Thermodynamics, structure and properties of polynuclear lanthanide complexes with a tripodal ligand: insight into their self-assembly

Self-assembly processes between a tripodal ligand and Ln(III) cations have been investigated by means of supramolecular analytical methods. At an equimolar ratio of components, tetranuclear tetrahedral complexes are readily formed in acetonitrile. The structural analysis of the crystallographic data shows a helical wrapping of binding strands around metallic cations. The properties of this series of highly charged 3D compounds were examined by using NMR spectroscopy and optical methods in solution and in the solid state. In the presence of excess metal, a new trinuclear complex was identified. The X-ray crystal structure elucidated the coordination of metallic cations with two ligands of different conformations. By varying the metal/ligand ratio, a global speciation of this supramolecular system has been evidenced with different spectroscopic methods. In addition, these rather complicated equilibria were successfully characterised with the thermodynamic stability constants. A rational analysis of the self-assembly processes was attempted by using the thermodynamic free energy model and the impact of the ligand structure on the effective concentration is discussed.     

Ruthenium(II) as a novel "labile" partner in thermodynamic self-assembly of heterobimetallic d-f triple-stranded helicates

Unsymmetrical substituted bidentate benzimidazol-2-ylpyridine ligands L2 and L3 react with [Ru(dmso)(4)Cl(2)] in ethanol to give statistical 1:3 mixtures of fac-[Ru(Li)(3)](2+) and mer-[Ru(Li)(3)](2+) (i=2, 3; DeltaGtheta(isomerisation)=-2.7 kJ mol(-1)). In more polar solvents (acetonitrile, methanol), the free energy of the facial<=>meridional isomerisation process favours mer-[Ru(Li)(3)](2+), which is the only isomer observed in solution at the equilibrium (DeltaGtheta(isomerisation)< or = -11.4 kJ mol(-1)). Since the latter process takes several days for [Ru(L2)(3)](2+), fac-[Ru(L2)(3)](2+) and mer-[Ru(L2)(3)](2+) have been separated by chromatography, but the 28-fold increase in velocity observed for [Ru(L3)(3)](2+) provides only mer-[Ru(L3)3](ClO(4))2 after chromatography (RuC(60)H(51)N(9)O(8)Cl(2), monoclinic, P2(1)/n, Z=4). The facial isomer can be stabilised when an appended tridentate binding unit, connected at the 5-position of the benzimidazol-2-ylpyridine unit in ligand L1, interacts with nine-coordinate lanthanides(III). The free energy of the facial<=>meridional isomerisation is reversed (DeltaGtheta(isomerisation)> or =11.4 kJ mol(-1)), and the Ru--N bonds are labile enough to allow the quantitative thermodynamic self-assembly of HHH-[RuLu(L1)(3)]5+ within hours ([RuLu(L1)3](CF(3)SO(3))(4.5)Cl(0.5)(CH(3)OH)(2.5): RuLuC(106)H(109)Cl(0.5)N(21)O(19)S(4.5)F(13.5), triclinic, P(-)1, Z=2). Electrochemical and photophysical studies show that the benzimidazol-2-ylpyridine units in L1-L3 display similar pi-acceptor properties to, but stronger pi-donor properties than, those found in 2,2'-bipyridine. This shifts the intraligand pi-->pi* and the MLCT transitions toward lower energies in the pseudo-octahedral [Ru(Li)(3)](2+) (i=2, 3) chromophores. The concomitant short lifetime of the (3)MLCT excited state points to efficient, thermally activated quenching via low-energy Ru-centred d-d states, a limitation which is partially overcome by mechanical coupling in HHH-[RuLu(L1)(3)]5+.     

Coordination-driven self-assembly, structures, and dynamic properties of diplatinum hexatriynediyl and butadiynediyl complexes in which the sp carbon chains are shielded by sp3 carbon chains: towards endgroup-endgroup interactions

Sequential reactions of trans-(C6F5)(p-tol3P)2Pt(C[triple chemical bond]C)3SiEt3 (PtC6SiEt3) with nBu4N+ F(-) (THF/methanol), PtCl, KPF6/tBuOK, and CuCl give trans,trans-[(C6F5){(p-tol3P)2}Pt(C[triple chemical bond]C)3Pt{(Pp-tol3)2}(C6F5)] (PtC6Pt) in 95 % yield on multigram scales. Reactions of PtC6Pt and Ar2P(CH2)mPAr2 afford substitution products trans,trans-[(C6F5){(Ar2P(CH2)mPAr2)}Pt(C[triple chemical bond]C)3Pt{(Ar2P(CH2)mPAr2)}(C6F5)] (PtC6Pt-m/Ar; m/Ar=8/p-tol, 78 %; 10/Ph, 82 %; 11/Ph, 69 %; 12/Ph, 57 %; 14/p-tol, 57 %; 14/p-C6H4-tBu, 71 %), in which the diphosphines span the square planar platinum endgroups. An analogous reaction with PEt3 gives a tetrakis PEt3 complex Pt'C6Pt' (72 %). The crystal structures of PtC6Pt, Pt'C6Pt', PtC6Pt-10/Ph, PtC6Pt-11/Ph, and PtC6Pt-14/p-tol or solvates thereof are compared. In PtC6Pt, the endgroups can avoid van der Waals contact, and define angles of 0 degrees . In PtC6Pt-14/p-tol, the sp3 chains twist around the sp chain in a chiral double-helical motif, with an endgroup/endgroup angle of 189 degrees . The sp3 chains are too short to adopt analogous conformations in the other complexes, but laterally shield the sp chain. NMR spectroscopy shows that the helical enantiomers of PtC6Pt-14/p-tol rapidly interconvert in solution at low temperature. A crystal structure of PtC4Pt shows endgroups that are in van der Waals contact and define an angle of 41 degrees . Reactions with Ar2P(CH2)8PAr2 give PtC4Pt-8/Ar (Ar=Ph, 53 %; p-tol, 87 %). Low-temperature NMR spectroscopy establish non-helical chiral conformations. Electrochemical oxidations of the diplatinum complexes are analyzed, the reversibilities of which decrease with increasing sp chain length.     

Messages in molecules: ligand/cation coding and self-recognition in a constitutionally dynamic system of heterometallic double helicates

Double helicates are known to exhibit self-recognition characteristics determined by the coordination geometry of the metal involved as well as by the topicity of the ligands. Combining tridentate (terpyridine, T) or bidentate (bipyridine, B) subunits in a tritopic strand affords a set of ligands able to assemble by pairs to form double helicates, homo- or heterostranded, homo- or heterotopic, depending on the coordination properties of the metals involved. The four ligand strands, BBB, TTT, BBT, and TBT form constitutionally dynamic sets of double helicates with the metal ions Cu(I), Cu(II), and Zn(II); these helicates correspond to the correct coding of the BB, BT, and TT pairs for tetra-, penta-, and hexacoordinate Cu(I), Cu(II), and Zn(II) cations, respectively.     

A bridge between pillared-layer and helical structures: a series of three-dimensional pillared coordination polymers with multiform helical chains

Rational self-assembly of a long V-shaped 3,3',4,4'-benzophenonetetracarboxylate (bptc) ligand and metal salts in the presence of linear bidentate ligand yield a series of novel pillared helical-layer complexes, namely, [Cu2(bptc)(bpy)2] (1), [M3(Hbptc)2(bpy)3(H2O)4].2 H2O (M = Fe(2) and Ni(3)), [Co2(bptc)(bpy)(H2O)].0.5 bpy (4), [Cd2(bptc)(bpy)(H2O)2].H2O (5), [Mn2(bptc)(bpy)1.5(H2O)3] (6) and [M2(bptc)(bpy)0.5(H2O)5].0.5 bpy (M = Mn(7), Mg(8) and Co(9), bpy=4,4'-bipyridine). Their structures were determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra, and thermogravimetric (TG) analyses. The structure of 1 consists of two types of chiral layers, one left-handed and the other right-handed, which are connected by bpy pillars to generate a novel 3D open framework featuring four distinct helical chains. Compounds 2 and 3 are isostructural and feature 3D structures formed from the interconnection of arm-shaped helical layers with bpy pillars. Compound 4 is a pillared helical double-layer complex containing four different types of helices, among which the nine-fold interwoven helices constructed from triple-stranded helical motifs are unprecedented. Compound 5 exhibits a novel 3D covalent framework which features nanosized tubular channels. These channels are built from helical layers pillared by bptc ligands. The structure of 6 is constructed from {Mn(bptc)(H2O)}n2n- layers, which consist of left- and right-handed helical chains, pillared by [Mn2(bpy)3(H2O)4]4+ complexes into a 3D framework. To the best of our knowledge, compounds 1-6 are the first examples of pillared helical-layer coordination polymers. Compounds 7-9 are isostructural and exhibit interesting 2D helical double-layer structures, which are constructed from {M(bptc)(H2O)2}n2n- ribbons cross-linked by [M2(bpy)(H2O)6]4+ complexes. Furthermore, the 3D supramolecular structures of 7-9 are similar to the 3D structure of 6, and the 2D structure of 7 can be transformed into the 3D structure of 6 at higher reaction temperature. By inspection of the structures of 1-9, it is believed that the V-shaped bptc ligand and V-shaped phthalic group of the bptc ligand are important for the formation of the helical structures. The magnetic behavior of compounds 1, 2, 4, 6, and 9 was studied and indicated the existence of antiferromagnetic interactions. Moreover, compound 5 shows intense photoluminescence at room temperature.     

Synthesis,crystal structures and fluorescence properties of two new di- and polynuclear Cd(II) complexes with N2O donor set of a tridentate Schiff base ligand

Two new Cd(II) complexes, having one binuclear structure [Cd₂(L)₂(Cl)₂] (1) and another azido bridged one-dimensional zig-zag polynuclear network [Cd₃(μ_1,1-N₃)₄(L)₂{H₂N(CH₂)₂N(C₂H₅)₂} · H₂O]_n (2) have been synthesized from a tridentate N₂O donor Schiff base ligand LH, [LH = (OCH₃)(OH)C₆H₃CHN(CH₂)₂N(C₂H₅)₂], which is the condensation product of 2-hydroxy-4-methoxybenzaldehyde and 2-diethylaminoethylamine. Both the complexes 1 and 2 have been characterized by elemental analyses, IR & ¹H NMR spectroscopy, TGA and fluorescence studies. Finally their structures have been established by single crystal X-ray diffraction method. Structural study reveals that in the complex 1, two Cd(II) centers are held together by two μ₂-phenolato oxygen atoms and the terminal chlorine atom occupies the apical site of the square pyramidal environment of each metal center. In case of complex 2, the trinuclear asymmetric unit contains octahedral Cd(II) centers which are further held together by doubly end-on azido bridging to form a zig-zag polynuclear structure. It also displays intraligand ¹(π–π^∗) fluorescence and can potentially serve as photoactive material.