First Total Synthesis of Hyacinthacine A6 from the Protected Derivative of Polyhydroxylated Pyrrolidine

（1S、2R、3R、5R、7aR）-1,2-Dihydroxy-3-hydroxy methyl-5-methylpyrrolizidine（hyacinthacine A6, I） was synthesized by Wittig＇s methodology via the reaction of aldehyde 6, prepared from the partially protected derivative of polyhydroxylated pyrrolidine, with appropriated ylides, followed by cyclization through the intemal reductive amination process of the resulting a,B-unsaturated ketone 7, and total deprotection.     

Research on 1-azabicyclic systems

Epimeric 3-methylpyrrolizidines were separated preparatively. Competitive quaternization of the mixture of isomers with n-propyl iodide and catalytic isomerization were used to obtain trans-3, 8-H-3-methylpyrrolizidine. cis-3,8-H-3-Methylpyrrolizidine was isolated from the mixture by quaternization with benzyl chloride and subsequent hydrogenolysis of the resulting quaternary salt. The pK_a values of trans- and cis-3,8-H-3-methylpyrrolizidines, pyrrolizidine, and indolizidine were measured. It is shown that in a series of saturated amines with a tertiary nitrogen atom pyrrolizidine and 3-methylpyrrolizidines are among the strongest bases.See [1] for communication XII.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1060–1064, August, 1976.     

Total synthesis of natural (+)-hyacinthacine A6 and non-natural (+)-7a-epi-hyacinthacine A1 and (+)-5,7a-diepi-hyacinthacine A6

Naturally occurring (1S,2R,3R,5R,7aR)-1,2-dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine [(+)-hyacinthacine A₆, 2] together with unnatural (1S,2R,3R,7aS)-1,2-dihydroxy-3-hydroxymethylpyrrolizidine [(+)-7a-epi-hyacinthacine A₁, 3] and (1S,2R,3R,5S,7aS)-1,2-dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine [(+)-5,7a-diepi-hyacinthacine A₆, 4] have been synthesized from a DALDP derivative [5, (2R,3S,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine], as the homochiral starting material. The synthetic process employed took advantages of Wittig methodology followed by internal lactamization, in the case of (+)-7a-epi-hyacinthacine A₁ (3), and reductive amination for (+)-hyacinthacine A₆ (2) and (+)-5,7a-diepi-hyacinthacine A₆ (4).     

Total synthesis of the 5-epimers of naturally occurring (−)-hyacinthacine A5 and unnatural (+)-hyacinthacine A4

(1R,2S,3R,5S,7aR)-1,2-Dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine 10 [(+)-5-epihyacinthacine A₅] and (1R,2S,3R,5S,7aS)-1,2-dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine 17 [ent-5-epihyacinthacine A₄] have been synthesized by either Horner–Wadsworth–Emmons (HWE) or Wittig methodology using aldehydes 6 and 13, prepared from (2R,3S,4R,5R)-3,4-dibenzyloxy-N-benzyloxycarbonyl-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine 5 (partially protected DALDP) and (2R,3S,4R,5S)-3,4-dibenzyloxy-N-benzyloxycarbonyl-2,5-bis(hydroxymethyl)-2′-O-pivaloylpyrrolidine 12 (partially protected DGADP), respectively, and the appropriated ylide, followed by cyclization through an internal reductive amination process of the corresponding intermediate pyrrolidinic ketones 7 and 14 and subsequent deprotection.     

Polyhydroxylated pyrrolizidines. Part 4: Total asymmetric synthesis of unnatural hyacinthacines from a protected derivative of DGDP

(1R,2R,3S,5R,7aR)-1,2-Dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine [(+)-3-epi-hyacinthacine A₃] 1 and (1R,2R,3S,7aR)-1,2-dihydroxy-3-hydroxymethylpyrrolizidine [(+)-3-epi-hyacinthacine A₂] 2 have been synthesized by Wittig's methodology using aldehyde 6, prepared from (2R,3R,4R,5S)-3,4-dibenzyloxy-N-benzyloxycarbonyl-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl) pyrrolidine 3 (a partially protected DGDP), and the appropriated ylides, followed by cyclization through an internal reductive amination process of the resulting α,β-unsaturated ketone 7 and aldehyde 8, respectively, and total deprotection.     

Polyhydroxylated pyrrolizidines. Part 8. Enantiospecific synthesis of looking-glass analogues of hyacinthacine A5 from DADP

(1R,2S,3S,5R,7aR)-1,2-Dihydroxy-3-hydroxymethyl-5-methylpyrrolizidine[(−)-3-epihyacinthacine A₅, 1a] and (1S,2R,3R,5S 7aS)-1,2-dihydroxy-3-hydroxymethylpyrrolizidine[(+)-3-epihyacinthacine A₅, 1b] have been synthesized either by Wittig's or Horner-Wadsworth-Emmond's (HWE's) methodology using aldehydes 4 and 9, both prepared from (2S,3S,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine (2, partially protected DADP), and the appropriate ylides, followed by cyclization through an internal reductive amination process of the resulting α,β-unsaturated ketones 5 and 10, respectively, and total deprotection.     

New semiconducting oxide photoanodes for water splitting in a photoelectrochemical cell Electrochemistry of n-type NiTiO3

The electrochemical behaviour of NiTiO₃ has been studied. The interest in this mixed-metal oxide lays in its possible use for solar-energy conversion. Anodic oxidation of NiTi0₃ was very irreversible. The electrode became aged, probably due to formation of a porous film of an irreducible higher oxide. The stirring-independent Cottrell behaviour of the anodic oxidation of NiTiO₃ should be due to current limitation by diffusion of a reaction product away from the NiTi0₃ surface through this irreducible higher oxide, which should be of a porous nature. The diffusion-limiting species could not be OH^?, as the Cottrell slopes only increased by about five times for a pH increase from 3 to 14. Five and two processes were involved in the anodic oxidation of NiTiO₃ at pH 14 and 3 respectively, as determined by chronopotentiometry. The same number of processes appeared upon inversion of the current.     

Improved Synthesis of 3-Nitrophenylacetic Acid

In the development of certain work in our laboratory, we needed large quantities of 3-nitrophenylacetic acid. This material is very expensive commercially. It therefore became necessary to find a convenient and efficient process since none of the reported procedures is suitable for a large scale preparation of 3-nitrophenylacetic acid. In the first synthesis reported by Frederick et al.¹, 3-nitrobenzyl chloride was converted to 3-nitrophenylaceto-nitrile which was hydrolyzed to 3-nitrophenylacetic acid in 38% yield. The utility of this method for making large quantities of 3-nitrophenylacetic acid is restricted by the high cost of 3-nitrobenzyl halides. The second 2 method published by Jennings² is a multistep process starting with 3-nitrobenzaldehyde and the reported overall yield is 31%. This method also is not suitable for a large scale preparation due to the hazardous nature of the acid azide which is formed as one of the intermediates in this five step sequence. The third method describes the conversion of 3-nitroacetophenone to 3-nitrophenyl-acetic acid by willgerodt reaction.³ Although the starting material 3-nitroacetophenone is inexpensive but the reported yield of 3-nitrophenylacetic acid is only 7%. The high temperature required in the willgerodt reaction causes the reduction of nitro group by sulfur resulting in a bad mixture thus lowering the yield of nitrothio-morpholide (3) and making its isolation difficult.     

Preparation and electronic properties of monolayer tungsten oxide on silica particles

Monolayer tungsten oxide on silica particles was prepared by a controlled hydrolysis technique. The material displays a bandgap which is 0.3 eV higher in energy than that for bulk WO₃. The quasi-Fermi level for electrons, in this material, as determined by electrochemical measurements, is 170 mV more negative for SiO₂/WO₃ than that for particulate WO₃.     

Validated TLC-densitometry method for the simultaneous analysis of pyrethroid insecticides in agricultural and domestic products

Background

For therapeutic monitoring and pharmacokinetic studies of lenalidomide (LND), the potent drug for treatment of multiple myeloma (MM), a specific antibody was required for the development of a sensitive immunoassay system for the accurate determination of LND in plasma.

Results

In this study, a hapten of LND (N-glutaryl-LND) was synthesized by introducing the glutaryl moiety, as a spacer, into the primary aromatic amine site of the LND molecular structure. The structure of the hapten (G-LND) was confirmed by mass, ¹H-NMR, and ¹³C spectrometric techniques. G-LND was coupled to each of bovine serum albumin (BSA) and keyhole limpet hemocyanin (KLH) proteins by ethyl-3-(3-dimethylaminopropyl) carbodiimide as a coupling reagent. LND-KLH conjugate was used as an immunogen. Four female 2-3 months old New Zealand white rabbits were immunized with an emulsion of LND-KLH with Freund`s adjuvant. The immune response of the rabbits was monitored by direct enzyme-linked immunosorbent assay (ELISA) using LND-BSA immobilized onto microwell plates as a solid phase. The rabbit that showed the highest antibody titer and affinity to LND was scarified and its sera were collected. The IgG fraction was isolated and purified by affinity chromatography on protein A column. The specificity of the purified antibody for LND was evaluated by indirect competitive ELISA using dexamethasone as a competitor as it is used with LND in a combination therapy.

Conclusions

The high affinity of the antibody (IC₅₀ = 10 ng/mL) will be useful in the development of an immunoassay system for the determination of plasma LND concentrations. Current research is going to optimize the assay conditions and validate the procedures for the routine application in clinical laboratories.     

The effect of a radical scavenger on the propagation of flames in an exothermic-endothermic system

The propagation of a premixed laminar flame supported by an exothermic chemical reaction under adiabatic conditions but subject to inhibition through parallel endothermic chemical processes is considered. These consist of the endothermic decomposition of an inhibitor W leading to the formation of a ‘radical scavenger’ S, which acts as a catalyst for the removal of active radicals X through an additional termination step. The heat loss through the endothermic reaction and the action of the radical scavenger, represented by the parameters α and ρ, both have a strong quenching effect on wave propagation. The dependence of the flame velocity c on α and ρ is determined by numerical integration of the flame equations for a range of values of the other parameters. The (ρ ,c) curve can have at least one turning point, the (α,c) curve can be monotone or it can have one or three turning points, depending on the values of the parameters β, representing the rate at which inhibitor is consumed, μ, the ratio of the activation energies of the reactants and the Lewis numbers. The additional feature caused by the scavenger is that the (α, c) curve has a turning point for any (μ, β) parameter pair if ρ is sufficiently large. A new feature of the model is that, for non-zero values of ρ, there can be four solutions below critical values of α. This behaviour is confirmed by a high activation energy analysis, which also reveals some additional features of the flame structure resulting from the presence of the radical scavenger.AMS subject classification: 80A25, 35K57, 35B32     

Micro-structural optimization of supported γ-alumina membranes

The micro-structural integrity of meso-porous inorganic membranes is of critical importance in their prolonged application. Inspection by transmission electron microscopy of state-of-the-art γ-alumina membrane cross-sections, made by focused ion beam milling, reveals structural defects which adversely affect performance, reproducibility, and lifetime. It is shown that the use of macro-porous supports with a smooth, defect-free deposition surface for membrane dip coating, in combination with purified precursor sols and clean processing, leads to major improvements in micro-structural homogeneity and properties of the membranes. Large particle contaminants/agglomerates can be effectively removed from precursor sols by high-speed centrifugation or ultrasound-assisted screening. While centrifugation is the most practical method for routine use, filter screening provides a more complete removal of agglomerates and larger particles (>80 nm Ø). Application of the purified membrane precursor sols results in membranes in which connected pore defects (pinholes) are no longer detectable for a membrane thickness of >500 nm thick. The almost complete absence of connected pinholes, obtained with improved membrane processing, is demonstrated by near-100% retention of CaCl₂ in aqueous solution by nano-filtration. The γ-alumina processing experience, collected in our group in the years 2002–2006, is accumulated in a 34-step processing protocol for γ-alumina membranes with a >500 nm single layer thickness.     

A systematic preparation of new contracted Gaussian- type orbital sets. VII. MINI-3, MINI-4, MIDI-3, and MIDI-4 sets for transition metal atoms

Two minimal contracted Gaussian-type orbital (CGTO ) sets are developed for the transition metal atoms. The expansion terms for the first set, MINI -3, are 4, 3, 3, and 3 for s-type CGTO s and others are all three. The abbreviation would be (4333/33/3) where the slash divides symmetry. The expansion terms for the other set, MINI -4, is (4333/43/4). The split-type basis sets, MIDI -3 and MIDI -4, are derived directly from MINI -3 and MINI -4, MINI -3 and MIDI -3 provide the outer-shell orbital energies which are far better than those by single-zeta (SZ ) STO s. MINI -4 and MIDI -4 provide the outer-shell orbital energies which are almost as good as those by double-zeta (DZ ) STO s. The total energies given by the present sets are better than those of SZ except for MINI -3 for Sc and Ti: the energies by MINI -4 and MIDI -4 are only 0.8–1.7 a.u. higher than DZ . The basis sets were tested on the Cu₂ molecule, where a large basis set was also used.     

Electronic structure of the radicals NF and NCl. III. The radiative lifetimes of the bΣ and aΔ states

The radiative lifetimes of the b¹Σ⁺ and a¹Δ states have been evaluated by perturbation expansions including X³Σ⁻, a¹Δ, b¹Σ⁺, 1^3,1Π, 2^3,1Π, 2³Σ⁻ and 2¹Σ⁺ states. All wavefunctions result from large MRD CI calculations. The b—X transition is dominated by the parallel transition moment; it is found to be much stronger than the a—X transition. The calculated radiative lifetimes of τ(¹Σ⁺)=18 ms, τ(¹Δ)=2.2 s for NF and τ(¹Σ⁺)=2.5–3.5 ms for NCl are in good accord with corresponding experimentally deduced values. The lifetime for the a¹Δ state in NCl is found to be τ(¹Δ)=1.1 s, ie. much longer than derived from a recent experiment. Its magnitude is consistent with the τ(b¹Σ⁺)/τ(a¹Δ) ratio of similar systems and with the decrease in lifetime from NF to NCl and is thus believed to be quite reliable. A detailed analysis of all contributions of the perturber states to the transition mechanism is made and comparison with the related data in SO, O₂ and S₂ is undertaken. The b-a transition probability dominated by the quadrupole transition is fairly constant in all the systems in the order of A = 0.013 (NF) - 0.0013 (S₂) s⁻¹.     

Synthesis and properties of trifluoromethylating steroid compounds

Trifluoromethyl steroids la,b; 2a,b; 3a,b have been synthesized by starting from estren 3,17-dicarbonyl-3,3-dimethyl ether (4) and dl-18-methyl-2(3)l5(10)-estra-diene-17-carbonyl-3-methyl ether (5),and by using trimthyltrifluoromethylsilane as the trifluoromethylating agent under the catalysis of tetrarnethylam-monium fluoride.The overall yields were 82%,76%; 54%,62%; and 27%,25%,respectively The α-configura tion of trifluoromethyl group of 17-position was determined by X-ray crystal diffraction method Compounds 1a,2a and 3a showed high affinity for rat uterus PRc.The test of biological activities of compounds 1b,2b and 3b is proceeding.     

Synthesis and anticonvulsant activity of some novel 3-aminoquinazolines

A number of novel 3-aminoquinazolines were obtained via two synthetic pathways. In the first method o-aminobenzoylhydrazines were prepared either by reacting an isatoic anhydride and a hydrazine or by reacting o-nitrobenzoic acid with a hydrazine, followed by catalytic reduction. Subsequent cyclization with an appropriate orthoester provided 3-aminoquinazolines and 2-methyl-3-aminoquinazolines. The second pathway involved condensation of o-aminoacetophenone with a hydrazine to form hydrazones which were reduced to aminohydrazines and cyclized as above to yield 4-methyl-3-aminoquinazolines and 2,4-dimethyl-3-aminoquinazolines. The title compounds were evaluated in mice in MES and sc Met seizure models for anticonvulsant activity, and in the rotorod test for neurotoxicity. They were generally toxic. However, 4-methyl-3-(N-piperidino)-3,4-dihydroquinazoline hydrochloride exhibited activity comparable to that of methaqualone.     

The development of an automated continuous measurement system for the monitoring of HCHO and CH3CHO in the atmosphere by using an annular diffusion scrubber coupled to HPLC

An automated continuous measurement system for the monitoring of formaldehyde (HCHO) and acetaldehyde (CH₃CHO) in the urban atmosphere was developed by using an annular diffusion scrubber in conjunction with a high-performance liquid chromatograph (HPLC). With this technique, atmospheric HCHO and CH₃CHO were effectively collected by the annular diffusion scrubber which consists of a porous polytetrafluoroethylene (PTFE) tube disposed concentrically within a Pyrex-glass tube and a scrubbing solution. 2,4-Dinitrophenylhydrazine (DNPH) was selected as the scrubbing solution for collecting HCHO and CH₃CHO, which are derivatized to 2,4-dinitrophenylhydrazone-formaldehyde (DNPH-HCHO) and 2,4-dinitrophenylhydrazone-acetaldehyde (DNPH-CH₃CHO), respectively. An aliquot of the sample solution was automatically injected into an HPLC equipped with a semi-micro ODS column and a UV-VIS detector for separating and determining DNPH-HCHO and DNPH-CH₃CHO. All the operations are sequenced by a programmable controller, and automated continuous measurements are performed with a typical temporal resolution of 1 h. The collection efficiencies of HCHO and CH₃CHO were about 97% and 93%, respectively, at an air flow rate of 0.2 L/min. The lower detection limits (3σ of the blank hydrazones) of HCHO and CH₃CHO were 0.05 ppbv and 0.10 ppbv, respectively, in the case of 12-L air sample volume. Analytical response of a standard solution of DNPH-HCHO and DNPH-CH₃CHO by the HPLC during a 10-day continuous measurement was unchanged and the relative standard deviation (RSD) was < 1.0%. Interferences from O₃ and NO₂ were insignificant in this annular diffusion scrubber method. Both for HCHO and CH₃CHO measurements, concentrations from this developed system well agreed with those measured by a DNPH Silica cartridge method.     

Preparation of 3-Oxo- and 3-Ethylideneazetidine Derivatives

The preparation of 3-azetidinones with different N-substituents and their transformation to 3-ethylideneazetidines has been studied in relation with a projected synthesis of 3-ethylideneazetidine-2-carboxylic acid (= polyoximic acid; 1 ). The stable crystalline 3-azetidinone hydrochloride ( 18 ), obtained by hydrogenolysis of the known 1-(diphenylmethyl)-3-azetidenone ( 4 ), is described for the first time, From this key intermediate, 3-oxoazetidine-derived amides, exemplified by benzamide 12 ,urethanes (e.g. 17 ), and ureas (e.g. 20 ) can be prepared in good yield (Scheme 3). The olefination of 3-azetidinones with alkylidene(triphenyl)phosphoranes is a perparatively useful process only for derivatives with a pyramidal N-atom, e.g. the diphenylmethyl derivative 4 , and not for the amide 12 or the urethane 17 (Scheme 4). 3-Alkylidene-azetidines with an amide N-atom should, therefore, be prepared by exchange of the N-substituent after the introduction of the double bond.     

Stability of polyvinylpolypyrrolidone against gamma-ray irradiation in HNO3 media

Polyvinylpolypyrrolidone (PVPP) is a resin with adsorption selectivity for U(VI) in HNO₃ media. The stability of this resin has been examined against gamma-ray irradiation using HNO₃ solutions of various concentrations. Samples of PVPP immersed in HNO₃ solutions up to 6 mol·dm^?3 (=M) were irradiated by a ⁶⁰Co source at 3.6 kGy·h^?1 to reach 0.90 MGy at room temperature under ambient atmosphere. As a result, no clear decrease in the capacity for U(VI) when added in 3 M HNO₃ was observed for any samples, or rather the capacity was found to increase by approximately 50 % for PVPP irradiated in 6 M HNO₃. It was indicated from some spectroscopic analyses of the irradiated samples that the irradiation causes the cleavage of the pyrrolidone ring of PVPP. This occurs by the addition of an oxygen atom originating from HNO₃, followed by the formation of straight-chain groups with multiple coordinative atoms by the successive addition of oxygen, finally leading to the generation of a primary-amine-type weakly-basic anion exchange resin. The increase in the U(VI) capacity would be due to the formation of the straight-chain groups. However, such structural changes were not observed by heating at 323 K in up to 6 M HNO₃ for 20 days. Thus, it was shown that PVPP is a heat-resistant resin.