Ruthenium-catalyzed [2 + 2] cycloadditions between 7-substituted norbornadienes and alkynes: an experimental and theoretical study

The ruthenium-catalyzed [2 + 2] cycloadditions of 7-substituted norbornadienes with an alkyne have been investigated. The cycloadditions were found to be highly regio- and stereoselective, giving only the anti-exo cycloadducts as the single regio- and stereoisomers in good yields. The results on the relative rate of different 7-substituted norbornadienes in the Ru-catalyzed [2 + 2] cycloadditions with an alkyne indicated that the reactivity of the alkene component decreases dramatically as the alkene becomes more electron deficient. Ab initio computational studies on the ruthenium-catalyzed [2 + 2] cycloadditions provided important information about the geometries and the arrangements of the four different groups on the Ru in the initial Ru-alkene-alkyne pi-complex, 14, and in the metallacyclopentene 15. Based on our computational studies, we also found that the first carbon-carbon bond formed in the [2 + 2] cycloaddition is between the C(5) of the alkene and the C(b) (the acetylenic carbon attached to the ester group) of the alkyne 8. Our computational studies on the potential energy profiles of the cycloadditions showed that the activation energy relative to the reactants for the oxidative addition step is in the range of 9.3-9.8 kcal/mol. The activation energy relative to the metallacyclopentene for the reductive elimination step is much higher than for the oxidative addition step (in the range of 25.9-27.6 kcal/mol).     

Study on the reactivity of oxabicyclic alkenes in ruthenium-catalyzed [2+2] cycloadditions

The ruthenium-catalyzed [2+2] cycloadditions of various bicyclic alkenes with an alkyne have been investigated. The presence of the oxygen in the bridgehead of the bicyclic alkene significantly enhanced the rate of the ruthenium-catalyzed [2+2] cycloadditions. The presence of a C1-substituent on the oxanorbornadiene decreased the rate of the cycloaddition and electron-withdrawing C1-substituents were found to be more reactive than electron-donating C1-substituents in the Ru-catalyzed [2+2] cycloaddition. The nature of the substituent on the benzene ring of oxabenzonorbornadienes showed little effect on the rate of the cycloaddition.     

Ruthenium-catalyzed [2 + 2] cycloadditions between bicyclic alkenes and alkynyl halides

Ru-catalyzed [2 + 2] cycloadditions between norbornadiene and alkynyl halides were found to occur in moderate to good yields (32-89%). The presence of the halide moiety greatly enhances the reactivity of the alkyne component in the cycloaddition and can be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition. [reaction: see text]     

Ruthenium-catalyzed [2 + 2] cycloadditions of 2-substituted norbornenes

The studies of remote substituent effects in controlling regio- and stereoselectivities in chemical reactions provide important information in understanding long-range stereoelectronic effects. The effect of remote substituents on ruthenium-catalyzed [2 + 2] cycloadditions of 2-substituted norbornenes has been investigated. The cycloadditions occurred at room temperature in excellent yields, and regioselectivities of 1.2:1 to 7.5:1 were observed with various 2-substituted norbornenes.     

Rhodium-catalyzed 1,3-acyloxy migration and subsequent intramolecular [4+2] cycloaddition of vinylallene and unactivated alkyne

A Rh-catalyzed 1,3-acyloxy migration of propargyl ester followed by intramolecular [4+2] cycloaddition of vinylallene and unactivated alkyne was developed. This tandem reaction provides access to bicyclic compounds containing a highly functionalized isotoluene or cyclohexenone structural motif, while only aromatic compounds were observed in related transition metal-catalyzed cycloadditions.     

Ruthenium-catalyzed [2 + 2] cycloadditions of ynamides

Ruthenium-catalyzed [2 + 2] cycloadditions between norbornene and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions, giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). [reaction: see text]     

Density functional theory study of the mechanisms and stereochemistry of the rh(i)-catalyzed intramolecular [3+2] cycloadditions of 1-ene- and 1-yne-vinylcyclopropanes

The mechanisms, structures of all stationary points involved, and kinetic and thermodynamic parameters of the Rh(I)-catalyzed intramolecular [3+2] cycloaddition reactions of 1-ene- and 1-yne-vinylcyclopropanes (1-ene-VCPs and 1-yne-VCPs) have been investigated using density functional theory (DFT) calculations. The computational results showed that the [3+2] reactions of 1-ene/yne-VCPs studied here occur through a catalytic cycle of substrate-catalyst complex formation, cyclopropane cleavage, alkene/alkyne insertion, and reductive elimination. Alkene/alkyne insertion is the rate- and stereoselectivity-determining step of these multistep [3+2] cycloadditions. The experimentally observed high reactivity of 1-yne-VCPs compared to 1-ene-VCPs is well rationalized by the differences of steric effects in the alkyne/alkene insertion transition states. DFT calculations unveiled that the relative orientation of the tethers in the 1-ene/yne-VCPs plays a key role in controlling the stereochemistry of the [3+2] cycloadducts. In addition, DFT calculation results are used to explain why, in some cases, the formation of the β-hydride elimination byproduct can compete with the [3+2] pathway.     

Chain-growth cycloaddition polymerization via a catalytic alkyne [2 + 2 + 2] cyclotrimerization reaction and its application to one-shot spontaneous block copolymerization

A cobalt-catalyzed alkyne [2 + 2 + 2] cycloaddition reaction has been applied to polymerizations yielding linear polymers via selective cross-cyclotrimerization of yne-diyne monomers, which occurs in a chain-growth manner. Additionally, through control of the alkyne reactivity of the two monomers, this method was efficiently applied to the spontaneous block copolymerization of their mixture. Here we present the proposed mechanism of the catalyst transfer process of this cycloaddition polymerization.     

Ruthenium-catalyzed [2+2] cycloadditions of bicyclic alkenes and ynamides

Ruthenium-catalyzed [2+2] cycloadditions between bicyclic alkenes and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). Diastereoselective cycloaddition utilizing chiral cyclic ynamides were also examined and a low to moderate level of asymmetric induction was observed.     

Recent advances in enantioselective [2 + 2 + 2] cycloaddition

Enantioselective cycloaddition using chiral transition metal catalysts is an atom-economical and efficient synthetic tool for the construction of chiral carbo- and heterocyclic skeletons. This short account discloses our recent results of inter- and intramolecular enantioselective [2 + 2 + 2] cycloadditions of alkyne and/or alkene moiety(ies). Chiral iridium complexes catalyzed the alkyne trimerization for the generation of axial chirality(ies), and chiral rhodium ones catalyzed alkyne-alkyne-alkene cyclization for the generation of a quaternary carbon including spirocyclic system.     

Target cum flexibility: an alkyne [2+2+2]-cyclotrimerization strategy for synthesis of trinem library

A rapid access to the central 4,5,6-tricyclic core of 4,5,6-trinems has been achieved by employing the alkyne [2+2+2]-cyclotrimerization as the key and final reaction in the synthesis.     

Remote substituent effects in ruthenium-catalyzed [2+2] cycloadditions: an experimental and theoretical study

The effects of a remote substituent on the regioselectivity of ruthenium-catalyzed [2+2] cycloadditions of 2-substituted norbornenes with alkynes have been investigated experimentally and theoretically using density functional theory. Most of the cycloadditions occurred smoothly at room temperature, giving the exo cycloadducts in excellent yields. Regioselectivities of 1.2:1 to 15:1 were observed with various substituents on the C-2 position of the norbornenes. Exo-C-2-substituents usually showed greater remote substituent effects on the regioselectivities of the cycloadditions than the corresponding endo-C-2-substituents. The regioselectivity of the cycloadditions with C-2 substituents containing an exocyclic double bond (sp2 hybridized carbon at C-2) are much higher than the cycloadditions with the exo and endo 2-substituted norbornenes. Theoretical studies predicted the same trends as experiment and matched the experimental product ratios well. The nature of the regioselectivity in this reaction is discussed. Different strengths of the pi(C5-C6)-->pi(C2-Y) or pi(C5-C6)-->sigma(C2-Y) orbital interactions in 2-substituted norbornenes result in different degrees of C5-C6 double bond polarization. Stronger C5-C6 polarization will increase the difference in the activation energies between the major and minor pathways and thus lead to greater regioselectivities.     

Isolable tris(alkyne) and bis(alkyne) complexes of gold(I)

Golden trefoils: Tris(alkyne)gold complex [(coct)(3)Au][SbF(6)] (see picture; 1-SbF(6)) can be synthesized from cyclooctyne (coct) and AuSbF(6) generated in situ. Treatment of AuCl with cyclooctyne led to the bis(alkyne)gold complex [Au(coct)(2)Cl] (2). DFT analysis indicates that the cyclooctyne ligands are net electron donors in 1 but overall electron acceptors in 2. AuSbF(6) is shown to mediate [2+2+2] cycloaddition reactions of alkynes.     

Rh(I)-catalyzed intramolecular [3 + 2] cycloaddition of trans-vinylcyclopropane-enes

Vinylcyclopropane (VCP) has been well applied as a five-carbon component, rather than a three-carbon component, in transition-metal catalyzed cycloadditions. Here we demonstrate a Rh(I)-catalyzed [3 + 2] reaction of trans-VCP-enes, where VCP acts as a three-carbon synthon to furnish five-membered carbocycles. This novel cycloaddition is efficient in generating bicyclic cyclopentanes in good yields from simple and easily prepared substrates. When cis-VCP-ene is used as the substrate, VCP acts as a five-carbon unit to give a [5 + 2] cycloadduct. Rationalization of the [3 + 2] and [5 + 2] cycloadditions of VCP-enes has been proposed.     

Highly Enantioselective Catalytic Asymmetric [2+2] Cycloadditions of Cyclic α‐Alkylidene β‐Oxo Imides with Ynamides

Highly enantioselective catalytic asymmetric [2+2] cycloadditions of cyclic α‐alkylidene β‐oxo imides with ynamides are described. The high reactivity of the cyclic α‐alkylidene β‐oxo imide allows the [2+2] cycloadditions of a hindered substrate with unreactive ynamides at low temperature. The X‐ray crystallographic analysis of the product suggests that the enantioselectivity of the [2+2] cycloaddition can be well explained by the chelate model comprising the intramolecular hydrogen bond, wherein the cyclic α‐alkylidene β‐oxo imide coordinates with Cu^II through the two imide carbonyls. The imide group in the product can be transformed to amide, nitrile, and ester groups; moreover, it is removable.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

Ruthenium-catalyzed homo Diels-Alder [2 + 2 + 2] cycloadditions of alkynyl phosphonates with bicyclo[2.2.1]hepta-2,5-diene

Ruthenium-catalyzed homo Diels-Alder [2 + 2 + 2] cycloadditions between alkynyl phosphonates and bicyclo[2.2.1]hepta-2,5-diene were studied. The observed reactivity was found to be dependent on the presence of the phosphonate moiety. The Ru-catalyzed cycloaddition was compatible with a variety of aromatic and aliphatic substituted alkynyl phosphonates, providing the corresponding phosphonate substituted deltacyclenes in low to good yields (up to 88%).     

Thioallenoates in catalytic enantioselective [2+2]-cycloadditions with unactivated alkenes

The application of thioallenoates to catalytic enantioselective [2+2]-cycloadditions with unactivated alkenes is reported. In many cases, the thioallenoates examined exhibit superior reactivity and selectivity compared to the allenic esters generally used in these cycloadditions.     

On the Critical Effect of the Metal (Mo vs. W) on the [3+2] Cycloaddition Reaction of M3S4 Clusters with Alkynes: Insights from Experiment and Theory

Whereas the cluster [Mo₃S₄(acac)₃(py)₃]⁺ ([ 1 ]⁺, acac=acetylacetonate, py=pyridine) reacts with a variety of alkynes, the cluster [W₃S₄(acac)₃(py)₃]⁺ ([ 2 ]⁺) remains unaffected under the same conditions. The reactions of cluster [ 1 ]⁺ show polyphasic kinetics, and in all cases clusters bearing a bridging dithiolene moiety are formed in the first step through the concerted [3+2] cycloaddition between the C?C atoms of the alkyne and a Mo(μ‐S)₂ moiety of the cluster. A computational study has been conducted to analyze the effect of the metal on these concerted [3+2] cycloaddition reactions. The calculations suggest that the reactions of cluster [ 2 ]⁺ with alkynes feature ΔG^≠ values only slightly larger than its molybdenum analogue, however, the differences in the reaction free energies between both metal clusters and the same alkyne reach up to approximately 10 kcal mol^?1, therefore indicating that the differences in the reactivity are essentially thermodynamic. The activation strain model (ASM) has been used to get more insights into the critical effect of the metal center in these cycloadditions, and the results reveal that the change in reactivity is entirely explained on the basis of the differences in the interaction energies E_int between the cluster and the alkyne. Further decomposition of the E_int values through the localized molecular orbital‐energy decomposition analysis (LMO‐EDA) indicates that substitution of the Mo atoms in cluster [ 1 ]⁺ by W induces changes in the electronic structure of the cluster that result in weaker intra‐ and inter‐fragment orbital interactions.     

Silver-catalyzed [2 + 2] cycloadditions of siloxy alkynes

We have described the first [2 + 2] cycloadditions of siloxy alkynes with a range of unsaturated carbonyl compounds. The reactions are efficiently promoted by substoichiometric amount of silver trifluoromethanesulfonimide and display excellent regio- and diastereoselectivity combined with a broad substrate scope. Our studies have established unambiguously the stepwise mechanism of this process and provided evidence for a novel role of silver in the catalytic cycle of the reaction, which involves silver-based complexation and activation of siloxy alkyne toward the subsequent 1,4-addition.