Discrete Rh(III)/Fe(II) and Rh(III)/Fe(II)/Co(III) cyanide-bridged mixed valence compounds

The heterotrinuclear complexes trans- and cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) are unprecedented examples of mixed valence complexes based on ferrocyanide bearing three different metal centers. These complexes have been assembled in a stepwise manner from their {trans-III-L(14S)Co(III)}, {cis-VI-L(15)Rh(III)}, and {Fe(II)(CN)(6)} building blocks. The preparative procedure follows that found for other known discrete assemblies of mixed valence dinuclear Cr(III)/Fe(II) and polynuclear Co(III)/Fe(II) complexes of the same family. A simple slow substitution process of [Fe(II)(CN)(6)](4-) on inert cis-VI-[Rh(III)L(15)(OH)](2+) leads to the preparation of the new dinuclear mixed valence complex [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) with a redox reactivity that parallels that found for dinuclear complexes from the same family. The combination of this dinuclear precursor with mononuclear trans-III-[Co(III)L(14S)Cl](2+) enables a redox-assisted substitution on the transient {L(14S)Co(II)} unit to form [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+). The structure of the final cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) complex has been established via X-ray diffraction and fully agrees with its solution spectroscopy and electrochemistry data. The new species [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) and [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) show the expected electronic spectra and electrochemical features typical of Class II mixed valence complexes. Interestingly, in the trinuclear complex, these features appear to be a simple addition of those for the Rh(III)/Fe(II) and Co(III)/Fe(II) moieties, despite the vast differences existent in the electronic spectra and electrochemical properties of the two isolated units.     

Electrode processes of the V(III)/V(II) and Eu(III)/Eu(II) systems in mixed water + acetone solvents

Rate constants of the electrode reaction V(III)+e⁻ → V(II) in water+acetone mixtures were determined. In the regions of irreversible and quasi-reversible behaviour we used polarographic and square-wave polarographic measurements, respectively. The values of the constant go through a minimum with increasing concentration of acetone. Following the published data for the Eu(III)/Eu(II) system (H. Elzanowska, Ph. D. Thesis, Warsaw, 1957), this behaviour was explained by the simultaneous reduction of differently solvated ions in the solution where, depending on the degree of electrode coverage, a partial resolvation at the electrode surface can occur. The calculated dependence of the rate constant on the solvent composition is in accord with experimental values.     

The electronic effect in supramolecular self-assembly of <Emphasis Type="Italic">para-</Emphasis>substituted tetraphenylporphyrinatozinc(II) with imidazolyl-linked porphyrinatomanganese(III) by coordinative bonding

The supramolecular self-assembly of para-substituted tetraphenylporphyrin complexes of zinc(II), Zn(p-X)TPP, with imidazolyl-linked porphyrinatomanganese(III), Mn(p-lmBPTPP)Cl, driven by coordinative bonding has been investigated by fluorescence spectra, electrospray mass spectrometry, ¹H-n.m.r. and u.v.–vis. spectra. The association constants of the supramolecular complexes, K_c, were calculated using fluorescence spectroscopic titration data at suitable dilute concentration ranges in which the fluorescent quenching of Zn(p-X)TPP by Mn(p-ImBPTPP)Cl is a static process. The electronic effect in the supramolecular self-assembly of para-substituted . porphyrinatozinc(II) with imidazolyl-linked porphyrinatomanganese(III) is discussed. The non-linear dependence of log K_c on the Hammett constants was found, which suggested that the electronic effect in para-substituents of tetraphenylporphyrin complexes of zinc(II) is an important, but not a sole factor effecting the association constants of the Zn(p-X)TPP–Mn(p-ImBPTPP)Cl supramolecular complexes. The results indicate that the closed conformation of the Zn(p-X)TPP–Mn(p-ImBPTPP)Cl supramolecular complex is another important factor effecting the association constants of the Zn(p-X)TPP–Mn(p-ImBPTPP)Cl supramolecular complexes.     

A novel fluorescein-porphyrinatozinc(II) hybrid: synthesis and its supramolecular self-assembly with imidazolyl-linked porphyrinatomanganese(III) by coordinative bonding

A novel fluorescein–porphyrinatozinc(II) hybrid, Zn(Fl–PPTPP), was synthesized and characterized by u.v.–vis., i.r., ¹H-n.m.r, ESMS and elemental analyses. The supramolecular self-assembly of Zn(Fl–PPTPP) with an imidazolyl-linked porphyrinatomanganese(III), Mn^(III)(p-ImBPTPP)Cl, complex has been studied by fluorescence spectroscopic titration, VPO measurements and ESMS, which indicates that the formation of the Zn(Fl–PPTPP)–Mn^(III)(p-ImBPTPP)Cl. supramolecular complex is driven by coordinative bonding formed by the coordination of imidazolyl group in Mn^(III)(p-ImBPTPP)Cl to Zn(II) in Zn(Fl–PPTPP). The association constant of the supramolecular complex was calculated from the fluorescence spectroscopic titration data. It was found that the conformation of the Zn(Fl–PPTPP)–Mn^(III)(p-ImBPTPP)Cl supramolecular complex, the steric hindrance and the electronic effect of the fluorescein group linked to porphyrin through a flexible long alkoxy chain are all acting on the association constant of the Zn(Fl–PPTPP)–Mn^(III)(p-ImBPTPP)Cl supramolecular complex. It seems that the steric hindrance and the electronic effect of the fluorescein group are the primary factors effecting the association constant of Zn(Fl–PPTPP)–Mn^(III)(p-ImBPTPP)Cl supramolecular complex, especially the electronic effect of the fluorescein group, which is the reason for the association constant of Zn(Fl–PPTPP)–Mn^(III)(p-ImBPTPP)Cl being smaller than that of ZnTPP–Mn^(III)(p-ImBPTPP)Cl.     

Water soluble molecular switches of fluorescence based on the Ni(III)/Ni(II) redox change

The water soluble Ni(II) complexes of the cyclam derivatives with 1,3-benzodioxole and 1,2,3-trimethoxybenzene display the fluorescent emission typical of the covalently linked fluorophores, which results from a charge transfer excited state. On oxidation to Ni(III), the fluorescence is completely quenched due to the occurrence of an electron transfer (eT) process from the excited fluorogenic fragment Fl to the oxidized metal. Thus, fluorescence can be switched off/on at will, for several cycles, by consecutively oxidizing and reducing the metal center, in controlled potential electrolysis experiments both in acetonitrile and in aqueous 0.1 M HClO4. Occurrence of an eT process from Fl to Ni(III) ultimately depends upon the easy oxidation of Fl to Fl+, whereas failure of the occurrence of an eT process from Ni(II) to Fl has to be ascribed to the particular resistance of Fl fragments to the reduction.     

Effect of specific adsorbed anions on the electrode kinetics of the V(III)/V(II) and Eu(III)/Eu(II) couples

Electrochemical kinetic parameters of the V(III)/V(II) and Eu(III)/Eu(II) couples in sulfuric, perchloric, hydrochloric, and hydrobromic acids were measured by potentiostatic and double pulse galvanostatic methods. The ₂ potentials in these solutions were calculated from electrocapillary measurements and the effect of the ₂ potentials on the electrode kinetics was discussed. The kinetic data after the Frumkin correction was applied show a very good agreement in H₂SO₄, HClO₄, and HCl solutions, if we assume that the non-complexed ion, which is partially supplied by the dissociation of complex ions, participates in the electrode reaction. The corrected rate constants in the bromide solution were about ten times larger than those to be expected from the ₂ potentials in the case of the V(III)/V(II) couple and a small acceleration effect was observed for the Eu(III)/Eu(II) couple. The greater reaction rate in the bromide solution is explained by the bridging effect.     

Cryptand derived fluorescence signaling systems for sensing Hg(II) ion: A comparative study

Two laterally non-symmetric aza-oxa cryptands have been derivatized with the electron-withdrawing fluorophore, 7-nitrobenz-2-oxa-1,3-diazole to obtain the corresponding mono-, bis- and tris-products. In each case, no appreciable emission is observed when the fluorophore is excited due to an efficient photoinduced intramolecular electron transfer (PET) from the lone pair on nitrogen present in the bridges. In the presence of a number of transition and heavy metal ions, their emission characteristics change. The electron-withdrawing ability of the fluorophore drastically alters the binding ability of the cryptand such that Hg(ii) affords largest enhancement of fluorescence. In contrast, mono-, bis- and tris-anthryl (electron-donating) derivatives of these cryptands do not exhibit any selectivity towards Hg(ii) and affords low fluorescence enhancement. Also, the difference in cavity dimension of the o-cryptand and m-cryptand plays a crucial role in terms of selectivity.     

Dinuclear Co(III)/Co(III) and Co(II)/Co(III) mixed-valent complexes: synthetic control of the cobalt oxidation level

The reactivity of cobalt(II) salts towards H(3)L (2-(2-hydroxyphenyl)-1,3-bis[4-(2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) was studied in different reaction conditions. Accordingly, the interaction of cobalt(II) acetate with H(3)L in methanol gives rise to the discrete complex [Co(III)(2)L(OAc)(2)(OMe)]*1.5H(2)O.MeOH, 1. Reaction of cobalt(II) acetylacetonate with H(3)L in the presence of dicarboxylic acids was also investigated. Thus, when cobalt(II) acetylacetonate and H(3)L are mixed with terephthalic or malonic acid in 4 : 2 : 1 molar ratios, the mixed valent [Co(II/III)(2)L(acac)(p-O(2)CC(6)H(4)CO(2)H)][Co(II/III)(2)L(acac)(OH)]*2H(2)O*2MeOH, 2 and [Co(II/III)(2)L(acac)(O(2)CCH(2)CO(2)H)][Co(II/III)(2)L(acac)(OH)]*7H(2)O, complexes are isolated. Decreasing the pH of the medium, by addition of a second mol of dicarboxylic acid, leads to [Co(II/III)(2)L(O(2)CCH(2)CO(2))(MeOH)]*2MeOH, 4, while the reaction with terephthalic acid does not proceed. 1, 2 and 4 were crystallographically characterised and all the complexes are dinuclear, with hydrogen bonds that expand the initial nodes. The magnetic characterisation, as well as the NMR spectroscopy, indicates a diamagnetic nature for 1, in agreement with the presence of Co(III), showing the aerial oxidation suffered by the cobalt(II) ions. Nevertheless, are paramagnetic. Temperature variable magnetic measurements were recorded for the crystallographically characterised complexes 2 and 4 and these studies confirm the mixed valence Co(II)/Co(III) nature of the compounds. The best fits of the magnetic data give an axial distortion parameter Delta = 628.7 cm(-1) for 2 and 698.8 cm(-1) for 4, and spin-orbit coupling constant lambda = -117.8 cm(-1) for 2 and -107.0 cm(-1) for 4. Therefore, this study shows that the oxidation degree of the initial cobalt(ii) salt by atmospheric oxygen can be controlled according to the pH of the medium.     

Identification of Cu(II)/Cu(III) couples in binuclear copper(II) complexes

A new series of binuclear copper(II) complexes were synthesised and studied by magnetic, spectral, ESR and cyclic voltammetry methods. The μ_eff values per copper atom correspond to the values observed for mononuclear copper(II) complexes. ESR spectral data in solution indicate weak interactions resulting from the electron delocalisation through the ligand system. Two nearly reversible red-ox couples are identified at $\text{+}\text{?}$0.50 V and $\text{+}\text{?}$0.75 V vs SCE. They correspond to Cu(II)αCu(III) red-ox processes, successively occurring at the two copper sites in the binuclear complexes.     

Artificial amino acids in nickel(II) and nickel(II)/lanthanide(III) chemistry

The synthesis and magnetic properties of five new homo- and heterometallic nickel(II) complexes containing artificial amino acids are reported: [Ni(4)(aib)(3)(aibH)(3)(NO(3))](NO(3))(4)·3.05MeOH (1·3.05MeOH), [Ni(6)La(aib)(12)](NO(3))(3)·5.5H(2)O (2·5.5H(2)O), [Ni(6)Pr(aib)(12)](NO(3))(3)·5.5H(2)O (3·5.5H(2)O), [Ni(5)(OH)(2)(l-aba)(4)(OAc)(4)]·0.4EtOH·0.3H(2)O 6(4·0.4EtOH·0.3H(2)O), and [Ni(6)La(l-aba)(12)][La(2)(NO(3))(9)] (5; aibH = 2-aminoisobutyric acid; l-abaH = l-2-aminobutyric acid). Complexes 1 and 4 describe trigonal-pyramidal and square-based pyramidal metallic clusters, respectively, while complexes 2, 3, and 5 can be considered to be metallocryptand-encapsulated lanthanides. Complexes 4 and 5 are chiral and crystallize in the space groups I222 and P2(1)3, respectively. Direct-current magnetic susceptibility studies in the 2-300 K range for all complexes reveal the presence of dominant antiferromagnetic exchange interactions, leading to small or diamagnetic ground states.     

Electrochemical Behavior of Iron(III)/Iron(II) Couple in Dimethylformamide

The electrochemical behavior of the iron(III)/iron(II) couple was investigated in both complexing (Cl⁻) and noncomplexing (ClO⁻₄) media in dimethylformamide (DMF), and the results were compared with the results obtained in aqueous solutions. The diffusion coefficients for iron(III) and iron(II) in DMF are larger in complexing medium than in noncomplexing medium, contrary to the results obtained in aqueous solutions. The heterogeneous electron transfer rate constants for the iron(III)/iron(II) couple obtained in DMF were found to be smaller in DMF solution as a result of the specific adsorption of DMF. The formal potential of the Fe(III)/Fe(II) couple in DMF is about 0.2 V less positive in noncomplexing medium as a result of the greater stabilization of iron(III) by the strongly cation-solvating DMF. The formal potential of the same couple in complexing medium (Cl⁻) was found to be 0.5 V less positive due to a combination of solvation and complexation effects. Cyclic voltammetric investigations show a quasi-reversible electron transfer without any coupled chemical reaction.     

A cyclic voltammetric study of iron(II)/ruthenium(II) complexes with bis(tertiary phosphines)

Summary Nine complexes of Fe^IIRu^II with bis(tertiary phosphines), namely, 1,2-bis(diphenylphosphino)ethane (dppe), 1,2-bis (diphenylphosphino)ethylene (dppen) and o-phenylenebis (diphenylphosphine) (o-diphos) were studied using cyclic voltammetry. The half-wave potentials for the complexes studied are: (1) [FeCl₂(dppe)], 0.050V; (2) [Fe(NCS)₂(dppe)₂], 0.265V; (3) [RuCl₂(dppe)₂], 0.548V; (4) [FeCl₂(dppen)₂], 0.225V; (5) [Fe(NCS)₂-(dppen)₂], 0.290V; (6) [RuCl₂(dppen)₂], 0.690V; (7) [FeCl₂(o-diphos)₂] 0.160V; (8) [Fe(NCS)₂(o-diphos)₂] 0.582V; and (9) [RuCl₂(o-diphos)₂], 0.265V. The redox potentials are related to the nature of the ligand, the nature of the metal, the stereochemistry of the complex and the ligand field strength.     

Real and Hypothetical Intermediate-Valence Ag(II)/Ag(III) and Ag(II)/Ag(I) Fluoride Systems as Potential Superconductors

With the aim of gauging their potential as conducting or superconducting materials, we examine the crystal structures and magnetic properties of the roughly one hundred binary, ternary, and quaternary Ag(II) and Ag(III) fluorides in the solid state reported up to date. The Ag(II) cation appears in these species usually in a distorted octahedral environment, either in an [AgF](+) infinite chain or as [AgF(2)] sheets. Sometimes one finds discrete square-planar [AgF(4)](2-) ions. The Ag(III) cation occurs usually in the form of isolated square-planar [AgF(4)](-) ions. Systems containing Ag(III) (d(8)) centers are typically diamagnetic. On the other hand, the rich spectrum of Ag(II) (d(9)) environments in binary and ternary fluorides leads to most diverse magnetic properties, ranging from paramagnetism, through temperature-independent paramagnetism (characteristic for half-filled band and metallic behavior) and antiferromagnetism, to weak ferromagnetism. Ag(II) and Ag(III) have the same d-electron count as Cu(II) (d(9)) and Cu(III) (d(8)), respectively. F(-) and O(2-) ions are isoelectronic, closed-shell (s(2)p(6)) species; both are weak-field ligands. Led by these similarities, and by some experimental evidence, we examine analogies between the superconducting cuprates (Cu(II)/Cu(III)-O(2-) and Cu(II)/Cu(I)-O(2-) systems) and the formally mixed-valence Ag(II)/Ag(III)-F(-) and Ag(II)/Ag(I)-F(-) phases. For this purpose we perform electronic-structure computations for a number of structurally characterized binary and ternary Ag(I), Ag(II), and Ag(III) fluorides and compare the results with similar calculations for oxocuprate superconductors. Electronic levels in the vicinity of the Fermi level (x(2)-y(2) or z(2)) have usually strongly mixed Ag(d)/F(p) character and are Ag-F antibonding, thus providing the potential of efficient vibronic coupling (typical for d(9) systems with substantially covalent bonds). According to our computations this is the result not only of a coincidence in orbital energies; surprisingly the Ag-F bonding is substantially covalent in Ag(II) and Ag(III) fluorides. The electron density of state at the Fermi level (DOS(F)) for silver fluoride materials and frequencies of the metal-ligand stretching modes have values close to those for copper oxides. The above features suggest that properly hole- or electron-doped Ag(II) fluorides might be good BCS-type superconductors. We analyze a comproportionation/disproportionation equilibrium in the hole-doped Ag(II) fluorides, and the possible appearance of holes in the F(p) band. It seems that there is a chance of generating an Ag(III)-F(-)/Ag(II)-F(0) "ionic/covalent" curve crossing in the hole-doped Ag(II)-F(-) fluorides, significantly increasing vibronic coupling.     

First-principles study of the separation of Am(III)/Cm(III) from Eu(III) with Cyanex301

The experimentally observed extraction complexes of trivalent lanthanide Eu(III) and actinide Am(III)/Cm(III) cations with purified Cyanex301 [bis(2,4,4-trimethylpentyl)dithiophosphinic acid, HBTMPDTP denoted as HL], i.e., ML(3) (M = Eu, Am, Cm) as well as the postulated complexes HAmL(4) and HEuL(4)(H(2)O) have been studied by using energy-consistent 4f- and 5f-in-core pseudopotentials for trivalent f elements, combined with density functional theory and second-order M?ller-Plesset perturbation theory. Special attention was paid to explaining the high selectivity of Cyanex301 for Am(III)/Cm(III) over Eu(III). It is shown that the neutral complexes ML(3), where L acts as a bidentate ligand and the metal cation is coordinated by six S atoms, are most likely the most stable extraction complexes. The calculated metal-sulfur bond distances for ML(3) do reflect the cation employed; i.e., the larger the cation, the longer the metal-sulfur bond distances. The calculated M-S and M-P bond lengths agree very well with the available experimental data. The obtained changes of the Gibbs free energies in the extraction reactions M(3+) + 3HL → ML(3) + 3H(+) agree with the thermodynamical priority for Am(3+) and Cm(3+). Moreover, the ionic metal-ligand dissociation energies of the extraction complexes ML(3) show that, although EuL(3) is the most stable complex in the gas phase, it is the least stable in aqueous solution.     

Two-color luminescence from a tetranuclear Ir(III)/Ru(II) complex

A new tetranuclear compound containing Ru(II) and Ir(III) polypyridine subunits exhibits two independent emissions at room temperature, as a consequence of weak interchromophoric coupling; in contrast, at 77 K energy transfer from Ir-based chromophores to the Ru-based ones is quantitative.     

Unusual multi-step sequential Au(III)/Au(II) processes of gold(III) quinoxalinoporphyrins in acidic non-aqueous media

The electrochemistry of gold(III) mono- and bis-quinoxalinoporphyrins was examined in CH(2)Cl(2) or PhCN containing 0.1 M tetra-n-butylammonium perchlorate (TBAP) before and after the addition of trifluoroacetic acid to solution. The investigated porphyrins are represented as Au(PQ)PF(6) and Au(QPQ)PF(6), where P is the dianion of the 5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrin and Q is a quinoxaline group fused to a β,β'-pyrrolic position of the porphyrin macrocycle; in Au(QPQ)PF(6) there is a linear arrangement where the quinoxalines are fused to pyrrolic positions that are opposite each other. The porphyrin without the fused quinoxaline groups, Au(P)PF(6), was also investigated under the same solution conditions. In the absence of acid, all three gold(III) porphyrins undergo a single reversible Au(III)/Au(II) process leading to the formation of a Au(II) porphyrin which can be further reduced at more negative potentials to give stepwise the Au(II) porphyrin π-anion radical and dianion, respectively. However, in the presence of acid, the initial Au(III)/Au(II) processes of Au(PQ)PF(6) and Au(QPQ)PF(6) are followed by an internal electron transfer and protonation to regenerate new Au(III) porphyrins assigned as Au(III)(PQH)(+) and Au(III)(QPQH)(+). Both protonated gold(III) quinoxalinoporphyrins then undergo a second Au(III)/Au(II) process at more negative potentials. The electrogenerated monoprotonated monoquinoxalinoporphyrin, Au(II)(PQH), is then further reduced to its π-anion radical and dianion forms, but this is not the case for the monoprotonated bis-quinoxalinoporphyrin, Au(II)(QPQH), which accepts a second proton and is rapidly converted to Au(III)(HQPQH)(+) before undergoing a third Au(III)/Au(II) process to produce Au(II)(HQPQH) as a final product. Thus, Au(P)PF(6) undergoes one metal-centered reduction while Au(PQ)PF(6) and Au(QPQ)PF(6) exhibit two and three Au(III)/Au(II) processes, respectively. These unusual multistep sequential Au(III)/Au(II) processes were monitored by thin-layer spectroelectrochemistry and a reduction/oxidation mechanism for Au(PQ)PF(6) and Au(QPQ)PF(6) in acidic media is proposed.     

Cyclic voltammetric study of the redox behavior of Fe(II)/Fe(III) systems forming during the oxidation of Fe(II) complexes with saccharin and with saccharin and 1,10-phenanthroline

The electrochemical redox behavior of Fe(II)/Fe(III) systems formed during the oxidation of complexes [Fe(C₇H₄NO₃S)₂(H₂O)₄] · 2H₂O (Fe-sac) and [Fe(C₇H₄NO₃S)₂(C₁₂H₈N₂] · 2H₂O (Fe-sac-phen) have been investigated using cyclic voltammetry in the aqueous medium. In the CVs one pair of well-defined cathodic and anodic peaks appear for the transfer of single electron in the Fe-sac complex. The peak potentials are much wider separated as compared with the free (uncoordinated) Fe(II)/Fe(III) system. The ΔE values demonstrate that the electrode process is irreversible. In the presence of secondary ligand, 1,10-phenanthroline (Fe-sac-phen complex), the redox behavior of iron complexes is quasireversible. The effect of pH on the redox behavior of iron system is studied in acetate buffer. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 12, pp. 1504–1509. The text was submitted by author in English     

Ratiometric fluorescence chemosensors for copper(II) and mercury(II) based on FRET systems

A system based on FRET mechanism, comprising a coumarin donor and a rhodamine acceptor, was developed for the selective and quantitative detection of metal ions. Fluorescent chemosensors RCs, linked by 1,2-diethylamine, exhibit significant fluorescence enhancement and excellent selectivity toward Cu²⁺. Fluorescent probes CRB and CR6G, linked by hydrazide, function as ratiometric receptors for Cu²⁺ chromogentically and fluorogentically in organic-aqueous media. Furthermore, the characteristic rhodamine-based fluorescence response of CRB (excitation at 550 nm) exhibits high selectivity for Hg(II). The construction of this kind of universal FRET system opens a broader prospect for future design of ratiometric fluorescent probes.