Functionalized cyclodiphosphazanes cis-[BuNP(OR)]2 (R=C6H4OMe-o, CH2CH2OMe, CH2CH2SMe, CH2CH2NMe2) as neutral 2e, 4e or 8e donor ligands

Cyclodiphosphazanes having donor functionalities such as cis-[^tBuNP(OR)]₂ (R = C₆H₄OMe-o (2); R = CH₂CH₂OMe (3); R = CH₂CH₂SMe (4); R = CH₂CH₂NMe₂ (5)) were obtained in good yield by reacting cis-[^tBuNPCl]₂ (1) with corresponding nucleophiles. The reactions of 2-5 with [RuCl₂(η⁶-cymene)]₂, [MCl(COD)]₂ (M = Rh, Ir), [PdCl₂(PEt₃)]₂ and [MCl₂(COD)] (M=Pd, Pt) result in the formation of exclusively monocoordinated mononuclear complexes of the type cis-[{^tBuNP(OR)}₂ML_n-κP] irrespective of the reaction stoichiometry and the reaction conditions. In contrast, 2-5 react with [RhCl(CO)₂]₂, [PdCl(η³-C₃H₅)]₂, CuX (X=Cl, Br, I) to give homobinuclear complexes. Interestingly, CuX produces both mono and binuclear complexes depending on the stoichiometry of the reactants and the reaction conditions. The mononuclear complexes on treatment with appropriate metal reagents furnish heterometallic complexes.     

Ruthenium-catalyzed transfer hydrogenation of aromatic ketones with aminophosphine or bis(phosphino)amine ligands derived from isopropyl substituted anilines

A series of new highly active Ru(II) complexes with two new (N-diphenylphosphino)isopropylanilines, having an isopropyl substituent at carbon 2- (1) or 2,6- (2) and two new bis(diphenylphosphino)isopropylanilines, having an isopropyl substituent at carbon atom 2- (3) or 4- (4), were prepared starting from the dimeric complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂. All the compounds have been fully characterized by microanalysis, IR, ³¹P{1H} NMR, ¹H NMR and ¹³C NMR spectroscopies. Following activation by NaOH, complexes 5–8 were tested in the transfer hydrogenation of acetophenone derivatives with iso-PrOH as the hydrogen source. Catalytic studies showed that the complexes are excellent catalytic precursors for the transfer hydrogenation of acetophenone derivatives.     

Reactivity of benzil bis(4-methyl-3-thiosemicarbazone) with cadmium nitrate. Crystal structure of [Cd(LMe2H4)(NO3)2][Cd(LMe2H4)(NO3)(H2O)]NO3 · H2O

The reaction between cadmium nitrate dihydrate and benzil bis(4-methyl-3-thiosemicarbazone), LMe₂H₄, depends on the working conditions. In methanol the reaction gives the novel complex [Cd(LMe₂H₄)(NO₃)₂][Cd(LMe₂H₄)(NO₃)(H₂O)]NO₃ · H₂O (1). Its crystal structure shows the presence of two cadmium atoms with different coordination numbers, seven and eight, and the ligands acting as N₂S₂ neutral molecules. One cadmium has the coordination sphere completed by a bidentate nitrato group and a water molecule, whereas the other one is bonded to two bidentate nitrato groups. Both molecules are joined to one nitrate ion and to an additional water molecule by hydrogen bonds. In the presence of lithium hydroxide, the reaction leads to a binuclear complex with the ligand doubly deprotonated [Cd(LMe₂H₂)]₂ (2). The complexes were characterized by elemental analysis, mass spectrometry, ¹³C and ¹¹³Cd CP/MAS NMR and, in the case of complex 1, by X-ray diffraction.     

Reaction of [CpRu(CH3CN)3]PF6 with bidentate ligands: structural characterization of [{CpRu(CH3CN)2}2(μ-η-dppe)](PF6)2 [dppe=1,2-bis(diphenylphosphino)ethane]

The reaction of [CpRu(CH₃CN)₃]PF₆ with the bidentate ligands L-L=1,2-bis(diphenylphosphino)ethane, dppe, and (1-diphenylarsino-2-diphenylphosphino)ethane, dpadppe, affords mononuclear or dinuclear complexes of formula [CpRu(η²-L-L)(CH₃CN)]PF₆, [{CpRu(CH₃CN)₂}₂(μ-η^1:1-L-L)](PF₆)₂ and [{CpRu(CH₃CN)}₂(μ-η^1:1-L-L)₂](PF₆)₂ (L-L=dppe, dpadppe). All of the compounds are characterized by microanalysis and NMR [¹H and ³¹P{¹H}] spectroscopy. The crystal structure of [{CpRu(CH₃CN)₂}₂(μ-η^1:1-dppe)](PF₆)₂ has been determined by X-ray diffraction analysis. The complex exhibits a dppe ligand bridging two CpRu(CH₃CN)₂ fragments.     

Transition metal (Group 6, Ru and Group 10) derivatives of aminophosphines, Ph2PN(H)R (R=Ph, C6H11)

The reactions of aminophosphines with Group 6 metal carbonyls afford both mono-substituted and disubstituted complexes. The reaction of Ph₂PN(H)C₆H₁₁ with molybdenum tetracarbonyl derivative gives a mixture of cis and trans-isomers. The reaction of Ph₂PN(H)Ph with Pd(COD)Cl₂ leads to the PN bond cleavage to give chloro bridged dimer, [Pd(PPh₂O)(PPh₂OH)(μ-Cl)]₂, whereas with Pt(COD)Cl₂, disubstituted cis-[PtCl₂{PPh₂N(H)R}₂]₂ was obtained. The reaction of Ph₂PN(H)C₆H₁₁ with RuCl₂(DMSO)₄ or RuCl₂(PPh₃)₃ leads to the formation of ionic complex, [RuCl{Ph₂PN(H)C₆H₁₁}₃]Cl.     

Synthesis of titanium(IV) complexes that contain the Bis(silylamide) ligand of the type [1,8-C10H6(NR)2], and alkene polymerization catalyzed by [1,8-C10H6(NR)2]TiCl2-cocatalyst system

[1,8-C₁₀H₆(NR)₂]TiCl₂ (3; R=SiMe₃, SiⁱBuMe₂, SiⁱPr₃) complexes have been prepared from dilithio salts [1,8-C₁₀H₆(NR)₂]Li₂ (2) and TiCl₄ in diethyl ether in moderate yields (60–63%). These complexes showed significant catalytic activities for ethylene polymerization and for ethylene/1-hexene copolymerization in the presence of methylaluminoxane (MAO), methyl isobutyl aluminoxane (MMAO), AlⁱBu₃– or AlEt₃–Ph₃CB(C₆F₅)₄ as a cocatalyst. The catalytic activities performed in heptane (cocatalyst MMAO) were higher than those carried out in toluene (cocatalyst MAO): 709 kg-PE/mol-Ti·h could be attained for ethylene polymerization by using [1,8-C₁₀H₆(NSiⁱBuMe₂)₂]TiCl₂–MMAO catalyst system.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Synthesis, characterization and reactivity of the molybdenum(VI) complex [MoCl(NAr)2(CH2CMe2Ph)] (Ar=2,6-Pr2C6H3)

The compounds [MoCl(NAr)₂R] (R=CH₂CMe₂Ph (1) or CH₂CMe₃(2); Ar=2,6-Prⁱ₂C₆H₃) have been prepared from [MoCl₂(NAr)₂(dme)] (dme=1,2-dimethoxyethane) and one equivalent of the respective Grignard reagent RMgCl in diethyl ether. Similarly, the mixed-imido complex [MoCl₂(NAr)(NBu^t)(dme)] affords [MoCl(NAr)(NBu^t)(CH₂CMe₂Ph)] (3). Chloride substitution reactions of 1 with the appropriate lithium reagents afford the compounds [MoCp(NAr)₂(CH₂CMe₂Ph)] (4) (Cp=cyclopentadienyl), [MoInd(NAr)₂(CH₂CMe₂Ph)] (5) (Ind=Indenyl), [Mo(OBu^t)(NAr)₂(CH₂CMe ₂Ph)] (6), [MoMe(NAr)₂(CH₂CMe₂Ph)] (7), [MoMe(PMe₃)(NAr)₂(CH₂CMe ₂Ph)] (8) (formed in the presence of PMe₃) and [Mo(NHAr)(NAr)₂(CH₂CMe₂P h)](9). In the latter case, a by-product {[Mo(NAr)₂(CH₂CMe₂Ph) ]₂(μ-O)}(10) has also been isolated. The crystal structures of 1, 4, 5 and 10 have been determined. All possess distorted tetrahedral metal centres with cis near-linear arylimido ligands; in each case (except 5, for which the evidence is unclear) there are α-agostic interactions present.     

Syntheses, structures and magnetic properties of five iron(II) coordination polymers with flexible bis(imidazole) and bis(triazole) ligands

Five iron(II) coordination polymers, {[Fe(bte)₂(NCS)₂][Fe(bte)(H₂O)₂(NCS)₂]}_n (1), [Fe(bime)(NCS)₂]_n (2), [Fe(bime)(dca)₂]_n (3), [Fe(bime)₂(N₃)₂]_n (4) and [Fe(btb)₂(NCS)₂]_n (5), were synthesized using the flexible ligands 1,2-bis(1,2,4-triazol-1-yl)ethane (bte), 1,2-bis(imidazol-1-yl)ethane (bime) and 1,4-bis(1,2,4-triazol-1-yl)butane (btb), together with NCS⁻, dicyanamide (dca) and N₃⁻. The compound 1 contains two kinds of motifs (double chain and single chain) and forms a three-dimensional hydrogen bonded network; 2 and 3 contain one-dimensional triple chains; and 4 and 5 form two-dimensional (4, 4) networks. The coordination anions (NCS⁻, dca and N₃⁻) and the structural characteristics of the ligands (bte, bime and btb) play an important role in the assembly of the topologies. Magnetic studies reveal that 1-5 remain in the high-spin state over the whole temperature range 2-300 K and no detectable spin-crossover is observed.     

Ate complexes of Ge(II) and Sn(II) with bidentate ligands [LiE(OCH2CH2NMe2)3]2 (E=Ge, Sn): synthesis and structure

The reaction of equimolar quantities of LiOCH₂CH₂NMe₂ and E¹⁴(OCH₂CH₂NMe₂)₂ (E¹⁴=Ge, Sn) in ether yielded new ate complexes [LiE¹⁴(OCH₂CH₂NMe₂)₃]₂ (E¹⁴=Ge (1), Sn (2)) with bidentate ligands. The compounds 1 and 2 are white crystalline substances which are highly soluble in THF and pyridine and very sensitive to the traces of oxygen and moisture. The structures of these compounds are studied by X-ray diffraction analysis. The ate complexes 1 and 2 are powerful nucleophiles and may be employed as ligands (neutral) in the coordination chemistry of the transition metals. The electronegative O-substituents at the divalent E¹⁴ atoms render them less oxidizable than alkyl- or aryl-substituted derivatives, and the bidentate ligands, owing to intramolecular donor-acceptor interactions, make them more thermodynamically stable compared to monodentate ligands.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Synthesis and structural characterization of cobalt(II) and zinc(II) complexes with 2-(indazol-1-yl)-2-thiazoline (TnInA). X-ray characterization of [CoCl2(TnInA)2] · C2H6O and [(M)(TnInA)2(H2O)2](NO3)2 (M = Co, Zn)

Several complexes of 2-(indazol-1-yl)-2-thiazoline (TnInA) with the divalent ions Co and Zn have been synthesized by the direct combination of the ligand and the metal chloride or nitrate hydrated salts in ethanol. These complexes have been characterized by a variety of physical–chemical techniques. Moreover, the structures of [CoCl₂(TnInA)₂] · C₂H₆O (1) and [(M)(TnInA)₂(H₂O)₂](NO₃)₂ (M = Co, 3; Zn, 4) were determined by single-crystal X-ray diffraction. In all the complexes, the ligand TnInA bonds to the metal ion through the indazole and thiazoline nitrogen atoms. In complex 1 the environment around the cobalt ion may be described as a distorted octahedron with two TnInA ligands and two chlorine ligands. Compounds 3 and 4 are isostructural with a distorted octahedral geometry around the metal center, being linked to two water molecules and two TnInA ligands. However, in complex [ZnCl₂(TnInA)] (2) the zinc atom is four-coordinated with a probable tetrahedral environment with two chloro ligands and one TnInA ligand bonded to the metal ion.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

The coordination chemistry of thiazoline/thiazolidine derivatives. II: synthesis and characterization of [CoCl2(PyTT)] and [ZnCl2(PyTT)] [PyTT=2-(2-pyridyl)imino-N-(2-thiazolin-2-yl)thiazolidine]

The compounds dichloro[2-(2-pyridyl)imino-κN---N-(2-thiazolin-κN-2-yl)thiazolidine]cobalt(II) and dichloro[2-(2-pyridyl)imino-κN---N-(2-thiazolin-κN-2-yl)thiazolidine]zinc(II) have been isolated and characterized by single crystal X-ray diffraction and IR spectroscopy. Moreover, the cobalt(II) complex has been studied by means of magnetic susceptibility measurements and UV–Vis–NIR diffuse reflectance. Both complexes are isostructural. The environment around the cobalt(II) and zinc(II) atoms may be described as a distorted tetrahedral geometry with the metallic atoms coordinated to two chlorine atoms [Co---Cl(1)=2.241(1) Å; Co---Cl(2)=2.221(1) Å], [Zn---Cl(1)=2.235(1) Å; Zn---Cl(2)=2.211(1) Å], one thiazoline nitrogen [Co---N(1)=1.982(2) Å], [Zn---N(1)=2.021(2) Å] and one imino nitrogen [Co---N(3)=2.009(1) Å], [Zn---N(3)=2.056(2) Å].     

Chalcogen-capped ruthenium carbonyl clusters derived from diphosphazane mono- and dichalcogenides of the type X2P(E)N(R)PX2 and X2P(E)N(R)P(E)X2 (E = S or Se)

Reactions of Ru₃(CO)₁₂ with diphosphazane monoselenides Ph₂PN(R)P(Se)Ph₂ [R = (S)-∗CHMePh (L⁴), R = CHMe₂ (L⁵)] yield mainly the selenium bicapped tetraruthenium clusters [Ru₄(μ₄-Se)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] (1, 3). The selenium monocapped triruthenium cluster [Ru₃(μ₃-Se)(μ_sb-CO)(CO)₇{κ²-P,P-Ph₂PN((S)-∗CHMePh)PPh₂}] (2) is obtained only in the case of L⁴. An analogous reaction of the diphosphazane monosulfide (PhO)₂PN(Me)P(S)(OPh)₂ (L⁶) that bears a strong π-acceptor phosphorus shows a different reactivity pattern to yield the triruthenium clusters, [Ru₃(μ₃-S)(μ₃-CO)(CO)₇{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (9) (single sulfur transfer product) and [Ru₃(μ₃-S)₂(CO)₅{κ²-P,P-(PhO)₂PN(Me)P(OPh)₂}{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (10) (double sulfur transfer product). The reactions of diphosphazane dichalcogenides with Ru₃(CO)₁₂ yield the chalcogen bicapped tetraruthenium clusters [Ru₄(μ₄-E)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] [R = (S)-∗CHMePh, E = S (6); R = CHMe₂, E = S (7); R = CHMe₂, E = Se (3)]. Such a tetraruthenium cluster [Ru₄(μ₄-S)₂(μ- CO)(CO)₈{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (11) is also obtained in small quantities during crystallization of cluster 9. The dynamic behavior of cluster 10 in solution is probed by NMR studies. The structural data for clusters 7, 9, 10 and 11 are compared and discussed.     

Supramolecular chemistry of half-sandwich organometallic building blocks based on RuCl2(p-cymene)Ph2PCH2Y

A new series of neutral organometallic building blocks based on piano-stool ruthenium(II) complexes, RuCl₂(p-cymene)Ph₂PCH₂Y [Y = -NHC₆H₄(2-CO₂H) (2a), -NHC₆H₄(3-CO₂H) (2b), -NHC₆H₃(3-CO₂H)(6-OCH₃) (2c), -NHC₆H₄(4-CO₂H) (2d), -NHC₆H₃(2-CO₂H)(4-OH) (2e), -NHC₆H₃(3-OH)(4-CO₂H) (2f), -NHC₆H₃(2-CO₂H)(5-CO₂H) (2g) and -OH (2h)], were synthesised in high yields (>88%) from {RuCl₂(p-cymene)}₂ and the appropriate phosphines 1a-1h. The new tertiary phosphine 1b was prepared by Mannich condensation of NH₂C₆H₄(3-CO₂H) with Ph₂PCH₂OH in MeOH. Solution NMR (³¹P{¹H}, ¹H), FT-IR and microanalytical data are in full agreement with the proposed structures. Single crystal X-ray studies confirm that, in each case, compounds 2a, 2b and 2d-2h have piano-stool arrangements with typical Ru-P, Ru-Cl and Ru-C_centroid bond lengths. From our crystallographic studies, factors that influence the supramolecular assemblies of these ruthenium(II) complexes include: (i) the type of functional group present, (ii) the geometric disposition of the -N(H)CH₂PPh₂, -CO₂H and -OH groups around the central benzene scaffold, and (iii) the solvents used in the recrystallisations. Hence in isomers 2a and 2b, molecules are associated into head-to-tail dimer pairs through classical intermolecular O-H?O hydrogen bonding. This feature is also observed in isomer 2d but dimer pairs are further associated to give a 1-D chain through assisted intermolecular N-H?Cl hydrogen bonding. The additional 4-hydroxo group in 2e promotes a ladder arrangement via intermolecular O-H?O and O-H?Cl hydrogen bonding. In contrast the isomeric compound 2f does not show head-to-tail O-H?O hydrogen bonding but instead O-H?Cl and N-H?O intermolecular hydrogen bonding is observed. Depending on the choice of solvent (MeOH or DMSO), 2g forms extended networks based on chains (2g · DMSO · 1.5MeOH) or tapes (2g · 3MeOH). In 2h, a single intramolecular O-H?Cl hydrogen bond is observed for each independent molecule. The X-ray structure of one representative tertiary phosphine, 1f, has also been determined.     

Synthesis and structures of the dinuclear tin(II) complexes [R = Ph, X(Z) = CPh; R = SiMe3, X(Z) = PPh2] and of related compounds

Tin(II) compounds containing the ligands [CH(C₆H₃Me₂-2,5)C(Bu^t)NSiMe₃]⁻ (≡ L¹), [CH(Ph)C(Ph)NSiMe₃]⁻ (≡L²), [CH(SiMe₃)P(Ph)₂NSiMe₃]⁻ (≡ L³),

Full-size image (3K)

(≡ L⁴), [C(Ph)C(Ph)NSiMe₃]²⁻ (≡ L⁵), and [C(SiMe₃)P(Ph)₂NSiMe₃]²⁻ (≡ L⁶) are reported: the transient SnBr(L¹) (1) and SnBr(L²) (2), Sn(L¹)₂ (3) [P.B. Hitchcock, J. Hu, M.F. Lappert, M. Layh, J.R. Severn, J. Chem. Soc., Chem. Commun. (1997) 1189], the labile Sn(L²)₂ (4), [Sn(L⁵)]₂ (5), SnCl(L³) (6), Sn(L³)₂ (7), [Sn(L⁶)]₂ (8), Sn(L⁴)₂ (9) and Pb(L⁴)₂ (10). They were prepared from (i) SnBr₂ and K(L¹) (1, 3) or K(L²) (2, 4, 5); (ii) SnCl₂ and Li(L³) (6–9); or (iii) PbCl₂ and Li(L⁴) (10). Each of 1, 3 and 5–10 has been characterised by multinuclear NMR spectra; 3, 5, 6, 8, 9 and 10 by EI-mass spectra, but only 3, 5, 8, 9 and 10 were isolated pure and furnished X-ray quality crystals. Of greatest novelty are the title binuclear fused tricyclic ladder-like compounds 5 and 8. Quantum chemical calculations, on alternative pathways to 5 from 2 and to 8 from 7, are reported.     

Studies on the reactivity of cis-RuCl2 fragment in Ru(PPh3)2(TaiMe)Cl2 with N,N-chelators (TaiMe = 1-methyl-2-(p-tolylazo)imidazole). Spectral and electrochemical characterisation of the products

Dechlorination of Ru(PPh₃)₂(TaiMe)Cl₂ (TaiMe = p-Me-C₆H₄-N=N-C₃H₂NN(1)-Me (1), 1-methyl-2-(p-tolylazo)imidazole) has been carried out in acetone solution by Ag⁺ and reacted with N,N’-chelators to synthesise [Ru(PPh₃)₂ (TaiMe)(N,N’)]²⁺. The complexes have been isolated as their perchlorate salts. The N,N’ chelators are 1-alkyl-2-(phenylazo)imidazoles (PaiX, X = Me, Et, CH₂Ph); 2-(arylazo)pyridines, (Raap,p-R-C₆H₄-N=N-C₅H₄N; R = H, Me, Cl); 2-(arylazo)pyrimidines (Raapm,p-R-C₆H₄-N=N-C₃N₂H₂; R = H, Me, Cl); 2,2’-bipyridine (bpy) and 1,10-phenanthroline (o-phen). Unsymmetrical N,N’ chelators may give two isomers and this is indeed observed. The¹H NMR spectral data refer to the presence of two isomers in the mixture in different proportions. With consideration of coordination pairs in the order of PPh₃, PPh₃; N,N (N refers to N(immidazole)) and N’,N (N’ refers to N(azo)), the complexes have been characterised astrans-cis-cis andtrans-trans-trans configuration; the former predominates in the mixture. Electrochemical studies exhibit high potential Ru(III)/Ru(II) couple and quasireversible N=N reduction. Electronic spectra show high intensity (ε ∼ 10⁴) MLCT transition in the visible region (520 ±10) nm along with a shoulder (ε ∼ 10³) in the longer wavelength region.     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.