Trace elemental characterization of edible oils by ICP-AES and GFAAS

A method for the determination of the inorganic profile in edible oils is proposed. The quantification of selected metals in various oils (olive, pumpkin seed, sunflower, sesame seed, hazelnut, grape, soya, rice oil) was carried out using microwave assisted digestion followed by ICP-AES and GFAAS. The detection power of the ICP-AES technique was sufficient for the determination of Ca, Fe, Mg, Na, and Zn. Since the samples contained very low amounts of Al, Cu, Co, Cr, K, Ni, Mn, and Pb, these elements were measured by GFAAS. Differences of metal concentrations for edible oils obtained in this preliminary study represent a starting basis for the development of an additional analytical procedure applicable for oil characterization.     

Multi-element analysis of Ghanaian crude oils by instrumental neutron activation analysis

Instrumental neutron activation analysis based on thermal neutrons from the Ghana Research Reactor-1 facility was utilized to analyze 18 trace elements namely Al, As, Br, Ca, Cd, Cl, Co, Cu, Fe, K, Mg, Mn, Na, Ni, S, Si, V, and Zn in two different crude oil samples from the Saltpond and Jubilee field in the Saltpond, Central region and Cape Three Points, Western region of Ghana, respectively. The sulfur concentration for both samples were low and within globally accepted range of 0.1–0.5%wt for sweet crude oil. The results of the elemental analysis showed that the two samples are relatively low in trace element concentrations compared to crude oils of other countries. Higher Fe concentration in the Jubilee crude oil indicates younger oil. The V/Ni ratios obtained for crude oils from both locations imply a possible marine organic origin and also suggest the Saltpond crude oil is more matured than the Jubilee crude oil.     

Determination of trace elements of some Egyptian crops by instrumental neutron activation,inductively coupled plasma-atomic emission spectrometric and flameless atomic absorption spectrophotometric analysis

Instrumental neutron activation analysis was used for the determination of Al, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Ti, Th, V and Zn, ICP-AES for the determination Al, Ag, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, P, Sc, Sr, Ti, V and Zn and flameless AAS for the determination of Cd, Hg and Pb in egg plant, potatoes, green pepper (Leguminosae), vegetable marrow (Cucurbitaceae), pears, apple (Rosaceae), castor oil plant (Euphorbiaceae), lettuce (compositae), dill, parsley, coriander (Umbelliferae), and in some soil samples collected from Aswan province.     

A trace element study of commercial infant milk and cereal formulas

Three commercial infant milk formulas, one commercial infant cereal formula and one locally grown cereal used for infant feeding in Nigeria were analyzed for 17 trace elements, viz: Al, As, Br, Ca, Ce, Cl, Co, Cr, Fe, K, Mg, Mn, Na, Rb, Sb, Se and Zn. The commercial milk formulas contain adequate amounts of Ca, Cl, Co, Fe, K, Mg, Mn, Na and Zn, the locally grown cereal contains adequate amounts of Co, K, Mg, Mn and Zn and low in Ca, Cl, Fe and Na while the commercial cereal has adequate amounts of Ca, Cl, Co, K, Mg, Na and Zn. None of the samples analyzed was found to contain any elements up to threshold toxicity limits of concentrations.     

微波辅助消解-电感耦合等离子体原子发射光谱法(ICP-AES)测定几种血藤中17种元素

建立电感耦合等离子体原子发射光谱法(ICP-AES)测定血藤类中药中K,Ca,Mg,P,Sr,Fe,Mn,Zn,Cu,Co,Cr,Al,Ba,Ni,As,Pb和Cd 17种常量和微量元素含量的分析方法。样品用微波辅助消解,ICP-AES法检测几种血藤中17种元素的含量,方法的检出限为0.000 03~0.009 81μg/mL,加标回收率88.37%~110.00%,相对标准偏差(RSD)均小于5.0%,方法可快速、灵敏、准确测定血藤类中药中多种常量、微量元素的含量。血藤样品中除含有人体必需的常量元素K,Ca,Mg外,还含有Fe,Zn,Mn,Cr,Co等必需的微量元素和其它元素P,Ni,Ba,Al,Sr,Pb,Cd,Ba等。     

Determination and geochemical significance of trace elements in Iraqi crude oils using instrumental neutron activation analysis

The trace-element composition of crude oil was studied using instrumental neutron activation techniques and a large-volume high-resolution Ge(Li) detector. A total of 29 elements were determined in oils representing the various producing formations of the Iraqi oil fields. These were: Al, Ar, As, Au, Br, Ca, Cl, Co, Cr, Cu, Eu, Fe, Ga, Hg, K, La, Mn, Mo, Na, Ni, Re, S, Sb, Sc, Se, Sm, V, W and Zn. The significance of these trace elements in the geochemical investigation of crude oil is discussed.     

Direct determination of trace elements in niobium,tantalum and their oxides by inductively coupled plasma atomic emission spectrometry after microwave dissolution

Analytical schemes for the determination of trace elements in high-purity niobium, tantalum and their oxides are proposed. The schemes are based on microwave dissolution of the metals and oxides followed by inductively coupled plasma atomic emission spectrometry (ICP-AES) determination of impurities in the solutions. The possibilities of interelement and off-peak background corrections in ICP-AES analysis are discussed. The accuracy of the results obtained is confirmed by the determination of trace elements after a matrix sorption separation procedure. For a number of elements, a comparison of the results obtained by ICP-AES without and with the matrix separation procedure and by electrothermal atomic absorption spectrometry (ETAAS) shows good agreement. The limits of detection for direct ICP-AES determination are in the range 0.4*1.0 μg g⁻¹ for Ba, Ca, Fe, Mg, Mn, Y and La; between 2.0 and 10.0 μ g⁻¹ for B, Cd, Co, Cr, Cu, Hf, Mo, Na, Nb, Ni, Pb, Sr, Ti, Zr and Ta; and for K, Sb and W a detection limit of 20 μ g⁻¹ is achieved. The schemes proposed are intended for rapid routine analysis.     

Determination of non-toxic and potentially toxic elements concentration and antioxidant capacity in selected natural and essential oils with high market values

Natural oils (NOs) and essential oils (EOs) are widely used in the food and beverage, medical, aromatherapy and cosmetic industries, but little is known about their elemental composition or antioxidant ability. Microwave-assisted acid digestion and inductively coupled plasma-optical emission spectroscopy were used to determine the non-toxic elements (Al, Ca, Cu, Fe, K, Mg, Na, Se and Zn) and potentially toxic elements (As, Cr, Cd, Mn, Ni and Pb) concentrations in 13 selected NOs and EOs. The per cent recoveries of laboratory-fortified blanks analysed for quality control were 94–110%. The elemental concentrations varied widely in NO and EO samples, as demonstrated by the large standard deviation obtained for some elements. The average levels of non-toxic elements (Al (14.5 ± 3.7 μg/g); Ca (278 ± 138 μg/g); Cu (7 ± 14 μg/g); Fe (16 ± 5 μg/g); K (36 ± 31 μg/g); Mg (56 ± 27 μg/g); Na (266 ± 277 μg/g); Se (0.7 ± 0.3 μg/g) and Zn (6.1 ± 2.6 μg/g)) were determined in NOs and EOs. Comparatively, low levels of potentially toxic elements (As (0.1 ± 0.2 μg/g); Cd (0.1 ± 0.0 μg/g); Cr (0.2 ± 0.1 μg/g); Mn (0.8 ± 0.1 μg/g); Ni (4.5 ± 2.2 μg/g); and Pb (0.3 ± 0.2 μg/g)) were obtained in the oils. Principal component analysis (PCA) revealed that the first two principal components explained 100% of the variability in the elemental concentrations. Na, Ca, Mg and K were the main contributors to PCA. Non-toxic element pairs were strongly correlated (R² > 0.9440) indicating a common source in these oils, but toxic element pairs were poorly correlated. Although toxic element concentrations were low, routine monitoring in oils is recommended. The antioxidant ability of NOs and EOs to potentially reduce free radicals, which are often involved in several degenerative diseases, such as ageing, stroke, diabetes and cancers was determined by DPPH (2,2-di(4-tert-octylphenyl)-1-picrylhydrazyl) free radical scavenging assay and ultraviolet-visible spectroscopy. Jasmine, castor and tea tree lemon oils were the best antioxidants. The oils in this study have the potential to replace artificial antioxidants used in foods, cosmetics and other products.     

Evaluation of strontium isotope abundance ratios in combination with multi-elemental analysis as a possible tool to study the geographical origin of ciders

In order to evaluate alternative analytical methodologies to study the geographical origin of ciders, both multi-elemental analysis and Sr isotope abundance ratios in combination with multivariate statistical analysis were estimated in 67 samples from England, Switzerland, France and two Spanish regions (Asturias and the Basque Country). A methodology for the precise and accurate determination of the ⁸⁷Sr/⁸⁶Sr isotope abundance ratio in ciders by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) was developed. Major elements (Na, K, Ca and Mg) were measured by ICP-AES and minor and trace elements (Li, Be, B, Al, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Y, Mo, Cd, Sn, Sb, Cs, Ba, La, Ce, W, Tl, Pb, Bi, Th and U) were measured by ICP-MS using a collision cell instrument operated in multitune mode. An analysis of variance (ANOVA test) indicated that group means for B, Cr, Fe, Ni, Cu, Se, Cd, Cs, Ce, W, Pb, Bi and U did not show any significant differences at the 95% confidence level, so these elements were rejected for further statistical analysis. Another group of elements (Li, Be, Sc, Co, Ga, Y, Sn, Sb, La, Tl, Th) was removed from the data set because concentrations were close to the limits of detection for many samples. Therefore, the remaining elements (Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba) together with ⁸⁷Sr/⁸⁶Sr isotope abundance ratio were considered for principal component analysis (PCA) and linear discriminant analysis (LDA). Finally, LDA was able to classify correctly 100% of cider samples coming from different Spanish regions, France, England and Switzerland when considering Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba and ⁸⁷Sr/⁸⁶Sr isotope abundance ratio as original variables.     

直接稀释进样-电感耦合等离子体原子发射光谱法同时测定原油中20种元素

原油样品(2.0g)用稀释剂航空煤油稀释至20.0g后,直接进样供电感耦合等离子体原子发射光谱法测定其中银、铝、硼、钡、钙、镉、铬、铜、铁、镁、锰、钼、钠、镍、铅、硅、锡、钛、钒和锌等20种元素的含量。在优化的试验条件下,20种元素的检出限(3S/N)在0.1～3mg·kg-1之间。方法用于分析原油样品,所得测定值的相对标准偏差(n=6)在1.24%～6.23%之间,回收率在80%～105%之间。     

Determination of trace elements in drinking tea by various analytical techniques

Tea has been one of the most popular simulating beverages which is both heavily produced and consumed in Taiwan. The determination of minor or trace elements in drinking tea and tea leaves is therefore important for estimating the daily intake of Taiwanese considered as a safety indicator. In order to accurately and precisely determine the concentrations of trace elements in samples, several analytical methods such as AAS, NAA and ICP-AES are suggested. This paper attempts to utilize all three methods to determine the concentrations of minor or trace elements in different types of tea leaves and the extracts percolated from them. The influence of fermentation processes on the concentration levels of minor or trace elements in tea samples is investigated. Because only free metal ions are bioavailable for the human body, it is necessary to determine their concentrations in drinking tea. The dissolution of trace elements in drinking tea is therefore studied by simulating the common Chinese style of tea percolation. Concentrations of thirteen elements including Zn, Mn, Ca, Cu, Ni, Al, K, Mg, Cd, Pb, Na, Co and Sc are determined.     

An off-line automated preconcentration system with ethylenediaminetriacetate chelating resin for the determination of trace metals in seawater by high-resolution inductively coupled plasma mass spectrometry

A novel automated off-line preconcentration system for trace metals (Al, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb) in seawater was developed by improving a commercially available solid-phase extraction system SPE-100 (Hiranuma Sangyo). The utilized chelating resin was NOBIAS Chelate-PA1 (Hitachi High-Technologies) with ethylenediaminetriacetic acid and iminodiacetic acid functional groups. Parts of the 8-way valve made of alumina and zirconia in the original SPE-100 system were replaced with parts made of polychlorotrifluoroethylene in order to reduce contamination of trace metals. The eluent pass was altered for the back flush elution of trace metals. We optimized the cleaning procedures for the chelating resin column and flow lines of the preconcentration system, and developed a preconcentration procedure, which required less labor and led to a superior performance compared to manual preconcentration (Sohrin et al. [5]). The nine trace metals were simultaneously and quantitatively preconcentrated from ∼120 g of seawater, eluted with ∼15 g of 1 M HNO₃, and determined by HR-ICP-MS using the calibration curve method. The single-step preconcentration removed more than 99.998% of Na, K, Mg, Ca, and Sr from seawater. The procedural blanks and detection limits were lower than the lowest concentrations in seawater for Mn, Ni, Cu, and Pb, while they were as low as the lowest concentrations in seawater for Al, Fe, Co, Zn, and Cd. The accuracy and precision of this method were confirmed by the analysis of reference seawater samples (CASS-5, NASS-5, GEOTRACES GS, and GD) and seawater samples for vertical distribution in the western North Pacific Ocean.     

Comparison of sample preparation methods for the ICP-AES determination of minor and major elements in clarified apple juices

Inductively coupled plasma atomic emission spectrometry (ICP-AES) was used for the determination of minor and major elements present in apple juices. Prior to ICP-AES measurement, samples were diluted with nitric acid or digested in a microwave assisted digestion system. The differences in the measured element concentrations after application of different types of sample preparation procedures are discussed. The direct measurement compared to closed microwave dissolution was found to be the best sample preparation procedure. Prior to the measurements the ICP-AES method was validated and optimized for the determination of elements in apple juices. For diluted apple juice samples the lowest limits of detection (LOD) were obtained for Ba and Cd (< 20 μg L^{− 1}), moderate ones for Cu, Mn, Ni, Fe, Ag, Ca, Cr, Zn, Mg, and Sr (20–100 μg L^{− 1}), and the highest LODs for K, Pb, Na, and Al (> 110 μg L^{− 1}). The results obtained for the repeatability (< 0.9%), the intermediate precision (< 4.5%), the day-to-day reproducibility (< 5.2%), and the overall uncertainty of measurement (approx. 4–7%) for all elements analyzed demonstrated the good applicability of the proposed method. Differences in major element content in fresh and commercial apple juice are discussed.     

Trace element analysis of motor oil by reactor neutron activation analysis

Normal motor oil have been analyzed by RNAA using thermal neutrons and single comparator method. The samples were taken from the oil carter of an engine. The concentration of trace elements have been measured as a function of running kilometers by -ray spectrometry. The trace elements which have been detected are Na, Mg, Al, Cl, V, Mn, Cu, Cr, Fe, Co, Zn, Br, Sb and Cd.     

电感耦合等离子体原子发射光谱法同时测定植物样品中多种元素

本文为环境样品分析建立了准确、灵敏、快速的分析方法,探讨了酸类及酸度对谱线强度的影响,同时对基体元素的谱线干扰进行了校正和背景扣除,测定了环境背景值样品树干和树叶中15种元素,经标样测定结果满意。     

Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

Determination of trace level impurities in uranium compounds by ICP-AES after organic extraction

The determination was studied of Al, B, Be, Cd, Ca, Co, Cu, Mg, Mn, Mo, Pb, Si, Sn, V, Cr, Ni, and Fe as trace level impurities in uranium compounds by ICP-AES after extraction of uranium with three different mixtures of di-(2-ethyl-hexyl) phosphate (D2EHP) and tri-(2-ethyl-hexyl)-phosphate (T2EHP) in solvents like toluene, carbon tetrachloride, hexane and cyclohexane. The study was carried out in presence of different concentrations of HCl and HNO(3). A single extraction with D2EHP in cyclohexane using nitric acid as matrix was sufficient to reduce the U(3)O(8) concentration from 100 g/l to 100 microg/ml. The ICP-AES instrumentation applied, allowed the determination of metal concentrations ten-times lower than those usually found in nuclear grade U(3)O(8). To check the efficiency of the extraction and the accuracy of the proposed method, Certified Reference Materials were used in the dissolution and extraction steps. The method described can be used for the determination of trace metals in nuclear grade U(3)O(8).     

ICP-AES analysis of metal content in shell of mussel Mytilus galloprovincialis from Croatian coastal waters

Metal content in samples of shell of mussel Mytilus galoprovincialis was determined by inductively coupled plasma atomic emission spectrometry (ICP-AES). The efficiency of conversion of crude samples into solution by acid digestion in an open plate and in a microwave oven was examined by use of certified reference material of marine sediment and laboratory made standards of calcite and aragonite. Influence of high Ca content matrix on emission intensities of Al, Ba, Cd, Cu, Fe, Mg, Mn, Na, Ni, Pb, Sr and Zn was observed as depression of emission signal for most of the measuring elements, ranging from 0.8% to 8%. Greater values were noted at Ba and Ni emission lines. Enhancement of signals was observed for Na and Mg lines. The determination of As, Sb, Se and Sn was performed by HG/ICP-AES. The greater abundance of Sn was found in samples collected near the Al-processing industry centre. No detectable concentrations of As, Sb, and Se were found in shell samples. Results of ICP-AES metal analysis showed that samples collected near harbours, city waste or sewage outlets, and chemical industry centres indicate the certain level of contamination. It is shown that shell analysis provides useful data in determination of marine environment status.     

The complementary use of radioanalytical methods and trace analysis methods for the characterisation of environmental IAEA reference materials

The IAEA laboratories have access to both nuclear analytical methods and conventional instrumental methods for trace analysis for the characterisation of its environmental and biological reference materials. A technical concept integrating the homogeneity data, the recommended test portion mass and the uncertainty on the trace element concentrations is explored using a combination of INAA, XRF, ICP-MS, ICP-AES, and AAS. The above approach is illustrated by selected examples of reference materials currently under evaluation for their trace element content. They include some or all of the following elements Al, As, Br, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, Rb, Se, Sr, Th, U, Zn in environmental biomonitor organisms (lichen, algae) and air dust filters.     

Trace element profile of a wild edible mushroom (Suillus granulatus)

Seventeen elements, Al, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, P, Pb, V, and Zn (macroelements and trace elements) were investigated by Atomic Spectrometries on a particular wild edible mushroom collected in the central region of Argentina during 2 different years in the same season. The metal content profile in Suillus granulatus samples is given. The found quantities of Na, K, Ca, Mg, Fe, P, V, and Al were 0.40, 10.84, 0.48, 0.30, 0.57, 4.24, 0.18, and 1.23 g/kg dry weight, respectively. The levels of Li, Cu, Zn, Cd, Co, Ni, Cr, and Mn were 0.98, 23.02, 22.30, 0.26, 0.16, 1.17, 0.90, and 28.75 mg/kg dry weight, respectively. Pb was not detected at the investigated levels. The results indicate that the levels of metals in the analyzed samples are not considered to be a health risk. In order to demonstrate the validity of our method, a recovery study was performed with acceptable results.