Kinetics and mechanism of the photoinitiated autoxidation of sulfur(IV) in the presence of iodide ion

The kinetics and mechanism of the photoinitiated and iodide ion-catalyzed aqueous autoxidation of sulfur(IV) has been studied in a diode-array spectrophotometer using the same light beam for excitation and detection. Light absorption of both the iodide ion and sulfur(IV) contribute to the initiation of a highly efficient radical chain reaction, the overall rate of which depends on the reactant and catalyst concentrations, the pH, and the light intensity in a complex manner. To interpret all the experimental findings, an elaborate scheme is proposed, in which the chain carriers are SO3-*, SO4-*, SO5-*, I*, and I2-*. There are three termination steps, each of them is second-order with respect to the chain carriers. Model calculations and nonlinear fitting have been used to show that the proposed scheme gives an excellent quantitative interpretation of the experimental results.     

Sulfite induced autoxidation of NiII and CoII tetraglycine complexes. Spectrophotometric and rotating ring-disc voltammetric studies

The oxidation of Ni(II) and Co(II) tetraglycine complexes in borate buffer aqueous solution, by dissolved oxygen, is strongly accelerated by sulfite. The formation of Ni(III) and Co(III) complexes with maximum absorbances at 327 and 265 nm, respectively, was followed by spectrophotometric measurements. Ni(III) formation was also characterized by voltammetry at low temperatures, whose anodic and cathodic components were observed in the recorded voltammograms. Spectra and rotating ring-disc voltammograms, recorded at various rotation speed values, showed that the Ni(III) species decomposes. The electrochemical process related to the couple Co(II)/Co(III), in a medium containing tetraglycine, was not reversible. In both Ni(II) and Co(II) complexes the metal ion oxidation in the presence of oxygen and sulfite involves the reduction of some initial Ni(III) or Co(III) by sulfite to produce the SO(3).- radical, which rapidly reacts with dissolved oxygen to produce SO(5).-, which then oxidizes Ni(II) or Co(II).     

The fidelity of spin trapping with DMPO in biological systems

Unlike direct ESR, spin trap methodology depends on the absolute fidelity of the spin trap reaction. Two alternative reactions of 5,5-dimethyl-1-pyrroline N-oxide (DMPO) leading to radical adduct artifacts have been discovered and investigated: inverted spin trapping and the Forrester-Hepburn nucleophilic mechanism. These two alternate pathways to radical adducts are a combination of one-electron oxidation and nucleophilic addition, in either order. In biological systems, serious artifacts have been reported due to the Forrester-Hepburn mechanism, which is initiated by the addition of a nucleophile to DMPO. It has recently been demonstrated that (bi)sulfite (hydrated sulfur dioxide) can react with DMPO via a nonradical, nucleophilic reaction, and it has been further proposed that DMPO/(?)SO(3)(-) formation in biological systems is an artifact and not the result of spin trapping of sulfur trioxide anion radical ((?)SO(3)(-)). The one-electron oxidation of (bi)sulfite catalyzed by horseradish peroxidase (HRP)/hydrogen peroxide (H(2)O(2)) has been reinvestigated by ESR spin trapping with DMPO and oxygen uptake studies to obtain further evidence for the radical reaction mechanism. In the absence of DMPO, the initial rate of (bi)sulfite-dependent oxygen and H(2)O(2) consumption was determined to be half of the initial rate of DMPO/(?)SO(3)(-) radical adduct formation as determined by ESR, demonstrating that, under our experimental conditions, DMPO exclusively forms the radical adduct by trapping the (?)SO(3)(-).     

Kinetics of the light-driven aqueous autoxidation of sulfur(IV) in the absence and presence of iron(II)

The photochemical autoxidation of aqueous, acidic sulfur(IV) solutions was studied in the absence and presence of iron(II) by a newly introduced technique using a diode-array spectrophotometer, in which the same light source is used to drive and detect the reaction. Based on detailed kinetic and stoichiometric data sets, a non-chain mechanism is proposed for the autoxidation of sulfur(IV). In this mechanism, excited hydrated sulfur dioxide, *H2O.SO2, first reacts with O2 to form peroxomonosulfate ion, HSO5-, which rapidly oxidizes another H2O.SO2 to give hydrogensulfate ion as a final product. In the presence of iron(II), the formation of iron(III) was detected, which can be interpreted through the simultaneous contribution of two additional pathways: some of the HSO5- formed oxidizes iron(II) instead of sulfur(iv), and *H2O.SO2 also reacts directly with iron(II) to yield iron(III). This mechanism provides a sufficient quantitative interpretation of all experimental observations.     

间接荧光检测离子色谱法分析维生素C、亚硫酸根和硫代硫酸根

报道了一种用离子色谱分析维生素Ｃ、亚硫酸根和硫代硫酸根离子的新方法。在这种方法中采用了四价铈柱后氧化还原反应和三价铈荧光检测法。同时也给出了使用这种方法的一些最佳的实验条件。     

Polymerization of acrylamide and methacrylamide photoinitiated by azidopentamminecobalt(III) chloride

The kinetics of polymerization of acrylamide and methacrylamide, photoinitiated by azidopentamminecobalt(III) chloride in homogeneous aqueous acid medium was studied systematically. Monochromatic wavelengths 365, 405, and 435 mμ were employed for irradiation. Polymerization proceeded without any induction period, and the reaction was followed by measurements of rate of monomer disappearance (bromometrically), rate of complex disappearance (spectrophotometrically), and the chain lengths of the polymer formed (viscometrically). The dependences of the rate of polymerization on variables like light intensity, light absorption fraction by the complex, wavelength, monomer concentration, hydrogen ion concentration, nature of the acid used (HClO₄, HNO₃, and H₂SO₄), etc., were studied. The rate of polymerization of acrylamide depended on the unit power of monomer concentration and on the square root of light absorption fraction k_ε and light intensity I. The rate of methacrylamide polymerization was proportional to the unit power of monomer concentration and fractional powers of 0.25 and 0.30 of k_ε and I, respectively. A kinetic reaction scheme is proposed and discussed in the light of the experimental results, and it has been concluded that (1) the primary photochemical act is an electron transfer reaction from the azide ion to Co(III) in the complex, (2) initiation of polymerization is by azide radical, (3) termination is by mutual destruction of polymer radicals.     

Polymerization of acrylamide and acrylic acid photoinitiated by diazidotetramminecobalt (III) azide

The kinetics of polymerization of acrylamide and acrylic acid in aqueous solution photoinitiated by the complex, diazidotetramminecobalt(III) was systematically studied at 35°C and pH = 3. Monochromatic radiation at γ = 365, 405, and 435 mμ was employed. The kinetics of polymerization were followed by measurements of the rates of monomer disappearance (bromometrically) and complex disappearance (spectrophotometrically) and the chainlengths of the polymers formed (viscometrically). The dependences of the rate of polymerization on variables like light intensity, light absorption by the complex, wavelength, monomer concentration, and hydrogen ion concentration were studied. The rates of polymerization of acrylamide and acrylic acid were found to be propertional to the square of the monomer concentration and to the first power of light absorption fraction k_e and light intensity I. A kinetic scheme is proposed in the light of experimental results involving (1) a primary photochemical act of excitation of the complex, followed by the dark reaction of electron transfer within the complex producing the azide radical; (2) initiation of polymerization by the azide radical; (3) termination of the chain process by the complex molecule.     

Riboflavin-sensitized photochemical radical ion chain reaction of sulfo-group substitution for halogen in halogenated hydroxynaphthalenes

It was shown that riboflavin (RF) is a sensitizer for the radical ion chain reaction of sulfo group substitution for halogen in halogenated hydroxynaphthalenes. The initaition mechanism involves the electron transfer reaction between the sulfite ion and excited riboflavin. The quantum yields of RF radical anions from the singlet and the triplet states upon excitation in an aqueous sodium sulfite solution are 0.01 and 0.15, respectively, as determined by means of flash photolysis. The principal decay reaction for RF radical anions is their recombination with sulfite radical anions in the bulk of solution at a rate constant of (3.8 ± 0.5) × 10⁹ dm³ mol^?1 s^?1. The quantum yields of the riboflavin-sensitized substitution reaction increases in the presence of electron scavengers (chloranil, dinitrobenzene) and inorganic salts in the system.     

Indirect fluorometric determination of diclofenac sodium.

A simple and easy method of analysis for diclofenac sodium is reported. A spectrofluorometric method for the microdetermination of diclofenac sodium has been developed through its reaction with cerium(IV) in an acidic solution and measurement of the fluorescence of the Ce(III) ions produced. Under the optimum experimental conditions for the oxidation reaction, 1.0 M H2SO4 with 90 min of heating time (100 degrees C), the range of application is 124.3-600 ng mL(-1) and the limit of detection is 72.7 ng mL(-1). The proposed method was applied to the determination of diclofenac sodium in pharmaceutical tablets. The results of the analysis show a good agreement with those obtained by the official USP 27 HPLC method.     

Laser flash photolysis study of the photocatalytic step of the photo-fenton reaction in saline solution

The photo-Fenton reaction (Fe2+/Fe3+, H2O2, UV light) is strongly inhibited by high concentrations of added chloride ion. In this work, the effect of added chloride ion on the photocatalytic step that converts Fe(III) back to Fe(II) is studied by nanosecond laser flash photolysis over a wide range of pH (1.0-3.3) and concentrations of Fe(III) (0.1-1.0 mM) and chloride ion (0.05-0.75 M). An explicit mechanistic model based on the preferential formation of the less-reactive Cl2*- radical anion via two routes (competitive photolysis of the iron(III)-chloride complex to chlorine atoms instead of the desired hydroxyl radical and pH-dependent scavenging of the hydroxyl radical by chloride ion) is proposed. This model, which fits the laser flash photolysis data for the production and decay of Cl2*- over the entire range of conditions investigated, suggests that inhibition of the photocatalytic step of the photo-Fenton process in the presence of chloride ion can be circumvented by maintaining the pH of the medium at or slightly above 3.0 throughout the reaction.     

Chloride and iodide mediated oxidation of antimony(III) by cerium(IV) in aqueous sulphuric acid medium

The micro amounts of iodide (10⁻⁷) (mol dm⁻³) and chloride (10⁻²) (mol dm⁻³) mediated oxidation of antimony(III) by cerium(IV) in an aqueous sulphuric acid medium have been studied spectrophotometrically at 25 °C and μ = 3.10 mol dm⁻³. The stoichiometry is 1:2 in chloride and iodide mediated reactions. i.e. one mole of antimony(III) requires two moles of cerium(IV). In the case of chloride mediated reaction, the reaction was first order in cerium(IV) and halide concentrations, whereas in the case of iodide mediated reaction the order with respect to [cerium(IV)] was unity and with respect to iodide concentrations was more than unity (ca. 1.4). In both chloride and iodide mediated reactions the order with respect to antimony(III) concentrations was less than unity. Increase in sulphuric acid concentration increased the rate. The order with respect to H⁺ ion concentration was less than unity. Added products, cerium(III) and antimony(V) did not have any significant effect on the reaction rate. The active species of oxidant was understood to be , whereas that of reductant as SbCl₃ in the case of chloride and SbI²⁺ in case of iodide mediated reactions. The possible reaction mechanisms were proposed and the activation parameters were determined and discussed.     

铱（III）离子催化铈（IV）离子氧化异丁醇的反应动力学及机理

在酸性介质中用氧化还原滴定法研究了铈（IV）离子在痕量铱（III）离子催化作用下,于25～40 ℃区间氧化异丁醇（BA）的反应动力学.结果表明反应对铈（IV）离子为一级,对异丁醇的表观反应级数为正分数.准一级速率常数kobs随[H＋]及催化剂[Ir(Ⅲ)]增加而增大,随[HSO4-]增加而减小.在氮气保护下,反应不能引发丙烯酰胺聚合,说明在反应中没有自由基产生.提出了催化剂、底物和氧化剂间生成双核加合物的反应机理,通过kobs与HSO4-的依赖关系,找到本反应体系的动力学活性物种是Ce(SO4)2＋,并计算出平衡常数、速控步骤的速率常数及相应的活化参数.     

CdS Nanoparticle Photocatalysis of the Chain Oxidation of Sulfite Ions by Molecular Oxygen

High photocatalytic activity was found for colloidal cadmium sulfide nanoparticles in the radical chain oxidation of sulfite ions by molecular oxygen in aqueous solution. The kinetics of this reaction was studied and a mechanism was proposed, which is in satisfactory accord with the experimental data.     

The salt effect on riboflavin-photosensitized substitution of the sulfo group for bromine in 1-bromo-2-hydroxynaphthalene

It was shown that the substitution reaction of the sulfo group for bromine in 1-bromo-2-hydroxynaphthalene photosensitized with riboflavin occurred via the riboflavin triplet state. Electron-donor anions quench the fluorescence of riboflavin. Halide (iodide and bromide) ions increase the quantum yield of the substitution reaction at low concentrations because of an increase in the spin-orbital coupling in the radical ion pair generated in riboflavin fluorescence quenching. As a result of the spin-orbital conversion, the triplet-state radical ion pair is formed, which separates into the riboflavin radical anion and the halogen atom. The halogen atom is reduced by the sulfite ions with the simultaneous formation of the sulfite radical anions, which participate in the propagation of the substitution reaction chain. All salts increase the quantum yield of the substitution reaction at high concentrations (>0.5 mol l^?1).     

Synergistic effect of Ni(II) and Co(II) ions on the sulfite induced autoxidation of Cu(II)/tetraglycine complex

The synergistic effect of Ni(II) and Co(II) on the sulfite induced autoxidation of Cu(II)/tetraglycine was investigated spectrophotometrically at 25.0 degrees C, pH = 9.0, 1 x 10(-5) mol dm(-3) < or = [S(IV)] < or = 8 x 10(-5) mol dm(-3), [Cu(II)]= 1 x 10(-3) mol dm(-3), 1 x 10(-6) mol dm(-3) < or = [Ni(II)] or [Co(II)] < or = 1 x 10(-4) mol dm(-3), [O2] approximately 2.5 x 10(-4) mol dm(-3), and 0.1 mol dm(-3) ionic strength. In the absence of added nickel(II) or cobalt(II), the kinetic traces of Cu(III)G4 formation show a large induction period (about 3 h). The addition of trace amounts of Ni(II) or Co(II) increases the reaction rate significantly and the induction period drastically decreases (less than 0.5 s). The effectiveness of Cu(III)G4 formation becomes much higher. The metal ion in the trivalent oxidation state rapidly oxidizes SO3(2-) to SO3*-, which reacts with oxygen to produce SO5*-. The strongly generated oxidants oxidize Cu(II)G4 to Cu(III).     

Cathodic reduction of bisulfite and sulfur dioxide in aqueous solutions on copper electrodes: an electrochemical ESR study

The electrochemical reduction of aqueous solutions of sulfite under acidic conditions on copper electrodes is reported, and a mechanism is proposed. Cyclic voltammetry at a copper disk suggests the operation of two reduction processes, the dominant process depending on solution pH. At very low pH (0-2), sulfur dioxide is reduced in a two-electron, two-proton reaction, but at higher pH (2-5), bisulfite is the electroactive species, being reduced by a single electron to ultimately yield the SO2*- radical anion. Simultaneous electrochemical electron spin resonance (ESR) measurements using a tubular flow cell support this proposal, and suggest that the radical anion is in equilibrium with dithionite, which is found to decay at low pH. Digisim modeling of the system is shown to be consistent with this mechanism over the experimental pH range.     

还原性负离子的间接荧光检测离子色谱法

采用４个铈柱后反应和３价铈荧光检测的离子色谱法分离维生素Ｃ,亚硝酸根,硫代硫酸根,亚硫酸根,草酸根和碘离子６种还原性负离子,同时也给出了使用这种方法的一些最佳条件。     

Spectrophotometric determination of cerium(IV), arsenic(III), and nitrite with promazine hydrochloride

Promazine hydrochloride is proposed as a new reagent for the spectrophotometric determination of cerium(IV), arsenic(III), and nitrite. The reagent forms a red-colored radical with cerium(IV) instantaneously in 0.5?2 M sulfuric acid or 0.5?2.5 M phosphoric acid solution. The red radical exhibits maximum absorbance at 505 nm. An 11-fold molar excess of the reagent is necessary for the full development of the color intensity. Beer's law is valid over the concentration range 0.5–15 ppm in sulfuric acid and 0.5–21 ppm in phosphoric acid. The sensitivities of the reaction in sulfuric and phosphoric acid media are 0.022 and 0.019 μg/cm², respectively. The effects of acidity, time, order of addition of reagents, temperature, reagent concentration, and diverse ions are reported. The proposed method offers the advantages of good sensitivity, simplicity, rapidity, selectivity, and a wider range of determination without the need for extraction. Arsenic(III) and nitrite are indirectly determined.     

Spectrophotometric determination of sulfide in the presence of sulfite and thiosulfate via the precipitation of bismuth(III) sulfide.

A photometric method has been developed for the determination of sulfide at 10(-5) mol dm(-3) levels, which is based on the reaction of sulfide with a given excess amount of bismuth(III) to form a precipitate of bismuth(III) sulfide and on the spectrophotometric measurement of the residual bismuth(III) at 335 nm after extracting with bismuthiol II reagent from an aqueous solution containing acetate buffer into benzene. The presence of sulfite and thiosulfate up to 0.002 mol dm(-3) did not cause any interference in the determination of sulfide, because both sulfite and thiosulfate do not produce any precipitate with bismuth(III). A linear calibration plot with a negative slope was obtained for sulfide over the range of 5.00 x 10(-7) - 3.00 x 10(-5) mol dm(-3) (16.0 - 960 ppb). An experimental calibration plot was in accord with the theoretical plot, taking into account the known excess of bismuth(III), showing that the reaction of sulfide with bismuth(III) proceeded to completion. The relative standard deviation of results from 10 replicate determinations of standard sulfide (2.00 x 10(-5) mol dm(-3)) was 0.44%. The proposed method was successfully applied to the determination of sulfide in hotspring water samples without any pretreatment.     

DITHIONITE TREATMENT OF FLAVINS: SPECTRAL EVIDENCE FOR COVALENT ADDUCT FORMATION and EFFECT ON in vitro BACTERIAL BIOLUMINESCENCE

Intrigued by the apparent requirement of dithionite for FMN reduction (as opposed to photoreduction or catalytic hydrogenation) in the H2O2-initiated bacterial bioluminescence reaction, we chose 5-ethyl-3-methyllumiflavinium cation I as a model to investigate possible flavin adduct formation by treatment with dithionite or (bi)sulfite. In the range of pH 5-8, the reaction of dithionite with 5-ethyl-3-methyllumiflavinium cation, which is in equilibrium with the 5-ethyl-4a-hydroxy-3-methyl-4a, 5-dihydrolumiflavin pseudobase II (X = OH), is not limited to the formation of flavosemiquinone and dihydroflavin following two one-electron steps. Several parallel and sequential reactions may take place involving the intermediacy of covalent flavin adducts. Addition of (bi)sulfite gave a 4a-sulfiteflavin adduct II (X = SO3-). Consistent with the S2O4(2-) in equilibrium with 2 SO2-. equilibrium, the reaction of dithionite and II (X = OH; SO3-) gave rise to two flavin adducts in competitive nucleophilic displacements: a 4a-sulfoxylate-flavin radical (II, X = SO2.) and a 4a-dithioniteflavin adduct (II, X = S2O4-), respectively. On increasing the (S2O4(2-), SO2.-)/flavin ratio under N2, the formation of the 4a-sulfoxylate-flavin radical became predominant. The II (X = SO2.) so formed was in equilibrium with the flavosemiquinone and bisulfate and can be trapped by reacting with hydroxylamine. In the initial presence of oxygen, II (X = SO2.) was highly reactive toward O2, giving a fast oxidation to II (X = SO3-) and effectively suppressing the formation of the flavosemiquinone.(ABSTRACT TRUNCATED AT 250 WORDS)