Structure of the hydrated and dimethyl sulfoxide solvated rubidium ions in solution

The structure of the hydrated and the dimethyl sulfoxide solvated rubidium ions in solution has been determined by means of large-angle X-ray scattering (LAXS) and extended X-ray absorption fine structure (EXAFS) studies. The models of the hydrated and dimethyl sulfoxide solvated rubidium ions fitting the experimental data best are square antiprisms with Rb-O bond distances of 2.98(2) and 2.98(3) A, respectively. The EXAFS data show a significant asymmetry in the Rb-O bond distance distribution with C(3) values of 0.0076 and 0.015 A(3), respectively. No second hydration sphere is observed around the hydrated rubidium ion. The dimethyl sulfoxide solvated rubidium ion displays a Rb-O-S bond angle of ca. 130 degrees, which is typical for a medium hard electron acceptor such as rubidium.     

Decomposition of Aryldiazonium Ions in Homogenous Solutions Part II: Arylations with benzenediazonium ions and p-nitrobenzenediazonium ions in dimethyl sulfoxide

When p-nitrobenzenediazonium tetrafluoroborate is decomposed in the presence of dimethyl sulfoxide/benzene or dimethyl sulfoxide/nitrobenzene systems under nitrogen, the respective biphenyl derivatives are obtained in good yield. With benzenediazonium tetrafluoroborate in the same systems the yields are low. The influence of oxygen, iodine, iodobenzene and N, N-diphenylhydroxylamine on the products of the reactions were determined. The by-products, isomer distribution with nitrobenzene as a substrate, and the partial and total rate factors were also determined. From the above data it can be shown that the reaction with p-nitrobenzenediazonium salt is a homolytic process and that with the unsubstituted benzenediazonium salt is essentially a heterolytic reaction. The problem of the mechanism of the radical forming steps (electron transfer or adduct formation) and the mechanistic relationship to other modes of arylation (aroylperoxide, classical two-phase Gomberg-Bachmann reaction, catalysis by transition metal ions, nitrite ions, etc. electron transfer properties of DMSO) are discussed.     

Reaction of π-allylirontric arbonylhalides with dimethyl sulfoxide

Conclusions Dimethyl sulfoxide readily decomposes -allylirontricarbonylhalides with the evolution of 1,5-hexadiene and carbon monoxide and formation of sulfoxide complexes of composition [(CH₃)₂SO]₅FeX₂. In the complexes isolated coordination is through the oxygen of the sulfoxide group.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 192–194, January, 1968.We thank L. I. Denisovich for the polarographic studies.     

Solvation and dynamic behavior of cyclodextrins in dimethyl sulfoxide solution

High-frequency dielectric relaxation behavior up to 20 GHz was investigated for plain (alpha, beta, gamma) and (62 and 100%) methylated cyclodextrins, CDs, in dimethyl sulfoxide, DMSO, solution. Each hydrogen atom of OH groups of the CDs solvated a DMSO molecule for a residence time of 130-180 ps due to the hydrogen bond formation to an oxygen atom of DMSO, and a few DMSO molecules were included in cavities of the CDs for a while similar to the residence time. The overall rotational relaxation modes of solvated CDs were also observed depending on the effective sizes of the solvated CDs.     

Investigations on the structure of dimethyl sulfoxide and acetone in aqueous solution

Aqueous solutions of dimethyl sulfoxide (DMSO) and acetone have been investigated using neutron diffraction augmented with isotopic substitution and empirical potential structure refinement computer simulations. Each solute has been measured at two concentrations-1:20 and 1:2 solute:water mole ratios. At both concentrations for each solute, the tetrahedral hydrogen bonding network of water is largely unperturbed, though the total water molecule coordination number is reduced in the higher 1:2 concentrations. With higher concentrations of acetone, water tends to segregate into clusters, while in higher concentrations of DMSO the present study reconfirms that the structure of the liquid is dominated by DMSO-water interactions. This result may have implications for the highly nonideal behavior observed in the thermodynamic functions for 1:2 DMSO-water solutions.     

Adsorption process of phenothiazine solution in dimethyl sulfoxide on graphite electrodes

In this paper, an original solution for the modeling and simulation of the adsorption process of a phenothiazine derivative on graphite electrodes is presented. The adsorption process is considered a distributed parameter one, due to the fact that the adsorbed phenothiazine quantity is a function depending on two independent variables. The structure parameters of the adsorption process, which define the influence of both independent variables, are determined using an experimental identification method. The experimental data are obtained through an experiment which is based on the process step response. In order to simulate the adsorption process, the approximate analytical solution, representing the process model, is determined. The simulation results prove the model generality; it is being simulated in relation to both independent variables.     

An acidity scale of 1,3-dialkylimidazolium salts in dimethyl sulfoxide solution

Equilibrium acidities of 16 1,3-dialkylimidazolium-type ionic liquid (IL) molecules (1-16) were systematically measured by the overlapping indicator method at 25 degrees C in dimethyl sulfoxide (DMSO) solution. The pKa values were observed to range from 23.4 for IL 12 to 19.7 for IL 6 (Tables 1 and 2), responding mainly to structural variations on the cation moiety. Excellent agreement between the spectrophotometrically determined pKa and that derived from NMR titration for 1,3,4,5-tetramethylimidazolium bis(trifluoromethanesulfonyl)imide (12) and the close match of the obtained pK values with the reported data in literature provide credence to the acidity measurements of the present work. The substituent effects at the imidazolium ring and the effects of counterions on the acidities of ionic liquids are discussed.     

Dediazoniation of arenediazonium salts with trivalent-phosphorus compounds. Tool for examination of the reactivity of phosphorus-centered radicals

Trialkyl phosphites ( 1 ), dialkyl phenylphosphinites ( 2 ), and alkyl diphenylphosphonites ( 3 ) as well as 2-phenyl-1,3,2-dioxaphospholan ( 4b ) and 2-phenyl-1,3,2-dioxaphosphorinan ( 4b ) give rise to dediazoniation of arenediazonium salt ( 5 ) in an alcoholic solvent under an argon atmosphere at 20°C. The reaction proceeds via a radical-chain mechanism initiated by single-electron transfer (SET) from the trivalent-phosphorus compounds to 5 , as a result of which, an aryl radical Ar⋅ and a cation radical 15 are generated from the former and the latter, respectively. The aryl radical Ar⋅ participates in this chain process abstracting a hydrogen from the solvent alcohol, yielding the corresponding arene ArH. The cation radical 15 undergoes both an ionic reaction with the solvent alcohol and a radical coupling with Ar⋅, giving the phosphoranyl radical 16 and the phosphonium ion 17 , respectively, as intermediates. The phosphoranyl intermediate 16 decomposes through either the SET process to 5 or by β-scission, yielding the oxidation product (phosphate, phosphonate, or phosphinate from 1 , 2 , or 3 , respectively, or phosphonates from 4 ). The phosphonium intermediate 17 affords the arylated product (phosphonate, phosphinate, or phosphine oxide from 1 , 2 , 3 , respectively, or the phosphinate from 4 ). Among the trivalent-phosphorus compounds tested, 1 gives the arylated product in the highest yield. This observation, together with the literature data of ESR for structurally related phosphoranyl radicals, indicates that the radical coupling of 15 with Ar⋅ is facilitated by the high spin density on its central phosphorus atom.     

Temperature-dependent kinetics of the simplest Criegee intermediate reaction with dimethyl sulfoxide

Criegee intermediates are thought to play roles in atmospheric chemistry, including OH radical formation, oxidation of SO₂, NO₂, etc. CH₂OO is the simplest Criegee intermediate, of which the reactivity has been a hot topic. Here we investigated the kinetics of CH₂OO reaction with dimethyl sulfoxide (DMSO) under 278–349 K and 10–150 Torr. DMSO is an important species formed in the oxidation of dimethyl sulfide in the biogenic sulfur cycle. The concentration of CH₂OO was monitored in real-time via its mid-infrared absorption band at about 1,286 cm⁻¹ (Q branch of the ν₄ band) with a high-resolution quantum cascade laser spectrometer. The 298 K bimolecular rate coefficient was determined to be k₂₉₈ = (2.3 ± 0.3) × 10⁻¹² cm³/s at 30 Torr with an Arrhenius activation energy of −3.9 ± 0.2 kcal/mol and a weak pressure dependence for pressures higher than 30 Torr (k₂₉₈ = (2.8 ± 0.3) × 10⁻¹² cm³/s at 100 Torr). The reaction is speculated to undergo a five-membered ring intermediate, analogous to that of CH₂OO with SO₂. The negative activation energy indicates that the rate-determining transition state is submerged. The magnitude of the reaction rate coefficient lies in between those of CH₂OO reactions with (CH₃)₂CO and with SO₂.     

Kinetics and mechanism of oxidation of dimethyl sulfoxide by chloramine-T in aqueous solution

The kinetics of oxidation of dimethyl sulfoxide (DMSO) by chloramine-T (CAT) is studied in HClO₄ and NaOH media with OsO₄ as a catalyst in the latter medium. In acid medium, the rate law is -d [CAT]/dt = k [CAT][DMSO][H⁺]. Alkali retards the reaction and the rate law takes the form -d [CAT]/dt = k [CAT][DMSO][OsO₄]/[NaOH], but is reduced to -d [CAT]/dt = k [CAT][DMSO] at higher alkali concentrations. The reaction is subjected to changes in (a) ionic strength, (b) concentrations of added neutral salts, (c) concentrations of added reaction product, (d) dielectric constant, and (e) solvent isotope effect, and the subsequent effects on the reaction rate are studied. The reaction mechanism in acid medium assumes an electrophilic attack by the free acid RNHCl (CAT′) at the sulfur site in DMSO, forming a reaction intermediate which subsequently decomposes to dimethyl sulfone on hydrolysis. Formation of a cyclic complex between RNHCl and OsO₄ which interacts with the substrate in a slow step explains the observed results in alkaline medium. The simplification of the rate equation at higher alkali concentrations is attributed to a direct reaction between chloramine-T and the substrate.     

First-principle predictions of absolute pKa's of organic acids in dimethyl sulfoxide solution

MP2/6-311++G(d,p) and B3LYP/6-311++G(2df,p) methods were found to be able to predict the gas-phase acidities of various organic acids with a precision of 2.2 and 2.3 kcal/mol. A PCM cluster-continuum solvation method was developed that could predict the solvation free energies of various neutral, cationic, and anionic organic species in DMSO with a precision of about 2.0 kcal/mol. Using these carefully tested methods, we successfully predicted the pKa's of 105 organic acids in DMSO with a precision of 1.7-1.8 pKa units. We also predicted the pKa's of a variety of organosilanes in DMSO for the first time using the newly developed methods. This study was one of the first that employed first-principle methods for calculating pKa's of unrelated compounds in organic solutions.     

Composition and electronic spectra of some dimethyl sulfoxide complexes of transition metal ions

The dimethyl sulfoxide complexes of Cr(III), Mn(II) Mn(III), Fe(III), Co(II), Ni(II) and Cu(II) were obtained as their perchlorates and characterized by thorough chemical analysis and measurements of electronic spectra.The complexes are liable to incorporate extra dimethyl sulfoxide and perchloric acid beyond the composition M(DMSO)₆(ClO₄)_n. Dimethyl sulfoxide is comparable to urea regarding its spectrochemical and nephelauxetic strength     

Preferential solvation of lysozyme by dimethyl sulfoxide in binary solutions of water and dimethyl sulfoxide

To reveal the denaturation mechanism of lysozyme by dimethyl sulfoxide (DMSO), thermal stability of lysozyme and its preferential solvation by DMSO in binary solutions of water and DMSO was studied by differential scanning calorimetry (DSC) and using densities of ternary solutions of water (1), DMSO (2) and lysozyme (3) at 298.15 K. A significant endothermic peak was observed in binary solutions of water and DMSO except for a solution with a mole fraction of DMSO (x ₂) of 0.4. As x ₂ was increased, the thermal denaturation temperature T _m decreased, but significant increases in changes in enthalpy and heat capacity for denaturation, ΔH _cal and ΔC _p, were observed at low x ₂ before decreasing. The obtained amount of preferential solvation of lysozyme by DMSO (∂g ₂/∂g ₃) was about 0.09 g g⁻¹ at low x ₂, indicating that DMSO molecules preferentially solvate lysozyme at low x ₂. In solutions with high x ₂, the amount of preferential solvation (∂g ₂/∂g ₃) decreased to negative values when lysozyme was denatured. These results indicated that DMSO molecules do not interact directly with lysozyme as denaturants such as guanidine hydrochloride and urea do. The DMSO molecules interact indirectly with lysozyme leading to denaturation, probably due to a strong interaction between water and DMSO molecules.     

Viscoelastic behavior of polyacrylonitrile/dimethyl sulfoxide concentrated solution with water

The spinnability and polydispersity of polyacrylonitrile/dimethyl sulfoxide (PAN/DMSO)/H₂O spinning solutions with conventional PAN molecular weight and comparative high PAN concentration have been investigated using a cone‐plate rheometer. It is observed from the measurements that, the viscosities of the solutions decreased with the rising of shear rate, and then stabilized to almost the same value, regardless of the PAN concentration. The chain orientation in the fiber formed under constant shear rate cannot be changed considerably even after long relaxation of more than 900s. For dynamic experiments, a steady increase of both G′ and G″ with escalating oscillation frequency was seen for all samples. Higher viscous‐elastic modulus at higher H₂O content was found, too. It is also concluded from the log G′ ? log G″ plot and the gel point that the PAN/DMSO/H₂O system with regular PAN molecular weight behaves very close to a mono‐disperse system, thus very suitable for gel spinning and for preparation of high performance PAN precursor fiber. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1437–1442, 2009     

Mechanism of the reaction of radicals with peroxides and dimethyl sulfoxide in aqueous solution

The reactions of methyl and methylperoxyl radicals derived from dimethyl sulfoxide (DMSO) with hydrogen peroxide, peroxymonocarbonate (HCO4 (-)), and persulfate were studied. The major reaction observed for the hydroperoxides was the abstraction of the hydrogen atom by the radicals. The radicals interact with a lone pair of electrons on the peroxide to produce methanol and formaldehyde. Furthermore, the results indicate that in RO2H and RO2R', electron-withdrawing groups cause a considerable increase in the reactivity of the peroxides towards the radicals and not only towards nucleophiles. The HO2 (.)/O2 (.-) and CO3 (.-) radicals react with DMSO to produce methyl radicals. Thus, the formation of the (.)CH3 radicals in the presence of DMSO is not proof of the formation of the (.)OH radicals in the system. These reactions must be considered when radical processes, such as in biological and catalytic systems, are studied. Especially, the plausible role of HCO4 (-) ions in biological systems as a source of oxidative stress cannot be overlooked.     

Ion exchange in dimethyl sulfoxide media. IV

Summary Selective separations of beryllium from other metal ions (Cu, Cd, Zn, Ni, Fe, Co, Mg, Ca, Sr, Ba, Al, and Pb) were achieved by means of cation exchange in an aqueous 20% v/v DMSO medium containing 0.25 mol/l of thiocyanate. The observed improvements of separation factors in the presence of DMSO were attributed mainly to enhanced complex formation with thiocyanate for a number of heavy metal ions, and for increased differentiation of solvation tendencies in the binary medium. From a semi-quantitative study of species distribution it was concluded that strongly solvated BeSCN⁺ and Be⁺⁺ species predominate under conditions of the described column elutions, although traces of Be(SCN)₂ may be present. The simplicity and convenience of the described procedure suggest wide applicability for isolation or separation ofg to mg amounts of beryllium from concomitant cations, particularly in the presence of large quantities of aluminum and the alkaline earth metals.

---

Zusammenfassung Die selektive Trennung des Berylliums von anderen Metallionen (Cu, Cd, Zn, Ni, Fe, Co, Mg, Ca, Sr, Ba, Al und Pb) wurde erreicht durch Kationenaustausch in 20% iger wäßriger Dimethylsulfoxidlösung, die 0,25-molar an Thiocyanat war. Die Verbesserung der Trennungsfaktoren in Gegenwart von DMSO beruht hauptsächlich auf der verstärkten Komplexbildung einiger Schwermetallionen mit Thiocyanat und auf dem größeren Unterschied der Solvatationsneigung in dem binären Medium. Aus einer semiquantitativen Untersuchung der Verteilungsverhältnisse ergab sich, daß stark solvatierte BeSCN⁺- und Be²⁺-Ionen unter den angegebenen Elutionsbedingungen vorherrschen, wenn auch Spuren von Be(SCN)₂ anwesend sein können. Die Einfachheit des beschriebenen Verfahrens legt dessen Anwendung zur Isolierung oder Trennung von Mikrogramm- bis Milligrammengen Be von Begleitkationen nahe, besonders bei Gegenwart großer Mengen Aluminium und alkalischer Erdmetalle.