A review on analytical performance of micro- and nanoplastics analysis methods

Micro- and nanoplastics have been detected in diverse matrices. Recent studies have suggested their health impact on humans, animals, plants, and environment which depends on the size, concentration, chemical nature, and the mode of interaction of the plastic particles. Detection and quantification of these particles are often challenging due to their small size and complexity of the matrix in which they exist. The concentration and size of the particles combined with the nature of the matrix determines an analytical method to be followed. In recent years, many review articles focusing on origin, fate, and health effects of micro- and nanoplastics are already published. A systemic review focusing on analytical performance of currently available micro- and nanoplastics analysis methods would be useful for the scientific community. In this article, we reviewed papers and reports published in recent decades focusing on the sampling, concentration, detection, and chemical identification methods. We also reviewed the emerging new methods for microplastic analysis. Finally, we provide advantages and limitations of the methods and future perspectives on microplastic analysis.     

Recent advances in analytical chemistry--a material approach

Advancements of materials research have profound direct impacts on developments in analytical chemistry and may hold the key to improvement of existing or new techniques at present times and near future. Applications of materials in analytical chemistry are reviewed, with focus on sensors, separations and extraction techniques. This review aims to survey examples of interesting works carried out in the last five years over a broad spectrum of materials classified as hybrids, nanomaterials and biomolecular materials.     

Traceability and analytical chemistry

 The basic concepts of traceability as they are defined by the Comité Consultatif pour la Cluantité de Matière are contrasted with the practical exploitation in chemical analysis. The applicability of traceability concepts are tested for their practical applicability on four different analytical methodologies, neutron activation analysis, plasma mass spectrometry, beam microscopical analysis and speciation analysis of organometallic compounds. Received: 31 March 1998 · Accepted: 6 June 1998     

A new and consistent parameter for measuring the quality of multivariate analytical methods: Generalized analytical sensitivity

Generalized analytical sensitivity (γ) is proposed as a new figure of merit, which can be estimated from a multivariate calibration data set. It can be confidently applied to compare different calibration methodologies, and helps to solve literature inconsistencies on the relationship between classical sensitivity and prediction error. In contrast to the classical plain sensitivity, γ incorporates the noise properties in its definition, and its inverse is well correlated with root mean square errors of prediction in the presence of general noise structures. The proposal is supported by studying simulated and experimental first-order multivariate calibration systems with various models, namely multiple linear regression, principal component regression (PCR) and maximum likelihood PCR (MLPCR). The simulations included instrumental noise of different types: independently and identically distributed (iid), correlated (pink) and proportional noise, while the experimental data carried noise which is clearly non-iid.     

Validation and qualification: the fitness for purpose of mass spectrometry-based analytical methods and analytical systems

The context of validation for mass spectrometry (MS)-based methods is critically analysed. The focus is on the fitness for purpose depending on the task of the method. Information is given on commonly accepted procedures for the implementation and acceptance of analytical methods as ‘confirmatory methods’ according to EU criteria, and strategies for measurement. Attention is paid to the problem of matrix effects in the case of liquid chromatography-mass spectrometry-based procedures, since according to recent guidelines for bioanalytical method validations, there is a need to evaluate matrix effects during development and validation of LC-MS methods “to ensure that precision, selectivity and sensitivity will not be compromised”. Beneficial aspects of the qualification process to ensure the suitability of the MS analytical system are also evaluated and discussed.     

A theoretical framework for evaluating analytical digestion methods for poorly soluble particulate beryllium

Complete digestion of all chemical forms and sizes of particulate analytes in environmental samples is usually necessary to obtain accurate results with atomic spectroscopy. In the current study, we investigate the physicochemical properties of beryllium particles likely to be encountered in samples collected from different occupational environments and present a hypothesis that a dissolution theory can be used as a conceptual framework to guide development of strategies for digestion procedures. For monodisperse single-chemical constituent primary particles, such as those encountered when handling some types of beryllium oxide (BeO) powder, theory predicts that a digestion procedure is sufficient when it completely dissolves all primary particles, independent of cluster size. For polydisperse single-chemical constituent particles, such as those encountered during the handling of some types of beryllium metal powder, theory predicts that a digestion procedure is sufficient only when it completely dissolves the largest particle in the sample. For samples with unknown or multi-chemical constituent particles and with particles having undefined sizes, e.g., fume emissions from a copper–beryllium alloy furnace operation or dust from a beryl ore crushing operation, a surface area-limited and single-constituent-dependent dissolution theory may not predict complete dissolution, thereby requiring non-routine robust treatment procedures with post-digestion filtration, followed by examination of residual particulate material. Additionally, for beryllium, and likely other poorly soluble materials, particulate reference materials of various chemical forms and size distributions are needed to better evaluate and harmonize analytical digestion procedures. Figure Generation of aerosol particles during machining of beryllium oxide The findings and conclusions in this report are those of the authors and do not necessarily represent the views of the National Institute for Occupational Safety and Health.     

Chromatographic Resolution of Racemates. New analytical methods (17)

A number of racemates can be resolved into optically pure enantiomers by chromatography on optically active adsorbents. Synthetic polymers with optically active amide, amino acid, and crown ether groups, natural products such as starch and cellulose, and also microcrystalline triacetylcellulose are suitable for this purpose. Racemates can also be resolved by gas chromatography on optically active stationary phases.     

A computer program for ranking analytical methods according to their fitness for purpose

A program for conducting automatic searches for analytical methods, selecting the most suitable ones according to quality requirements, and ranking them based on quality indices calculated from various pre-selected quality parameters is proposed. The program uses an externally updated database (Analytical Abstracts CD-ROMs or other) and customised quality schemes based on accuracy, precision, sensitivity, applicability to real samples, determination range (ratio), throughput and impact factor (from the Citation Index). It can, therefore, be used for a variety of purposes in analytical chemistry.     

Quantitative gold nanoparticle analysis methods: A review

Research and development in the area of gold nanoparticles’ (AuNPs) preparation, characterization, and applications are burgeoning in recent years. Many of the techniques and protocols are very mature, but two major concerns are with the mass domestic production and the consumption of AuNP based products. First, how many AuNPs exist in a dispersion? Second, where are the AuNPs after digestion by the environment and how many are there? To answer these two questions, reliable and reproducible methods are needed to analyze the existence and the population of AuNP in samples. This review summarized the most recent chemical and particle quantitative analysis methods that have been used to characterize the concentration (in number of moles of gold per liter) or population (in number of particles per mL) of AuNPs. The methods summarized in this review include, mass spectroscopy, electroanalytical methods, spectroscopic methods, and particle counting methods. These methods may count the number of AuNP directly or analyze the total concentration of element gold in an AuNP dispersion.     

A practical approach to the preparative purification of peptides using analytical instrumentation with analytical and semipreparative columns

Summary We have examined the effect of particle size of silica-based reversed-phase packings and column packing techniques on the reversed-phase analytical separation of a peptide mixture. A C₁₈ packing of 15–20 μm average particle size produced satisfactory peptide resolution, allowing a relatively inexpensive scale up to the preparative purification of peptides. A shallow gradient (0.1% acetonitrile/min) elution procedure was developed for the preparative purification of closely related decapeptides (differing by one methyl group) on analytical (250×4.1 mm I.D.) and semipreparative (250×10 mm I.D.) columns. Up to 30 mg and 225 mg of the two-peptide mixture was efficiently resolved, with high yields of homogeneous peptides, on analytical and semipreparative columns, respectively, containing the 15–20 μm packing. We have also demonstrated the potential of our purification procedure for resolving more complex multicomponent mixtures by efficiently separating a total of 22 mg of three closely-related peptides on analytical columns containing 7 μm or 15–20 μm particle size reversed-phase packings. The use of the inexpensive 15–20 μm packing, coupled with the ability to pack efficient columns with analytical HPLC instrumentation, offers great cost saving potential.     

State of Development of Atomic Absorption Spectrometry [New analytical methods (1)]

Atomic absorption spectrometry has developed extremely rapidly in recent years, and is now used in many analytical laboratories. The purpose of this progress report is to show the present position and to examine critically the possibilities and limitations of atomic absorption methods.     

Implementation of ISO/IEC 17025 Standard for the accreditation of analytical laboratories in Russia

The history since 1992 and the current state of affairs of the Russian Accreditation system for analytical laboratories are described. Some national characteristics of the implementation of the ISO/IEC 17025 Standard in Russia are considered. The elucidation of some ISO/IEC 17025 Standard prepositions is presented to facilitate implementation of the Standard by accreditation bodies and analytical laboratories claiming accreditation.     

Studies on pollution of water and air dust of Benghazi using various analytical methods

Nondestructive neutron activation analysis has been used for the analysis of 17 out of 24 elements in 12 samples of air particulate matter collected from various localities in Benghazi. Both relative and monostandard methods were used. The neutron activation method was supplemented with graphite furnace atomic absorption, so that most toxic elements could be assayed in the same samples. Thus Cd, Cr, Cu, Mn, Ni, Pb, V and Zn could be analysed quantitatively in most of the samples. It has been found that contamination of the atmosphere of Benghazi with dust is largely due to heavy construction work in the city, action of wind on the surface of land around the city and the release of exhaust products from vehicles and airplanes. Particular contamination due to industrial activities was not noticeable. Results on samples from Benghazi were compared with those from Prague, Munich and Sendai.Research Project Studies on the environmental status change in Benghazi with special reference to water and air pollution, Research Center University of Garyounis, Benghazi, Libya.     

Critical review of analytical methods for determination of inorganic mercury and methylmercury compounds

This review describes determinations of mercury compounds under three categories: total mercury; separate determinations of inorganic mercury(II) and organomercury compounds by selective reduction; and speciation of inorganic mercury(II), monomethylmercury cation, and dimethylmercury. Topics described for each category include sample treatment, separation, detection, and limit of detection. Finally, we note that most methods would not detect dimethylmercury if it were present.     

A comparative analysis of various gradient methods for geometry optimization at the ab initio SCF-MO level

Various techniques, already suggested for improving the computational efficiency of the force relaxation method, have been applied here in conjunction with the variable metric algorithms suggested by Murtagh and Sargent and by Fletcher. Various tests have been performed to assess the computational efficiency of the resulting minimization procedures. In addition, procedures where the steps are defined in terms of a parabolic fitting of the forces in approximated normal coordinates have been tested. In all cases the forces are computed analytically.     

The role of various binding materials for trace elemental analysis of powder samples using laser-induced breakdown spectroscopy

Study of various binding materials like potassium bromide, poly(vinyl alcohol), starch, silver and aluminum has been carried out using laser-induced breakdown spectroscopy (LIBS). The role of matrix effects using these five binders on LIBS signal intensity was investigated for better performance of LIBS technique as a quantitative analytical tool. For comparative study of different binders, the signal intensity of different Mg lines at 518.3, 517.2, 383.8 and 279.5 nm wavelengths were recorded for pellets prepared with known concentrations of Mg in these binders. The influence of laser energy on ablated mass under different binding materials and its correlation with LIBS signal intensity has been explored. Optical scanning microscopy images of the ablated crater were studied to understand the laser ablation process. The study revealed that the binding material plays an important role in the generation of LIBS signal. The relative signal intensity measured for a standard Mg line (at 518.3 nm) were 735, 538, 387, 227 and 130 for potassium bromide, starch, poly(vinyl alcohol), silver and aluminum as binders, respectively. This indicates clearly that potassium bromide is better as a binder for LIBS studies of powder samples.     

Benefits arising from proficiency testing schemes: The comparison of analytical methods

 The primary objective of proficiency testing (PT) is in the provision of information and support to participating laboratories, to enable them to monitor and improve the quality of their measurements. However, other benefits can be obtained from PT. These include the comparison of data for a given measurement by different methods, the validation of new methods, and the provision of information for laboratories' customers and accreditation bodies. This paper considers the subject of method comparison, and highlights some of the approaches which can be followed, as well as the practical use to which this can be put, to benefit the analytical community more widely. This is illustrated by a case study concerning the measurement of haze in beer. In this study the United Kingdom Institute of Brewing (IoB) conducted a survey of participants in the Brewing Analytes Proficiency Scheme (BAPS). From the survey data taken together with data from the BAPS scheme, the IoB is now in a position to give guidance on the use of particular instruments and procedures, as well as consider changes to the scope of the BAPS scheme to provide greater benefits for participants concerned with measuring haze. Received: 3 March 1998 · Accepted: 9 June 1998     

异辛烷中正十六烷溶液标准物质制备

以正十六烷和异辛烷为原料,采用重量–容量法制备异辛烷中正十六烷溶液标准物质。经过均匀性检验、稳定性考察和量值比较,结果表明该标准物质符合国家二级标准物质的研制要求,标准值为500 ng/μL(Urel=2%,k=2),可作为量值传递的标准,用于气相色谱仪的校准和检定、分析方法评价,以及正十六烷的质量控制等方面。该标准物质已取得国家二级标准物质证书,证书编号为GBW(E)130660。     

Development and application of a micro-digestion device for elemental analysis of biological samples

A commercially available piece of equipment for high pressure ashing was adapted for the digestion of micro-samples of biological origin by a supplementary device. This attachment is shown to be suitable for solids with a sample amount of some micrograms and for liquids with a volume of a few microliters. In addition, the homogeneity of two reference materials NBS SRM 1571 “Orchard Leaves” and BCR CRM 414 “Plankton” is tested. For that purpose, the results of elemental analysis of small portions down to the level of 1 mg are compared with those for larger portions recommended by the supplier. Elements are found to be homogeneously distributed in test portions down to 100 mg but a few elements show an inhomogeneous distribution in portions ≤3 mg. For multi-element determinations, total reflection X-ray fluorescence spectrometry was used after addition of an internal standard to the digestion solutions.