beads that interact via soft repulsive conservative forces (as defined in dissipative particle dynamics simulations), harmonic bond potentials, as well as bending potentials imparting stiffness to the lipid tails. Two different update schemes are investigated: dissipative particle dynamics with a velocity-Verlet-like integration scheme [G. Besold, I. Vattulainen, M. Karttunen, and J. M. Polson, Phys. Rev. E 63, R7611 (2000)] and Lowe-Andersen thermostatting [C. P. Lowe, Europhys. Lett. 47, 145 (1999)] with the standard velocity-Verlet integration algorithm. By varying the integration time step, we examine various physical quantities, in particular pressure profiles and kinetic bead temperatures, for their sensitivity to artifacts caused by the specific combination of integration technique and the thermostat. We then propose a simple fingerprint method that allows monitoring the presence of simulation artifacts.