A flash photolysis resonance fluorescence investigation of the reaction OH + H2O2 → HO2 + H2O

The flash photolysis resonance fluorescence technique has been used to measure the rate constant for the reaction over the temperature range of 250–370 K. The present results are in excellent agreement with three very recent studies, and the combined data set can been used to derive the expression similar to that currently used in atmospheric modeling applications. A summary of our computer simulation of this reaction system is presented. The results of the computations indicate the absence of secondary reaction complications in the present work while revealing significant problems in the earlier (pre-1980) studies of the title reaction.     

A shock tube study of the OH + OH → H2O + O reaction

The rate coefficient for the reaction has been determined in mixtures of nitric acid (HNO₃) and argon in incident shock wave experiments. Quantitative OH time-histories were obtained by cw narrow-linewidth uv laser absorption of the R₁(5) line of the A² σ⁺ ← X² Π_i (0,0) transition at 32606.56 cm^?1 (vacuum). The experiments were conducted over the temperature range 1050–2380 K and the pressure range 0.18–0.60 atm. The second-order rate coefficient was determined to be with overall uncertainties of +11%, ?16% at high temperatures and +25%, ?22% at low temperatures. By incorporating data from previous investigations in the temperature range 298–578 K, the following expression is determined for the temperature range 298–2380 K © 1994 John Wiley & Sons, Inc.     

Interaction energy and the shift in OH stretch frequency on hydrogen bonding for the H2O → H2O,CH3OH → H2O,and H2O → CH3OH dimers

The ability to use calculated OH frequencies to assign experimentally observed peaks in hydrogen bonded systems hinges on the accuracy of the calculation. Here we test the ability of several commonly employed model chemistries—HF, MP2, and several density functionals paired with the 6‐31+G(d) and 6‐311++G(d,p) basis sets—to calculate the interaction energy (D_e) and shift in OH stretch fundamental frequency on dimerization (δ(ν)) for the H₂O → H₂O, CH₃OH → H₂O, and H₂O → CH₃OH dimers (where for X → Y, X is the hydrogen bond donor and Y the acceptor). We quantify the error in D_e and δ(ν) by comparison to experiment and high level calculation and, using a simple model, evaluate how error in D_e propagates to δ(ν). We find that B3LYP and MPWB1K perform best of the density functional methods studied, that their accuracy in calculating δ(ν) is ≈ 30–50 cm^?1 and that correcting for error in D_e does little to heighten agreement between the calculated and experimental δ(ν). Accuracy of calculated δ(ν) is also shown to vary as a function of hydrogen bond donor: while the PBE and TPSS functionals perform best in the calculation of δ(ν) for the CH₃OH → H₂O dimer their performance is relatively poor in describing H₂O → H₂O and H₂O → CH₃OH. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

High temperature determination of the rate coefficient for the reaction H2O + CN → HCN + OH

The rate coefficient, k, of the reaction has been determined in the temperature range 2460–2840 K using a shock tube technique. C₂N₂? H₂O? Ar mixtures were heated behind incident shock waves and the CN and OH concentration time histories were monitored simultaneously using broad-band absorption near 388 nm (CN) and narrow-line laser absorption at 306.67 nm (OH). The rate coefficient expression providing the best fit to the data was with uncertainty limits of about ±45% in the temperature range 2460–2840 K. The rate coefficient of the reverse reaction was calculated using detailed balancing, and its extrapolation to lower temperatures was compared with previously published results.     

High‐temperature shock tube study of the reactions CH3 + OH → products and CH3OH + Ar → products

The reaction between methyl and hydroxyl radicals has been studied in reflected shock wave experiments using narrow‐linewidth OH laser absorption. OH radicals were generated by the rapid thermal decomposition of tert‐butyl hydroperoxide. Two different species were used as CH₃ radical precursors, azomethane and methyl iodide. The overall rate coefficient of the CH₃ + OH reaction was determined in the temperature range 1081–1426 K under conditions of chemical isolation. The experimental data are in good agreement with a recent theoretical study of the reaction. The decomposition of methanol to methyl and OH radicals was also investigated behind reflected shock waves. The current measurements are in good agreement with a recent experimental study and a master equation simulation. © 2008 Wiley Periodicals, Inc. 40: 488–495, 2008     

Laser photolysis/laser-induced fluorescence studies of reaction rates of OH with CH3Cl,CH2Cl2, and CHCl3 over an extended temperature range

A modified laser photolysis/laser-induced fluorescence technique has been used to measure atmospheric pressure absolute rate coefficients for the reaction of hydroxyl (OH) radicals with the chlorinated methanes (CH₃Cl, CH₂Cl₂, and CHCl₃). Data have been obtained for these compounds over the widest temperature range (292–800 K) that has been reported in the literature using a single experimental apparatus. The temperature dependence of the rate data is best represented by the following three-parameter expressions: Uncertainties in the pre-exponential and exponential term are expressed as 95% confidence intervals. For the temperature exponent, error limits represent a ±10% change in the total error of best fit. The degree of curvature in the Arrhenius plots appeared to increase with increasing Cl substitution of the reactant. However, the uncertainty in the temperature exponent for the CH₃Cl data was large in comparison with the other chlorinated methanes. Thus, data of greater precision at elevated temperatures are necessary to further explore this relationship. The rate coefficients were compared with recent semiempirical and transition state theory models for haloalkane-OH hydrogen transfer reactions over a temperature range of 250–800 K. The transition state model of Cohen and Benson was in excellent agreement with the CH₃Cl and CH₂Cl₂ data. The semiempirical structure activity relationship developed by Atkinson represented the best fit of the CHCl₃ data, although it underestimated the experimental data by more than a factor of 2 at 800 K. The extreme care used to remove and alayze for reactive impurities along with the agreement with other experimental studies suggests that transition state and semi-empirical models for CHCl₃ must be modified to account its reaction behavior at high temperature.     

Reaction‐path dynamics and theoretical rate constants for the reaction CH4 + O3 → HOOO + CH3

We present a direct ab initio dynamics study of thermal rate constants of the hydrogen abstraction reaction of CH₄ + O₃ → HOOO +CH₃. The geometries of all the stationary points are optimized at MPW1K/6‐31+G(d,p), MPWB1K/6‐31+G(d,p), and BHandHLYP/6‐31+G(d,p) levels of theory. The energies are refined at a multi‐high‐level method. The extended Arrhenius expression fitted from the CVT/SCT and μVT/Eckart rate constants of ozonolysis of methane in the temperature range 200–2500 K are k^CVT/SCT(T) = 5.96 × 10^?29T^4.49e^(?17321.3/T) and k^μVT/Eckart(T) = 7.92 × 10^?29T^4.46e^(?17301.7/T), respectively. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Imaging the Reaction Dynamics of O(3P)+CH4→OH+CH3

The title reaction was studied in a crossed‐beam experiment, in which the ground‐state methyl products were probed using a time‐sliced velocity‐imaging technique. By taking images over the energy range of chemical significance, from the threshold to about 15 kcal mol^?1, the reactive excitation function as well as the dependences of product angular distributions and of the energy disposal on initial collision energies were determined. All experimental data are consistent with the picture that the ground‐state reaction of O(³P)+CH₄ proceeds via a direct abstraction rebound‐type mechanism with a narrow cone of acceptance. Deeper insights into the underlying mechanism and the key feature of the potential‐energy surface are elucidated by comparing the results with the corresponding observables in the analogous Cl+CH₄ reaction.     

Measurement of the rate coefficient of the reaction CH+O2 → products in the temperature range 2200 to 2600 K

The rate coefficient of the reaction CH+O₂ → products was determined by measuring CH-radical concentration profiles in shock-heated 100–150 ppm ethane/1000 ppm O₂ mixtures in Ar using cw, narrow-linewidth laser absorption at 431.131 nm. Comparing the measured CH concentration profiles to ones calculated using a detailed kinetics model, yielded the following average value for the rate coefficient independent of temperature over the range 2200–2600 K: The experimental conditions were chosen such that the calculated profiles were sensitive mainly to the reactions CH+O₂ → products and CH₃+M → CH+H₂+M. For the methyl decomposition reaction channel, the following rate-coefficient expression provided the best fit of the measured CH profiles: Additionally, the rate coefficient of the reaction CH₂+H→CH+ H₂ was determined indirectly in the same system: © 1997 John Wiley & Sons, Inc.     

High-temperature rate constants for CH3OH + Kr --> products, OH + CH3OH --> products, OH + (CH3)(2)CO --> CH2COCH3 + H2O, and OH + CH3 --> CH) + H2O

The reflected shock tube technique with multipass absorption spectrometric detection of OH radicals at 308 nm (corresponding to a total path length of approximately 4.9 m) has been used to study the dissociation of methanol between 1591 and 2865 K. Rate constants for two product channels [CH3OH + Kr --> CH3 + OH + Kr (1) and CH3OH + Kr --> 1CH2 + H2O + Kr (2)] were determined. During the course of the study, it was necessary to determine several other rate constants that contributed to the profile fits. These include OH + CH3OH --> products, OH + (CH3)2CO --> CH2COCH3 + H2O, and OH + CH3 --> 1,3CH2 + H2O. The derived expressions, in units of cm(3) molecule(-1) s(-1), are k(1) = 9.33 x 10(-9) exp(-30857 K/T) for 1591-2287 K, k(2) = 3.27 x 10(-10) exp(-25946 K/T) for 1734-2287 K, kOH+CH3OH = 2.96 x 10-16T1.4434 exp(-57 K/T) for 210-1710 K, k(OH+(CH3)(2)CO) = (7.3 +/- 0.7) x 10(-12) for 1178-1299 K and k(OH+CH3) = (1.3 +/- 0.2) x 10(-11) for 1000-1200 K. With these values along with other well-established rate constants, a mechanism was used to obtain profile fits that agreed with experiment to within <+/-10%. The values obtained for reactions 1 and 2 are compared with earlier determinations and also with new theoretical calculations that are presented in the preceding article in this issue. These new calculations are in good agreement with the present data for both (1) and (2) and also for OH + CH3 --> products.     

Variational transition‐state theory study of the atmospheric reaction OH + O3 → HO2 + O2

We report variational transition‐state theory calculations for the OH + O₃→ HO₂ + O₂ reaction based on the recently reported double many‐body expansion potential energy surface for ground‐state HO₄ [Chem Phys Lett 2000, 331, 474]. The barrier height of 1.884 kcal mol^?1 is comparable to the value of 1.77–2.0 kcal mol^?1 suggested by experimental measurements, both much smaller than the value of 2.16–5.11 kcal mol^?1 predicted by previous ab initio calculations. The calculated rate constant shows good agreement with available experimental results and a previous theoretical dynamics prediction, thus implying that the previous ab initio calculations will significantly underestimate the rate constant. Variational and tunneling effects are found to be negligible over the temperature range 100–2000 K. The O₁? O₂ bond is shown to be spectator like during the reactive process, which confirms a previous theoretical dynamics prediction. © 2007 Wiley Periodicals, Inc. 39: 148–153, 2007     

A Shock Tube Study of H2 + OH → H2O + H Using OH Laser Absorption

The rate constant for the reaction of hydroxyl radicals (OH) with molecular hydrogen (H₂) was measured behind reflected shock waves using UV laser absorption of OH radicals near 306.69 nm. Test gas mixtures of H₂ and tert‐butyl hydroperoxide (TBHP) diluted in argon were shock‐heated to temperatures ranging from 902 to 1518 K at pressures of 1.15–1.52 atm. OH radicals were produced by rapid thermal decomposition of TBHP at high temperatures. The rate constant for the title reaction was inferred by best fitting the measured OH time histories with the simulated profiles from the comprehensive reaction mechanism of Wang et al. (USC‐Mech v2.0) (2007). The measured values can be expressed in the Arrhenius equation as k₁(T) = 4.38 × 10¹³ exp(–3518/T) cm³ mol^?1 s^?1 over the temperature range studied. A detailed error analysis was performed to estimate the overall uncertainty of the title reaction, and the estimated (2 – σ) uncertainties were found to be ±17% at 972 and 1228 K. The present measurements are in excellent agreement with the previous experimental studies from Frank and Just (Ber Bunsen‐Ges Phys Chem 1985, 89, 181–187), Michael and Sutherland (J Phys Chem 1988, 92, 3853–3857), Davidson et al. (Symp (Int) Combust 1988, 22, 1877–1885), Oldenborg et al. (J Phys Chem 1992, 96, 8426–8430), and Krasnoperov and Michael (J Phys Chem A 2004, 108, 5643–5648).In addition, the measured rate constant is in close accord with the non‐Arrhenius expression from GRI‐Mech 3.0 ( http://www.me.berkeley.edu/gri_mech/ ) and the theoretical calculation using semiclassical transition state theory from Nguyen et al. (Chem Phys Lett 2010, 499, 9–15).     

Kinetics and rate constants of the reaction CH2OH+O2-->CH2O+HO2 in the temperature range of 236-600 K

The kinetics and absolute rate constants of the gas-phase reaction of the hydroxymethyl radical (CH2OH) with molecular oxygen have been studied using laser photolysis/near-IR absorption spectroscopy. The reaction was tracked by monitoring the time-dependent changes in the production of the hydroperoxy radical (HO2) concentration. For sensitive detection of HO2, two-tone frequency modulation absorption spectroscopy was used in combination with a Herriott-type optical multipass absorption cell. Rate constants were determined as a function of temperature (236 K相似文献   

A consensus view of the temperature dependence of the gas phase reaction: OH + HBr → H2O + Br

The temperature dependence of the rate coefficient for the reaction, OH + HBr has been reinvestigated at low temperatures (T = 48–224 K) by using uniform supersonic flow reactors with laser induced fluorescence detection. This paper presents two forms of global fits: k(T) = 1.11 × 10^?11 (T/298)^?0.91 cm³ s^?1 and k(T) = 1.06 × 10^?11 (T/298)^?1.09 cm³ s^?1, both of which accurately describe the temperature dependence of the rate coefficient for the title reaction within the temperature range 20–350 K. These fits indicate that at temperatures below 200 K, the rate coefficient for this reaction shows inverse temperature dependence, while above 200 K the reaction shows insignificant temperature dependence. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 339–344, 2002     

Bayesian uncertainty quantification of recent shock tube determinations of the rate coefficient of reaction H + O2→ OH + O

We analyze the ignition delay in hydrogen–oxygen combustion and the important chain ‐branching reaction H + O₂→ OH + O that occurs behind the shock waves in shock tube experiments. We apply a stochastic Bayesian approach to quantify uncertainties in the theoretical model and experimental data. The approach involves a statistical inverse problem, which has four “components” as input information: (a) model, (b) prior joint probability density function (PDF) of the uncertain parameters, (c) experimental data, and (d) uncertainties in the scenario parameters. The solution of this statistical inverse problem is a posterior joint PDF of the uncertain parameters from which we can easily extract statistical information. We first perform a parametric study to investigate how the level of the total uncertainty (which we define as the sum of model uncertainty and experimental uncertainty) affects the uncertainty in the rate coefficient k₁ of the reaction H + O₂→ OH + O, which is “most likely” expressed by k₁=1.73×10²³T^?2.5exp(?11550/T) cm³ mol^?1 s^?1 over the experimental temperature range 1100–1472 K. We also introduce the idea of “irreducible” uncertainty when considering other parameters in the system. After statistically calibrating the parameters modeling the rate coefficient k₁, we predict its 95% confidence interval (CI) for different temperature regimes and compare the CI against the values of k₁ obtained deterministically. Our results show that a small uncertainty in gas temperature (±5 K) introduces appreciable uncertainty in k₁. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 586–597, 2012     

A quantum mechanical approach to the kinetics of the hydrogen abstraction reaction H2O2 + •OH → HO2 + H2O

The kinetics of the hydrogen abstraction from H₂O₂ by ^?OH has been modeled with MP2/6‐31G*//MP2/6‐31G*, MP2‐SAC//MP2/6‐31G*, MP2/6‐31+G**//MP2/6‐31+G**, MP2‐SAC// MP2/6‐31+G**, MP4(SDTQ)/6‐311G**//MP2/6‐31G*, CCSD(T)/6‐31G*//CCSD(T)/6‐31G*, CCSD(T)/6‐31G**//CCSD(T)/6‐31G**, CCSD(T)/6‐311++G**//MP2/6‐31G* in the gas phase. MD simulations have been used to generate initial geometries for the stationary points along the potential energy surface for hydrogen abstraction from H₂O₂. The effective fragment potential (EFP) has been used to optimize the relevant structures in solution. Furthermore, the IEFPCM model has been used for the supermolecules generated via MD calculations. IEFPCM/MP2/6‐31G* and IEFPCM/CCSD(T)/6‐31G* calculations have also been performed for structures without explicit water molecules. Experimentally, the rate constant for hydrogen abstraction by ^?OH drops from 1.75 × 10^?12 cm³ molecule^?1 s^?1 in the gas phase to 4.48 × 10^?14 cm³ molecule^?1 s^?1 in solution. The same trend has been reproduced best with MP4 (SDTQ)/6‐311G**//MP2/6‐31G* in the gas phase (0.415 × 10^?12 cm³ molecule^?1 s^?1) and with EFP (UHF/6‐31G*) in solution (3.23 × 10^?14 cm³ molecule^?1 s^?1). © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 502–514, 2005     

Ab initio study on the reaction of Sc+ + CH4 → Sc+(SINGLE BOND)CH2 + H2

An ab initio study on the reaction of the ground state (³D) and the excited state (¹D) of Sc⁺ with methane was performed. Reaction channels on the singlet and triplet potential surface (PES) and the reaction mechanism are examined and discussed. Three regions of the potential surface was studied: the molecular complex, the C(SINGLE BOND)H insertion products, and the transition states for the reaction. Comparisons between singlet and triplet PESs show that the excited state (¹D) of Sc⁺ has more reactivity with methane than does the ground state (³D) due to the spin quantum number conservation with the more stable insertion intermediate. © 1997 John Wiley & Sons, Inc.     

The decomposition of dimethyl peroxide and the rate constant for CH3O + O2 → CH2O + HO2

The decomposition of dimethyl peroxide (DMP) was studied in the presence and absence of added NO₂ to determine rate constants k₁ and k₂ in the temperature range of 391–432°K: The results reconcile the studies by Takezaki and Takeuchi, Hanst and Calvert, and Batt and McCulloch, giving log k₁(sec^?1) = (15.7 ± 0.5) - (37.1 ± 0.9)/2.3 RT and k₂ ≈ 5 × 10⁴M^?1· sec^?1. The disproportionation/recombination ratio k_7b/k_7a = 0.30 ± 0.05 was also determined: When O₂ was added to DMP mixtures containing NO₂, relative rate constants k₁₂/k_7a were obtained over the temperature range of 396–442°K: A review of literature data produced k_7a = 10^9.8±0.5M^?1·sec^?1, giving log k₁₂(M^?1·sec^?1) = (8.5 ± 1.5) - (4.0 ± 2.8)/2.3 RT, where most of the uncertainty is due to the limited temperature range of the experiments.