A colormetric and fluorescent chemosensor for adenosine-5′-triphosphate based on rhodamine derivative

A rhodamine spirolactam derivative (1) was developed as a colormetric and fluorescent chemosensor for adenosine-5′-triphosphate (ATP) via hydrogen bonds interaction. As far as we know, this is the first case to explore ATP-induced ring-opening of spirolactam in rhodamine derivatives. It exhibited a highly sensitive “turn-on” fluorescent response toward ATP with a 47-fold fluorescence intensity enhancement under 20 equiv. of ATP added. The chemosensor can be applied to the quantification of ATP with a linear range covering from 1.0 × 10⁻⁷ to 2.0 × 10⁻⁴ M and a detection limit of 2.5 × 10⁻⁸ M. The experiment results show that the response behavior of 1 toward ATP is pH independent in medium condition (pH 6.0–8.0). Most importantly, the novel chemosensor has well solved the problem of serious interferences from other nucleoside polyphosphates such as ADP and AMP generally met by previously reported typical fluorescent chemosensors for ATP. Moreover, the response of the chemosensor toward ATP is fast (response time less than 3 min). In addition, the chemosensor can be used for the fluorescence assay for protein kinase activity with satisfactory results. The chemosensor for ATP based on hydrogen bonds interaction provided a novel strategy for the design of colormetric and ratiometric fluorescent probes for other target anions with high sensitivity and selectivity.     

2,2′,3,4-Tetrahydroxy-3′-sulpho-5′-nitroazobenzene for spectrophotometric determination of aluminium in pharmaceutical suspensions and granite

A selective and sensitive new spectrophotometric method has been developed for the determination of aluminium. 2,2′,3,4-Tetrahydroxy-3′-sulpho-5′-nitroazobenzene (tetrahydroxyazon SN) formed an orange chelate with aluminium at pH 4. Molar absorptivity of the complex in 1:2 is 5.46 × 10⁴ l mol⁻¹ cm⁻¹ at 479 nm. The method obeys Beer's law in the range of 0.005-1.079 μg ml⁻¹. The determination of aluminium is not interfered with by earth alkaline, alkaline elements, rare earth elements, halides, phosphates, sulphates, urea, ascorbic acid, Sn²⁺, Sr²⁺, Cr³⁺, Cd²⁺, Hg²⁺, or Mn²⁺. The proposed method is rapid and simple, and it has been successfully applied to the determination of aluminium in certified pharmaceutical suspension and granite.     

The measurement of cyclic nucleotide phosphodiesterase 4 activities via the quantification of inorganic phosphate with malachite green

A spectrometric method was investigated to measure the activities of recombinant human cyclic nucleotide phosphodiesterase 4 (PDE4), based on the use of malachite green (MLG) to quantify phosphate released from adenosine-5′-monophosphate (AMP) by the action of calf intestinal alkaline phosphatase (CIAP). Glycerol at 2% stabilized the complex between MLG and phosphomolybdate, whose absorbance at 630 nm was proportional to phosphate concentrations with resistance to common substances in PDE4 reaction mixtures except papaverine. CIAP had the Michaelis-Menten constant (K_m) of (12.0 ± 2.1) μM (n = 3) for AMP at pH 7.4, and was resistant to EDTA below 0.20 mM. By the coupled end-point assay at 30.0 U L⁻¹ CIAP with reaction durations within 30 min, the rates to release phosphate in PDE4 reaction mixtures containing 10.0 mM MgCl₂ and 0.10 mM EDTA linearly responded to the amounts of PDE4 over wide ranges. Meanwhile, K_m of PDE4 was (8.8 ± 0.2) μM (n = 2), zinc ion inhibited PDE4 and rolipram had the inhibition constant about 10 nM. These results supported that by the coupled end-point assay, this method was promising to screen of PDE inhibitors that had no interference with the MLG assay of phosphate.     

Synthesis of a new biacridine and its use as the chemiluminescent probe for immunoassay of carcinoembryonic antigen

A new biacridine compound, 10,10′-dimethyl-3,3′-disulfo-9,9′-biacridine (DMDSBA) was synthesized, and its chemiluminescent characteristics were investigated in detail. DMDSBA was used to label anti-CEA antibody. The labeling ratio was estimated to be 1.15-1.32, and the average labeling ratio was 1.25. The results show that there are no obvious changes in the immunoreactivity of the labeled anti-CEA antibody and the quantum efficiency of DMDSBA after attaching to the anti-CEA antibody. In addition, the conditions of labeling reaction, sandwich immunoassay and chemiluminescent reaction have been studied. A new sandwich chemiluminescent immunoassay method was firstly established, and used to determine CEA in human serum, the calibration range is 1.0-100 ng ml⁻¹ and the minimal detectable concentration of CEA is 0.53 ng ml⁻¹, the relative standard deviation is 6.5% for 20 ng ml⁻¹ CEA. This method was well-matched with radio immunoassay.     

Synergistic liquid-liquid extractive spectrophotometric determination of gold(III) using 1-(2′,4′-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol

Synergistic liquid-liquid extractive spectrophotometric determination of gold(III) using 1-(2′,4′-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydro pyrimidine-2-thiol [2′,4′-dinitro APTPT] has been described. Equal volumes (5 cm³) of the 2′,4′-dinitro APTPT (0.02 mol L⁻¹) in the presence of pyridine (0.5 mol L⁻¹) form an orange-red coloured ternary complex with gold(III) of molar ratio 1:1:1 at pH 1.8-2.4 with 5 min of shaking. The absorbance of coloured organic layer in 1,2-dichloroethane is measured spectrophotometrically at 445 nm against reagent blank. A pronounced synergism has been observed by the binary mixture of 2′,4′-dinitro APTPT and pyridine, which shows that the enhancement in the absorbance is observed in the presence of pyridine by the adduct formation in the organic phase. Beer's law was obeyed in the concentration range 2.5-20.0 μg mL⁻¹, with molar absorptivity and Sandell's sensitivity values of 8.7 × 10³ dm³ mol⁻¹ cm⁻¹ and 0.023 μg cm⁻² respectively. A repetition of the method was checked by finding relative standard deviation (R.S.D.) (n = 10) which was 0.17%. The composition of the gold(III)-2′,4′-dinitro APTPT-pyridine adduct was established by slope analysis, molar ratio and Job's method. The ternary complex was stable for more than 48 h. The influence of various factors such as pH, 2′,4′-dinitro APTPT concentration, solvent and pyridine on the degree of complexation has been established. A number of foreign ions tested for their interferences and use of suitable masking agents wherever necessary are tabulated, which show that selectivity of the method has been enhanced. The method is successfully employed for the determination of gold(III) in binary, synthetic mixtures and ayurvedic samples. The reliability of the method is assured by inter-comparison of experimental values, using an atomic absorption spectrometer.     

In vitro binding studies of organotin(IV) complexes of 1,2-bis(1H-benzimidazol-2-yl)ethane-1,2-diol with CT-DNA and nucleotides (5′-GMP and 5′-TMP): Effect of the ancillary ligand on the binding propensity

The chiral benzimidazole ligand, 1,2-Bis(1H-benzimidazol-2-yl)ethane-1,2-diol, L, exhibiting coordination mode with an oxygen atom of alcohol group directed towards the metal ion and another -OH group with different molecular axis directed away from the metal center was utilized as a building block for organotin complexes [C₁₈H₁₉N₄O₂SnCl], [C₂₈H₂₃N₄O₂SnCl] and [C₅₂H₄₂N₄O₂Sn₂] (1-3). Complexes 1 and 3 exhibit a pentacoordinate geometry while the complex 2 reveals hexacoordinated environment around the Sn(IV) metal ions as evidenced by ¹¹⁹Sn NMR studies. The DNA binding ability of benzimidazole ligand and their organotin(IV) complexes 1-3 were examined by employing different biophysical methods. The absorption titration of the complexes with CT-DNA reveal significant hyperchromic effect together with strong bathochromic shift of 4-5 nm which infer substantial binding of the complexes with CT-DNA. The intrinsic binding constant K_b values of the complexes 1-3 were found to be 2.16 ± 0.04 × 10⁴, 3.47 ± 0.04 × 10⁴ and 4.60 ± 0.04 × 10³ M⁻¹, respectively, suggesting pronounced binding of complex 2 with DNA double helix. The mechanism of binding of the complexes was further ascertained by the interaction studies of these complexes with nucleotides (5′-GMP and 5′-TMP) using absorption spectroscopy suggesting a clear preference for 5′-GMP binding which was further authenticated by NMR (¹H and ³¹P NMR) studies.     

Characterization of the interaction of hypericin with protein kinase C in U-87 MG human glioma cells

A fluorescence imaging technique was used to monitor intracellular localization of protein kinase C (PKC) in U-87 MG human glioma cells in the presence of hypericin (Hyp) and phorbol 12-myristate-13-acetate (PMA). It is shown that PKC localization, which reflects its activity, is influenced by Hyp and this influence is different from that observed for PMA which acts as PKC activator. Fluorescence binding experiments were used to determine the binding constants of Hyp to several isoforms of PKC. The obtained values of K(d)s (approximately 100 nM) suggest that Hyp binds with high affinity to PKC. Finally, molecular modeling was used to compare structural models of the interaction of C1B domain of PKC (PKC isoforms alpha, delta, gamma) with Hyp and our previously published model of the (C1B domain PKCgamma)/PMA complex. The influence of Hyp on PKC translocation in U-87 MG cells in comparison with PMA, colocalization fluorescence pattern of Hyp and PKC, the higher binding affinity of Hyp to PKC in comparison with known binding constants of phorbol esters, as well as the binding mode of Hyp and PMA to the C1B domain of PKC suggested by molecular modeling, support the idea that Hyp and PMA might competitively bind to the regulatory domain of PKC.     

Gallium(III) selective sensors based on 2-amino-3-(α-N-phenylmethyl-2′-amino-1′,4′-naphthoquinonyl)-1,4 naphthoquinones in poly (vinyl chloride)

Synthesis and application of 2-amino-3-(α-N-phenylmethyl-2′-amino-1′,4′-naphthoquinonyl)-1,4 naphthoquinone (S) as a neutral ionophore for the determination of gallium(III) in PVC-based membrane sensors has been described. The sensor based on membrane composition (w/w, mg%); 5.0 (S):30.0 (PVC):5.0 (KTpClPB):60.0 (o-NPOE) is the best and showed a working range of 2.3 × 10⁻⁷ to 1.0 × 10⁻² M with detection limit of 1.2 × 10⁻⁷ M. It can tolerate non-aqueous media up to 15% with a slope of 19.7 mV decade⁻¹ of activity. The sensor has been used to assess the Ga(III) concentration in different natural samples (peach and tomato leaves, coal-fly-ash and river sediments). It can be used for 2.5 months without any distortion in results, after which, leaching of ionophore was observed from the membrane phase. The proposed sensor has shown a good dynamic response time of 11 s.     

The relevance of the fluorine interactions in the supramolecular structure of a complex constructed from copper(II) hexafluoroacetylacetonate and the 4′-(3-pyridyl)-2,2′:6′,2″-terpyridine ligand. Novel C-F/π synthons involving the π-system of the terpyridine moieties and those of the hexafluoroacetylacetonate chelate rings

Reaction of 4′-(3-pyridyl)-2,2′:6′,2′′-terpyridine (pyterpy) with Cu(hfacac)₂ (hfacac = hexafluoroacetylacetonate) led to the formation of the novel compound [Cu₃(hfacac)₄(μ-pyterpy)₂][Cu(hfacac)₃]₂ (1). The structure is composed of a trinuclear [Cu₃(hfacac)₄(μ-pyterpy)₂]²⁺ cation and two [Cu(hfacac)₃]⁻ anionic species. The cation consists of a chain of three Cu^II atoms connected by bridging pyterpy ligands. The [Cu(hfacac)₃]⁻ anions have the hfacac ligands coordinated in their usual chelating manner through their carbonyl O donors. Besides the coulombian forces, the ionic species are fixed by C-H?O, C-H?F, F?F and a variety of unusual inter-ion C-F?π interactions that control the packing motif. These π-interactions involve the terpyridine groups from the pyterpy ligand and the five-membered rings of the chelating hexafluoroacetylacetonate anions.     

Preliminary evaluation of monolithic column high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection for the determination of quetiapine in human body fluids

High-performance liquid chromatography (HPLC) with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection methodology is reported for the determination of the atypical antipsychotic drug quetiapine and the observation of its major active and inactive metabolites in human urine and serum. The method uses a monolithic chromatographic column allowing high flow rates of 3 mL min⁻¹ enabling rapid quantification. Flow injection analysis (FIA) with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection and HPLC time of flight mass spectrometry (TOF-MS) were used for the determination of quetiapine in a pharmaceutical preparation to establish its suitability as a calibration standard. The limit of detection achieved with FIA was 2 × 10⁻¹¹ mol L⁻¹ in simple aqueous solution. The limits of detection achieved with HPLC were 7 × 10⁻⁸ and 2 × 10⁻¹⁰ mol L⁻¹ in urine and serum, respectively. The calibration range for FIA was between 5 × 10⁻⁹ and 1 × 10⁻⁶ mol L⁻¹. The calibration ranges for HPLC were between 1 × 10⁻⁷-1 × 10⁻⁴ and 1 × 10⁻⁸-1 × 10⁻⁴ mol L⁻¹ in urine and serum, respectively. The quetiapine concentrations in patient samples were found to be 3 × 10⁻⁶ mol L⁻¹ in urine and 7 × 10⁻⁷ mol L⁻¹ in serum. Without the need for preconcentration, the HPLC detection limits compared favourably with those in previously published methodologies. The metabolites were identified using HPLC-TOF-MS.     

Electrochemiluminescent behaviors of alkaloids and tris(2,2'-bipyridine) ruthenium in organically modified silicate film

Electrogenerated chemiluminescences (ECLs) of alkaloids, such as berberine, trigonelline, allantoin and betaine, were studied in an aqueous alkaline buffer solution (pH 9.5), based on tris(2,2′-bipyridine)ruthenium(II) [Ru(bpy)₃²⁺] immobilized in organically modified silicates (ORMOSILs) film on a glassy carbon electrode (GCE). The immobilized Ru(bpy)₃²⁺ showed good electrochemical and photochemical activities. In a flow system, the eluted alkaloids were oxidized on the modified GCE, and reacted with immobilized Ru(bpy)₃²⁺ at the potential of +1.50 V (versus Ag/AgCl). The luminescence with λ_max 610 nm was caused by a reaction of electrolytically formed Ru(bpy)₃³⁺ with an oxidized amine group to generate Ru(bpy)₃^2+*. The determination limit was 5 × 10⁻⁶ mol L⁻¹, 8 × 10⁻⁶ mol L⁻¹, 2.0 × 10⁻⁵ mol L⁻¹ and 5.0 × 10⁻⁵ mol L⁻¹ for berberine, trigonelline, allantoin and betaine at S/N 3, respectively. In addition, the factors affecting the determination of the four alkaloids were also studied.     

Tris(2,2'-bipyridyl)ruthenium(II)-Zirconia-Nafion composite modified electrode applied as solid-state electrochemiluminescence detector on electrophoretic microchip for detection of pharmaceuticals of tramadol, lidocaine and ofloxacin

Tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺)-Zirconia-Nafion composite modified glassy carbon disk electrode as a solid-state electrochemiluminescence (ECL) detector is successfully applied to an electrophoretic microchip system with a wall-jet configuration. Pharmaceuticals such as tramadol, lidocaine and ofloxacin were selected to characterize the performance of this microchip capillary electrophoresis (CE)-ECL detection system. Voltammetric and ECL behaviors of immobilized Ru(bpy)₃²⁺ were investigated in lidocaine system. Influences of the separation electric field to cyclic voltammograms (CVs) of the immobilized Ru(bpy)₃²⁺ were also investigated. Tramadol, lidocaine and ofloxacin can be baseline separated without any additives. The detection limits (S/N = 3) were 2.5 × 10⁻⁵ mol L⁻¹ for tramadol, 5.0 × 10⁻⁶ mol L⁻¹ for lidocaine, 1.0 × 10⁻⁵ mol L⁻¹ for ofloxacin under the sample injection of picoliters, and the linear ranges were from 5.0 × 10⁻⁵ to 2.5 × 10⁻³ mol L⁻¹ for tramadol, 1.0 × 10⁻⁵ to 1.0 × 10⁻³ mol L⁻¹ for lidocaine, and 1.0 × 10⁻⁵ to 2.5 × 10⁻³ mol L⁻¹ for ofloxacin, respectively.     

Sensitive fluorimetric flow injection analysis for fluoride ion with a novel reagent, 2',7'-dichlorofluorescein di-tert-butyldimethylsilyl ether

A novel reagent, 2′,7′-dichlorofluorescein di-tert-butyldimethylsilyl ether (FCl₂TBS), was synthesized for fluoride ion and used for a sensitive fluorimetric flow injection analysis by detecting the recovery of fluorescence due to cleavage of Si-O bond. Four kinds of fluorescein di-tert-butyldimethylsilyl ether (FTBS) analogues were synthesized and FCl₂TBS was the best. By introducing chlorine to FTBS, stability of the reagent, reactivity and the baseline signals were improved. The FIA system was three lines. The sample solution (aqua medium) was injected in the carrier solution (water) and merged with the reagent solution (2.0 × 10⁻⁵ M FCl₂TBS acetone solution), then mixed with phosphate buffer solution (pH 7.5). The fluorescence intensities were measured at λ_ex 503 nm and λ_em 527 nm. The calibration graph had linear relationship between (1.0-50.0) × 10⁻⁶ M and the determinable limit was 1.0 × 10⁻⁶ M. The relative standard deviation of 12 measurements with 1.0 × 10⁻⁵ M F⁻ solution was 1.0% and the sample throughput was 13 h⁻¹. The developed method was successfully applied to river and tap water samples.     

Sensitive determination of ultra-trace nitric oxide in blood using derivatization-polymer monolith microextraction coupled with reversed-phase high-performance liquid chromatography

Nitric oxide (NO) plays a very important role in human blood system. In this work, a novel approach has been developed for the quantitation of ultra-trace NO derivatized with 1,3,5,7-tetramethyl-8-(3′,4′-diaminophenyl)-difluoroboradiaza-s- indacene (DAMBO) using a polymer monolith microextraction (PMME) with a poly(methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith in conjunction with high-performance liquid chromatography (HPLC). Both derivatization and PMME conditions have been optimized in detail. The detection limit of derivatized NO was 2 × 10⁻¹² mol L⁻¹ (signal to noise = 3) and linear range was 9 × 10⁻¹¹-4.5 × 10⁻⁸ mol L⁻¹. The proposed DAMBO-based derivatization-PMME-HPLC-fluorescence detection method has been successfully applied for the determination of NO in 10 μL blood samples of healthy persons and patients suffering from ischemic cardio-cerebrovascular diseases with recoveries varying from 87.40 to 91.60%.     

Application and details of photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones and related compounds

As novel methodology for synthesizing the furan ring, a photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones (7a-c) and related compounds 9a-c was accomplished to give 5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1,3H)-dionylium tetrafluoroborates (8a-c⁺·BF₄⁻) and related compounds 2a-c⁺·BF₄⁻, respectively. In the photoinduced oxidative cyclization, the molecular oxygen in air is used as oxidant and the reaction proceeds under mild conditions to give desired products without byproducts, and thus, it is interesting from the viewpoint of the green chemistry. On the reactions of the mono-substituted derivatives 7d,e and 9e,f, the selectivity of the photoinduced cyclizations were reversed as compared with those of the DDQ-promoted oxidative cyclizations. By the NMR monitoring of the reactions of 7a and deuterated compound 7a-D₂ under degassed conditions, the details of the reaction pathway were clarified and rationalized on the basis of the MO calculation by the 6-31G^∗ basis set of the MP2 levels as well.     

Electrochemical behavior of dopamine at a 3,3′-dithiodipropionic acid self-assembled monolayers

Monolayers of 3,3′-dithiodipropionic acid (DTDPA) were prepared on a polycrystalline gold electrode through a self-assembly procedure to produce a gold 3,3′-dithiodipropionic acid self-assembled monolayer (AuDTDPA) modified electrode. The characterization of the AuDTDPA electrode was investigated by cyclic voltammetry and ac impedance using the [Fe(CN)₆]^3−/4− redox couple. The electrochemical behavior of DA on the modified electrode AuDTDPA was studied by cyclic and square-wave voltammetries, using phosphate buffer as supporting electrolyte. The oxidation peak current for DA increases linearly with concentration in the range of 0.35 × 10⁻⁵ to 3.4 × 10⁻⁵ mol L⁻¹. The performance of the AuDTDPA modified electrode was evaluated for the electroanalytical determination of dopamine (DA) in a pharmaceutical formulation. The AuDTDPA modified electrode showed a stable behavior and the presence of surface-COOH groups avoided the passivation of the electrode surface during the dopamine oxidation.     

Synthesis and characterization of a π-conjugate, covalent layered network derived from condensation polymerization of the 4,4′-bipyridine-cyanuric chloride couple

Nucleophilic substitutions of the reactive chlorine atoms in cyanuric chloride by the bridging 4,4′-bipyridine in refluxing toluene lead to quaternarization of the latter and the subsequent formation of a π-conjugate, covalent layered network. The network is composed of central 1,3,5-triazine units with 4,4′-bipyridinium rings covalently attached and balanced by the released chloride ions. Due to the extremely high electron deficiency of the triazine rings, the material undergoes partial reduction by its compensated chloride ions resulting in a radical concentration of 1 × 10²⁰ spin g⁻¹, according to EPR quantitative analysis. In this instance, the radicals provide stability to the organic network by minimizing its electron deficiency. The material exhibits thermal and electrochemical stability, as evidenced by thermal gravimetric analysis (TGA) and cyclic voltammetry techniques. As such, the π-conjugate organic material displays low band gaps and electrical conductivity in the range of 10⁻⁴-10⁻⁵ S cm⁻¹ at room temperature.     

Analysis of urinary neurotransmitters by capillary electrophoresis: sensitivity enhancement using field-amplified sample injection and molecular imprinted polymer solid phase extraction

Capillary electrophoresis (CE) has been investigated for the analysis of some neurotransmitters, dopamine (DA), 3-methoxytyramine (3-MT) and serotonin (5-hydroxytryptamine, 5-HT) at nanomolar concentrations in urine. Field-amplified sample injection (FASI) has been used to improve the sensitivity through the online pre-concentration samples. The cationic analytes were stacked at the capillary inlet between a zone of low conductivity - sample and pre-injection plug - and a zone of high conductivity - running buffer. Several FASI parameters have been optimized (ionic strength of the running buffer, concentration of the sample protonation agent, composition of the sample solvent and nature of the pre-injection plug). Best results were obtained using H₃PO₄–LiOH (pH 4, ionic strength of 80 mmol L⁻¹) as running buffer, 100 μmol L⁻¹ of H₃PO₄ in methanol–water 90/10 (v/v) as sample solvent and 100 μmol L⁻¹ of H₃PO₄ in water for the pre-injection plug.In these conditions, the linearity was verified in the 50–300 nmol L⁻¹ concentration range for DA, 3-MT and 5-HT with a determination coefficient (r²) higher than 0.99. The limits of quantification (10 nmol L⁻¹ for DA and 3-MT, 5.9 nmol L⁻¹ for 5-HT) were 500 times lower than those obtained with hydrodynamic injection. However, if this method is applied to the analysis of neurotransmitters in urine, the presence of salts in the matrix greatly reduces the sensitivity of the FASI/CE–UV method.Therefore, a solid phase extraction (SPE) on a dedicated imprinted polymer (MIP) was developed to extract specific neurotransmitters, catecholamines, metanephrines and indolamines, from urine. Matrix salts were thus discarded after sample extraction on AFFINIMIP™ Catecholamine & Metanephrine (100 mg) cartridge.Therefore, lower limits of quantification were determined in artificial urine (46 nmol L⁻¹ for DA, 11 nmol L⁻¹ for 3-MT and 6 nmol L⁻¹ for 5-HT).The application of this protocol MIP-SPE/FASI–CE–UV analysis of neurotransmitters in human urine gave rise to electropherograms with a very good base line and signal to noise ratios above 15.     

Electrocatalytic detection of phenolic estrogenic compounds at NiTPPS|carbon nanotube composite electrodes

A Ni(II)tetrakis(4-sulfonatophenyl) porphyrin (NiTPPS)|carbon nanotube composite electrode that shows strong catalytic and antifouling capability was developed to detect a series of phenolic endocrine compounds including bisphenol A, nonylphenol and ethynylestradiol. This electrode was fabricated by electropolymerizing NiTPPS complexes on a carbon nanotube-modified glassy carbon electrode. Optimized experimental parameters including a hydrodynamic potential of 0.7 V for flow injection analysis (FIA) and a NiTPPS surface coverage of 2.2 nmol cm⁻² (standard deviation 0.2 nmol cm⁻²; n = 6) were obtained for detection of the endocrine disrupting compounds. The sensor responded well to all the tested compounds with limits of detection ranging from 15 nmol L⁻¹ to 260 nmol L⁻¹ (based on three times S/N ratio) under FIA conditions. Both carbon nanotubes and NiTPPS account for the excellent performance of the composite modified electrode.     

Metal-organic framework based on copper(I) sulfate and 4,4-bipyridine catalyzes the cyclopropanation of styrene

The hydrothermal synthesis of a new metal-organic framework (MOF) formulated as Cu₂(4,4′-bpy)₂SO₄·6(H₂O), [abbreviation: (1); bpy or 4,4′-bpy=4,4′-bipyridine; SO₄²⁻=sulfate group] has been reported. The structure of this MOF consists of Cu⁺ nodes connected via 4,4′-bpy to form infinite chains, with two neighboring chains further bridged on the nodes by SO₄²⁻, resulting in a 1-D double chain network. Guest water molecules reside in between the chains and are hydrogen-bonded to the O and S atoms from the nearest sulfate groups, leading to the formation of a 3-D supramolecular framework. This MOF is good heterogeneous catalyst for the cyclopropanation of styrene, with high trans cyclopropane diastereoselectivity and was recycled and reused for three consecutive cycles without a significant loss of catalytic activity.