Nonlinear bending of simply supported symmetric laminated cross-ply rectangular plates

Based on the von Kármán-type theory of plates,nonlinear bending problems of simplysupported symmetric laminated cross-ply rectangular plates under the combined action ofpressure and inplane load are investigated in this paper.The solution which satisfies thegoverning equations and boundary conditions is obtained by using the double Fourier seriesmethod.     

Static shape control of laminated plate containing piezoelectric patches

By applying the Heaviside function, the equations governing laminated plates possessing spatially distributed piezoelectric patches have been established. Based on these equations, static shape control of laminated plates is discussed. By using a genetic and collocation algorithm, the optimal locations and scales of these piezoelectric patches have been selected. Numerical examples are presented to illustrate the efficiency of the algorithm and the piezoelectric actuators.     

Axisymmetric bending for thick laminated circular plate under a concentrated load

Ｎｏｗａｄａｙｓ,ｔｈｅｃｕｒｒｅｎｔｔｈｅｏｒｉｅｓｏｆｐｌａｔｅｓａｎｄｓｈｅｌｌｓ,ｓｕｃｈａｓＫｉｒｃｈｈｏｆｆ’ｓｔｈｉｎｐｌａｔｅｔｈｅｏｒｙａｎｄＲｅｉｓｓｎｅｒ’ｓｍｏｄｅｒａｔｅｌｙｔｈｉｃｋｐｌａｔｅｔｈｅｏｒｙｅｔｃ．,ａｒｅｅ...     

双模量面板泡沫铝芯圆形层合板的非线性弯曲

双模量材料是典型的拉压弹性模量不同的材料,在均匀外载荷作用下,双模量面板泡沫铝芯圆形层合板相当于三种不同材料组成的层合板。采用弹性理论建立了双模量面板泡沫铝芯圆形层合板在均布载荷作用下的静力平衡方程,利用该静力平衡方程确定了层合板的中性面位置。在此基础上建立了双模量面板泡沫铝芯圆形层合板的大挠度弯曲微分方程组,求得了层合板中心挠度与均布载荷的关系式。该方法计算结果与有限元计算结果的最大误差仅为3.8%,这说明该方法是可靠的。算例分析表明不考虑面板拉压弹性模量相异时其计算结果与实际情况相差较大,超过了工程上所允许的计算误差5%。所以,在计算双模量面板泡沫铝芯圆形层合板的非线性弯曲时,不宜采用相同弹性模量弹性理论,而应该采用拉压弹性模量不同的弹性理论。     

Impact response of a functionally graded piezoelectric plate with a vertical crack

The dynamic fracture problem for a functionally graded piezoelectric plate containing a crack perpendicular to the free boundaries is considered in this study. It is assumed that the electroelastic properties of the medium vary continuously in the thickness direction. Integral transform techniques and dislocation density function are employed to reduce the problem to the solution of a singular integral equation. Mode I dynamic energy density factors are presented for an internal crack as well as an edge crack for various values of dimensionless parameters representing the size and location of the crack and the material nonhomogeneity.     

非线性压电效应下压电弯曲执行器的弯曲

研究压电弯曲执行器在强电场作用下的非线性弯曲行为。考虑电致伸缩和电致弹性的非线性压电效应,导出了压电悬臂执行器自由端挠度或激励力和作用电场之间的非线性关系。结果表明,考虑非线性压电效应在很大的电场范围内都与实验结果吻合得很好,而线性压电效应只适合于低电场的情况。     

Interaction between bending and mobile charges in a piezoelectric semiconductor bimorph

We study the bending of a two-layer piezoelectric semiconductor plate (bimorph). The macroscopic theory of piezoelectric semiconductors is employed. A set of two-dimensional plate equations is derived from the three-dimensional equations. The plate equations exhibit direct couplings among bending, electric polarization along the plate thickness, and mobile charges. In the case of pure bending, a combination of physical and geometric parameters is identified which characterizes the strength of the interaction between the mechanical load and the distribution of mobile charges. In the bending of a rectangular plate under a distributed transverse mechanical load, it is shown that mobile charge distributions and potential barriers/wells develop in the plate. When the mechanical load is local and self-balanced, the induced carrier distributions and potential barriers/wells are also localized near the loading area. The results are fundamentally useful for mechanically manipulating mobile charges in piezoelectric semiconductor devices.     

非线性压电效应下压电弯曲执行器的动力分析

研究压电弯曲执行器在强电场作用下的非线性动力行为．考虑电致伸缩和电致弹性的非线性压电效应,导出了压电悬臂执行器变刚度的弯曲振动控制方程．利用非定常振动的渐近理论,讨论了弯曲压电执行器的动力特征．根据目前的非线性模型可以计算压电悬臂执行器的固有共振频率与电场的变化关系．结果表明压电执行器端头挠度谐振幅度随作用电场振幅的增大而增大,以及力学品质因数随电场振幅的增大而减少,并且与实验结果非常吻合．通过数值比较得到在电场频率随时间变化非常缓慢的情况下非定常振动问题可以近似地用定常振动来处理．     

Impact response of a piezoelectric layered composite plate with a crack

The dynamic response of a central crack in a piezoelectric layered composite plate under normal impact is analyzed. The crack is oriented normally to the interfaces. The Laplace and Fourier transform techniques are used to formulate the problem in terms of a singular integral equation. The order of stress singularity around the tip of the terminated crack is also obtained. Numerical calculations are carried out, and the main results presented are the variations of the dynamic stress intensity factor and the dynamic energy density factor versus time as functions of the geometric parameters and the piezoelectric material properties of the layered composite plate.     

组合荷载作用下层合板非线性弯曲的半解析摄动DQ法

研究不同边界约束层合薄板在面内与横向组合荷载作用下的非线性弯曲问题，给出了基于摄动技术，单向DQ格式和Galerkin法的半解析法，算例表明该方法是可靠有效的。     

具有压电材料薄板弯曲控制的有限元法

考虑一均匀各向同性薄板结构,在其上下表面离散分布状压电执行元件,在横向外载和电压共同作用下,分析板的弯曲变形,并通过变化作用于执行元件上的电压对板的变形进行控制,根据逆压电效应将电压转换成作用于板上的等效作用量,用Ｈａｍｉｌｔｏｎ原理导出压电结构板弯曲变形的有限元公式,并对环形板情况进行数值计算。     

The crack tip fields of orthotropic composite plate under bending

1MechhacalModelThefractUreproblemwhichisthesameasthatinpaper[I]isfurtherdiscussedinthispaper.TheanalysisoffractUrebehavioursnearcracktipforinfinitelinearelasticorthotropiccompositeplatewithacentralthroughcrackoflengthZaiscarriedout.ThegeometryandloadingcondihonsareshowninFig.1.Tosolvesuchaproblem,weneedtosolvethepanaldifferentialequationwiththefollowingboundaryconditions:wherewisdeflectionofcoddleplane;M.andM,arebendingmoment,Ma.istwistingmoment,andstiffnessmatrixFromthetheoryofplateL'],w…     

压电层合梁静动力学分析的高精度梁单元

给出了一个对复合材料压电层合梁进行数值分析的高精度压电层合梁单元。基于Shi三阶剪切变形板理论的位移场和Layer-wise理论的电势场,用力-电耦合的变分原理及Hamilton原理推导了压电层合梁单元列式。采用拟协调元方法推导了一个可显式给出单元刚度矩阵的两节点压电层合梁单元,并应用于压电层合梁的力-电耦合弯曲和自由振动分析。计算结果表明,该梁单元给出的梁挠度和固有频率与解析解吻合良好,并优于其它梁单元的计算结果,说明了本文所给压电层合梁单元的可靠性和准确性。研究结果可为力-电耦合作用下压电层合梁的力学分析提供一个简单、精确且高效的压电层合梁单元。     

Laminated piezoelectric plate for active underwater acoustic control

The pressure reflected from a bi-laminated piezoelectric plate has been determined using the Thomson-Haskell matrix method. The plate is composed of a piezoelectric layer with grounded vacuum and an elastic layer in contact with the fluid. An incident plane wave in the fluid medium strikes the plate at different angles. The required electric potential across the piezoelectric layer to cancel the reflection from the fluid/elastic boundary has been determined for the piezoelectric material PZT-5 at various thicknes parameters and incident frequencies. Project supported by the National Natural Science Foundation of China (No. 10172039).     

Analysis of laminated piezoelectric cylindrical shells

A new method is developed for three-dimensional stress analysis of laminated piezoelectric cylindrical shell with simple support. The shell can be subjected to various applied loadings, including distributed body force, inner and outer surface traction and potential. Each layer of the shell can be piezoelectric or elastic/dielectric, with perfect bonding assumed between each interface. The governing equations are solved by the state-space technique. Numerical results are presented to show the sensing and actuating effects of three-layered piezoelectric cylindrical shell. The project supported by the National Natural Science Foundation of China (19572027)     

Dynamic behavior of two parallel symmetric permeable cracks in a piezoelectric strip

The dynamic behavior of two parallel symmetric cracks in a piezoelectric strip under harmonic anti-plane shear waves is studied using the Schmidt method for permeable crack surface conditions. The cracks are parallel to the edge of the strip. By means of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations. These equations are solved using the schmidt method. The results show that the stress and the electric displacement intensity factors depend on the geometry of the cracks, the frequency of incident waves, the distance between cracks and the thickness of the strip. It is also found that the electric displacement intensity factors for the permeable crack surface conditions are much smaller than those for the impermeable crack surface conditions. Project supported by the Post Doctoral Science Foundation of Heilongjiang Province, the Natural Science Foundation of Heilongjiang Province, the National Science Foundation with the Excellent Young Investigator Award (No. 19725209) and the Scientific Research Foundation of Harbin Institute of Technology (HIT.2000.30).     

Dynamic buckling of a 2-DOF imperfect system with symmetric imperfections

Non-linear dynamic buckling of a two-degree-of freedom (2-DOF) imperfect planar system with symmetric imperfections under a step load of infinite duration (autonomous system) is thoroughly discussed using energy and geometric considerations. This system under the same load applied statically exhibits (prior to limit point) an unstable symmetric bifurcation lying on the non-linear primary equilibrium path. With the aid of the total energy-balance equation of the system and the particular geometry (due to symmetric imperfections) of the plane curve corresponding to the zero level total potential energy “surface” exact dynamic buckling loads are obtained without solving the non-linear initial-value problem. The efficiency and the reliability of the technique proposed herein is demonstrated with the aid of various dynamic buckling analyses which are compared with numerical simulation using the Verner-Runge-Kutta scheme, the accuracy of which is checked via the energy-balance equation.     

Electroelastic field for an impermeable anti-plane shear crack in a piezoelectric ceramics plate

Electroelastic behavior of a cracked piezoelectric ceramics plate subjected to four cases of combined mechanical-electrical loads is analyzed. The integral transform method is applied to convert the problem involving an impermeable anti-plane crack to dual integral equations. Solving the resulting equations, the explicit analytic expressions for electroelastic field along the crack line and the intensity factors of relevant quantities near the crack tip and the mechanical strain energy release rate are obtained. The known results for an infinite piezoelectric ceramics plane containing an impermeable anti-plane crack are recovered from the present results only if the thickness of the plate h → ∞. Biography: LI Xian-fang (1964-)     

ELECTROELASTIC FIELD FOR AN IMPERMEABLE ANTI-PLANE SHEAR CRACK IN A PIEZOELECTRIC CERAMICS PLATE

ＩｎｔｒｏｄｕｃｔｉｏｎＤｕｅｔｏｔｈｅｉｎｔｒｉｎｓｉｃｃｏｕｐｌｉｎｇｃｈａｒａｃｔｅｒｉｓｔｉｃｓｂｅｔｗｅｅｎｅｌｅｃｔｒｉｃａｎｄｅｌａｓｔｉｃｂｅｈａｖｉｏｒｓ,ｔｈａｔｉｓ,ａｐｐｌｉｅｄｍｅｃｈａｎｉｃａｌｌｏａｄｉｎｇｐｒｏｄｕｃｅｓｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ａｓｗｅｌｌａｓｅｌｅｃｔｒｉｃｆｉｅｌｄ ,ａｎｄｃｏｎｖｅｒｓｅｌｙｅｌｅｃｔｒｉｃｆｉｅｌｄｃａｎｇｉｖｅｒｉｓｅｔｏｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ｐｉｅｚｏｅｌｅｃｔｒｉｃｍａｔｅｒｉａｌｓｈａｖｅ…     

层合结构压电器件的机电耦合响应

压电传感嚣和致动器都可以看成是由压电材料层和非压电(弹性)材料层交替铺设而成。对于这类任意铺设的层合板悬臂梁结构,推导出了表示力学变形与外加电场之间耦合效应的解析表达式。进而,又推导出了两类(一类为单层压电-弹性层。另一类为双层压电-弹性层)层合型悬臂梁结构机电耦合性能的解析公式。在该机电耦合模型中,包括了两个压电常数d211和d222。最后。通过比较解析解、实验值以及有限元计算结果,发现它们吻合得很好。