Preparation of CdS–TiO2/Fe3O4 photocatalyst and its photocatalytic properties

The CdS modified TiO₂/Fe₃O₄ photocatalysts were prepared by sol–gel and immersion methods. The morphological, structural and optical properties of as-prepared samples were characterized by X-ray diffraction (XRD), UV–Vis absorption spectra, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The TEM observation showed that the surface of magnetite particles (Fe₃O₄) were coated by CdS–TiO₂ layer as loose clusters, and average diameter of composites particles was about 250 nm. UV–Vis absorption spectra indicated that CdS–TiO₂/Fe₃O₄ composites had pronounced red-shift compared with that of TiO₂/Fe₃O₄. The CdS–TiO₂/Fe₃O₄ composites exhibit higher photocatalytic activity than pure TiO₂ and TiO₂/Fe₃O₄ for the degradation of Reactive Brilliant Red X-3B dye (X-3B) aqueous solution under simulated sunlight, and the optimum content of CdS is 1.0 % (mol ratio of CdS to TiO₂). In addition, a gradual loss of photocatalytic activity can be observed in reusability test of CdS–TiO₂/Fe₃O₄ composites, and degradation of X-3B reached still to 78.9 % after five runs.     

Photodegradation of 2-nitrophenol catalyzed by CoO, CoS and CoO/CoS nanoparticles

The nanoparticles of CoO, CoS and CoO/CoS composite are synthesized using precipitation method. The X-ray diffraction, UV–Vis absorption spectroscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy and FT-IR spectroscopy are used to characterize the prepared nanoparticles. The EDX analysis shows the formation of CoO_0.67S_0.33 composite. The XRD pattern indicates the hexagonal structure for nanocomposite. The formation of Co–O and Co–S bonds is confirmed by FT-IR spectra. The band-gap energies of 2.97, 3.06 and 2.91 eV are obtained from UV–Vis spectra of CoO, CoS and CoO/CoS nanoparticles, respectively. The results of photodegradation of 2-nitrophenol show that the photoreactivity order of nanocatalysts is CoO/CoS > CoO > CoS. The pseudo first-order kinetic rate constants of 6.4 × 10^?3, 4.3 × 10^?3 and 12.2 × 10^?3 min^?1 are obtained for CoO, CoS and CoO/CoS nanoparticles, respectively, at photodegradation reaction conditions of pH 10, 30 mg/L of 2-NP and 1.3 g/L of the catalyst. The proposed nanocomposite shows an acceptable reusability and stability against photocorrosion in four-cycle photodegradation experiments.     

Solvothermal preparation,and characterization,of Cu–Ag nanoparticles

Cu–Ag nanoparticles have been successfully synthesized by one-pot solvothermal treatment of a mixture of AgNO₃ and Cu(OAc)₂·H₂O in ethylene glycol solution at 180 °C for 10 h. The samples were characterized by UV–visible absorption, X-ray diffraction (XRD), and extended X-ray absorption fine structure (EXAFS) spectroscopy, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). The results showed that Cu–Ag nanoparticles and a small amount of phase-separated Cu–Ag alloy nanoparticles with an average diameter of 100 ± 30 nm were synthesized by the solvothermal treatment procedure. The mechanism of formation is discussed.     

Synthesis and photocatalytic activity of nanocrystalline TiO2 co-doped with nitrogen and cobalt(II)

Nitrogen-modified cobalt-doped TiO₂ materials were successfully prepared via a modified sol–gel method. The structure and properties of the catalysts were characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM, ultraviolet–visible light diffuse reflectance spectra (UV–Vis DRS), N₂ adsorption–desorption isotherms, and energy-dispersive X-ray spectroscopy. The XRD patterns of the pure and co-doped TiO₂ samples indicate that the predominant phase was anatase. The average grain size obtained from TEM was approximately 10 nm. The Brunauer–Emmett–Teller analysis results indicate that the specific surface area was 77.7 m² g^?1. The UV–Vis DRS results for the co-doped sample reveal an absorption edge that had been red-shifted to 500 nm. The photocatalytic activities of the samples were evaluated through photodegradation of papermaking wastewater under UV and visible light irradiation. Compared with the cobalt-doped TiO₂ sample and Degussa P25, the 3 mol% N-doped mesoporous N/Co-TiO₂ photocatalyst exhibited the highest photocatalytic activity, which can be ascribed to the synergistic effect of the N and Co co-doping.     

Synthesis, structural and photocatalytic studies of Mn-doped CdS nanoparticles

Mn-doped CdS nanoparticles (Cd_1?x Mn _x S; where x = 0.00–0.10) were synthesized by a chemical precipitation method. The synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscope, transmission electron microscope (TEM), and UV–Vis spectrometer. The XRD and TEM measurements show that the size of crystallites is in the range of 10–40 nm. Optical measurements indicated a red shift in the absorption band edge upon Mn doping. The direct allowed band gaps of undoped and Mn-doped CdS nanoparticles measured by UV–Vis spectrometer were 2.3 and 2.4 eV at 400 °C, respectively. Photocatalytic activities of CdS and Mn-doped CdS were evaluated by irradiating the solution to ultraviolet light and taking methyl orange (MO) as organic dye. It was found that 5 mol% Mn-doped CdS bleaches MO much faster than undoped CdS upon its exposure to the ultraviolet light. The experiment demonstrated that the photo-degradation efficiency of 5 mol% Mn-doped CdS was significantly higher than that of undoped CdS.     

Preparation of large-area dye-sensitized solar cells based on hydrothermally synthesized nitrogen-doped TiO2 powders

Low-cost, yellowish, nanocrystalline nitrogen-doped titanium dioxide (N-doped TiO₂) powder was synthesized by a hydrothermal method. The as-prepared N-doped TiO₂ powder was characterized by X-ray diffraction, transmission electron microscopy (TEM), UV–Vis absorption spectra, X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller analysis techniques. The grain size of the prepared powder was around 13 nm as estimated by both Scherrer’s method and TEM images. The effect of the ratio of N-doped TiO₂ particles to Degussa P25 on the photovoltaic performance of large-area dye-sensitized solar cells (DSSCs) was also investigated. The N-doped TiO₂ electrode showed higher photovoltaic performance compared with that of pure P25 at constant irradiation of 100 mW cm^?2, which is attributed to the large pore size and high surface area of N-doped TiO₂ resulting in the introduction of extra charge carrier pathways that could be beneficial for overall charge transportation. Energy conversion efficiency of 5.12 % was achieved in a DSSC device with active area of 51.19 cm².     

Synthesis of CaWO4:Er3+@SiO2 and CaWO4:Tm3+@SiO2 nano-particles via a combustion pathway and study of their optical properties

Use of citric acid as a chelating agent and fuel, ammonium nitrate as fuel, boric acid as flux material and silica as supports, CaWO₄:Ln³⁺@SiO₂ (Ln = Er and Tm) nanoparticles were synthesized via a combustion reaction at 800 °C. Characterization of the samples was performed by X-ray diffractometer (XRD), reflectance UV–Vis spectrophotometer, fluorescence spectrophotometer (PL) and transmission electron microscope (TEM). XRD patterns showed that tetragonal crystalline structure of scheelite and silica supports were formed, and that the formation of a silica support could enhance the luminescence intensity of CaWO₄:Ln³⁺. The reflectance UV–Vis and PL spectra indicated the broad absorption band of WO₄ ^2? groups about 240 nm, the WO₄ ^2? wide excitation band with maximum at 240 nm, a broad emission band of WO₄ ^2? with maximum about 420 nm, and characteristic emissions of Ln³⁺ ions. According to the TEM analysis, CaWO₄:Er³⁺@SiO₂ and CaWO₄:Tm³⁺@SiO₂ nanoparticles have almost the same morphology with average particle sizes about 50 nm.     

Plasma-Assisted Synthesis of TiO2 Nanorods by Gliding Arc Discharge Processing at Atmospheric Pressure for Photocatalytic Applications

The present study explores a new method of synthesis of TiO₂ nano-particles in an aqueous medium from TiCl₃ precursor by non-thermal plasma in humid air as feeding gas obtained at atmospheric pressure. The precursor solution, TiCl₃ is oxidized by strongly reactive species generated by gliding arc plasma (HO^· = 2.85 V/SHE) to produce titanium oxide powders. The synthesized powder was characterised by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, FTIR spectroscopy, nitrogen physisorption, and UV–Vis spectroscopy. The results obtained showed that the material consists of rod-shaped nanoparticles of rutile and anatase phases. The presence of TiO₂ phases was confirmed by FTIR spectrum and textural analyses showed that the material is mesoporous with specific surface area of 158 m² g^?1. UV–Visible spectrum of the plasma-synthesized TiO₂ sample showed that it absorbs in the UV–A region leading to effective use as a photocatalyst under visible light.     

Fabrication and characterization of NiTiO3 nanofibers by sol–gel assisted electrospinning

Continuous NiTiO₃ nanofibers have been successfully synthesized by a sol–gel assisted electrospinning method followed by calcination at 600 °C in air. These nanofibers were characterized for the morphological, structural and optical properties by scanning electron microscopy (SEM), energy-dispersive X-ray spectrum (EDS), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and UV–visible (UV–vis) diffuse reflectance spectroscopy (DRS). SEM results reveal that the obtained NiTiO₃ nanofibers are 175 nm in diameter and several micrometers in length after annealing at 600 °C. The XRD analysis shows that the nanofibers possess highly crystalline structure with no impurity phase. In contrast, the NiTiO₃ nanoparticles synthesized at the identical conditions by a sol–gel route have impurities including TiO₂ and NiO. Moreover, the electrospun NiTiO₃ nanofibers are endowed with an obvious optical absorbance in the visible range, demonstrating they have visible light photoresponse.     

Synthesis of Co2+-doped Fe2O3 photocatalyst for degradation of pararosaniline dye

In this paper, x (=2, 5, 7 and 10mol%) Co²⁺-doped Fe₂O₃ (xCo:Fe₂O₃) nanoparticles with enhanced photocatalytic activity have been reported. xCo:Fe₂O₃ nanoparticles were successfully prepared by co-precipitation followed thermal decomposition method. The structural, optical and morphological properties of the prepared samples were studied by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), diffuse reflectance (DR) UV–visible absorption spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The obtained results revealed that Co²⁺ ions were well doped within the lattices of Fe₂O₃. Also, Co²⁺ ions suppress the formation of the most stable α- Fe₂O₃ and stabilize less stable γ-Fe₂O₃ at 450 °C. The photocatalytic activity of xCo:Fe₂O₃ was examined by using pararosaniline (PR) dye. It was found that photocatalytic degradation of PR depends on dopant concentration (Co²⁺ ions). Relatively, the highest photocatalytic activity was observed for 5%Co:Fe₂O₃ nanoparticles. The plausible photocatalytic degradation pathway of PR at xCo:Fe₂O₃ surface has also been proposed.     

Surface alkaline-acidic and photocatalytic properties of MMoO4 (M = Fe2+, Co2+, Ni2+) nanoparticles in different media conditions

MMoO₄ (M = Fe²⁺, Co²⁺, Ni²⁺) nanocrystaline particles with similar nanoscale particle size were synthesized by a salt aqueous solution reaction. UV–Vis absorbance spectra show that the nanoparticles are of good light absorbance in UV–Vis light region and narrow band gap. The variation in oxidation–reduction potential (ORP) of selected methyl orange aqueous solution due to the presence of the nanoparticles is measured in various conditions. The light absorption and the ORP determine the photodegradation rate of the aqueous methyl orange solution on the nanoparticles. The ORP is clearly also a necessary and useful parameter in research on and applications of the photocatalysis.     

Green Synthesis and Characterization of Silver Nanoparticles Using Ascomycota Fungi Penicillium nalgiovense AJ12

A new method for green synthesis of silver nanoparticles using the cell-free filtrate of Penicillium nalgiovense AJ12 as reducing and protecting agent was described. The pathway is based on the reduction of Ag¹⁺ by protein(s). Various techniques such as UV–Vis spectroscopy, transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared and Zeta potential measurements were used to characterize the silver nanoparticle obtained. The results revealed synthesis of the spherical silver nanoparticles coated with protein(s). The average size of the particles obtained from TEM was 15.2 ± 2.6 nm. DLS measurements showed that the particle size was higher than that estimated from TEM measurements and was 25.2 ± 2.8 nm. Studies on the role of the cell-free filtrate proteins in the synthesis of silver nanoparticles indicated that the process is non-enzymatic but involves amino acids interactions with silver ions. It was found that the aqueous silver nanoparticles suspensions exhibited excellent stability over a wide range of ionic strength, pH and temperature.     

Synthesis and characterization of chitosan–polyvinylpyrrolidone–bovine serum albumin-coated magnetic iron oxide nanoparticles as potential carrier for delivery of tamoxifen

The proposed study examined the preparation of chitosan (CS)–polyvinylpyrrolidone (PVP)–bovine serum albumin (BSA)-coated magnetic iron oxide (Fe₃O₄) nanoparticles (Fe₃O₄–CS–PVP–BSA) to use as potential drug delivery carriers for delivery of tamoxifen drug (TAM) . The anticancer drug selected in this study was tamoxifen which can be used for the human breast cancer treatment. These prepared nanoparticles were characterized by FTIR, XRD, SEM, AFM, TEM, CD and VSM techniques. The swelling studies have been measured at different (10, 20, 30, 40, 50%) drug loading. The mean particle size of the tamoxifen-loaded nanoparticles system (Fe₃O₄–CS–TAM, Fe₃O₄–CS–TAM–PVP and Fe₃O₄–CS–TAM–PVP–BSA) as measured by Malvern Zetasizer ranged between 350 ± 2.3 and 601 ± 1.7 nm. As well as these drug-loaded nanoparticles were positively charged. The zeta potential was in the range of 28.9 ± 3.5 and 50.8 ± 3.9 mV. The encapsulation efficiency was between 63.60 ± 2.11 and 96.45 ± 2.12%. Furthermore, in vitro release and drug loading efficiency from the nanoparticles were investigated. The cytotoxicity of prepared nanoparticles was verified by MTT assay. In vitro release studies were executed in 4.0 and 7.4 pH media to simulate the intestinal and gastric conditions and different temperature (37 and 42 °C). Hence, the prepared tamoxifen-loaded nanoparticles system (Fe₃O₄–CS–TAM, Fe₃O₄–CS–TAM–PVP and Fe₃O₄–CS–TAM–PVP–BSA) could be a promising candidate in cancer therapy.     

Ultrasound-assisted synthesis of monodisperse Ru–B amorphous alloys with enhanced catalytic activity in maltose hydrogenation

Monodisperse Ru–B amorphous alloy catalysts were synthesized by ultrasound-assisted chemical reduction of (NH₄)₂RuCl₆ with BH ₄ ^? . With the characterization of X-ray diffraction (XRD), selective area electronic diffraction (SAED), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM), the resulting Ru–B nanoparticles were identified to be amorphous alloys ranging in size from 2.4 to 4.9 nm. During liquid-phase maltose hydrogenation, the as-synthesized Ru–B catalyst was extremely active compared to the regular Ru–B obtained via the reduction of RuCl₃ with BH ₄ ^? . The Ru–B sample prepared under ultrasonication with 60 W was proven to be the most active catalyst. Its catalytic activity was nearly 11 times that of industrial Raney Ni, and could be used repetitively for more than six times without significant deactivation.     

Fe3O4磁性纳米粒子的超声包金及其表征

超声条件下, 在乙醇分散的3-氨丙基三乙氧基硅烷(APTES)功能化的磁性Fe₃O₄纳米粒子和四氯合金酸的混合溶液中滴加柠檬酸钠, 成功地制备了磁性Fe₃O₄/Au复合纳米粒子. 采用X射线粉末衍射仪(XRD)、紫外吸收可见光谱(UV-Vis)、带有电子能谱仪(EDS)的扫描电子显微镜(SEM)、透射电子显微镜(TEM)、光电子能谱(XPS)、超导量子干涉仪(SQUID)等方法, 对复合粒子的形态、结构、组成以及磁学性质进行了表征. 结果表明: 在此条件下制得的复合粒子粒径在30 nm左右, 室温下磁化强度可达63 emu/g.     

Cu-doping effect on structural, optical and photoluminescence properties of Zn0.96−xFe0.04CuxO (x = 0, 0.02, 0.04, 0.06, 0.08 and 0.1) nanopowders by sol–gel method

Zn_0.96?xFe_0.04Cu_xO (x = 0, 0.02, 0.04, 0.06, 0.08, 0.10) nanopowders have been synthesized by sol–gel method. The synthesized samples have been characterized by powder X-ray diffraction, energy dispersive X-ray spectra, X-ray photoelectron spectroscopy, UV–visible spectrophotometer and Fourier transform infrared spectroscopy. The XRD measurement reveals that the prepared nanopowders have different microstructure without changing a hexagonal wurtzite structure. The calculated average crystalline size increases from 20.9 to 22.1 nm for x = 0 to 0.02 then gradually decreases to 18.2 nm for x = 0.10 which were confirmed by SEM and TEM micrographs. The change in lattice parameters, micro-strain, and shift of X-ray diffraction peaks towards lower angles and increase of energy gap reveal the substitution of Cu²⁺ ions into Zn–Fe–O matrix. X-ray photoelectron spectroscopy study described the increase of oxygen vacancies with increase of Cu concentrations, which was found to enhance the green emission. The presence of functional groups and the chemical bonding is confirmed by FTIR spectra. Photoluminescence spectra of Zn_0.96?xFe_0.04Cu_xO system shows that the blue shift in NBE ultraviolet emission from 389 to 369 nm and the same blue shift in green band emission from 552 to 535 nm with enhancing intensity confirms the substitution of Cu into the Zn–Fe–O lattice. Cu-doped Zn_0.96?xFe_0.04Cu_xO system is appreciable for the fabrication of nano-optoelectronic devices like tunable light emitting diode in the near future.     

Simultaneous determination of dopamine, uric acid and ascorbic acid with LaFeO3 nanoparticles modified electrode

LaFeO₃ nanoparticles of approximately 22 nm in size were synthesized and characterized by XRD and TEM. A novel glassy carbon electrode modified with LaFeO₃ nanoparticles was constructed and characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The modified electrode exhibited strong promoting effect and high stability toward the electrochemical oxidation of dopamine (DA), which gave reversible redox peaks with a formal potential of 0.145 V (vs. Ag/AgCl) in pH 7.0 phosphate buffer solution. The anodic peak current (measured by constant potential amperometry) increased linearly with the concentration of dopamine in the range from 1.5?×?10^?7 to 8.0?×?10^?4 M. The detection limit was 3.0?×?10^?8 M. The relative standard deviation of eight successive scans was 3.47% for 1.0?×?10^?6 M DA. The interference by ascorbic acid was eliminated efficiently. The method was used to determine DA in dopamine hydrochloride injections and showed excellent sensitivity and recovery.     

Assembly immobilized palladium(0) on carboxymethylcellulose/Fe3O4 hybrid: An efficient tailor‐made magnetically catalyst for the Suzuki–Miyaura couplings

The Pd nanoparticles (Pd NPs) embedded on magnetically retrievable carboxymethylcellulose/Fe₃O₄ (Pd⁰@CMC/Fe₃O₄) organic/inorganic hybrid were prepared via the conventional simple process. The presence of the hydroxyl and carboxyl groups within the framework of the magnetic hybrid enables the facile preparation and stabilization of Pd NPs in this organic/inorganic hybrid. This hybrid catalyst was very effective in the Suzuki – Miyaura reaction of a variety of aryl halides with arylboronic acid to afford excellent product yields. The catalyst showed good stability and could be easily recovered with an external magnetic field and reused for several times without a significant loss in its catalytic activity. Furthermore, the Pd⁰@CMC/Fe₃O₄ hybrid catalyst was fully characterized by UV–Vis, FT–IR, XRD, SEM, EDX, TEM, XPS and TGA techniques. The hot filtration test suggests that a homogeneous mechanism is operative in Suzuki – Miyaura reaction.     

Preparation of novel hybrid nanomaterials based on LaFeO3 and phosphotungstic acid as a highly efficient magnetic photocatalyst for the degradation of methylene blue dye solution

Novel magnetic hybrid nanomaterials 1 (LaFeO₃.Fe₃O₄@SiO₂-NH₂/PW₁₂) were synthesized by supporting phosphotungstic acid (H₃PW₁₂O₄₀; PW₁₂) on LaFeO₃.Fe₃O₄ nanomaterials through sono-assisted method. The synthesized nanomaterials were fully characterized by using FT-IR, XRD, UV–vis, BET-BJH, VSM, SEM, and TEM analyses. FT-IR, XRD, and UV–vis confirmed successful synthesis of nanomaterials. The SEM and TEM images revealed spherical morphology with core-shell structure for hybrid nanomaterials 1 . VSM results confirmed the magnetic property of hybrid nanomaterials 1 and suggested it as easily recyclable photocatalyst for removal of organic dyes from aqueous solution. The photocatalytic activity of hybrid nanomaterials 1 has been studied over the degradation of methylene blue (MB) and methyl orange (MO) solution under UV–vis light irradiation. Importantly the hybrid nanomaterials 1 showed outstanding degradation efficiency for MB solution in comparison with bare LaFeO₃.Fe₃O₄ and PW₁₂. The photocatalytic activity was enhanced mainly due to the high efficiency in separation of electron–hole pairs induced by the remarkable synergistic effects of LaFeO₃.Fe₃O₄ and PW₁₂ semiconductors. After the photocatalytic reaction, the nanocomposite can be easily separated from the reaction solution and reused several times without loss of its photocatalytic activity. Trapping experiments indicated that hole (h_VB⁺) and ^•OH radicals were the main reactive species for dye degradation in the present photocatalytic system. On the basis of the experimental results and estimated band gaps, the mechanism for the enhanced photocatalytic activity was proposed.     

Effect of Curcuma longa tuber powder extract on size of silver nanoparticles prepared by green method

Biosynthesis of noble metal nanoparticles is a vast developing area of research. In the present study, silver nanoparticles (Ag-NPs) were synthesized from aqueous silver nitrate through a simple and biosynthetic route using water extract of Curcuma longa (C. longa) tuber powder, which acted simultaneousl as a reductant and stabilizery. The as-prepared samples are characterized using UV–Visible, XRD, TEM, SEM, EDXF, and FT-IR techniques. The formation of Ag-NPs is evidenced by the appearance of the signatory brown color of the solution and UV–vis spectra. Formation of Ag/C. longa was determined by UV–Vis spectroscopy where surface plasmon absorption maxima can be observed at 457–415 nm from the UV–Vis spectrum. The XRD analysis shows that the Ag-NPs are of a face-centered cubic structure. Well-dispersed Ag-NPs with anisotropic and isotropic morphology for 5, 10, and 20 mL of C. longa water extract having a size less than 10 nm are seen in TEM images. The optimum volume extraction to synthesize smallest particle size was 20 mL with mean diameter and standard division 4.90 ± 1.42 nm. FT-IR spectrum indicates the presence of different functional groups in capping the nanoparticles with C. longa. The zeta potential analysis results indicated that the charge of C. longa was negative and increased in Ag/C. longa emulsion with increasing of volumes of extract used (10–20 mL). The most needed outcome of this work will be the development of value-added products from C. longa for biomedical and nanotechnology-based industries.