Adsorption of -histidine on copper surface as evidenced by surface-enhanced Raman scattering spectroscopy

The adsorption of -histidine on a copper electrode from H₂O- and D₂O-based solutions is studied by means of surface-enhanced Raman scattering (SERS) spectroscopy. Different adsorption states of histidine are observed depending upon pH, potential, and the presence of the SO²⁻₄ and Cl⁻ ions. In acidic solutions of pH 1.2 the imidazole ring of the adsorbed histidine remains protonated and is not involved in the chemical coordination with the surface. The SO²⁻₄ and Cl⁻ ions compete with histidine for the adsorption sites. In solutions of pH 3.1 three different adsorption states of histidine are observed depending on the potential. Histidine adsorbs with the protonated imidazole ring oriented mainly perpendicularly to the surface at potentials more positive than −0.2 V. Transformation of that adsorption state occurs at more negative potentials. As this takes place, histidine adsorbs through the α-NH₂ group and the neutral imidazole ring. The Cl⁻ ions cause the protonation and detachment of the α-NH₂ group from the surface and the formation of the ion pair NH⁺₃ … Cl⁻ can be observed. In the neutral solution of pH 7.0 histidine adsorbs through the deprotonated nitrogen atom of the imidazole ring and the α-COO⁻ group at E ≥ −0.2 V. However, this adsorption state is transformed into the adsorption state in which the α-NH₂ group and/or neutral imidazole ring participate in the anchoring of histidine to the surface, once the potential becomes more negative. In alkaline solutions of pH 11.9 histidine is adsorbed on the copper surface through the neutral imidazole ring.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

Adsorption of Cl<Superscript>−</Superscript> ions on γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> oxide from nitrate solutions

The adsorption of chloride ions on γ-Fe₂O₃ oxide (maggemite) from nitrate solution is studied using the method of potentiometric titration and an ion-selective electrode. The specific character of adsorption is determined. It is shown that the maggemite surface coverage with Cl^? ions increases with increasing concentration of ions in the solution, decreasing pH value, and increasing potential. The adsorbability of ions changes drastically in the pH range about pH₀ (γ-Fe₂O₃)6.2. It is found that the adsorption of chloride ions from neutral nitrate solution exponentially increases in the potential range from 0.1 to 1.0 V. The type of adsorption isotherm and the adsorption parameters are determined. It is found that, in the absence of external polarization, the concentration dependences of adsorption of Cl^? ions are complex-shaped, and their initial portions are described by the Langmuir isotherm. Further increase of adsorption is explained by the penetration of Cl^? ions inwards the oxide.     

The electrical double layer on oxides: Specific adsorption of chloride and methylviologen on ruthenium dioxide

The double-layer properties of colloidal RuO₂, prepared by thermal decomposition of RuCl₃ at 420°C, have been studied by potentiometric acid-base titrations in combination with electrophoretic mobility measurements. The point of zero charge (pzc) in KNO₃ solutions was found to be pH 5.75 ± 0.05, and the isoelectric point (iep) is positioned at pH 5.8. From the total capacitance of the double layer at the pzc an electrochemical surface area of 21.5 m²/g has been found, which is equal to the BET surface area. The capacitance of the inner part of the double layer (C_i) is 300 μF/cm², which is high compared to C_i on AgI and Hg, but of the same order as that commonly found for oxides. This subject is briefly discussed. The surface charge (σ₀) as a function of pH could be fitted satisfactorily with a simple double-layer model. In the presence of KCl the pzc and the iep are shifted to higher and lower pH, respectively, indicating specific adsorption of Cl⁻ ions. The ionic composition of the double layer as a function of σ₀ and the specific adsorption of Cl⁻ at the pzc have been calculated by a straightforward thermodynamic analysis combined with diffuse double-layer theory. Methylviologen (MV²⁺) also adsorbs specifically and at negative surface charges superequivalent adsorption can take place. In the presence of an excess of KNO₃, specific adsorption of MV²⁺ is no longer noticeable. Some consequences for the catalytic reduction of water by RuO₂ in the presence of MV²⁺ are considered.     

A study by voltammetry and the photocurrent response method of copper electrode behavior in acidic and alkaline solutions containing chloride ions

The electrochemical behavior of Cu electrodes in Cl⁻ solutions was studied in a wide range of pH. The results were compared with those obtained in solutions containing F⁻, Br⁻, I⁻ and So²⁻₄ ions at pH 8.5, and discussed in terms of the competitive formation of Cu₂O and CuCl films on the Cu surface and the influence of CuCl on the properties of Cu₂O. At pH 8.5 or higher, Cu₂O was formed first, whereas at pH 5.7 or lower the Cu₂O film was formed on the Cu surface under the CuCl layer which was formed initially. It is believed that the Cu₂O films doped with Cl⁻ ions exhibited poor protective properties against Cu corrosion.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

Hydrogen bonding between a water molecule and electronegative additives (O or Cl) on a Pt(111) surface

Water adsorption on Pt(111) surfaces treated with oxygen or hydrogen chloride at 20 K has been studied by Fourier transform infrared spectroscopy and scanning tunneling microscopy. Water molecules chemisorb predominantly on the sites of the electronegative additives (O or Cl^-), forming hydrogen bonds of O-HO or O-HCl^-. On a Pt(111)-2×2-O surface, water adsorption produces species (O(D₂O)), monomeric water (D₂O), (O(D₂O)₂) and ring tetramer-like cluster (O(D₂O)₃) on a Pt(111) surface. On a Pt(111)-3×3-Cl^- (θ=0.44) surface, water adsorption gives rise to a Pt(111)-(4×2)-(H₃O⁺+Cl^-) co-adsorption structure to form a hydrogen-bonding network between Cl^- and H₃O⁺ ions.     

A study of the removal of selenite and selenate from aqueous solutions using a magnetic iron/manganese oxide nanomaterial and ICP-MS

Selenium (Se) is naturally occurring in the environment and is an essential nutrient in mammals. However, environmental Se can be increased to toxic levels through different industrial practices. The potential adsorption of the Se oxoanions, selenite and selenate, from aqueous solutions onto nanosynthesized MnFe₂O₄ was investigated using batch techniques and DRC-ICP-MS spectroscopy. The nanomaterial (NM) was laboratory synthesized through slow titration of a mixture of Fe²⁺ and Mn²⁺ ions. X-ray diffraction and Scherrer's equation were used to determine the phase of the material and crystallite size, respectively. The effects of pH, reaction time, competitive anions, and the adsorption capacity of the synthesized NM to bind selenite and selenate were investigated. The Langmuir isotherm was used to determine the binding capacity of the NM. Results showed that the phase of the nanomaterial was similar to Jacobsite with a size of 27.5 nm. Results also showed that the sorption of either 100 ppb of selenite or selenate was pH independent in the pH range 2 to 6 and occurred within 5 min of contact time. The introduction of Cl⁻ and NO₃⁻ anions individually added to solution had no significant effect on the sorption of either selenite or selenate. However, it was found that the addition of SO₄²⁻ had a competitive effect only on the sorption of selenate, first seen at 10 ppm and more pronounced at 100 ppm of SO₄²⁻. In the presence of 100 ppm of PO₄³⁻, the adsorption of selenate decreased to 87% while selenite sorption decreased to 20%. From the Langmuir isotherm equation it was determined that the nano-Jacobsite had a selenite and selenate binding capacity of 6573.76 and 769.23 mg Se/kg of NM, respectively.     

Silver UPD ultra-thin film modified nanoporous gold electrode with applications in the electrochemical detection of chloride

Nanoporous noble metals are usually expected to exhibit much higher surface areas than smooth ones, making them of particular importance in many electrochemical applications. This paper describes a simple electrochemical method to modify a nanoporous Au (NPG) surface by using an under potentially deposited (UPD) Ag adlayer. The NPG electrode was obtained by the dealloying of Zn from Au_xZn_1−x in a 40-60 mol% zinc chloride-1-ethyl-3-methylimidazolium chloride (ZnCl₂-EMIC) ionic liquid. The Ag UPD modified nanoporous gold (NPG/Ag(UPD)) electrode possessed dual properties, including an intrinsic high surface area from the nanoporous structure and the characteristics of the Ag UPD adlayer. The potential utility of using NPG/Ag(UPD) for sensors was demonstrated by its excellent sensitivity and selectivity in the electrochemical determination of chloride ions. An atomic scale metal monolayer obtained in the UPD process was selected as a sensing agent. The long-term storability and operational stability of the electrode were strongly demonstrated. Specifically, two couples of redox waves at ∼552 mV and ∼272 mV, respectively, were observed in the cyclic voltammograms (CVs) of the NPG/Ag(UPD) after the adsorption of chloride ions. The first couple of redox waves was related to the UPD and silver stripping and the second couple of redox waves was induced by the adsorption of Cl⁻. The Cl⁻ adsorption process on the NPG/Ag(UPD) electrode followed the transient Langmuir adsorption kinetic model. The ratio of the integrated charges for these two anodic stripping peaks was selectively used to determine dilute chloride ion levels. The calibration curve was linear in the Cl⁻ concentration range of 0.5-30.0 μM.     

The impedance of liquid (Ga-In)-electrode of eutectic composition in aqueous electrolyte solutions in the absence and in the presence of surface-active ions

Adsorption behavior of anions at liquid (Ga-In)-electrode at a temperature of 305 K is studied by electrochemical impedance spectroscopy and cyclic voltammetry. The above-listed methods allowed evaluating the adsorbability of different ions. Equivalent circuit describing the experimental data in the presence and in the absence of ions Br⁻ and Cl⁻ is a contour comprising a resistance connected in series to a capacitance whose value remains constant over the frequency range from ∼300 Hz to 10 kHz. Analysis of the experimental data obtained by the mixed electrolyte method with excess of surface-inactive ion Cl and constant ionic strength 0.1 M in electrolyte solutions acidified down to pH 3 gave the charge of specifically adsorbed ions Br⁻ and Cl⁻ (σ₁) at the liquid (Ga-In)-electrode surface as 5.24 and 1.67 μC/cm², respectively, at the adsorbate maximal concentration and zero-charge potential. These values are characteristic of very weak specific adsorption. The σ₁ values found for the (Ga-In)-electrode were used in the calculations of different isotherms, aiming at the determination of adsorption parameters. The results of the study were compared with literature data obtained by different researchers for different metals in the presence of specifically adsorbing bromide and chloride ions.     

Adsorption of 4-aminopyridine on Co and Ag electrodes probed by SERS

The adsorption of 4-aminopyridine (4-AP) on Co and Ag electrodes in acid or alkaline solutions of KCl and KI electrolyte salts were monitored by the Surface-enhanced Raman Spectroscopy (SERS) technique. The SERS intensity for the Ag electrode was in 2 orders of magnitude higher than for the Co electrode, due to the enhancement of the Raman cross-section on Ag by the surface-plasmon excitation. In acidic chloride medium (pH 4), the SERS results for Ag electrodes indicate that the protonated form of 4-AP (4-APH⁺) adsorbs in the potential range of −0.1 to −0.6 V (Ag|AgCl|KCl sat) through hydrogen-bonding between 4-APH⁺ and Cl⁻ adsorbed on the electrode surface; at more negative potentials the neutral form 4-AP is the predominant adsorbed species. For Co electrode in the same medium, only bands due to neutral 4-AP were observed in the spectra at −0.8 and −0.9 V. For more negative potentials bands assigned to both 4-AP and 4-AP surface complex are observed, with the lasts being enhanced, as the potentials are turned more negative. In alkaline chloride medium (pH 13), for less negative potentials the bands assigned to free 4-AP were observed in the spectra of both Ag and Co surfaces. For more negative potentials, only bands assigned to the 4-AP surface complex were observed. For 0.1 mol L⁻¹ KI acidic or alkaline solutions, bands assigned to 4-AP and 4-APH⁺ were observed in a wider potential range than in chloride solutions. An adsorption scheme of 4-AP on Ag and Co is proposed for acidic and alkaline solutions.     

Optimizing Fe-Based Metal-Organic Frameworks through Ligand Conformation Regulation for Efficient Dye Adsorption and C2H2/CO2 Separation

Regulating the structure of metal-organic frameworks (MOFs) by adjusting the ligands reasonably is expected to enhance the interaction of MOFs on special molecules/ions, which has significant application value for the selective adsorption of guest molecules. Herein, two tricarboxylic ligands H₃L−Cl and H₃L−NH₂ were designed and synthesized based on the ligand H₃TTCA by replacing part of the benzene rings with C=C bonds and modifying the chlorine and amino groups on the 4-position of the benzene ring. Two 3D Fe-MOFs ( UPC-60-Cl and UPC-60-NH₂ ) with the new topology types were constructed. As the C=C bonds of the ligands have flexible torsion angles, UPC-60-Cl features three types of irregular 2D channels, while UPC-60-NH₂ has a cage with two types of windows on the surface. The synergistic effect of unique channels and modification of functional groups endows UPC-60-Cl and UPC-60-NH₂ with high adsorption capacity for organic dyes. Compound UPC-60-Cl shows high adsorption capacity for CV (147.2 mg g⁻¹), RHB (100.3 mg g⁻¹), and MO (220.9 mg g⁻¹), whereas UPC-60-NH₂ exhibits selective adsorption of MO (158.7 mg g⁻¹). Meanwhile, based on the diverse pore structure and modification of active sites, UPC-60-Cl and UPC-60-NH₂ show the selective separation of equimolar C₂H₂/CO₂. Therefore, reasonable regulation of organic ligands plays a significant role in guiding the structure diversification and performance improvement of MOFs.     

Adsorption of Cu(II) and Co(II) complexes on a silica gel surface chemically modified with 2-mercaptoimidazole

The isotherms of adsorption of MeX₂ (Me = Cu²⁺, Co²⁺; X = Cl^–, Br^–, ClO ₄ ^– ) by silica gel chemically modified with 2-mercaptoimidazole (SiMI) were studied in acetone and ethanol solutions, at 25 °C. Covalently attached 2-mercaptoimidazole molecule to silica gel surface adsorbs MeX₂ from solvent by forming a surface complex. The metal is bonded to the surface through the nitrogen atom of attached 2-mercaptoimidazole. At low loading, the electronic and ESR spectral parameters indicated that the Cu²⁺ complexes are in a distorted-tetragonal symmetry field. The d-d electronic transition spectra showed that for Cu(ClO₄)₂ complex, the peak of absorption did not change for any degree of metal loading and for Cl^– and Br^– complexes, the peak maxima shifted to higher energy with lower metal loading. The CoX₂(X = Cl^–, Br^–, ClO ₄ ^– ) analogues possess a distorted-tetrahedral field.     

pH值和阴离子对吡啶2,6-二羧酸在金纳米颗粒表面的增强拉曼散射的影响

表面增强拉曼散射(SERS)被用于检测细菌芽抱中的一种重要的标志物吡啶2,6-羧酸(DPA).以聚乙烯吡啶烷酮(PVP)为粘合剂,将60 nm的金粒子组装到表面打磨光滑的金电极上,制备稳定、灵敏的SERS基底.通过不同pH值下吸附在金基底上的DPA的SERS特征,考察DPA分子吸附构型发生的变化,并分析酸根离子对其吸附...     

Adsorption phenomena on polycrystalline gold electrode modified by Zn adatoms

Summary In this paper, experimental results obtained by the in-situ radiotracer and voltammetric studies of the competitive adsorption of the HSO₄^-/SO₄^2- (labeled with ³⁵S) and Cl^- (labeled with ³⁶Cl) anions on bare Au_poly substrate and Au_poly surfaces modified by the Zn adatoms in the lower pH region (pH≤4.5) are presented and discussed. In addition, some data on the formation of Zn adlayers (labeled with ⁶⁵Zn) are reported to demonstrate the complex features of the underpotential deposition (UPD) phenomenon. It has been revealed that (1) the relative adsorption strength of Cl^- ions on bare Au_poly is higher than that of H₂PO₄^-/PO₄^3- and HSO₄^-/SO₄^2- ions in the entire pH region studied; (2) anomalous tendency of the specific adsorption of anions on polycrystalline gold modified by Zn adatoms occurs at pH 4.5 as follows: PO₄^3->SO₄^2->Cl^->>ClO₄^- and (3) the UPD of Zn²⁺ ions on polycrystalline gold is measurable even from solutions containing 5 ^. 10^-8M Zn²⁺ over the entire potential range where the hydrogen evolution takes place.It is, however, plausible to assume that the coverage of the gold surface by Zn adatoms measured even at solution concentrations of c≥5 ^. 10^-4M does not exceed one monolayer.     

Synthesis and characterization of mercury(II) complexes with 2-styryl-1,3-benzothiazole (sb). Presence of two differently coordinated Hg(II) ions in the dinuclear complex Hg2Cl4(sb)3. Structural characterization of 2-styryl-1,3-benzothiazole and some of its derivatives

The molecular and crystal structures of the following compounds 2-styryl-1,3-benzothiazole, sb, (1), Hg₂Cl₄(sb)₃ (2), 1,3-bis(1,3-benzothiazol-2-yl)-2,4-diphenylcyclobutane (3) 1,3-bis(1,3-benzothiazol-2-yl)-2,4-bis(4-chlorophenyl)cyclobutane (4) and HgBr₂(sb)₂ (5) were determined by single-crystal X-ray diffractometry. The crystal structure of 1 consists of discrete sb molecules which are essentially planar. The dimeric molecules of 3 and 4 are characterized by a cyclobutane ring. In both isolated complexes 2 and 5, sb acts as a neutral monodentate ligand coordinated to the mercury atom through the thiazolyl nitrogen atom. The dinuclear complex 2 is characterized by the unique example of two differently coordinated Hg(II) ions bridged via a non-symmetrical linear Cl⁻ bridge. The first one is coordinated by one terminal and one bridging Cl⁻ ion and two thiazolyl nitrogen atoms in the form of distorted tetrahedron. The second one is bonded to two terminal Cl⁻ ions and the bridging Cl⁻ ion and one thiazolyl nitrogen atom in a 2+2 manner. In complex 5 the Hg(II) ion, which is situated on a crystallographic twofold axis, is tetrahedrally coordinated by two Br⁻ ions and two thiazolyl nitrogen atoms. Both complexes are characterized by stronger mercury-to-halide covalent bonds than mercury-to-nitrogen bonds, which are regarded as contacts shorter than the van der Waals radii sum of the corresponding atoms. The geometry of the sb ligand in both complexes 2 and 5 has not been changed remarkably from that one in the uncoordinated state due to not so strong bonds formation with the Hg(II) ion.     

Spectrophotometric analysis of iodide oxidation by chlorine in highly mineralized solutions

A spectrophotometric method for determining the concentrations of various iodine compounds (I⁻: initial compound, I₃⁻: under-oxidized iodine form, I₂ and I₂Cl⁻: target iodine forms and ICl₂⁻: over-oxidized iodine form) in their joint presence has been developed in order to study iodine processing from underground brines in Turkmenistan which are characterized by considerably higher mineralization and lower iodide content compared than those in Japan and USA. It was found that solutions with constant iodine concentrations and variable chloride concentrations had an isosbestic point at 474 nm with a molar absorbtivity of I₂ plus I₂Cl⁻ of 610.2 l mol⁻¹ cm⁻¹, while the absorbance of other iodine forms at this wavelength was negligible. This allowed us to use an absorbance at 474 nm for calculating the iodine concentration in solutions of variable chloride concentration. For calculating concentrations of other iodine compounds, absorbances at other wavelengths were used: 225 nm (I⁻ and ICl₂⁻), 248 nm (I₂Cl⁻) and 350 nm (I₃⁻). Beer’s law was valid for all iodine compounds in solutions with constant salt concentrations at all wavelengths. The authors have also developed a detailed algorithm for calculating the concentrations of the various iodine forms in their joint presence. The method was applied to solutions with various chloride concentrations and additions of microcomponents of natural solutions (bromide and iron ions, naphthenic acid and hydrogen sulfide). The overall precision for calculating the concentrations of various iodine compounds was <5% for solutions with an oxidant excess of <2-fold, and with chloride concentrations of <5 mol l⁻¹.     

Heavy metal adsorptivity of calcium-alginate-modified diethylenetriamine-silica gel and its application to a flow analytical system using flame atomic absorption spectrometry

This study aimed to evaluate the heavy metal adsorptivity of calcium-alginate-modified diethylenetriamine-silica gel (CaAD) and incorporate this biosorbent into a flow analytical system for heavy metal ions using flame atomic absorption spectrometry (FAAS). The biosorbent was synthesized by electrostatically coating calcium alginate onto diethylenetriamine (dien)-silica gel. Copper ion adsorption tests by a batch method showed that CaAD exhibited a higher adsorption rate compared with other biosorbents despite its low maximum adsorption capacity. Next, CaAD was packed into a 1 mL microcolumn, which was connected to a flow analytical system equipped with an FAAS instrument. The flow system quantitatively adsorbed heavy metals and enriched their concentrations. This quantitative adsorption was achieved for pH 3–4 solutions containing 1.0 × 10⁻⁶ M of heavy metal ions at a flow rate of 5.0 mL min⁻¹. Furthermore, the metal ions were successfully desorbed from CaAD at low nitric acid concentrations (0.05–0.15 M) than from the polyaminecarboxylic acid chelating resin (Chelex 100). Therefore, CaAD may be considered as a biosorbent that quickly adsorbs and easily desorbs analyte metal ions. In addition, the flow system enhanced the concentrations of heavy metals such as Cu²⁺, Zn²⁺, and Pb²⁺ by 50-fold. This new enrichment system successfully performed the separation and determination of Cu²⁺ (5.0 × 10⁻⁸ M) and Zn²⁺ (5.7 × 10⁻⁸ M) in a river water sample and Pb²⁺ (3.8 × 10⁻⁹ M) in a ground water sample.     

Mixed-ligand platinum(IV) complexes with amino acids and cytosine

Complex formation in platinum(IV)-cytosine-amino acid (glycine, α-alanine, lysine, or histidine) systems is studied using pH titration. Stability constants for 1:1:1 stoichiometry of complexes are determined. The stability of the mixed-ligand complexes varies in the following order: Lys < Ala < Gly < His. Reactions of aqueous solutions yields the following complexes: Pt(Cyt)(Gly^?)Cl₃ · 3H₂O (I), pt(Cyt)(Ala^?)Cl₃ · 3H₂O (II), Pt(Cyt)(Hist)Cl₄ · 2H₂O (III), and Pt(Cyt)(Lys)Cl₄ · 2H₂O (IV). ¹³C NMR, IR, and XPS spectra show that glycine and alanine are complexed via amino and carboxy groups, lysine via its α-amino group exclusively, and histidine via its amino group and heterocyclic N3 atom. Cytosine in these complexes is bidentate (it is complexed via C=O oxygen and N3 heterocyclic atoms).     

Determination of pH value of isoelectric solution and identification of passive iron surface phases using immersion method

Using the method of phase modeling, the pH values of solutions corresponding to the uncharged surface of passive iron and ferric oxide γ-Fe₂O₃ (pH₀) are compared. According to the theory of connected places, the charge of metal oxide surface is determined by the adsorption or desorption of hydrogen ions leading to a change in the potential drop at the oxide/solution interface. Preliminarily passivated iron electrode was washed with twice-distilled water and placed into 0.5 M NaNO₃ solution with various pH values; the variation in the potential (ΔE) with time was studied. The pH₀ value for passive electrode under the open-circuit conditions was determined by the dependence of ΔE on the pH value (pH₀ 6.2 ± 0.1). The pH₀ value was close to that for γ-Fe₂O₃ (pH₀ 6.2), which was determined by the method of potentiometrical titration of oxide suspension in the nitrate solution. The introduction of surface-active ions Ba²⁺ and Cl^? changes the charge of passive iron surface: Ba²⁺ ions increase the electrode potential, while Cl^? ions decrease it. Comparing the pH₀ values for passive electrode and metal oxides, one can identify the composition of passive electrode surface.