Double addition d'organometalliques sur des nitriles α-oxygenes R1 CN. Obtention d'amines primaires de type (R1RR')CNH2

Synthesis of the amines (R¹RR')CNH₂ (I) was carried out by the action of two organometallic compounds RM and R'M' on the α-oxygenated nitriles R¹ CN. Aliphatic and unhindered organolithium or α-ethylenic organomagnesium compounds must be used in the second addition. The nature of the two metallic atoms of the aminate (R¹RR')CN(MM'), precursor of the amine I, has an influence on the yield of this amine. If M = M' = Li an elimination reaction occurs and the amine I is obtained in low yields (2—34%). If M = Mg and M' = Li, the intermediate aminate is more stable, and the amine I is formed in good yields (48—75%). A mechanism explaining these results and the formation of by-products is proposed.     

Etude des propriétés de conduction électrique des polyphosphates: Li3Ba2(PO3)7, LiPb2(PO3)5, LiCs(PO3)2, et αLiK(PO3)2

The electrical conductivity of the crystallized polyphosphates Li₃Ba₂(PO₃)₇, LiPb₂(PO₃)₅, LiCs(PO₃)₂, and αLiK(PO₃)₂ has been determined at different temperatures by impedance spectroscopy. The conductivity, σ, spreads within a range of 1.59 × 10⁻⁸ to 1.79 × 10⁻⁷ S cm⁻¹ at 573 K, and from 1.71 × 10⁻⁵ to 9.86 × 10⁻⁴ S cm⁻¹ at 773 K. The transport should be assumed in the majority by the lithium ions with regard to the structural characteristics of these polyphosphates. The results are discussed and compared to the conductivity properties of other lithium ion conductors.     

Hydrogenolyse des disilanes issus de la synthese industrielle des methylchlorosilanes. Obtention de MeSiHCl2 et Me2SiHCl

The chlorodisilane residue from the industrial synthesis of methylchlorosilanes is cleaved under hydrogen (25 bars) in the presence of HMPT/nickelocene mixture or nickel (resulting from the reduction of dry NiCl₂ by Et₃SiH) and leads to the formation of methyldichlorosilane (noble product), to the detriment of the methyltrichlorosilane (much less noble). This reaction also gives an appreciable amount of the rare and very useful dimethylchlorosilane.     

Transition de phases observee par measures optiques sur des monocristaux de SrAlF5 et de Pb3(CrF6)2

Optical measurements have been performed on SrAlF₅ and Pb₃(CrF₆)₂ crystals elaborated by a Bridgman technique. The thermal dependence of the birefringence shows anomalies which correspond to ferroelectric-paraelectric transitions. The transitions are of first order, the tetragonal crystal symmetry is not modified.     

A convenient synthesis of Fe(CO)2(η-S2CNMe2)2 and Fe(η-S2CNMe2)2 from the monodentate dithiocarbamato derivative, [(η-C5H5)(CO)3W(η-SCSNMe2)] and Fe2(CO)9

A high yield synthesis of the carbonyl dithiocarbamato derivative Fe(CO)₂(η²-S₂CNMe₂)₂ and Fe(η²-S₂CNMe₂)₂ by photolysis with visible light of solutions containing Fe₂(CO)₉ or Fe₃(CO)₁₂ and [(η⁵-C₅H₅)(CO)₃W(η¹-SCSNMe₂)] is reported.     

Cyclopentadienyl-ruthenium and -osmium chemistry : XXXIX. Syntheses of novel alkynyl-ruthenium complexes. X-Ray structures of two forms of {Ru(PPh3)2(η-C5H5)}2(μ-C4) and of Ru{CCC(O)Me}(PPh3)2(η-C5H5)

Reactions between [Ru(thf)(PPh₃)₂(η-C₅H₅)]⁺ and lithium acetylides have given further examples of substituted ethynylruthenium complexes that are useful precursors of allenylidene and cumulenylidene derivatives. From Li₂C₄, mono- and bi-nuclear ruthenium complexes were obtained: single-crystal X-ray studies have characterised two rotamers of {Ru(PPh₃)₂(η-C₅H₅)}₂(μ-C₄), which differ in the relative cis and trans orientations of the RuL_n groups. Protonation of Ru(CCCCH)(PPh₃)₂(η-C₅H₅) afforded the butatrienylidene cation [Ru(C=C=C=CH₂)(PPh₃)₂(η-C₅H₅)]⁺, which reacted readily with atmospheric moisture to give the acetylethynyl complex Ru{CCC(O)Me}(PPh₃)₂(η-C₅H₅), also fully characterised by an X-ray structural study.     

Formation of β- and β″-Al2O3 by the solid state reaction between NaAlO2 and γ-Al2O3

The solid state reaction of NaAlO₂ with γ-Al₂O₃ was investigated kinetically. Powdered compacts with various compositions (Al₂O₃/NaAlO₂ = 1–5) were fired at 700–1200°C for 1–768 hr. The amounts of the reaction product were determined by peak heights of X-ray diffraction patterns. β″-Al₂O₃ was formed predominantly from the sample with Al₂O₃/NaAlO₂ = 2. The firing time for the β″-Al₂O₃ formation was shortened as the firing temperature was raised, and the activation energy, E_a, for formation was about 130–135 kcal/mole. The sample of Al₂O₃/NaAlO₂ = 5 formed m-Al₂O₃ with the mullite structure and was observed to transform gradually to β-Al₂O₃. E_a for the m-Al₂O₃ formation and for the transition were about 55–60 and 40 kcal/mole, respectively, which resulted in E_a of about 95–100 kcal/mole for the β-Al₂O₃ formation. The mechanism of the m-Al₂O₃ formation is discussed briefly.     

First examples of η- and η --- η-coordination in triphosphorus analogues of ferrocene. Crystal structure of the iron sandwich complex [Fe(η-C5H5) (η-C2R2P3)W (CO)5] (R = Bu)

Syntheses of the novel sandwich compounds [Fe(η⁵-C₅H₅)(η⁵-C₂R₂P₃)] and [Fe(η⁵-C₅H₅)(η⁵-C₂R₂P₃)W(CO)₅], (R = Bu^t), are described. The mode of attachment of the [W(CO)₅] fragment in the latter compound has been determined by NMR and single crystal X-ray diffraction studies.     

Synthesis and Anti-inflammatory Action of （η-C5H5 ）2Ti（ Sal）2 and （η-C5H5 ）2Ti（Clo）2

IntroductionSince K pf[1]discovered that dicyclopenta die-nyltitanium dichloride possesses antitumour action in1979,a large number of cyclopentadienyltitanium com-plexes with different substituents have been synthe-sized[2,3].The experimental data reveal …     

Obtention de complexes du platine(II) du type [PtCl2(amine)L] par rupture des dimeres pontes [Pt2Cl4(amine)2]

Opening of chlorine-bridged amine dimers of platinum(II) by various ligands L yields quantitatively complexes of general formula [PtCl₂(amine)L] with a cis configuration in most cases. Cis olefinic complexes may be easily obtained by this method, together with compounds having L as a weak ligand. For the reactions of two-sites ligandsd (nitrogen—olefin), the determining factor seems to be correlated to the nucleophilicity of the binding site; platinum always coordinates at the nitrogen atom of the nitrogen unsaturated ligands which have been studied.     

Luminescence de l'europium divalent dans les composés α- et β-RbLu3F10

The effect of the crystal structure upon the luminescence of the divalent europium within the RbLu₃F₁₀ dimorphous matrix has been investigated. The obtained results essentially show that the difference between the rubidium coordination numbers in both α- and β-RbLu₃F₁₀ phases (15 or 16 and 8 or 10 respectively) is responsible for the change over from a 4f⁷ → 4f⁷ emission to a 4f⁶5d¹ → 4f⁷ emission.     

Acetylen-Komplexe von Di(η-cyclopentadienyl)molybdän: Synthesen und Protonierung. Struktur von [Cp2MoH{η-C2(SiMe3)2}]PF6

Cp₂MoH₂ reacts with methyl acrylate in the presence of acetylenes (L = C₂H₂, C₂Me₂, HCC^tBu, HCCSiMe₃, C₂(SiMe₃)₂, HCCCH₂OMe, HCCCH₂NMe₂) to form acetylene complexes Cp₂Mo(L) 5. Protonation takes place with CF₃CO₂H at −80°C to give short-lived cations [Cp₂MoH(L)⁺ (8) (L = C₂Me₂, HCCSiMe₃, C₂(SiMe₃)₂). The structure of [Cp₂MoH{η²-C₂(SiMe₃)₂}]PF₆(9) was determined by an X-ray diffraction study.     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

Syntheses d'α,β-fluoroamines et d'α-fluorocetones par action de l'acide fluorhydrique sur des aziridines et des azirines

Addition of hydrogen fluoride to phenyl aziridines gives α,β-fluoroamines. Regioselectivity and stereochemistry of the reaction are discussed. Phenyl azirines add hydrogen fluoride to give, after hydrolysis, α-fluoroketones.     

About SnF2 stannous fluoride. I. Crystallochemistry of α-SnF2

The crystal structure of monoclinic stannous fluoride α-SnF₂ has been refined from single-crystal X-ray data. The unit cell contains four cyclic Sn₄F₈ tetramers. The structure contains two types of Sn atoms: Sn(1) is surrounded tetrahedrally by three fluorine atoms and a lone pair, E, and Sn(2) is surrounded octahedrally by five fluorine atoms and a lone pair. The structure is examined within the framework of Galy's and Brown's models. Topological relationships to rutile are presented.     

Ein beitrag zur darstellung und reaktivität der η-allyliridium-komplexe [Ir(η-2-RC3H4) (PPr3)2]

The η³-allyliridium complexes [Ir(η³-2-RC₃H₄)(PⁱPr₃)₂] (2, 3) have been prepared in a one-pot reaction from [IrCl(C₂H₄)₂]₂, 2-RC₃H₄Li and PⁱPr₃ in 70% yield. Compounds 2 and 3 react spontaneously with H₂ to give [IrH₅(PⁱPr₃)₂] (7) and with excess PhC=CH and MeCCH to give [Ir(CCPh)₃(PⁱPr₃)₂] (5) and [Ir(CCMe)₂(CMe=CH₂)(PⁱPr₃)₂] (6), respectively. From 2 (or 3) and two equivalents of PhCCH the complex [IrH(CCPh)₂(PⁱPr₃)₂] (4) has been obtained. Treatment of 2 or 3 with CF₃CO₂H does not lead to a cleavage of the allyl-metal bond but affords the allyl(hydrido)-iridium(III) complexes [IrH(η³-2-RC₃H₄)(η¹-P₂CCF₃)(PⁱPr₃)₂] (8, 9) in almost quantitative yield.     

Electrochemical reduction of the dithiophosphate complexes CpFe(CO)2[η-SP(S)(OR)2], (Cp = η-C5H5 or η-C5Me5)

The reductive electrochemistry of compounds of the type CpFe(CO)₂L (Cp = η-C₅H₅, η-C₅Me₅; L = SP(S)(OEt)₂, SP(S)(OⁱPr)₂) has been examined by polarography, cylic voltammetry and coulometry. The first one-electron reduction step leads to a bond rupture process with formation of a mercury compound, [CpFe(CO)₂]₂Hg, at a mercury electrode and the corresponding dimer species at a platinum electrode. The second reduction step corresponds to the reduction of the dimer [CpFe(CO)₂]₂, except in the polarographic reduction of pentamethylcyclopentadienyl compounds.     

Thermochemistry of addition of C2(CN)4 to Pt(PMe2Ph)2CH3Cl and Pt(PPh3)2HCl

The enthalpies of reactions 1 and 2 have been measured as ΔH(1) = ?142 ± 6 and ΔH(2) = ?112 ± 6 kJ mol^?1 to determine whether thermochemical factors are a major influence in the formation of different reaction products (tcne = tetracyanoethylene).

     

Synthesis and derivative chemistry of [Ru2(μ-PPh2) (μ-OH) 2(μ-p-cymene) 2]

The cationic diphenylphosphido-bridged compound [Ru₂(μ-PPh₂)(μ-OH)₂(η⁶-p-cymene)₂][PF₆) (2) has been prepared by reaction of the tri-μ-hydroxo complex [Ru₂(μ-OH)₃(η-p-cymene)₂][PF₆] (1) with diphenylphosphine. Complex 2 eliminates water on reaction with protic acids, incorporating the conjugate base of the added acid as a bridging ligand. Formic acid, acetic acid, phenol, and aniline react with 2 to give the monosubstituted compounds [Ru₂(μ-PPh₂)(μ-OH)(μ-L)(η⁶-p-cymene)₂]PF₆] (L = HCO₂, MeCO₂, OPh, or NHPH), whereas methanol, thiophenol, 1,2-benzenedithiol, hydrochloric acid and isopropanol afford the disubstituted derivatives [Ru₂(μ-PPh₂)(μ-L)₂(η⁶-p-cymene)₂]PF₆] (L = OMe, SPh, S₂C₆H₄, Cl, or H).