Strongly luminescent palladium(0) and platinum(0) diphosphine complexes

The synthesis, structure, and photoluminescence of palladium(0) and platinum(0) complexes containing biarydiphosphines, biphep (biphep = 2,2'-bis(diphenylphosphino)-1,1'-biphenyl) and binap (binap = 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl) have been studied. X-ray structure analysis of [Pt(biphep)(2)] revealed the distorted-tetrahedral geometry of the complex. The photophysical properties of the three complexes [Pd(biphep)(2)], [Pt(biphep)(2)], and [Pd(binap)(2)] were investigated and compared with that of the previously reported [Pt(binap)(2)] complex. The [Pd(biphep)(2)] complex shows the strongest luminescence with a high quantum yield (38%) and a long lifetime (3.2 micros) in a toluene solution at room temperature. The luminescence should be due to metal-to-ligand charge transfer excited states. At room temperature, radiative rate constants of the four complexes show similar values. The difference in the luminescent properties should reflect the different nonradiative rate constants of the complexes. The temperature-dependence of the luminescence spectra and lifetime of the complexes were also discussed.     

Design and study of Bi[1,8]naphthyridine ligands as potential photooxidation mediators in Ru(II) polypyridyl aquo complexes

A series of 3,3'-polymethylene-bridged bi[1,8]naphthyridine (binap) ligands, 3a-c, are complexed with Ru(II) to afford [Ru(tpy)(3a-c)(H(2)O)](2+) where an uncomplexed nitrogen on 3a-c is situated so it can form a H-bond with the coordinated water. An additional complex involving [Ru(4'-NMe(2)tpy)(3b)(H(2)O)](2+) is also prepared. X-ray analyses of the [Ru(tpy)(3a,c)(H(2)O)](2+) complexes indicate well-organized H-bonds even when the binap is nonplanar. In an attempt to realize photooxidation, the effects of light, varying potential, and pH were examined. A Pourbaix diagram indicated that the oxidation potential decreased by approximately 0.5 V in the pH range of 1.9-11.6. The lowest-energy electronic absorption for the binap complexes involves the metal-to-ligand charge transfer to the binap ligand and is sensitive to ligand planarity. The absorbance shifted to a lower energy as the auxiliary ligand became a better donor (4'-NMe(2)tpy) or as the water was deprotonated. Acetonitrile was found to displace water most easily for the complex of 3c, where the ligand is the least planar. Despite promising features, photooxidation of the bound water was not observed.     

A study of [Co2(alkyne)(binap)(CO)4] complexes (BINAP=(1,1'-binaphthalene)-2,2'-diylbis(diphenylphosphine))

Understanding the interaction of chiral ligands, alkynes, and alkenes with cobaltcarbonyl sources is critical to learning more about the mechanism of the catalytic, asymmetric Pauson-Khand reaction. We have successfully characterized complexes of the type [Co2(alkyne)(binap)(CO)4] (BINAP=(1,1'-binaphthalene)-2,2'-diylbis(diphenylphosphine)) and shown that diastereomer interconversion occurs under Pauson-Khand reaction conditions when alkyne=HC[triple bond]CCO2Me. Attempts to isolate [Co2(alkyne)(binap)(CO)x] complexes with coordinated alkenes led to the formation of cobaltacyclopentadiene species.     

Rhodium‐Catalyzed [3+2+2] and [2+2+2] Cycloadditions of Two Alkynes with Cyclopropylideneacetamides

It has been established that a cationic rhodium(I)/H₈‐binap complex catalyzes the [3+2+2] cycloaddition of 1,6‐diynes with cyclopropylideneacetamides to produce cycloheptadiene derivatives through cleavage of cyclopropane rings. In contrast, a cationic rhodium(I)/(S)‐binap complex catalyzes the enantioselective [2+2+2] cycloaddition of terminal alkynes, acetylenedicarboxylates, and cyclopropylideneacetamides to produce spiro‐cyclohexadiene derivatives which retain the cyclopropane rings.     

Kinetic Studies Prove High Catalytic Activity of a Diene–Rhodium Complex in 1,4‐Addition of Phenylboronic Acid to α,β‐Unsaturated Ketones

In the 1,4‐addition of phenylboronic acid to α,β‐unsaturated ketones, [Rh(OH)(cod)]₂ has a much higher catalytic activity than [Rh(OH)(binap)]₂ (cod=1,5‐cyclooctadiene, binap=2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl). Kinetic studies revealed that the rate‐determining transmetalation step in the catalytic cycle has a large rate constant when [Rh(OH)(cod)]₂ is used.     

A study of (binap)(enyne)tetracarbonyldicobalt(0) complexes

Four (binap)(enyne)tetracarbonyldicobalt(0) complexes have been synthesised and their reactivity monitored by variable temperature (31)P NMR spectroscopy. Formation of (binap)dicarbonylhydridocobalt(-1) 12 occurred at temperatures between 35 and 55 degrees C, depending on the nature of the alkene and alkyne components of the enyne. The structure of 12 was determined by X-ray crystallography, and its presence under Pauson-Khand reaction conditions was verified by NMR spectroscopy.     

Catalytic cycle of rhodium-catalyzed asymmetric 1,4-addition of organoboronic acids. Arylrhodium, oxa-pi-allylrhodium, and hydroxorhodium intermediates

The catalytic cycle of asymmetric 1,4-addition of phenylboronic acid to an alpha,beta-unsaturated ketone catalyzed by a rhodium-binap complex was established by use of RhPh(PPh(3))(binap) as a key intermediate. The reaction proceeds through three intermediates, phenylrhodium, oxa-pi-allylrhodium, and hydroxorhodium complexes, all of which were observed in NMR spectroscopic studies. The transformations between the three intermediates, that is, insertion, hydrolysis, and transmetalation, were also observed. On the basis of the catalytic cycle, a more active chiral catalyst, [Rh(OH)(binap)](2), was found and used successfully for the asymmetric 1,4-addition reactions.     

Recent topics in catalytic asymmetric hydrogenation of ketones

Asymmetric hydrogenation of ketones (AHK) was revolutionized in 1987 and again in 1995 when Ru(CH₃COO)₂(binap)/HCl and RuCl₂(binap)/diamine, respectively, were developed. Since then, the number of reports on Ru-catalyzed AHK has increased exponentially, and the utility of other precious metals (Os, Rh, Ir, and Pd) has also been shown. The utilization of inexpensive base metals (Fe, Co, Ni, and Cu) has been a recent trend. This digest summarizes the key advances in AHK in the past decade by categorizing the chiral ligands into six types: (i) diphosphines, (ii) diphosphines/diamines, (iii) tridentate or tetradentate phosphine amines, (iv) diamines, (v) tetradentate amines, and (vi) tetradentate thioether amines.     

Transition States of Binap–Rhodium(I)‐Catalyzed Asymmetric Hydrogenation: Theoretical Studies on the Origin of the Enantioselectivity

By using the hybrid IMOMM(B3LYP:MM3) method, we examined the binap–Rh^I‐catalyzed oxidative‐addition and insertion steps of the asymmetric hydrogenation of the enamide 2‐acetylamino‐3‐phenylacrylic acid. We report a path that is energetically more favorable for the major enantiomer than for the minor enantiomer. This path follows the “lock‐and‐key” motif and leads to the major enantiomeric product via an energetically favorable binap–dihydride–Rh^III–enamide complex. Our theoretical results are consistent with the mechanism that takes place via Rh^III dihydride formation, that is, oxidative addition of H₂ followed by enamide insertion.     

BINAP/1,4-diamine-ruthenium(II) complexes for efficient asymmetric hydrogenation of 1-tetralones and analogues

A combined system of a RuCl(2)(binap)(1,4-diamine) complex and t-C(4)H(9)OK in i-C(3)H(7)OH catalyzes enantioselective hydrogenation of various 1-tetralone derivatives and some methylated 2-cyclohexenones. Hydrogenation of 2-methyl-1-tetralone under dynamic kinetic resolution gives the cis alcohol with high ee. [reaction: see text]     

Reductive dimerization of dialkyl acetylenedicarboxylate catalyzed by [Rh(binap)(MeOH)2]ClO4 in methanol

Cationic Rh(I) complex [Rh(binap)(MeOH)₂]ClO₄ catalyzes reductive dimerization of dialkyl acetylenedicarboxylates 1 to give 1,2,3,4-tetrakis(alkoxycarbonyl)-1,3-butadienes 2 in methanol selectively.     

Synthesis and Characterization of Chiral Bis(aminato)iridate(I) and Aminato‐Bridged Iridium(I) Complexes

The two dinuclear Ir^I complexes [Ir₂(μ‐Cl)₂ {(R)‐(S)‐PPF‐PPh₂}₂] ( 1 ; (R)‐(S)‐PPF‐PPh₂=(S)‐1‐(diphenylphosphino)‐2‐[(R)‐1‐(diphenylphosphino)ethyl]ferrocene and [Ir₂(μ‐Cl)₂{(R)‐binap}₂] ( 3 ; (R)‐binap=(R)‐[1,1′‐binaphthalene]‐2,2′‐diylbis[diphenylphosphine]) smoothly react with 4 equiv. of the lithium salt of aniline to afford the new bis(anilido)iridate(I) (=bis(benzenaminato)iridate(1‐)) complexes Li[Ir(NHPh)₂{(R)‐(S)‐PPF‐PPh₂}] ( 4 ) and Li[Ir(NHPh)₂{(R)‐binap}] ( 5 ), respectively. The anionic complexes 4 and 5 react upon protonolysis to give the dinuclear aminato‐bridged derivatives [Ir₂(μ‐NHPh)₂{(R)‐(S)‐PPF‐PPh₂}₂] ( 6 ) and [Ir₂(μ‐NHPh)₂{(R)‐binap}₂] ( 7 ), which were characterized by X‐ray crystallography. None of the new complexes 4 – 7 shows catalytic activity in the hydroamination of olefins.     

Rhodium‐Catalyzed [2+2+2] Cycloaddition of Diynes with Carbodiimides and Carbon Dioxide under Ambient Conditions

It has been established that a cationic rhodium(I)/H₈‐binap complex is able to catalyze the [2+2+2] cycloaddition of diynes with carbodiimides and carbon dioxide under ambient conditions. Enantio‐ and/or regioselective variants of these reactions are also disclosed.     

The Hydrogenation/Transfer Hydrogenation Network in Asymmetric Reduction of Ketones Catalyzed by [RuCl2(binap)(pica)] Complexes

Chiral binap/pica‐Ru^II complexes (binap=(S)‐ or (R)‐2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl; pica=α‐picolylamine) catalyze both asymmetric hydrogenation (AH) of ketones using H₂ and asymmetric transfer hydrogenation (ATH) using non‐tertiary alcohols under basic conditions. The AH and ATH catalytic cycles are linked by the metal–ligand bifunctional mechanism. Asymmetric reduction of pinacolone is best achieved in ethanol containing the Ru catalyst and base under an H₂ atmosphere at ambient temperature, giving the chiral alcohol in 97–98 % ee. The reaction utilizes only H₂ as a hydride source with alcohol acting as a proton source. On the other hand, asymmetric reduction of acetophenone is attained with both H₂ (ambient temperature) and 2‐propanol (>60 °C) with relatively low enantioselectivity. The degree of contribution of the AH and ATH cycles is highly dependent on the ketone substrates, solvent, and reaction parameters (H₂ pressure, temperature, basicity, substrate concentration, H/D difference, etc.).     

Efficient enantioselective synthesis of (2R,3R)- and (2S,3S)-3-hydroxyleucines and their diastereomers through dynamic kinetic resolution

(2R,3R)- and (2S,3S)-3-Hydroxyleucines, components of cyclodepsipeptides, papuamides and polyoxypeptins, were efficiently synthesized along with their diastereomers from the corresponding β-keto-α-amino acid ester through dynamic kinetic resolution using RuCl₂(binap)-catalyzed hydrogenation.     

Mechanism of catalytic asymmetric hydrogenation of 2-formyl-1-methylene-1,2,3,4-tetrahydroisoquinoline using Ru(CH3COO)2[(S)-binap]

The mechanism of the asymmetric hydrogenation of 2-acyl-1-alkylidene-1,2,3,4-tetrahydroisoquinolines, the first reported reaction with the Noyori-Takaya Ru(CH₃COO)₂(binap) complex, has been investigated by means of deuterium labeling, kinetics, and NMR analysis. A series of experiments has revealed that (1) a monohydride-unsaturated mechanism operates involving the initial formation of RuH followed by reaction with the enamide substrate, (2) the hydride transfer from RuH to the olefinic double bond is endothermic and reversible, and (3) the rate is determined in the hydrogenolysis step. This view is consistent with that of proposed for the BINAP-Ru catalyzed Kagan reaction.     

Preparation of an amphiphilic resin-supported BINAP ligand and its use for rhodium-catalyzed asymmetric 1,4-addition of phenylboronic acid in water

[reaction: see text] The axially chiral bisphosphine ligand, 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl (binap), was supported on a polystyrene-poly(ethylene glycol) copolymer (PS-PEG) resin and was used successfully for the rhodium-catalyzed asymmetric 1,4-addition of phenylboronic acid to alpha,beta-unsaturated ketones in water.     

A First‐Principles Examination of the Asymmetric Induction Model in the Binap/RhI‐Catalysed 1,4‐Addition of Phenylboronic Acid to Cyclic Enones by Density Functional Theory Calculations

First‐principles modelling of the diastereomeric transition states in the enantiodiscrimination stage of the catalytic cycle can reveal intimate details about the mechanism of enantioselection. This information can be invaluable for further improvement of the catalytic protocols by rational design. Herein, we present a density functional theory (IEFPCM/PBE0/DGDZVP level of theory) modelling of the carborhodation step for the asymmetric 1,4‐arylation of cyclic α,β‐unsaturated ketones mediated by a [(binap)Rh^I] catalyst. The calculations completely support the older, qualitative, pictorial model predicting the sense of the asymmetric induction for both the chelating diphosphane (binap) and the more recent chiral diene (Phbod) ligands, while also permitting quantification of the enantiomeric excess (ee). The effect of dispersion interaction correction and basis sets has been also investigated. Dispersion‐corrected functionals and solvation models significantly improve the predicted ee values.     

Synthesis of Citronellal by RhI‐Catalysed Asymmetric Isomerization of N,N‐Diethyl‐Substituted Geranyl‐ and Nerylamines or Geraniol and Nerol in the Presence of Chiral Diphosphino Ligands,under Homogeneous and Supported Conditions

For the asymmetric isomerization of geranyl‐ or neryldiethylamine ((E)‐ or (Z)‐ 1 , resp.) and allyl alcohols geraniol or nerol ((E)‐ or (Z)‐ 2 , resp.) to citronellal ( 4 ) in the presence of a [Rh^I(ligand)cycloocta‐1,5‐diene)]⁺ catalyst, the atropic ligands 5 – 11 are compared under homogeneous and polymer‐supported conditions with the non‐C₂‐symmetrical diphosphino ferrocene ligands 12 – 16 . The ^tBu‐josiphos ligand 13 or daniphos ligand 19 , available in both antipodal series, already catalyse the reaction of (E)‐ 1 at 20° (97% e.e.) and favourably compare with the binap ligand 5 (see Table 1). Silica‐gel‐ or polymer‐supported diphosphino ligands usually afford similar selectivity as compared to the corresponding ligands applied under homogeneous conditions, but are generally less reactive. In this context, a polymer‐supported ligand of interest is the polymer‐anchored binap (R)‐ 6 , in terms of reactivity, selectivity, and recoverability, with a turnover of more than 14400.     

Designing New α,β‐Unsaturated Thioesters for the Catalytic,Enantioselective Friedel?Crafts Alkylation of Indoles

A new class of α,β‐unsaturated S‐(1,3‐benzoxazol‐2‐yl) thioesters of type 2 have been synthesized and effectively employed as electrophiles in the stereoselective alkylation of indoles. The combination of electronic as well as steric properties of such Michael acceptors allowed us to carry out Friedel? Crafts alkylations of various substituted indoles in the presence of a catalytic amount (20 mol‐%) of chiral cationic [Pd^II(Tol‐binap)] complexes. With the optimized catalytic system (PdCl₂(MeCN)₂/Tol‐binap/AgSbF₆), the desired β‐indolyl‐substituted thioderivatives 4 were obtained in good yield, with an enantiomeric excess (ee) of up to 86%. The remarkable versatility of the enantiomerically enriched thioesters 4 was demonstrated by quantitatively transforming them into optically active β‐indolyl esters and amides under mild conditions. With this stereoselective, catalytic Friedel? Crafts reaction, we open up the way towards new α,β‐unsaturated compounds that could be suitable candidates for the preparation of a number of optically active β‐substituted carboxylic compounds.