DeNOx催化剂FeZSM－5／RaneyFe的制备

 用原位晶化法合成了FeZSM－5／RFe（RFeRaneyFe）催化剂．合成液的组成为5Na2O·100SiO2·10TPABr·7000H2O，pH＞11．5．合成液中不含Al，ZSM－5分子筛的骨架Al只来源于RaneyFe的表面．此法提高了ZSM－5分子筛中骨架Al的稳定性和分子筛上Fe离子的负载量．FeZSM－5／RFe用作DeNOx催化剂时具有较高的活性和水热稳定性．     

无胺合成[Fe]ZSM-5分子筛的结构鉴定及其催化性能的研究

不用有机胺为模板剂,在碱性介质中采用水热合成法成功地合成了[Fe]ZSM-5分子筛.用X射线衍射、透射电镜、红外光谱、顺磁共振谱、X射线光电子能谱和穆斯堡尔谱等对其结构进行了表征,结果表明,Fe原子进入了分子筛骨架,并处于四面体的配位环境.在由甲醇转化为汽油的过程中,以本文合成的[Fe]ZSM-5与用有机胺为模板剂合成的[Fe]ZSM-5分子筛为催化剂相比,其活性和选择性几乎相同,且都比通常的H[Al]ZSM-5好,C₅组分以上的选择性大于80%,且芳烃(包括脂环烃)和异构烃的含量达75%以上.     

聚集态的Fe氧化物在Fe/ZSM-5催化N2O直接分解中的作用（英文）

研究了以离子交换法制备的Fe/ZSM-5上聚合态的Fe氧化物(FeOx)在催化N2O直接分解中的作用.Fe/ZSM-5催化剂利用600–900 ℃的高纯Ar处理,使催化剂中的FeOx发生聚合.利用一系列的表征手段(XRD,BET,DRIFTS,UV/vis-DRS,XAFS,N2O脉冲和O2-TPD)对催化剂进行了表征.结果发现,分子筛骨架外的FeOx在Fe/ZSM-5催化N2O分解中起重要作用;通过研究高温处理的Fe/ZSM-5催化剂中不同FeOx的比例与催化剂活性的关系,得到多核的FeOx是催化N2O分解的主要活性物种;并且,无定形态的FeOx中键长较长的Fe–O键((Fe–O)2)是参与反应的重要物种.     

聚集态的Fe氧化物在Fe/ZSM-5催化N_2O直接分解中的作用(英文)

研究了以离子交换法制备的Fe/ZSM-5上聚合态的Fe氧化物(FeOx)在催化N2O直接分解中的作用.Fe/ZSM-5催化剂利用600–900 ℃的高纯Ar处理,使催化剂中的FeOx发生聚合.利用一系列的表征手段(XRD,BET,DRIFTS,UV/vis-DRS,XAFS,N2O脉冲和O2-TPD)对催化剂进行了表征.结果发现,分子筛骨架外的FeOx在Fe/ZSM-5催化N2O分解中起重要作用;通过研究高温处理的Fe/ZSM-5催化剂中不同FeOx的比例与催化剂活性的关系,得到多核的FeOx是催化N2O分解的主要活性物种;并且,无定形态的FeOx中键长较长的Fe–O键((Fe–O)2)是参与反应的重要物种.     

不同类型含铁分子筛上N2O催化分解反应

采用固态离子交换法制备了一系列Fe/Al摩尔比为0.33的Fe/分子筛(ZSM-35,ZSM-5,beta和mordenite (丝光沸石))样品,并利用紫外-可见漫反射光谱、原位红外光谱和可见拉曼光谱以及瞬态应答实验考察了分子筛种类对N₂O分解反应性能的影响.研究表明,经高温处理(HT)后分子筛的催化活性顺序为 Fe/ZSM-35 > Fe/beta > Fe/ZSM-5 > Fe/mordenite,与骨架外铝稳定的双核铁物种含量一致.这说明双核铁物种是高温处理后Fe/分子筛样品中N₂O分解的活性位,而它的形成与分子筛种类密切相关.Fe/ZSM-35分子筛十元环孔道中相邻两个α位和八元环孔道中相邻两个β位都能稳定两个Fe(II)离子而形成能高效分解N₂O的双核铁活性中心.Fe/beta和Fe/ZSM-5分子筛中只有落在相邻两个β位上的两个Fe(II)离子才能形成参与N₂O分解的高活性的双铁活性中心.Fe/mordenite-HT分子筛上的铁物种绝大部分以孤立Fe离子的形式存在,因此其催化N₂O分解反应活性很低.     

以异丙胺为模板剂合成ZSM-23分子筛

系统考察了异丙胺-硅溶胶-偏铝酸钠-水体系中合成ZSM-23分子筛的影响因素.结果表明,当投料SiO2/Al2O3比为60～150时能够合成出晶相单一、结晶度良好的ZSM-23分子筛.SiO2/Al2O3比、模板剂用量、体系的碱度以及水量均能影响合成产物的晶型.同时模板剂用量和SiO2/Al2O3比对ZSM-23分子筛的形貌影响很大.在优化的条件下,稳定合成了不同形貌的ZSM-23分子筛.     

无粘结剂ZSM-11催化剂上异丁烯直接胺化生成叔丁胺

叔丁胺是一种重要的化工原料和中间体,广泛应用于制备橡胶促进剂、医药、农药和着色剂等下游产品.异丁烯在分子筛催化剂上直接胺化生产叔丁胺是一个经济环保过程,其中ZSM-5和BEA分子筛的催化性能优于其它系列分子筛.ZSM-11与ZSM-5分子筛具有相似的孔道结构,我们以前的实验结果表明,与ZSM-5相比,ZSM-11表现出更优越的芳构化反应性能,在干气中乙烯低温芳构化方面也有明显优势.在此基础上,我们进行无粘结剂ZSM-11分子筛催化剂合成,并应用于异丁烯直接胺化生产叔丁胺反应.传统水热技术合成的分子筛通常为粉末,机械强度不能达到实际应用的要求,在工业化过程中分子筛粉末一般需要加入粘结剂成型使其具备一定的机械强度和形状,但是粘结剂会降低分子筛催化剂的活性和选择性,有可能会引发一些副反应,因此无粘结剂分子筛催化剂引起人们广泛关注.无粘结剂分子筛是指分子筛颗粒中不含惰性粘结剂或只含有少量粘结剂,主要依靠分子筛晶粒间的相互作用支撑存在,具有一定形状、尺寸和机械强度的催化材料.无粘结剂分子筛催化剂中分子筛含量较高,可利用的有效表面积较大,在离子交换及工业催化等方面具有明显优势.本文采用水热合成的ZSM-11分子筛原粉与二氧化硅机械混合(ZSM-11/SiO2=70/30)挤条后,通过气固相合成法制备了无粘结剂ZSM-11分子筛催化剂(Cat-C).作为对比,还分别制备了ZSM-11和SiO2机械混合(ZSM-11/SiO2=70/30)样品HZSM-11+SiO2及ZSM-11和氧化铝机械混合(ZSM-11/Al2O3=70/30)样品HZSM-11+Al2O3.利用X射线衍射、透射电镜、NH3程序升温脱附和吸附吡啶红外光谱等对分子筛催化剂的物理化学性能进行了表征.同时,以这些分子筛样品为催化剂,在固定床反应装置上进行了异丁烯胺化反应评价,反应条件为270℃,5.0 MPa,氨烯比为4和异丁烯空速0.5 h?1.结果表明,与HZSM-11+SiO2和HZSM-11+Al2O3相比,Cat-C上叔丁胺生成速率最高.关联催化剂物化性能和反应性能发现,催化剂孔道结构与叔丁胺生成并不存在明显的关联性,而较多的Br?nsted酸和较少的Lewis酸才是Cat-C具有良好反应性能的主要原因.具有一定机械强度的无粘结剂ZSM-11分子筛催化剂制备简单,在异丁烯直接胺化过程中叔丁胺生成速率高,具有很好的工业化应用前景.     

GaZSM-5分子筛的合成、表征及其在甲醇转化制烃(MTH)反应中的催化性能

通过水热合成法制得不同硅镓比的GaZSM-5分子筛,经酸交换后压片成型,得到甲醇转化制烃类的Ga ZSM-5催化剂。采用XRD、SEM、FT-IR、XPS、ICP、低温氮气吸附-脱附、NH_3-TPD和Py-FTIR技术对其进行了表征,并在连续流动固定床反应器上进行MTH反应性能评价。结果表明,分子筛中Ga物种主要以骨架Ga和骨架外表面游离态的Ga2O3两种状态存在。凝胶Si O2/Ga_2O_3配比为60合成所得GaZSM-5分子筛催化剂酸性适中,酸量为0.62 mmol NH_3/g,B酸和L酸比值为4.88,形成较大的晶间介孔孔容,达到0.51 cm~3/g;具有高的M TH活性稳定性,在相同评价条件下,催化剂寿命最高可达到456 h。与Al ZSM-5相比,Ga ZSM-5的酸性弱,能够抑制积炭生成;纳米GaZSM-5的晶间介孔改善了扩散性能,进一步提高反应活性稳定性,催化剂寿命延长120 h。     

甘油脱水合成丙烯醛ZSM-5催化剂的孔结构和酸性调控

研究了ZSM-5 孔结构和表面酸性对甘油脱水合成丙烯醛反应性能的影响. 在碱浓度为0.2 mol·L^-1的NaOH溶液中, 分别在65和85 ℃条件下对ZSM-5进行化学刻蚀, 成功地制备了含微介孔的ZSM-5催化剂, 提高了催化剂的表面强酸密度. 碱处理后的ZSM-5催化剂在甘油脱水反应中的稳定性得到显著提高, 在ZSM-5-at85 (经85 ℃碱处理的ZSM-5)催化剂上甘油转化率在反应10 h 后仍可保持95%以上, 丙烯醛选择性达到78%. 采用N₂吸附-脱附等温线、X射线粉末衍射(XRD)、²⁷Al 固体核磁共振(²⁷Al MAS-NMR)和透射电子显微镜(TEM)等手段对ZSM-5 结构和表面性质进行了表征, 实验结果表明在碱处理过程中骨架中的硅发生了溶脱现象, 在分子筛表面上形成了大量介孔, 但是ZSM-5 的MFI 拓扑结构没有发生变化, 骨架中的大部分铝得到保持. X射线光电子能谱(XPS)、X射线荧光光谱(XRF)和氨气程序升温脱附(NH₃-TPD)证实了在碱处理后ZSM-5分子筛外表面的Si/Al 摩尔比低于其骨架中的比例, 由此表明脱硅现象主要发生在ZSM-5 的外表面, 在新产生的介孔区域由于Si/Al 摩尔比的降低使得强酸密度得到提高. 具有微介孔结构和较高酸密度的ZSM-5催化剂增强了反应物扩散性能和容碳能力, 这对于提高甘油脱水合成丙烯醛催化剂的活性和稳定性起到了关键作用.     

蒸汽辅助结晶法合成多级孔整体型ZSM-5分子筛

多级孔分子筛由于其高的比表面积、良好的传质性能和可调控的孔径等特性,引起了广大科研工作者的研究兴趣.近年来,通过选择性脱除骨架硅或铝,成功合成了多级孔沸石分子筛材料.但是由于骨架原子的脱除使分子筛的结晶度降低,进而使其催化效率降低.通过硬模板法(如炭黑、介孔硅球、气凝胶等),也用于合成多级孔沸石分子筛.然而,这种方法制备过程较为复杂,且成本较高.因此,亟需发展新的多级孔分子筛的制备方法.此外,在工业应用中,沸石分子筛催化剂通常需要做成整体柱状或片形以消除固定床反应器的床层压降.合成整体型沸石分子筛的传统方法是在沸石分子筛成型过程中添加SiO2和Al2O3等无机粘结剂.虽然该方法简单易行,但沸石分子筛的孔道结构容易被破坏,而且无机粘结剂的存在使分子筛活性中心的密度减少.为了解决这些问题,合成整体型多级孔沸石分子筛,不仅具有较强的机械稳定性,适应于工业,而且其多级孔道有利于分子的扩散,从而具有较高的催化活性.针对上述问题,我们以海绵作为模板,通过蒸汽辅助结晶(steam-assisted crystallization,SAC)方法,制备具有多级孔道的整体型ZSM-5分子筛.通过X射线衍射(XRD)、氮吸附脱附、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、固态核磁共振和氨气的程序升温脱附(NH3-TPD)等手段对分子筛进行了结构与性质表征.XRD和固态核磁共振的结果表明,成功合成了不同Si/Al的ZSM-5分子筛.SEM和TEM结果进一步确定了合成的整体型多级孔ZSM-5分子筛(记作M-ZSM-n,n代表Si/Al的摩尔比),由于分子筛颗粒的堆积形成的介孔,海绵模板提供的固体骨架形成的大孔,分子筛本身的微孔,共同构成了微孔-介孔-大孔的整体型ZSM-5分子筛.透射电子显微镜上配备的X射线能谱仪(EDS)结果表明,分子筛中的Si和Al元素能够均匀的分布.氮吸附脱附证明所得整体型分子筛具有明显的介孔结构.NH3-TPD结果表明,不同Si/Al的整体型多级孔ZSM-5分子筛具有不同强度的酸性,其酸性强度:ZSM-5(60)相似文献   

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.