Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

Multifunctional nanocomposites constructed from Fe3O4-Au nanoparticle cores and a porous silica shell in the solution phase

This work is directed towards the synthesis of multifunctional nanoparticles composed of Fe(3)O(4)-Au nanocomposite cores and a porous silica shell (Fe(3)O(4)-Au/pSiO(2)), aimed at ensuring the stability, magnetic, and optical properties of magnetic-gold nanocomposite simultaneously. The prepared Fe(3)O(4)-Au/pSiO(2) core/shell nanoparticles are characterized by means of TEM, N(2) adsorption-desorption isotherms, FTIR, XRD, UV-vis, and VSM. Meanwhile, as an example of the applications, catalytic activity of the porous silica shell-encapsulated Fe(3)O(4)-Au nanoparticles is investigated by choosing a model reaction, reduction of o-nitroaniline to benzenediamine by NaBH(4). Due to the existence of porous silica shells, the reaction with Fe(3)O(4)-Au/pSiO(2) core/shell nanoparticles as a catalyst follows second-order kinetics with the rate constant (k) of about 0.0165 l mol(-1) s(-1), remarkably different from the first-order kinetics with the k of about 0.002 s(-1) for the reduction reaction with the core Fe(3)O(4)-Au nanoparticles as a catalyst.     

聚乙烯吡咯烷酮/四氧化三铁复合纳米纤维的制备与表征

采用静电纺丝方法制备了聚乙烯吡咯烷酮/四氧化三铁复合纳米纤维, 并用透射电子显微镜(TEM)、X射线衍射(XRD)、热失重分析(TGA)和振动磁力分析进行了表征, 探讨了复合物的结构及其性能.     

Magnetite nanoparticles with tunable gold or silver shell

Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.     

Co~(2+)/Dy~(3+)掺杂纳米立方Fe_3O_4的热还原制备及磁靶向滞留性能

采用热还原沉淀法制备了一系列Co~(2+)/Dy~(3+)掺杂的纳米立方MxFe3-xO4磁性颗粒.利用X射线衍射仪、透射电子显微镜和振动样品磁强计研究了不同含量掺杂离子对MxFe3-xO4晶体结构、形貌及磁性的影响.研究发现,掺杂未改变母体的对称性,但母体形貌逐渐从立方体向球体过渡;Co~(2+)和Dy~(3+)的掺杂对于铁氧体磁学性质的影响明显不同,当Co~(2+)实际掺杂量为0.44和Dy~(3+)实际掺杂量为0.05时,MxFe3-xO4立方磁性粒子的饱和磁化强度(Ms)达到最大值,分别为76.65和70.21 A·m2·kg-1.与超顺磁性Fe_3O_4球体相比,高磁性掺杂Fe_3O_4立方体在体外模拟磁流体磁靶向定位实验中显示出较高的滞留率.     

Synthesis and characterization of bracelet-like magnetic nanorings consisting of Ag-Fe3O4 bi-component nanoparticles

Stable bracelet-like magnetic nanorings, formed by Ag-Fe(3)O(4) nanoparticles with an average size around 40 nm, have been successfully prepared in large scale by means of reducing Ag(+) and Fe(3+) simultaneously under mild conditions. In the reaction, tiny grains of silver are used as seeds to prompt small Fe(3)O(4) nanoparticles to grow larger, which is essential to enhance the magnetic dipole-dipole interactions, while only superparamagnetic Fe(3)O(4) nanoparticles (about 10 nm in size) can be obtained in the absence of Ag seeds. The XRD, TEM, SAED and the EDS line scan data reveal that these nanoparticles are in the core-shell structure. These magnetic Ag-Fe(3)O(4) nanoparticles assembled into nanorings by magnetic dipole-dipole interactions with a diameter of 100-200 nm. The saturation magnetization of the nanorings is 39.5 emu g(-1) at room temperature. The MRI images indicate that these kind of nanorings have the potential application in diagnostics as a T(2) MRI contrast agent.     

用于体外基因转染的氨基硅烷Fe3O4复合纳米粒子的合成及表征

利用2-吡咯烷酮和乙酰丙酮铁为原料制备Fe3O4磁性纳米颗粒, 用XRD和TEM对样品进行了表征. 选择偶联剂γ-氨丙基三乙氧基硅烷[NH2C3H6Si(OC2H5)3]对纳米粒子进行表面修饰, 制得APTTS/Fe3O4复合载体材料. 以此复合粒子作为传递载体, 将CD基因转染U251胶质瘤细胞. 采用RT-PCR, Western blot及免疫荧光等方法检测CD基因的表达及功能. 结果表明, 制备的Fe3O4颗粒粒径为8~10 nm, 结晶度较高; 经表面修饰后, 粒子表面负载—OH, —NH, —NH2, —C—O和—C—OH等多种功能基团. DNA结合分析及DNase-I消化结果表明, APTTS/Fe3O4粒子能够有效地结合和保护DNA. 体外细胞转染实验证实, 该复合纳米颗粒能够高效地传递CD基因进入U251胶质瘤细胞内, 并进行稳定表达.     

γ-Fe2O3纳米粒子的(湿)固相研磨法制备研究

在聚乙二醇(PEG-400)存在下,于室温下研磨适量FeCl3与NaOH的混合物制备了γ-Fe2O3纳米粒子.所得各样品用XRD,Mossbauer谱,TEM,Tg-DTA和FTIR等手段进行了表征.结果表明,研磨后的样品经60℃干燥2h后即可得结晶较差的γ-Fe2O3纳米粉体,经450℃热处理1h后得粒径约为30nm结晶较好的γ-Fe2O3纳米粒子,经500℃热处理1h后得到粒径约为40nm、结晶完好的γ-Fe2O3纳米粒子.     

Pd/Fe3O4-MCNT磁性催化剂的制备、表征及催化性能

利用多元醇法制备了单分散Fe₃O₄纳米粒子修饰多壁碳纳米管(MCNT)的磁性复合材料, 并以X射线衍射(XRD)、透射电镜(TEM)和X射线能量色散谱(EDS)对碳纳米管磁性复合材料的结构和组成进行了表征. 研究发现, 通过调控Fe₃O₄前驱体与MCNT载体的质量比, 可以很好地控制沉积的磁性纳米粒子大小. 以碳纳米管磁性复合材料为载体, 采用多元醇法成功制备了Pd负载量为3.0% (w)的Pd/Fe₃O₄-MCNT磁性催化剂. 磁性质测试表明碳纳米管磁性复合材料在负载Pd前后都具有良好的超顺磁性. 以肉桂醛加氢为探针反应研究了Pd/Fe₃O₄-MCNT的催化性能, 结果表明该催化剂表现出良好的催化加氢性能, 在外加磁场下催化剂能与液相反应体系高效分离, 循环使用4次后, 催化性能没有明显下降, 显示了良好的循环利用性能.     

核壳结构Ni0.5Zn0.5Fe2O4/PANI复合纳米材料的制备及表征

采用微乳液法制备出Ni0.5Zn0.5 Fe2O4纳米颗粒以及Ni0.5Zn0.5Fe2O4/PANI核壳结构复合纳米材料,借助FT-IR、XRD、SEM、TEM、VSM等分析手段研究了材料的形貌、结构与磁性能.结果表明:得到的Ni0.5Zn0.5Fe2O4纳米颗粒平均粒径为20hm左右,Ni0.5Zn0.5 Fe2O...     

磁场诱导沉淀聚合制备一维Fe3O4/P（MAA-DVB）纳米链

采用溶剂热法制备了单分散Fe3O4纳米粒子,以甲基丙烯酸（MAA）和二乙烯基苯（DVB）为聚合单体,在沉淀聚合过程中通过磁场诱导自组装制备了一维高磁响应性永久连接的Fe3O4/P（MAA-DVB）纳米链.采用扫描电镜（SEM）,透射电镜（TEM）,X射线衍射仪（XRD）,热重分析（TGA）及振动样品磁强计（VSM）等对其形貌、磁含量和磁响应性等进行了分析表征.结果表明,该法制备的一维Fe3O4/P（MAA-DVB）纳米链的磁含量为91%时,其比饱和磁化强度为72emu/g.在外磁场存在条件下,一维Fe3O4/P（MAA-DVB）纳米链将按外界磁场的方向取向.此外,每个豆荚内的Fe3O4纳米粒子规则的排列在一条线上,并通过P（MAA-DVB）聚合物使其均匀分布.     

新型Fe3O4纳米颗粒修饰玻碳电极对头孢噻肟钠的电催化还原及其测定

采用滴涂法将Fe3O4磁性纳米颗粒修饰在玻碳电极上,制得新型纳米Fe3O4修饰电极(Fe3O4-np/GC 电极).X射线衍射光谱表明,纳米Fe3O4为面心立方尖晶石结构,透射电子显微镜表明,纳米Fe3O4粒径15～20 nm的微球结构.采用扫描电子显微镜和交流阻抗法(EIS)对修饰电极表面进行了表征,发现纳米Fe3O4在电极表面形成了均匀的修饰膜.采用循环伏安法(CV)、微分脉冲伏安法(DPV)研究了头孢噻肟钠(CS)在修饰电极上的电化学行为及动力学性质,结果表明,CS在Fe3O4-np/GC电极上有敏锐的催化还原峰,且CS的还原峰电流与其浓度在7.0×10-8～1 ×10-6和1 ×10-6～4.5×10-5 mol/L范围内呈线性关系;检出限达到5.0×10-8 mol/L.该方法可用于市售头孢噻肟钠针剂中CS含量的测定,加标回收率达到96.6％～102.7％.     

原子转移自由基聚合与“Click”反应相结合制备Fe3O4@SiO2-g-PDMAEMA及其性质研究

结合原子转移自由基聚合（ATRP）与点击反应（＂Click＂reaction）,在SiO2包裹的Fe3O4磁性纳米粒子（Fe3O4@SiO2）表面接枝聚[甲基丙烯酸-2-（N,N-二甲氨基）乙酯]（PDMAEMA）,得到了表面接枝PDMAEMA的磁性纳米粒子（Fe3O4@SiO2-g-PDMAEMA）.通过1H NMR...     

磁性Fe_3O_4-聚吡咯纳米微球的合成与表征

报道了具有核壳结构的Fe3O4 聚吡咯磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度为 2 3 4emu g ,矫顽力为 45 2Oe的磁性微球 .微球的导电性随着微球中Fe3O4含量的增加而下降 .微球的磁性能则随着Fe3O4含量的增加而增大 .Fe3O4磁流体的粒径和磁性聚吡咯微球的粒径均在纳米量级 .纳米Fe3O4粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚吡咯之间存在着一定的相互作用 ,正是这种相互作用使磁性聚吡咯纳米微球的热稳定性提高 .     

Highly ordered self-assembly with large area of Fe3O4 nanoparticles and the magnetic properties

Monodisperse Fe3O4 nanoparticles (NPs) with narrow size distribution are synthesized by a high-temperature solution-phase method. The diameter of the as-synthesized NPs is tuned from 2 to 14 nm by varying the reaction conditions. Highly ordered superlattice structures of the Fe3O4 NPs with areas extending over 0.8 microm x 0.7 microm have been successfully obtained. The magnetic properties are investigated in their different states, such as in the solid state and diluted in wax with different concentrations. Some magnetic properties enhanced by increasing interparticle distances, such as the remanent magnetization and coercive field at low temperature, were noticed. Furthermore, we also observed that the saturation magnetization changed with temperature as expected. The preliminary explanation for the properties mentioned above is proposed.     

羧甲基葡聚糖磁性纳米微球的制备及表征

采用超声预处理技术,在羧甲基葡聚糖-水分散体系中,通过化学共沉淀法制备羧甲基葡聚糖磁性复合微球．采用IR,TEM,AFM,XRD和振动样品磁强计方法对产物进行了表征．实验结果表明：超声预处理方法能明显提高复合微球的分散性．制得的复合微球呈球形,分散均匀,平均粒径为100nm．它们具有超顺磁性,室温下磁性饱和磁化强度为35emu·g^-1．     

基于表面修饰聚丙烯酸合成超顺磁/荧光纳米复合粒子

在聚丙烯酸修饰的Fe₃O₄纳米粒子表面共价结合罗丹明B, 获得分散性和荧光信号均得到改善的超顺磁/荧光复合纳米材料. 分别用透射电子显微镜(TEM)、傅里叶变换红外光谱仪(FTIR)、热重分析仪、荧光光谱仪、X射线衍射仪(XRD) 和振动样品磁强计(VSM) 对合成的粒子进行了表征. 结果表明, 羧基化的Fe₃O₄纳米粒子和Fe₃O₄-荧光纳米复合材料的粒径基本相同, 为6～10 nm. Fe₃O₄-荧光纳米复合材料的饱和磁化强度为39.2 A•m²/kg, 室温下呈现超顺磁性, 具有较强的荧光信号.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).